[PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
diff --git a/block/Kconfig b/block/Kconfig
index b6f5f0a..9af6c61 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -1,6 +1,24 @@
#
# Block layer core configuration
#
+config BLOCK
+ bool "Enable the block layer"
+ default y
+ help
+ This permits the block layer to be removed from the kernel if it's not
+ needed (on some embedded devices for example). If this option is
+ disabled, then blockdev files will become unusable and some
+ filesystems (such as ext3) will become unavailable.
+
+ This option will also disable SCSI character devices and USB storage
+ since they make use of various block layer definitions and
+ facilities.
+
+ Say Y here unless you know you really don't want to mount disks and
+ suchlike.
+
+if BLOCK
+
#XXX - it makes sense to enable this only for 32-bit subarch's, not for x86_64
#for instance.
config LBD
@@ -33,4 +51,6 @@
If unsure, say Y.
+endif
+
source block/Kconfig.iosched
diff --git a/block/Kconfig.iosched b/block/Kconfig.iosched
index 48d090e..903f0d3 100644
--- a/block/Kconfig.iosched
+++ b/block/Kconfig.iosched
@@ -1,3 +1,4 @@
+if BLOCK
menu "IO Schedulers"
@@ -67,3 +68,5 @@
default "noop" if DEFAULT_NOOP
endmenu
+
+endif
diff --git a/block/Makefile b/block/Makefile
index c05de0e..4b84d0d 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -2,7 +2,7 @@
# Makefile for the kernel block layer
#
-obj-y := elevator.o ll_rw_blk.o ioctl.o genhd.o scsi_ioctl.o
+obj-$(CONFIG_BLOCK) := elevator.o ll_rw_blk.o ioctl.o genhd.o scsi_ioctl.o
obj-$(CONFIG_IOSCHED_NOOP) += noop-iosched.o
obj-$(CONFIG_IOSCHED_AS) += as-iosched.o
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index b5382ce..422e31d 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -2,6 +2,8 @@
# Block device driver configuration
#
+if BLOCK
+
menu "Block devices"
config BLK_DEV_FD
@@ -468,3 +470,5 @@
devices like the Coraid EtherDrive (R) Storage Blade.
endmenu
+
+endif
diff --git a/drivers/cdrom/Kconfig b/drivers/cdrom/Kconfig
index ff5652d..4b12e90 100644
--- a/drivers/cdrom/Kconfig
+++ b/drivers/cdrom/Kconfig
@@ -3,7 +3,7 @@
#
menu "Old CD-ROM drivers (not SCSI, not IDE)"
- depends on ISA
+ depends on ISA && BLOCK
config CD_NO_IDESCSI
bool "Support non-SCSI/IDE/ATAPI CDROM drives"
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 4cc619e..bde1c66 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -1006,6 +1006,7 @@
config RAW_DRIVER
tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
+ depends on BLOCK
help
The raw driver permits block devices to be bound to /dev/raw/rawN.
Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 4c3a5ca..b430a12 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -655,6 +655,7 @@
add_timer_randomness(irq_timer_state[irq], 0x100 + irq);
}
+#ifdef CONFIG_BLOCK
void add_disk_randomness(struct gendisk *disk)
{
if (!disk || !disk->random)
@@ -667,6 +668,7 @@
}
EXPORT_SYMBOL(add_disk_randomness);
+#endif
#define EXTRACT_SIZE 10
@@ -918,6 +920,7 @@
}
}
+#ifdef CONFIG_BLOCK
void rand_initialize_disk(struct gendisk *disk)
{
struct timer_rand_state *state;
@@ -932,6 +935,7 @@
disk->random = state;
}
}
+#endif
static ssize_t
random_read(struct file * file, char __user * buf, size_t nbytes, loff_t *ppos)
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index b6fb167..69d627b 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -4,6 +4,8 @@
# Andre Hedrick <andre@linux-ide.org>
#
+if BLOCK
+
menu "ATA/ATAPI/MFM/RLL support"
config IDE
@@ -1082,3 +1084,5 @@
endif
endmenu
+
+endif
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
index bf869ed..6dd31a2 100644
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -2,6 +2,8 @@
# Block device driver configuration
#
+if BLOCK
+
menu "Multi-device support (RAID and LVM)"
config MD
@@ -251,3 +253,4 @@
endmenu
+endif
diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig
index fef6771..6443392 100644
--- a/drivers/message/i2o/Kconfig
+++ b/drivers/message/i2o/Kconfig
@@ -88,7 +88,7 @@
config I2O_BLOCK
tristate "I2O Block OSM"
- depends on I2O
+ depends on I2O && BLOCK
---help---
Include support for the I2O Block OSM. The Block OSM presents disk
and other structured block devices to the operating system. If you
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 45bcf09..f540bd8 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -21,7 +21,7 @@
config MMC_BLOCK
tristate "MMC block device driver"
- depends on MMC
+ depends on MMC && BLOCK
default y
help
Say Y here to enable the MMC block device driver support.
