[S390] convert dcssblk and extmem printks messages to pr_xxx macros.
Signed-off-by: Hongjie Yang <hongjie@us.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index b1b204c..26ffc6a 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -4,6 +4,9 @@
* Authors: Carsten Otte, Stefan Weinhuber, Gerald Schaefer
*/
+#define KMSG_COMPONENT "dcssblk"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/ctype.h>
@@ -17,21 +20,11 @@
#include <linux/interrupt.h>
#include <asm/s390_rdev.h>
-//#define DCSSBLK_DEBUG /* Debug messages on/off */
#define DCSSBLK_NAME "dcssblk"
#define DCSSBLK_MINORS_PER_DISK 1
#define DCSSBLK_PARM_LEN 400
#define DCSS_BUS_ID_SIZE 20
-#ifdef DCSSBLK_DEBUG
-#define PRINT_DEBUG(x...) printk(KERN_DEBUG DCSSBLK_NAME " debug: " x)
-#else
-#define PRINT_DEBUG(x...) do {} while (0)
-#endif
-#define PRINT_INFO(x...) printk(KERN_INFO DCSSBLK_NAME " info: " x)
-#define PRINT_WARN(x...) printk(KERN_WARNING DCSSBLK_NAME " warning: " x)
-#define PRINT_ERR(x...) printk(KERN_ERR DCSSBLK_NAME " error: " x)
-
static int dcssblk_open(struct block_device *bdev, fmode_t mode);
static int dcssblk_release(struct gendisk *disk, fmode_t mode);
static int dcssblk_make_request(struct request_queue *q, struct bio *bio);
@@ -262,10 +255,9 @@
/* check continuity */
for (i = 0; i < dev_info->num_of_segments - 1; i++) {
if ((sort_list[i].end + 1) != sort_list[i+1].start) {
- PRINT_ERR("Segment %s is not contiguous with "
- "segment %s\n",
- sort_list[i].segment_name,
- sort_list[i+1].segment_name);
+ pr_err("Adjacent DCSSs %s and %s are not "
+ "contiguous\n", sort_list[i].segment_name,
+ sort_list[i+1].segment_name);
rc = -EINVAL;
goto out;
}
@@ -276,10 +268,10 @@
!(sort_list[i+1].segment_type &
SEGMENT_EXCLUSIVE) ||
(sort_list[i+1].segment_type == SEG_TYPE_ER)) {
- PRINT_ERR("Segment %s has different type from "
- "segment %s\n",
- sort_list[i].segment_name,
- sort_list[i+1].segment_name);
+ pr_err("DCSS %s and DCSS %s have "
+ "incompatible types\n",
+ sort_list[i].segment_name,
+ sort_list[i+1].segment_name);
rc = -EINVAL;
goto out;
}
@@ -381,8 +373,9 @@
} else if (inbuf[0] == '0') {
/* reload segments in exclusive mode */
if (dev_info->segment_type == SEG_TYPE_SC) {
- PRINT_ERR("Segment type SC (%s) cannot be loaded in "
- "non-shared mode\n", dev_info->segment_name);
+ pr_err("DCSS %s is of type SC and cannot be "
+ "loaded as exclusive-writable\n",
+ dev_info->segment_name);
rc = -EINVAL;
goto out;
}
@@ -405,9 +398,8 @@
goto out;
removeseg:
- PRINT_ERR("Could not reload segment(s) of the device %s, removing "
- "segment(s) now!\n",
- dev_info->segment_name);
+ pr_err("DCSS device %s is removed after a failed access mode "
+ "change\n", dev_info->segment_name);
temp = entry;
list_for_each_entry(entry, &dev_info->seg_list, lh) {
if (entry != temp)
@@ -455,17 +447,17 @@
if (inbuf[0] == '1') {
if (atomic_read(&dev_info->use_count) == 0) {
// device is idle => we save immediately
- PRINT_INFO("Saving segment(s) of the device %s\n",
- dev_info->segment_name);
+ pr_info("All DCSSs that map to device %s are "
+ "saved\n", dev_info->segment_name);
list_for_each_entry(entry, &dev_info->seg_list, lh) {
segment_save(entry->segment_name);
}
} else {
// device is busy => we save it when it becomes
// idle in dcssblk_release
- PRINT_INFO("Device %s is currently busy, segment(s) "
- "will be saved when it becomes idle...\n",
- dev_info->segment_name);
+ pr_info("Device %s is in use, its DCSSs will be "
+ "saved when it becomes idle\n",
+ dev_info->segment_name);
dev_info->save_pending = 1;
}
} else if (inbuf[0] == '0') {
@@ -473,9 +465,9 @@
// device is busy & the user wants to undo his save
// request
dev_info->save_pending = 0;
- PRINT_INFO("Pending save for segment(s) of the device "
- "%s deactivated\n",
- dev_info->segment_name);
+ pr_info("A pending save request for device %s "
+ "has been canceled\n",
+ dev_info->segment_name);
}
} else {
up_write(&dcssblk_devices_sem);
@@ -615,9 +607,8 @@
seg_byte_size = (dev_info->end - dev_info->start + 1);
set_capacity(dev_info->gd, seg_byte_size >> 9); // size in sectors
- PRINT_INFO("Loaded segment(s) %s, size = %lu Byte, "
- "capacity = %lu (512 Byte) sectors\n", local_buf,
- seg_byte_size, seg_byte_size >> 9);
+ pr_info("Loaded %s with total size %lu bytes and capacity %lu "
+ "sectors\n", local_buf, seg_byte_size, seg_byte_size >> 9);
dev_info->save_pending = 0;
dev_info->is_shared = 1;
@@ -745,13 +736,15 @@
dev_info = dcssblk_get_device_by_name(local_buf);
if (dev_info == NULL) {
up_write(&dcssblk_devices_sem);
- PRINT_WARN("Device %s is not loaded!\n", local_buf);
+ pr_warning("Device %s cannot be removed because it is not a "
+ "known device\n", local_buf);
rc = -ENODEV;
goto out_buf;
}
if (atomic_read(&dev_info->use_count) != 0) {
up_write(&dcssblk_devices_sem);
- PRINT_WARN("Device %s is in use!\n", local_buf);
+ pr_warning("Device %s cannot be removed while it is in "
+ "use\n", local_buf);
rc = -EBUSY;
goto out_buf;
}
@@ -808,8 +801,8 @@
down_write(&dcssblk_devices_sem);
if (atomic_dec_and_test(&dev_info->use_count)
&& (dev_info->save_pending)) {
- PRINT_INFO("Device %s became idle and is being saved now\n",
- dev_info->segment_name);
+ pr_info("Device %s has become idle and is being saved "
+ "now\n", dev_info->segment_name);
list_for_each_entry(entry, &dev_info->seg_list, lh) {
segment_save(entry->segment_name);
}
@@ -852,7 +845,8 @@
case SEG_TYPE_SC:
/* cannot write to these segments */
if (bio_data_dir(bio) == WRITE) {
- PRINT_WARN("rejecting write to ro device %s\n",
+ pr_warning("Writing to %s failed because it "
+ "is a read-only device\n",
dev_name(&dev_info->dev));
goto fail;
}