[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3
NPIV support is added to the driver. It utilizes the interfaces of
the fc transport for the creation and deletion of vports. Within the
driver, a new Scsi_Host is created for each NPIV instance, and is
paired with a new instance of a FC port. This allows N FC Port
elements to share a single Adapter.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/lpfc/lpfc_vport.h b/drivers/scsi/lpfc/lpfc_vport.h
new file mode 100644
index 0000000..f223550
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_vport.h
@@ -0,0 +1,113 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2004-2006 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
+ * www.emulex.com *
+ * Portions Copyright (C) 2004-2005 Christoph Hellwig *
+ * *
+ * This program is free software; you can redistribute it and/or *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
+ *******************************************************************/
+
+#ifndef _H_LPFC_VPORT
+#define _H_LPFC_VPORT
+
+/* API version values (each will be an individual bit) */
+#define VPORT_API_VERSION_1 0x01
+
+/* Values returned via lpfc_vport_getinfo() */
+struct vport_info {
+
+ uint32_t api_versions;
+ uint8_t linktype;
+#define VPORT_TYPE_PHYSICAL 0
+#define VPORT_TYPE_VIRTUAL 1
+
+ uint8_t state;
+#define VPORT_STATE_OFFLINE 0
+#define VPORT_STATE_ACTIVE 1
+#define VPORT_STATE_FAILED 2
+
+ uint8_t fail_reason;
+ uint8_t prev_fail_reason;
+#define VPORT_FAIL_UNKNOWN 0
+#define VPORT_FAIL_LINKDOWN 1
+#define VPORT_FAIL_FAB_UNSUPPORTED 2
+#define VPORT_FAIL_FAB_NORESOURCES 3
+#define VPORT_FAIL_FAB_LOGOUT 4
+#define VPORT_FAIL_ADAP_NORESOURCES 5
+
+ uint8_t node_name[8]; /* WWNN */
+ uint8_t port_name[8]; /* WWPN */
+
+ struct Scsi_Host *shost;
+
+/* Following values are valid only on physical links */
+ uint32_t vports_max;
+ uint32_t vports_inuse;
+ uint32_t rpi_max;
+ uint32_t rpi_inuse;
+#define VPORT_CNT_INVALID 0xFFFFFFFF
+};
+
+/* data used in link creation */
+struct vport_data {
+ uint32_t api_version;
+
+ uint32_t options;
+#define VPORT_OPT_AUTORETRY 0x01
+
+ uint8_t node_name[8]; /* WWNN */
+ uint8_t port_name[8]; /* WWPN */
+
+/*
+ * Upon successful creation, vport_shost will point to the new Scsi_Host
+ * structure for the new virtual link.
+ */
+ struct Scsi_Host *vport_shost;
+};
+
+/* API function return codes */
+#define VPORT_OK 0
+#define VPORT_ERROR -1
+#define VPORT_INVAL -2
+#define VPORT_NOMEM -3
+#define VPORT_NORESOURCES -4
+
+int lpfc_vport_create(struct fc_vport *, bool);
+int lpfc_vport_delete(struct fc_vport *);
+int lpfc_vport_getinfo(struct Scsi_Host *, struct vport_info *);
+int lpfc_vport_tgt_remove(struct Scsi_Host *, uint, uint);
+
+/*
+ * queuecommand VPORT-specific return codes. Specified in the host byte code.
+ * Returned when the virtual link has failed or is not active.
+ */
+#define DID_VPORT_ERROR 0x0f
+
+#define VPORT_INFO 0x1
+#define VPORT_CREATE 0x2
+#define VPORT_DELETE 0x4
+
+struct vport_cmd_tag {
+ uint32_t cmd;
+ struct vport_data cdata;
+ struct vport_info cinfo;
+ void *vport;
+ int vport_num;
+};
+
+void lpfc_vport_set_state(struct lpfc_vport *vport,
+ enum fc_vport_state new_state);
+
+#endif /* H_LPFC_VPORT */