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index d2957e3..b1f6e03 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -24,7 +24,8 @@
obj-$(CONFIG_MMC_OMAP) += omap.o
obj-$(CONFIG_MMC_AT91RM9200) += at91_mci.o
-mmc_core-y := mmc.o mmc_queue.o mmc_sysfs.o
+mmc_core-y := mmc.o mmc_sysfs.o
+mmc_core-$(CONFIG_BLOCK) += mmc_queue.o
ifeq ($(CONFIG_MMC_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index a03e862..a304b34 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -166,7 +166,7 @@
config MTD_BLOCK
tristate "Caching block device access to MTD devices"
- depends on MTD
+ depends on MTD && BLOCK
---help---
Although most flash chips have an erase size too large to be useful
as block devices, it is possible to use MTD devices which are based
@@ -188,7 +188,7 @@
config MTD_BLOCK_RO
tristate "Readonly block device access to MTD devices"
- depends on MTD_BLOCK!=y && MTD
+ depends on MTD_BLOCK!=y && MTD && BLOCK
help
This allows you to mount read-only file systems (such as cramfs)
from an MTD device, without the overhead (and danger) of the caching
@@ -199,7 +199,7 @@
config FTL
tristate "FTL (Flash Translation Layer) support"
- depends on MTD
+ depends on MTD && BLOCK
---help---
This provides support for the original Flash Translation Layer which
is part of the PCMCIA specification. It uses a kind of pseudo-
@@ -215,7 +215,7 @@
config NFTL
tristate "NFTL (NAND Flash Translation Layer) support"
- depends on MTD
+ depends on MTD && BLOCK
---help---
This provides support for the NAND Flash Translation Layer which is
used on M-Systems' DiskOnChip devices. It uses a kind of pseudo-
@@ -238,7 +238,7 @@
config INFTL
tristate "INFTL (Inverse NAND Flash Translation Layer) support"
- depends on MTD
+ depends on MTD && BLOCK
---help---
This provides support for the Inverse NAND Flash Translation
Layer which is used on M-Systems' newer DiskOnChip devices. It
@@ -255,7 +255,7 @@
config RFD_FTL
tristate "Resident Flash Disk (Flash Translation Layer) support"
- depends on MTD
+ depends on MTD && BLOCK
---help---
This provides support for the flash translation layer known
as the Resident Flash Disk (RFD), as used by the Embedded BIOS
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 16c02b5..440f685 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -136,7 +136,7 @@
config MTD_BLOCK2MTD
tristate "MTD using block device"
- depends on MTD
+ depends on MTD && BLOCK
help
This driver allows a block device to appear as an MTD. It would
generally be used in the following cases:
diff --git a/drivers/s390/block/Kconfig b/drivers/s390/block/Kconfig
index 929d6ff..b250c53 100644
--- a/drivers/s390/block/Kconfig
+++ b/drivers/s390/block/Kconfig
@@ -1,4 +1,4 @@
-if S390
+if S390 && BLOCK
comment "S/390 block device drivers"
depends on S390
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index c4dfcc9..dab0820 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -3,11 +3,13 @@
config RAID_ATTRS
tristate "RAID Transport Class"
default n
+ depends on BLOCK
---help---
Provides RAID
config SCSI
tristate "SCSI device support"
+ depends on BLOCK
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
any other SCSI device under Linux, say Y and make sure that you know
diff --git a/fs/Kconfig b/fs/Kconfig
index 4fd9efa..1453d2d 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -4,6 +4,8 @@
menu "File systems"
+if BLOCK
+
config EXT2_FS
tristate "Second extended fs support"
help
@@ -399,6 +401,8 @@
If you don't know whether you need it, then you don't need it:
answer N.
+endif
+
config INOTIFY
bool "Inotify file change notification support"
default y
@@ -530,6 +534,7 @@
If you want to develop a userspace FS, or if you want to use
a filesystem based on FUSE, answer Y or M.
