| /* |
| * linux/arch/arm/mach-ep93xx/gpio.c |
| * |
| * Generic EP93xx GPIO handling |
| * |
| * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com> |
| * |
| * Based on code originally from: |
| * linux/arch/arm/mach-ep93xx/core.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/seq_file.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <linux/irq.h> |
| |
| #include <mach/hardware.h> |
| |
| /************************************************************************* |
| * Interrupt handling for EP93xx on-chip GPIOs |
| *************************************************************************/ |
| static unsigned char gpio_int_unmasked[3]; |
| static unsigned char gpio_int_enabled[3]; |
| static unsigned char gpio_int_type1[3]; |
| static unsigned char gpio_int_type2[3]; |
| static unsigned char gpio_int_debounce[3]; |
| |
| /* Port ordering is: A B F */ |
| static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; |
| static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; |
| static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; |
| static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 }; |
| static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 }; |
| |
| static void ep93xx_gpio_update_int_params(unsigned port) |
| { |
| BUG_ON(port > 2); |
| |
| __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port])); |
| |
| __raw_writeb(gpio_int_type2[port], |
| EP93XX_GPIO_REG(int_type2_register_offset[port])); |
| |
| __raw_writeb(gpio_int_type1[port], |
| EP93XX_GPIO_REG(int_type1_register_offset[port])); |
| |
| __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port], |
| EP93XX_GPIO_REG(int_en_register_offset[port])); |
| } |
| |
| static inline void ep93xx_gpio_int_mask(unsigned line) |
| { |
| gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); |
| } |
| |
| static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable) |
| { |
| int line = irq_to_gpio(irq); |
| int port = line >> 3; |
| int port_mask = 1 << (line & 7); |
| |
| if (enable) |
| gpio_int_debounce[port] |= port_mask; |
| else |
| gpio_int_debounce[port] &= ~port_mask; |
| |
| __raw_writeb(gpio_int_debounce[port], |
| EP93XX_GPIO_REG(int_debounce_register_offset[port])); |
| } |
| |
| static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) |
| { |
| unsigned char status; |
| int i; |
| |
| status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); |
| for (i = 0; i < 8; i++) { |
| if (status & (1 << i)) { |
| int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i; |
| generic_handle_irq(gpio_irq); |
| } |
| } |
| |
| status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); |
| for (i = 0; i < 8; i++) { |
| if (status & (1 << i)) { |
| int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; |
| generic_handle_irq(gpio_irq); |
| } |
| } |
| } |
| |
| static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) |
| { |
| /* |
| * map discontiguous hw irq range to continous sw irq range: |
| * |
| * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) |
| */ |
| int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */ |
| int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx; |
| |
| generic_handle_irq(gpio_irq); |
| } |
| |
| static void ep93xx_gpio_irq_ack(struct irq_data *d) |
| { |
| int line = irq_to_gpio(d->irq); |
| int port = line >> 3; |
| int port_mask = 1 << (line & 7); |
| |
| if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { |
| gpio_int_type2[port] ^= port_mask; /* switch edge direction */ |
| ep93xx_gpio_update_int_params(port); |
| } |
| |
| __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); |
| } |
| |
| static void ep93xx_gpio_irq_mask_ack(struct irq_data *d) |
| { |
| int line = irq_to_gpio(d->irq); |
| int port = line >> 3; |
| int port_mask = 1 << (line & 7); |
| |
| if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) |
| gpio_int_type2[port] ^= port_mask; /* switch edge direction */ |
| |
| gpio_int_unmasked[port] &= ~port_mask; |
| ep93xx_gpio_update_int_params(port); |
| |
| __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); |
| } |
| |
| static void ep93xx_gpio_irq_mask(struct irq_data *d) |
| { |
