ARM: Kirkwood: Add DT description of QNAP 419
Re-implement the Marvell Kirkwood ts41x-setup.c in DT.
As with the QNAP 119, there are two variants, depending on which SoC
has been used. They differ on Ethernet PHY addresses and number of
PCIe busses.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Ian Campbell <ijc@hellion.org.uk> (kirkwood-ts419-6281.dtb)
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8535c13..cfd364d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -116,7 +116,9 @@
kirkwood-sheevaplug-esata.dtb \
kirkwood-topkick.dtb \
kirkwood-ts219-6281.dtb \
- kirkwood-ts219-6282.dtb
+ kirkwood-ts219-6282.dtb \
+ kirkwood-ts419-6281.dtb \
+ kirkwood-ts419-6282.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6281.dts b/arch/arm/boot/dts/kirkwood-ts419-6281.dts
new file mode 100644
index 0000000..aa22aa8
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts419-6281.dts
@@ -0,0 +1,20 @@
+/*
+ * Device Tree file for QNAP TS41X with 6281 SoC
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-ts219.dtsi"
+#include "kirkwood-ts419.dtsi"
+
+ðphy0 { reg = <8>; };
+ðphy1 { reg = <0>; };
diff --git a/arch/arm/boot/dts/kirkwood-ts419-6282.dts b/arch/arm/boot/dts/kirkwood-ts419-6282.dts
new file mode 100644
index 0000000..d7512d4
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts419-6282.dts
@@ -0,0 +1,32 @@
+/*
+ * Device Tree file for QNAP TS41X with 6282 SoC
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-ts219.dtsi"
+#include "kirkwood-ts419.dtsi"
+
+/ {
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie@2,0 {
+ status = "okay";
+ };
+ };
+ };
+};
+
+ðphy0 { reg = <0>; };
+ðphy1 { reg = <1>; };
diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/kirkwood-ts419.dtsi
new file mode 100644
index 0000000..1a9c624
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-ts419.dtsi
@@ -0,0 +1,75 @@
+/*
+ * Device Tree include file for QNAP TS41X
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/ {
+ model = "QNAP TS419 family";
+ compatible = "qnap,ts419", "marvell,kirkwood";
+
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+ pinctrl-names = "default";
+
+ pmx_USB_copy_button: pmx-USB-copy-button {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_reset_button: pmx-reset-button {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ /*
+ * JP1 indicates if an LCD module is installed
+ * on the serial port (0), or if the port is used
+ * as a console (1).
+ */
+ pmx_jumper_jp1: pmx-jumper_jp1 {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "USB Copy";
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+ button@2 {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy1: ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ /* overwrite reg property in board file */
+ };
+};
+
+ð1 {
+ status = "okay";
+ ethernet1-port@0 {
+ phy-handle = <ðphy1>;
+ };
+};