+if BLOCK
menu "CD-ROM/DVD Filesystems"
config ISO9660_FS
@@ -597,7 +602,9 @@
depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
endmenu
+endif
+if BLOCK
menu "DOS/FAT/NT Filesystems"
config FAT_FS
@@ -782,6 +789,7 @@
It is perfectly safe to say N here.
endmenu
+endif
menu "Pseudo filesystems"
@@ -939,7 +947,7 @@
config ADFS_FS
tristate "ADFS file system support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on BLOCK && EXPERIMENTAL
help
The Acorn Disc Filing System is the standard file system of the
RiscOS operating system which runs on Acorn's ARM-based Risc PC
@@ -967,7 +975,7 @@
config AFFS_FS
tristate "Amiga FFS file system support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on BLOCK && EXPERIMENTAL
help
The Fast File System (FFS) is the common file system used on hard
disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y
@@ -989,7 +997,7 @@
config HFS_FS
tristate "Apple Macintosh file system support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on BLOCK && EXPERIMENTAL
select NLS
help
If you say Y here, you will be able to mount Macintosh-formatted
@@ -1002,6 +1010,7 @@
config HFSPLUS_FS
tristate "Apple Extended HFS file system support"
+ depends on BLOCK
select NLS
select NLS_UTF8
help
@@ -1015,7 +1024,7 @@
config BEFS_FS
tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on BLOCK && EXPERIMENTAL
select NLS
help
The BeOS File System (BeFS) is the native file system of Be, Inc's
@@ -1042,7 +1051,7 @@
config BFS_FS
tristate "BFS file system support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on BLOCK && EXPERIMENTAL
help
Boot File System (BFS) is a file system used under SCO UnixWare to
allow the bootloader access to the kernel image and other important
@@ -1064,7 +1073,7 @@
config EFS_FS
tristate "EFS file system support (read only) (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on BLOCK && EXPERIMENTAL
help
EFS is an older file system used for non-ISO9660 CD-ROMs and hard
disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
@@ -1079,7 +1088,7 @@
config JFFS_FS
tristate "Journalling Flash File System (JFFS) support"
- depends on MTD
+ depends on MTD && BLOCK
help
JFFS is the Journaling Flash File System developed by Axis
Communications in Sweden, aimed at providing a crash/powerdown-safe
@@ -1264,6 +1273,7 @@
config CRAMFS
tristate "Compressed ROM file system support (cramfs)"
+ depends on BLOCK
select ZLIB_INFLATE
help
Saying Y here includes support for CramFs (Compressed ROM File
@@ -1283,6 +1293,7 @@
config VXFS_FS
tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
+ depends on BLOCK
help
FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
file system format. VERITAS VxFS(TM) is the standard file system
@@ -1300,6 +1311,7 @@
config HPFS_FS
tristate "OS/2 HPFS file system support"
+ depends on BLOCK
help
OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
is the file system used for organizing files on OS/2 hard disk
@@ -1316,6 +1328,7 @@
config QNX4FS_FS
tristate "QNX4 file system support (read only)"
+ depends on BLOCK
help
This is the file system used by the real-time operating systems
QNX 4 and QNX 6 (the latter is also called QNX RTP).
@@ -1343,6 +1356,7 @@
config SYSV_FS
tristate "System V/Xenix/V7/Coherent file system support"
+ depends on BLOCK
help
SCO, Xenix and Coherent are commercial Unix systems for Intel
machines, and Version 7 was used on the DEC PDP-11. Saying Y
@@ -1381,6 +1395,7 @@
config UFS_FS
tristate "UFS file system support (read only)"
+ depends on BLOCK
help
BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
OpenBSD and NeXTstep) use a file system called UFS. Some System V
@@ -1959,11 +1974,13 @@
endmenu
+if BLOCK
menu "Partition Types"
source "fs/partitions/Kconfig"
endmenu
+endif
source "fs/nls/Kconfig"
diff --git a/fs/Makefile b/fs/Makefile
index 46b8cfe..a503e6c 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -5,12 +5,18 @@
