regulator: Do proper shift to set correct bit for DC[2|5]_HIB_MODE setting
DC[2|5]_HIB_MODE is BIT 12 of DCDC[2|5] Control register.
WM8350_DC2_HIB_MODE_ACTIVE/WM8350_DC2_HIB_MODE_DISABLE are defined as 1/0.
Thus we need to left shift WM8350_DC2_HIB_MODE_SHIFT bits.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 1c54821..ff34654 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -575,13 +575,13 @@
val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL)
& ~WM8350_DC2_HIB_MODE_MASK;
wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val |
- WM8350_DC2_HIB_MODE_ACTIVE);
+ (WM8350_DC2_HIB_MODE_ACTIVE << WM8350_DC2_HIB_MODE_SHIFT));
break;
case WM8350_DCDC_5:
val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL)
- & ~WM8350_DC2_HIB_MODE_MASK;
+ & ~WM8350_DC5_HIB_MODE_MASK;
wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val |
- WM8350_DC5_HIB_MODE_ACTIVE);
+ (WM8350_DC5_HIB_MODE_ACTIVE << WM8350_DC5_HIB_MODE_SHIFT));
break;
default:
return -EINVAL;
@@ -600,13 +600,13 @@
val = wm8350_reg_read(wm8350, WM8350_DCDC2_CONTROL)
& ~WM8350_DC2_HIB_MODE_MASK;
wm8350_reg_write(wm8350, WM8350_DCDC2_CONTROL, val |
- WM8350_DC2_HIB_MODE_DISABLE);
+ (WM8350_DC2_HIB_MODE_DISABLE << WM8350_DC2_HIB_MODE_SHIFT));
break;
case WM8350_DCDC_5:
val = wm8350_reg_read(wm8350, WM8350_DCDC5_CONTROL)
- & ~WM8350_DC2_HIB_MODE_MASK;
+ & ~WM8350_DC5_HIB_MODE_MASK;
wm8350_reg_write(wm8350, WM8350_DCDC5_CONTROL, val |
- WM8350_DC2_HIB_MODE_DISABLE);
+ (WM8350_DC5_HIB_MODE_DISABLE << WM8350_DC5_HIB_MODE_SHIFT));
break;
default:
return -EINVAL;