| int line = irq_to_gpio(d->irq); |
| int port = line >> 3; |
| |
| gpio_int_unmasked[port] &= ~(1 << (line & 7)); |
| ep93xx_gpio_update_int_params(port); |
| } |
| |
| static void ep93xx_gpio_irq_unmask(struct irq_data *d) |
| { |
| int line = irq_to_gpio(d->irq); |
| int port = line >> 3; |
| |
| gpio_int_unmasked[port] |= 1 << (line & 7); |
| ep93xx_gpio_update_int_params(port); |
| } |
| |
| /* |
| * gpio_int_type1 controls whether the interrupt is level (0) or |
| * edge (1) triggered, while gpio_int_type2 controls whether it |
| * triggers on low/falling (0) or high/rising (1). |
| */ |
| static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) |
| { |
| const int gpio = irq_to_gpio(d->irq); |
| const int port = gpio >> 3; |
| const int port_mask = 1 << (gpio & 7); |
| irq_flow_handler_t handler; |
| |
| gpio_direction_input(gpio); |
| |
| switch (type) { |
| case IRQ_TYPE_EDGE_RISING: |
| gpio_int_type1[port] |= port_mask; |
| gpio_int_type2[port] |= port_mask; |
| handler = handle_edge_irq; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| gpio_int_type1[port] |= port_mask; |
| gpio_int_type2[port] &= ~port_mask; |
| handler = handle_edge_irq; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| gpio_int_type1[port] &= ~port_mask; |
| gpio_int_type2[port] |= port_mask; |
| handler = handle_level_irq; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| gpio_int_type1[port] &= ~port_mask; |
| gpio_int_type2[port] &= ~port_mask; |
| handler = handle_level_irq; |
| break; |
| case IRQ_TYPE_EDGE_BOTH: |
| gpio_int_type1[port] |= port_mask; |
| /* set initial polarity based on current input level */ |
| if (gpio_get_value(gpio)) |
| gpio_int_type2[port] &= ~port_mask; /* falling */ |
| else |
| gpio_int_type2[port] |= port_mask; /* rising */ |
| handler = handle_edge_irq; |
| break; |
| default: |
| pr_err("failed to set irq type %d for gpio %d\n", type, gpio); |
| return -EINVAL; |
| } |
| |
| __irq_set_handler_locked(d->irq, handler); |
| |
| gpio_int_enabled[port] |= port_mask; |
| |
| ep93xx_gpio_update_int_params(port); |
| |
| return 0; |
| } |
| |
| static struct irq_chip ep93xx_gpio_irq_chip = { |
| .name = "GPIO", |
| .irq_ack = ep93xx_gpio_irq_ack, |
| .irq_mask_ack = ep93xx_gpio_irq_mask_ack, |
| .irq_mask = ep93xx_gpio_irq_mask, |
| .irq_unmask = ep93xx_gpio_irq_unmask, |
| .irq_set_type = ep93xx_gpio_irq_type, |
| }; |
| |
| void __init ep93xx_gpio_init_irq(void) |
| { |
| int gpio_irq; |
| |
| for (gpio_irq = gpio_to_irq(0); |
| gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { |
| irq_set_chip(gpio_irq, &ep93xx_gpio_irq_chip); |
| irq_set_handler(gpio_irq, handle_level_irq); |
| set_irq_flags(gpio_irq, IRQF_VALID); |
| } |
| |
| irq_set_chained_handler(IRQ_EP93XX_GPIO_AB, |
| ep93xx_gpio_ab_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO0MUX, |
| ep93xx_gpio_f_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO1MUX, |
| ep93xx_gpio_f_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO2MUX, |
| ep93xx_gpio_f_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO3MUX, |
| ep93xx_gpio_f_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO4MUX, |
| ep93xx_gpio_f_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO5MUX, |
| ep93xx_gpio_f_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO6MUX, |
| ep93xx_gpio_f_irq_handler); |
| irq_set_chained_handler(IRQ_EP93XX_GPIO7MUX, |
| ep93xx_gpio_f_irq_handler); |
| } |
| |
| |
| /************************************************************************* |
| * gpiolib interface for EP93xx on-chip GPIOs |
| *************************************************************************/ |
| struct ep93xx_gpio_chip { |
| struct gpio_chip chip; |
| |
| void __iomem *data_reg; |
| void __iomem *data_dir_reg; |
| }; |
| |
| #define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip) |
| |
| static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset) |
| { |
| struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); |
| unsigned long flags; |
| u8 v; |
| |
| local_irq_save(flags); |
| v = __raw_readb(ep93xx_chip->data_dir_reg); |
| v &= ~(1 << offset); |
| __raw_writeb(v, ep93xx_chip->data_dir_reg); |