# Rewritten to use lists instead of if-statements.
#
-obj-y := open.o read_write.o file_table.o buffer.o bio.o super.o \
- block_dev.o char_dev.o stat.o exec.o pipe.o namei.o fcntl.o \
+obj-y := open.o read_write.o file_table.o super.o \
+ char_dev.o stat.o exec.o pipe.o namei.o fcntl.o \
ioctl.o readdir.o select.o fifo.o locks.o dcache.o inode.o \
attr.o bad_inode.o file.o filesystems.o namespace.o aio.o \
- seq_file.o xattr.o libfs.o fs-writeback.o mpage.o direct-io.o \
- ioprio.o pnode.o drop_caches.o splice.o sync.o
+ seq_file.o xattr.o libfs.o fs-writeback.o \
+ pnode.o drop_caches.o splice.o sync.o
+
+ifeq ($(CONFIG_BLOCK),y)
+obj-y += buffer.o bio.o block_dev.o direct-io.o mpage.o ioprio.o
+else
+obj-y += no-block.o
+endif
obj-$(CONFIG_INOTIFY) += inotify.o
obj-$(CONFIG_INOTIFY_USER) += inotify_user.o
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index e1a5643..64b3453 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -645,6 +645,7 @@
}
#endif
+#ifdef CONFIG_BLOCK
struct hd_geometry32 {
unsigned char heads;
unsigned char sectors;
@@ -869,6 +870,7 @@
}
return err;
}
+#endif /* CONFIG_BLOCK */
struct sock_fprog32 {
unsigned short len;
@@ -992,6 +994,7 @@
}
+#ifdef CONFIG_BLOCK
struct mtget32 {
compat_long_t mt_type;
compat_long_t mt_resid;
@@ -1164,6 +1167,7 @@
return err;
}
+#endif /* CONFIG_BLOCK */
#ifdef CONFIG_VT
@@ -1491,6 +1495,7 @@
return -EINVAL;
}
+#ifdef CONFIG_BLOCK
static int broken_blkgetsize(unsigned int fd, unsigned int cmd, unsigned long arg)
{
/* The mkswap binary hard codes it to Intel value :-((( */
@@ -1525,12 +1530,14 @@
return sys_ioctl(fd, cmd, (unsigned long)a);
}
+#endif
static int ioc_settimeout(unsigned int fd, unsigned int cmd, unsigned long arg)
{
return rw_long(fd, AUTOFS_IOC_SETTIMEOUT, arg);
}
+#ifdef CONFIG_BLOCK
/* Fix sizeof(sizeof()) breakage */
#define BLKBSZGET_32 _IOR(0x12,112,int)
#define BLKBSZSET_32 _IOW(0x12,113,int)
@@ -1551,6 +1558,7 @@
{
return sys_ioctl(fd, BLKGETSIZE64, (unsigned long)compat_ptr(arg));
}
+#endif
/* Bluetooth ioctls */
#define HCIUARTSETPROTO _IOW('U', 200, int)
@@ -1571,6 +1579,7 @@
#define HIDPGETCONNLIST _IOR('H', 210, int)
#define HIDPGETCONNINFO _IOR('H', 211, int)
+#ifdef CONFIG_BLOCK
struct floppy_struct32 {
compat_uint_t size;
compat_uint_t sect;
@@ -1895,6 +1904,7 @@
kfree(karg);
return err;
}
+#endif
struct mtd_oob_buf32 {
u_int32_t start;
@@ -1936,6 +1946,7 @@
return err;
}
+#ifdef CONFIG_BLOCK
struct raw32_config_request
{
compat_int_t raw_minor;
@@ -2000,6 +2011,7 @@
}
return ret;
}
+#endif /* CONFIG_BLOCK */
struct serial_struct32 {
compat_int_t type;
@@ -2606,6 +2618,7 @@
HANDLE_IOCTL(SIOCRTMSG, ret_einval)
HANDLE_IOCTL(SIOCGSTAMP, do_siocgstamp)
#endif
+#ifdef CONFIG_BLOCK
HANDLE_IOCTL(HDIO_GETGEO, hdio_getgeo)
HANDLE_IOCTL(BLKRAGET, w_long)
HANDLE_IOCTL(BLKGETSIZE, w_long)
@@ -2631,14 +2644,17 @@
HANDLE_IOCTL(FDWERRORGET32, fd_ioctl_trans)
HANDLE_IOCTL(SG_IO,sg_ioctl_trans)
HANDLE_IOCTL(SG_GET_REQUEST_TABLE, sg_grt_trans)
+#endif
HANDLE_IOCTL(PPPIOCGIDLE32, ppp_ioctl_trans)
HANDLE_IOCTL(PPPIOCSCOMPRESS32, ppp_ioctl_trans)
HANDLE_IOCTL(PPPIOCSPASS32, ppp_sock_fprog_ioctl_trans)
HANDLE_IOCTL(PPPIOCSACTIVE32, ppp_sock_fprog_ioctl_trans)
+#ifdef CONFIG_BLOCK
HANDLE_IOCTL(MTIOCGET32, mt_ioctl_trans)
HANDLE_IOCTL(MTIOCPOS32, mt_ioctl_trans)
HANDLE_IOCTL(CDROMREADAUDIO, cdrom_ioctl_trans)
HANDLE_IOCTL(CDROM_SEND_PACKET, cdrom_ioctl_trans)
+#endif
#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,unsigned int)
HANDLE_IOCTL(AUTOFS_IOC_SETTIMEOUT32, ioc_settimeout)
#ifdef CONFIG_VT
@@ -2677,12 +2693,14 @@
