OMAPDSS: Add Sharp LS037V7DW01 panel driver
Add Sharp LS037V7DW01 panel driver which uses the new DSS device model
and DSS ops.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/omap2/displays-new/Kconfig
index 3dd8bf9..917db6e 100644
--- a/drivers/video/omap2/displays-new/Kconfig
+++ b/drivers/video/omap2/displays-new/Kconfig
@@ -49,4 +49,10 @@
depends on SPI
help
LCD Panel used on the Gumstix Overo Palo35
+
+config DISPLAY_PANEL_SHARP_LS037V7DW01
+ tristate "Sharp LS037V7DW01 LCD Panel"
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ LCD Panel used in TI's SDP3430 and EVM boards
endmenu
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/omap2/displays-new/Makefile
index a5ec42f..dde7b8d 100644
--- a/drivers/video/omap2/displays-new/Makefile
+++ b/drivers/video/omap2/displays-new/Makefile
@@ -7,3 +7,4 @@
obj-$(CONFIG_DISPLAY_PANEL_DSI_CM) += panel-dsi-cm.o
obj-$(CONFIG_DISPLAY_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
obj-$(CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
+obj-$(CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
diff --git a/drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c
new file mode 100644
index 0000000..72a4fb5
--- /dev/null
+++ b/drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c
@@ -0,0 +1,324 @@
+/*
+ * LCD panel driver for Sharp LS037V7DW01
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+ struct omap_dss_device dssdev;
+ struct omap_dss_device *in;
+
+ int data_lines;
+
+ struct omap_video_timings videomode;
+
+ int resb_gpio;
+ int ini_gpio;
+ int mo_gpio;
+ int lr_gpio;
+ int ud_gpio;
+};
+
+static const struct omap_video_timings sharp_ls_timings = {
+ .x_res = 480,
+ .y_res = 640,
+
+ .pixel_clock = 19200,
+
+ .hsw = 2,
+ .hfp = 1,
+ .hbp = 28,
+
+ .vsw = 1,
+ .vfp = 1,
+ .vbp = 1,
+
+ .vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
+ .hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
+ .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
+ .de_level = OMAPDSS_SIG_ACTIVE_HIGH,
+ .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int sharp_ls_connect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (omapdss_device_is_connected(dssdev))
+ return 0;
+
+ r = in->ops.dpi->connect(in, dssdev);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static void sharp_ls_disconnect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (!omapdss_device_is_connected(dssdev))
+ return;
+
+ in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int sharp_ls_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (!omapdss_device_is_connected(dssdev))
+ return -ENODEV;
+
+ if (omapdss_device_is_enabled(dssdev))
+ return 0;
+
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ in->ops.dpi->set_timings(in, &ddata->videomode);
+
+ r = in->ops.dpi->enable(in);
+ if (r)
+ return r;
+
+ /* wait couple of vsyncs until enabling the LCD */
+ msleep(50);
+
+ if (gpio_is_valid(ddata->resb_gpio))
+ gpio_set_value_cansleep(ddata->resb_gpio, 1);
+
+ if (gpio_is_valid(ddata->ini_gpio))
+ gpio_set_value_cansleep(ddata->ini_gpio, 1);
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
+}
+
+static void sharp_ls_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (!omapdss_device_is_enabled(dssdev))
+ return;
+
+ if (gpio_is_valid(ddata->ini_gpio))
+ gpio_set_value_cansleep(ddata->ini_gpio, 0);
+
+ if (gpio_is_valid(ddata->resb_gpio))
+ gpio_set_value_cansleep(ddata->resb_gpio, 0);
+
+ /* wait at least 5 vsyncs after disabling the LCD */
+
+ msleep(100);
+
+ in->ops.dpi->disable(in);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void sharp_ls_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ ddata->videomode = *timings;
+ dssdev->panel.timings = *timings;
+
+ in->ops.dpi->set_timings(in, timings);
+}
+
+static void sharp_ls_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ *timings = ddata->videomode;
+}
+
+static int sharp_ls_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver sharp_ls_ops = {
+ .connect = sharp_ls_connect,
+ .disconnect = sharp_ls_disconnect,
+
+ .enable = sharp_ls_enable,
+ .disable = sharp_ls_disable,
+
+ .set_timings = sharp_ls_set_timings,