| local_irq_restore(flags); |
| |
| return 0; |
| } |
| |
| static int ep93xx_gpio_direction_output(struct gpio_chip *chip, |
| unsigned offset, int val) |
| { |
| struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); |
| unsigned long flags; |
| int line; |
| u8 v; |
| |
| local_irq_save(flags); |
| |
| /* Set the value */ |
| v = __raw_readb(ep93xx_chip->data_reg); |
| if (val) |
| v |= (1 << offset); |
| else |
| v &= ~(1 << offset); |
| __raw_writeb(v, ep93xx_chip->data_reg); |
| |
| /* Drive as an output */ |
| line = chip->base + offset; |
| if (line <= EP93XX_GPIO_LINE_MAX_IRQ) { |
| /* Ports A/B/F */ |
| ep93xx_gpio_int_mask(line); |
| ep93xx_gpio_update_int_params(line >> 3); |
| } |
| |
| v = __raw_readb(ep93xx_chip->data_dir_reg); |
| v |= (1 << offset); |
| __raw_writeb(v, ep93xx_chip->data_dir_reg); |
| |
| local_irq_restore(flags); |
| |
| return 0; |
| } |
| |
| static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); |
| |
| return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset)); |
| } |
| |
| static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) |
| { |
| struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); |
| unsigned long flags; |
| u8 v; |
| |
| local_irq_save(flags); |
| v = __raw_readb(ep93xx_chip->data_reg); |
| if (val) |
| v |= (1 << offset); |
| else |
| v &= ~(1 << offset); |
| __raw_writeb(v, ep93xx_chip->data_reg); |
| local_irq_restore(flags); |
| } |
| |
| static int ep93xx_gpio_set_debounce(struct gpio_chip *chip, |
| unsigned offset, unsigned debounce) |
| { |
| int gpio = chip->base + offset; |
| int irq = gpio_to_irq(gpio); |
| |
| if (irq < 0) |
| return -EINVAL; |
| |
| ep93xx_gpio_int_debounce(irq, debounce ? true : false); |
| |
| return 0; |
| } |
| |
| static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) |
| { |
| struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); |
| u8 data_reg, data_dir_reg; |
| int gpio, i; |
| |
| data_reg = __raw_readb(ep93xx_chip->data_reg); |
| data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg); |
| |
| gpio = ep93xx_chip->chip.base; |
| for (i = 0; i < chip->ngpio; i++, gpio++) { |
| int is_out = data_dir_reg & (1 << i); |
| int irq = gpio_to_irq(gpio); |
| |
| seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s %s\n", |
| chip->label, i, gpio, |
| gpiochip_is_requested(chip, i) ? : "", |
| is_out ? "out" : "in ", |
| (data_reg & (1<< i)) ? "hi" : "lo", |
| (!is_out && irq>= 0) ? "(interrupt)" : ""); |
| } |
| } |
| |
| #define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \ |
| { \ |
| .chip = { \ |
| .label = name, \ |
| .direction_input = ep93xx_gpio_direction_input, \ |
| .direction_output = ep93xx_gpio_direction_output, \ |
| .get = ep93xx_gpio_get, \ |
| .set = ep93xx_gpio_set, \ |
| .dbg_show = ep93xx_gpio_dbg_show, \ |
| .base = base_gpio, \ |
| .ngpio = 8, \ |
| }, \ |
| .data_reg = EP93XX_GPIO_REG(dr), \ |
| .data_dir_reg = EP93XX_GPIO_REG(ddr), \ |
| } |
| |
| static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = { |
| EP93XX_GPIO_BANK("A", 0x00, 0x10, 0), |
| EP93XX_GPIO_BANK("B", 0x04, 0x14, 8), |
| EP93XX_GPIO_BANK("C", 0x08, 0x18, 40), |
| EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24), |
| EP93XX_GPIO_BANK("E", 0x20, 0x24, 32), |
| EP93XX_GPIO_BANK("F", 0x30, 0x34, 16), |
| EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48), |
| EP93XX_GPIO_BANK("H", 0x40, 0x44, 56), |
| }; |
| |
| void __init ep93xx_gpio_init(void) |
| { |
| int i; |
| |
| /* Set Ports C, D, E, G, and H for GPIO use */ |
| ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | |
| EP93XX_SYSCON_DEVCFG_GONK | |
| EP93XX_SYSCON_DEVCFG_EONIDE | |
| EP93XX_SYSCON_DEVCFG_GONIDE | |
| EP93XX_SYSCON_DEVCFG_HONIDE); |
| |
| for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) { |
| struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip; |
| |
| /* |
| * Ports A, B, and F support input debouncing when |
| * used as interrupts. |
| */ |
| if (!strcmp(chip->label, "A") || |
| !strcmp(chip->label, "B") || |
| !strcmp(chip->label, "F")) |
| chip->set_debounce = ep93xx_gpio_set_debounce; |
| |
| gpiochip_add(chip); |
| } |
| } |