HANDLE_IOCTL(SONET_GETFRAMING, do_atm_ioctl)
HANDLE_IOCTL(SONET_GETFRSENSE, do_atm_ioctl)
/* block stuff */
+#ifdef CONFIG_BLOCK
HANDLE_IOCTL(BLKBSZGET_32, do_blkbszget)
HANDLE_IOCTL(BLKBSZSET_32, do_blkbszset)
HANDLE_IOCTL(BLKGETSIZE64_32, do_blkgetsize64)
/* Raw devices */
HANDLE_IOCTL(RAW_SETBIND, raw_ioctl)
HANDLE_IOCTL(RAW_GETBIND, raw_ioctl)
+#endif
/* Serial */
HANDLE_IOCTL(TIOCGSERIAL, serial_struct_ioctl)
HANDLE_IOCTL(TIOCSSERIAL, serial_struct_ioctl)
diff --git a/fs/internal.h b/fs/internal.h
index f662b70..f07147d 100644
--- a/fs/internal.h
+++ b/fs/internal.h
@@ -14,10 +14,16 @@
/*
* block_dev.c
*/
+#ifdef CONFIG_BLOCK
extern struct super_block *blockdev_superblock;
extern void __init bdev_cache_init(void);
#define sb_is_blkdev_sb(sb) ((sb) == blockdev_superblock)
+#else
+static inline void bdev_cache_init(void) {}
+
+#define sb_is_blkdev_sb(sb) 0
+#endif
/*
* char_dev.c
diff --git a/fs/no-block.c b/fs/no-block.c
new file mode 100644
index 0000000..d269a93
--- /dev/null
+++ b/fs/no-block.c
@@ -0,0 +1,22 @@
+/* no-block.c: implementation of routines required for non-BLOCK configuration
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/fs.h>
+
+static int no_blkdev_open(struct inode * inode, struct file * filp)
+{
+ return -ENODEV;
+}
+
+const struct file_operations def_blk_fops = {
+ .open = no_blkdev_open,
+};
diff --git a/fs/partitions/Makefile b/fs/partitions/Makefile
index d713ce6..67e665f 100644
--- a/fs/partitions/Makefile
+++ b/fs/partitions/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
-obj-y := check.o
+obj-$(CONFIG_BLOCK) := check.o
obj-$(CONFIG_ACORN_PARTITION) += acorn.o
obj-$(CONFIG_AMIGA_PARTITION) += amiga.o
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index 5bbd608..66bc425 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -277,12 +277,15 @@
if (i == 0)
seq_printf(f, "Character devices:\n");
chrdev_show(f, i);
- } else {
+ }
+#ifdef CONFIG_BLOCK
+ else {
i -= CHRDEV_MAJOR_HASH_SIZE;
if (i == 0)
seq_printf(f, "\nBlock devices:\n");
blkdev_show(f, i);
}
+#endif
return 0;
}
@@ -355,6 +358,7 @@
}
#endif
+#ifdef CONFIG_BLOCK
extern struct seq_operations partitions_op;
static int partitions_open(struct inode *inode, struct file *file)
{
@@ -378,6 +382,7 @@
.llseek = seq_lseek,
.release = seq_release,
};
+#endif
#ifdef CONFIG_MODULES
extern struct seq_operations modules_op;
@@ -695,7 +700,9 @@
entry->proc_fops = &proc_kmsg_operations;
create_seq_entry("devices", 0, &proc_devinfo_operations);
create_seq_entry("cpuinfo", 0, &proc_cpuinfo_operations);
+#ifdef CONFIG_BLOCK
create_seq_entry("partitions", 0, &proc_partitions_operations);
+#endif
create_seq_entry("stat", 0, &proc_stat_operations);
create_seq_entry("interrupts", 0, &proc_interrupts_operations);
#ifdef CONFIG_SLAB
@@ -707,7 +714,9 @@
create_seq_entry("buddyinfo",S_IRUGO, &fragmentation_file_operations);
create_seq_entry("vmstat",S_IRUGO, &proc_vmstat_file_operations);
create_seq_entry("zoneinfo",S_IRUGO, &proc_zoneinfo_file_operations);
+#ifdef CONFIG_BLOCK
create_seq_entry("diskstats", 0, &proc_diskstats_operations);
+#endif
#ifdef CONFIG_MODULES
create_seq_entry("modules", 0, &proc_modules_operations);
#endif
diff --git a/fs/quota.c b/fs/quota.c
index d6a2be8..b9dae76 100644
--- a/fs/quota.c
+++ b/fs/quota.c
@@ -338,6 +338,34 @@
}
/*
+ * look up a superblock on which quota ops will be performed
+ * - use the name of a block device to find the superblock thereon
+ */
+static inline struct super_block *quotactl_block(const char __user *special)
+{
+#ifdef CONFIG_BLOCK
+ struct block_device *bdev;
+ struct super_block *sb;