+ .get_timings = sharp_ls_get_timings,
+ .check_timings = sharp_ls_check_timings,
+
+ .get_resolution = omapdss_default_get_resolution,
+};
+
+static int sharp_ls_probe_pdata(struct platform_device *pdev)
+{
+ const struct panel_sharp_ls037v7dw01_platform_data *pdata;
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *dssdev, *in;
+
+ pdata = dev_get_platdata(&pdev->dev);
+
+ in = omap_dss_find_output(pdata->source);
+ if (in == NULL) {
+ dev_err(&pdev->dev, "failed to find video source '%s'\n",
+ pdata->source);
+ return -EPROBE_DEFER;
+ }
+
+ ddata->in = in;
+
+ ddata->data_lines = pdata->data_lines;
+
+ dssdev = &ddata->dssdev;
+ dssdev->name = pdata->name;
+
+ ddata->resb_gpio = pdata->resb_gpio;
+ ddata->ini_gpio = pdata->ini_gpio;
+ ddata->mo_gpio = pdata->mo_gpio;
+ ddata->lr_gpio = pdata->lr_gpio;
+ ddata->ud_gpio = pdata->ud_gpio;
+
+ return 0;
+}
+
+static int sharp_ls_probe(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata;
+ struct omap_dss_device *dssdev;
+ int r;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (ddata == NULL)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ddata);
+
+ if (dev_get_platdata(&pdev->dev)) {
+ r = sharp_ls_probe_pdata(pdev);
+ if (r)
+ return r;
+ } else {
+ return -ENODEV;
+ }
+
+ if (gpio_is_valid(ddata->mo_gpio)) {
+ r = devm_gpio_request_one(&pdev->dev, ddata->mo_gpio,
+ GPIOF_OUT_INIT_LOW, "lcd MO");
+ if (r)
+ goto err_gpio;
+ }
+
+ if (gpio_is_valid(ddata->lr_gpio)) {
+ r = devm_gpio_request_one(&pdev->dev, ddata->lr_gpio,
+ GPIOF_OUT_INIT_HIGH, "lcd LR");
+ if (r)
+ goto err_gpio;
+ }
+
+ if (gpio_is_valid(ddata->ud_gpio)) {
+ r = devm_gpio_request_one(&pdev->dev, ddata->ud_gpio,
+ GPIOF_OUT_INIT_HIGH, "lcd UD");
+ if (r)
+ goto err_gpio;
+ }
+
+ if (gpio_is_valid(ddata->resb_gpio)) {
+ r = devm_gpio_request_one(&pdev->dev, ddata->resb_gpio,
+ GPIOF_OUT_INIT_LOW, "lcd RESB");
+ if (r)
+ goto err_gpio;
+ }
+
+ if (gpio_is_valid(ddata->ini_gpio)) {
+ r = devm_gpio_request_one(&pdev->dev, ddata->ini_gpio,
+ GPIOF_OUT_INIT_LOW, "lcd INI");
+ if (r)
+ goto err_gpio;
+ }
+
+ ddata->videomode = sharp_ls_timings;
+
+ dssdev = &ddata->dssdev;
+ dssdev->dev = &pdev->dev;
+ dssdev->driver = &sharp_ls_ops;
+ dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+ dssdev->owner = THIS_MODULE;
+ dssdev->panel.timings = ddata->videomode;
+ dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+ r = omapdss_register_display(dssdev);
+ if (r) {
+ dev_err(&pdev->dev, "Failed to register panel\n");
+ goto err_reg;
+ }
+
+ return 0;
+
+err_reg:
+err_gpio:
+ omap_dss_put_device(ddata->in);
+ return r;
+}
+
+static int __exit sharp_ls_remove(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct omap_dss_device *dssdev = &ddata->dssdev;
+ struct omap_dss_device *in = ddata->in;
+
+ omapdss_unregister_display(dssdev);
+
+ sharp_ls_disable(dssdev);
+ sharp_ls_disconnect(dssdev);
+
+ omap_dss_put_device(in);
+
+ return 0;
+}
+
+static struct platform_driver sharp_ls_driver = {
+ .probe = sharp_ls_probe,
+ .remove = __exit_p(sharp_ls_remove),
+ .driver = {
+ .name = "panel-sharp-ls037v7dw01",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(sharp_ls_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Sharp LS037V7DW01 Panel Driver");
+MODULE_LICENSE("GPL");
diff --git a/include/video/omap-panel-data.h b/include/video/omap-panel-data.h
index baf4045..5a6e1e8 100644
--- a/include/video/omap-panel-data.h
+++ b/include/video/omap-panel-data.h
@@ -298,4 +298,28 @@
int enable_gpio;
};
+/**
+ * panel_sharp_ls037v7dw01 platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @data_lines: number of DPI datalines
+ * @resb_gpio: reset signal GPIO
+ * @ini_gpio: power on control GPIO
+ * @mo_gpio: selection for resolution(VGA/QVGA) GPIO
+ * @lr_gpio: selection for horizontal scanning direction GPIO
+ * @ud_gpio: selection for vertical scanning direction GPIO
+ */
+struct panel_sharp_ls037v7dw01_platform_data {
+ const char *name;
+ const char *source;
+
+ int data_lines;
+
+ int resb_gpio;
+ int ini_gpio;
+ int mo_gpio;
+ int lr_gpio;
+ int ud_gpio;
+};
+
#endif /* __OMAP_PANEL_DATA_H */