+ char *tmp = getname(special);
+
+ if (IS_ERR(tmp))
+ return ERR_PTR(PTR_ERR(tmp));
+ bdev = lookup_bdev(tmp);
+ putname(tmp);
+ if (IS_ERR(bdev))
+ return ERR_PTR(PTR_ERR(bdev));
+ sb = get_super(bdev);
+ bdput(bdev);
+ if (!sb)
+ return ERR_PTR(-ENODEV);
+
+ return sb;
+#else
+ return ERR_PTR(-ENODEV);
+#endif
+}
+
+/*
* This is the system call interface. This communicates with
* the user-level programs. Currently this only supports diskquota
* calls. Maybe we need to add the process quotas etc. in the future,
@@ -347,25 +375,15 @@
{
uint cmds, type;
struct super_block *sb = NULL;
- struct block_device *bdev;
- char *tmp;
int ret;
cmds = cmd >> SUBCMDSHIFT;
type = cmd & SUBCMDMASK;
if (cmds != Q_SYNC || special) {
- tmp = getname(special);
- if (IS_ERR(tmp))
- return PTR_ERR(tmp);
- bdev = lookup_bdev(tmp);
- putname(tmp);
- if (IS_ERR(bdev))
- return PTR_ERR(bdev);
- sb = get_super(bdev);
- bdput(bdev);
- if (!sb)
- return -ENODEV;
+ sb = quotactl_block(special);
+ if (IS_ERR(sb))
+ return PTR_ERR(sb);
}
ret = check_quotactl_valid(sb, type, cmds, id);
diff --git a/fs/super.c b/fs/super.c
index 15671cd..aec99dd 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -571,8 +571,10 @@
{
int retval;
+#ifdef CONFIG_BLOCK
if (!(flags & MS_RDONLY) && bdev_read_only(sb->s_bdev))
return -EACCES;
+#endif
if (flags & MS_RDONLY)
acct_auto_close(sb);
shrink_dcache_sb(sb);
@@ -692,6 +694,7 @@
EXPORT_SYMBOL(kill_litter_super);
+#ifdef CONFIG_BLOCK
static int set_bdev_super(struct super_block *s, void *data)
{
s->s_bdev = data;
@@ -787,6 +790,7 @@
}
EXPORT_SYMBOL(kill_block_super);
+#endif
int get_sb_nodev(struct file_system_type *fs_type,
int flags, void *data,
diff --git a/fs/xfs/Kconfig b/fs/xfs/Kconfig
index 26b364c..35115bc 100644
--- a/fs/xfs/Kconfig
+++ b/fs/xfs/Kconfig
@@ -1,5 +1,6 @@
config XFS_FS
tristate "XFS filesystem support"
+ depends on BLOCK
help
XFS is a high performance journaling filesystem which originated
on the SGI IRIX platform. It is completely multi-threaded, can
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 2c01a90..3e36107 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -16,6 +16,22 @@
#include <asm/scatterlist.h>
+#ifdef CONFIG_LBD
+# include <asm/div64.h>
+# define sector_div(a, b) do_div(a, b)
+#else
+# define sector_div(n, b)( \
+{ \
+ int _res; \
+ _res = (n) % (b); \
+ (n) /= (b); \
+ _res; \
+} \
+)
+#endif
+
+#ifdef CONFIG_BLOCK
+
struct scsi_ioctl_command;
struct request_queue;
@@ -818,24 +834,30 @@
int kblockd_schedule_work(struct work_struct *work);
void kblockd_flush(void);
-#ifdef CONFIG_LBD
-# include <asm/div64.h>
-# define sector_div(a, b) do_div(a, b)
-#else
-# define sector_div(n, b)( \
-{ \
- int _res; \
- _res = (n) % (b); \
- (n) /= (b); \
- _res; \
-} \
-)
-#endif
-
#define MODULE_ALIAS_BLOCKDEV(major,minor) \
MODULE_ALIAS("block-major-" __stringify(major) "-" __stringify(minor))
#define MODULE_ALIAS_BLOCKDEV_MAJOR(major) \
MODULE_ALIAS("block-major-" __stringify(major) "-*")
+#else /* CONFIG_BLOCK */
+/*
+ * stubs for when the block layer is configured out
+ */
+#define buffer_heads_over_limit 0
+
+static inline long blk_congestion_wait(int rw, long timeout)
+{
+ return timeout;
+}
+
+static inline long nr_blockdev_pages(void)
+{
+ return 0;
+}
+
+static inline void exit_io_context(void) {}
+
+#endif /* CONFIG_BLOCK */
+
#endif
diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h
index 64b508e..131ffd3 100644
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -14,6 +14,8 @@
#include <linux/wait.h>
#include <asm/atomic.h>
+#ifdef CONFIG_BLOCK
+
enum bh_state_bits {
BH_Uptodate, /* Contains valid data */
BH_Dirty, /* Is dirty */
@@ -301,4 +303,18 @@
}
extern int __set_page_dirty_buffers(struct page *page);
+
+#else /* CONFIG_BLOCK */
+
+static inline void buffer_init(void) {}
+static inline int try_to_free_buffers(struct page *page) { return 1; }
+static inline int sync_blockdev(struct block_device *bdev) { return 0; }
+static inline int inode_has_buffers(struct inode *inode) { return 0; }
+static inline void invalidate_inode_buffers(struct inode *inode) {}
+static inline int remove_inode_buffers(struct inode *inode) { return 1; }
+static inline int sync_mapping_buffers(struct address_space *mapping) { return 0; }
+static inline void invalidate_bdev(struct block_device *bdev, int destroy_dirty_buffers) {}
+
+
+#endif /* CONFIG_BLOCK */
#endif /* _LINUX_BUFFER_HEAD_H */
diff --git a/include/linux/compat_ioctl.h b/include/linux/compat_ioctl.h
index 98d40e0..d61ef59 100644
--- a/include/linux/compat_ioctl.h
+++ b/include/linux/compat_ioctl.h
@@ -90,6 +90,7 @@
COMPATIBLE_IOCTL(FDFMTTRK)
COMPATIBLE_IOCTL(FDRAWCMD)
/* 0x12 */
+#ifdef CONFIG_BLOCK
COMPATIBLE_IOCTL(BLKRASET)
COMPATIBLE_IOCTL(BLKROSET)
COMPATIBLE_IOCTL(BLKROGET)
@@ -103,6 +104,7 @@
COMPATIBLE_IOCTL(BLKTRACETEARDOWN)
ULONG_IOCTL(BLKRASET)
ULONG_IOCTL(BLKFRASET)
+#endif
/* RAID */
COMPATIBLE_IOCTL(RAID_VERSION)
COMPATIBLE_IOCTL(GET_ARRAY_INFO)
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index 9c5a04f..b3370ef 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -3,6 +3,8 @@
#include <linux/percpu.h>
+#ifdef CONFIG_BLOCK
+
typedef int (elevator_merge_fn) (request_queue_t *, struct request **,
struct bio *);
@@ -203,4 +205,5 @@
__val; \
})
+#endif /* CONFIG_BLOCK */
#endif
diff --git a/include/linux/fs.h b/include/linux/fs.h
index b73a475..5baf3a1 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1482,6 +1482,7 @@
extern void putname(const char *name);
#endif
+#ifdef CONFIG_BLOCK
extern int register_blkdev(unsigned int, const char *);
extern int unregister_blkdev(unsigned int, const char *);
extern struct block_device *bdget(dev_t);
@@ -1490,11 +1491,15 @@
extern void bdput(struct block_device *);
extern struct block_device *open_by_devnum(dev_t, unsigned);
extern struct block_device *open_partition_by_devnum(dev_t, unsigned);
-extern const struct file_operations def_blk_fops;
extern const struct address_space_operations def_blk_aops;
+#else
+static inline void bd_forget(struct inode *inode) {}
+#endif
+extern const struct file_operations def_blk_fops;
extern const struct file_operations def_chr_fops;
extern const struct file_operations bad_sock_fops;
extern const struct file_operations def_fifo_fops;
+#ifdef CONFIG_BLOCK
extern int ioctl_by_bdev(struct block_device *, unsigned, unsigned long);
extern int blkdev_ioctl(struct inode *, struct file *, unsigned, unsigned long);
extern long compat_blkdev_ioctl(struct file *, unsigned, unsigned long);
@@ -1510,6 +1515,7 @@
#define bd_claim_by_disk(bdev, holder, disk) bd_claim(bdev, holder)
#define bd_release_from_disk(bdev, disk) bd_release(bdev)
#endif
+#endif
/* fs/char_dev.c */
#define CHRDEV_MAJOR_HASH_SIZE 255
@@ -1523,14 +1529,19 @@
extern void chrdev_show(struct seq_file *,off_t);
/* fs/block_dev.c */
-#define BLKDEV_MAJOR_HASH_SIZE 255
#define BDEVNAME_SIZE 32 /* Largest string for a blockdev identifier */
+
+#ifdef CONFIG_BLOCK
+#define BLKDEV_MAJOR_HASH_SIZE 255
extern const char *__bdevname(dev_t, char *buffer);
extern const char *bdevname(struct block_device *bdev, char *buffer);
extern struct block_device *lookup_bdev(const char *);
extern struct block_device *open_bdev_excl(const char *, int, void *);
extern void close_bdev_excl(struct block_device *);
extern void blkdev_show(struct seq_file *,off_t);
+#else
+#define BLKDEV_MAJOR_HASH_SIZE 0
+#endif
extern void init_special_inode(struct inode *, umode_t, dev_t);
@@ -1544,6 +1555,7 @@
extern int fs_may_remount_ro(struct super_block *);
+#ifdef CONFIG_BLOCK
/*
* return READ, READA, or WRITE
*/
@@ -1555,9 +1567,10 @@
#define bio_data_dir(bio) ((bio)->bi_rw & 1)
extern int check_disk_change(struct block_device *);
-extern int invalidate_inodes(struct super_block *);
extern int __invalidate_device(struct block_device *);
extern int invalidate_partition(struct gendisk *, int);
+#endif
+extern int invalidate_inodes(struct super_block *);
unsigned long invalidate_mapping_pages(struct address_space *mapping,
pgoff_t start, pgoff_t end);
unsigned long invalidate_inode_pages(struct address_space *mapping);
@@ -1590,7 +1603,9 @@
extern void emergency_remount(void);
extern int do_remount_sb(struct super_block *sb, int flags,
void *data, int force);
+#ifdef CONFIG_BLOCK
extern sector_t bmap(struct inode *, sector_t);
+#endif
extern int notify_change(struct dentry *, struct iattr *);
extern int permission(struct inode *, int, struct nameidata *);
extern int generic_permission(struct inode *, int,
@@ -1673,9 +1688,11 @@
extern struct file * get_empty_filp(void);
extern void file_move(struct file *f, struct list_head *list);
extern void file_kill(struct file *f);
+#ifdef CONFIG_BLOCK
struct bio;
extern void submit_bio(int, struct bio *);
extern int bdev_read_only(struct block_device *);
+#endif
extern int set_blocksize(struct block_device *, int);
extern int sb_set_blocksize(struct super_block *, int);
extern int sb_min_blocksize(struct super_block *, int);
@@ -1756,6 +1773,7 @@
actor);
}
+#ifdef CONFIG_BLOCK
ssize_t __blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode,
struct block_device *bdev, const struct iovec *iov, loff_t offset,
unsigned long nr_segs, get_block_t get_block, dio_iodone_t end_io,
@@ -1793,6 +1811,7 @@
return __blockdev_direct_IO(rw, iocb, inode, bdev, iov, offset,
nr_segs, get_block, end_io, DIO_OWN_LOCKING);
}
+#endif
extern const struct file_operations generic_ro_fops;
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index e4af57e..41f276f 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -11,6 +11,8 @@
#include <linux/types.h>
+#ifdef CONFIG_BLOCK
+
enum {
/* These three have identical behaviour; use the second one if DOS FDISK gets
confused about extended/logical partitions starting past cylinder 1023. */
@@ -420,3 +422,5 @@
#endif
#endif
+
+#endif
diff --git a/include/linux/mpage.h b/include/linux/mpage.h
index 517c098..cc5fb75 100644
--- a/include/linux/mpage.h
+++ b/include/linux/mpage.h
@@ -9,6 +9,7 @@
* (And no, it doesn't do the #ifdef __MPAGE_H thing, and it doesn't do
* nested includes. Get it right in the .c file).
*/
+#ifdef CONFIG_BLOCK
struct writeback_control;
typedef int (writepage_t)(struct page *page, struct writeback_control *wbc);
@@ -20,3 +21,5 @@
struct writeback_control *wbc, get_block_t get_block);
int mpage_writepage(struct page *page, get_block_t *get_block,
struct writeback_control *wbc);
+
+#endif
diff --git a/include/linux/raid/md.h b/include/linux/raid/md.h
index eb3e547..c588709 100644
--- a/include/linux/raid/md.h
+++ b/include/linux/raid/md.h
@@ -53,6 +53,8 @@
#include <linux/raid/md_u.h>
#include <linux/raid/md_k.h>
+#ifdef CONFIG_MD
+
/*
* Different major versions are not compatible.
* Different minor versions are only downward compatible.
@@ -95,5 +97,6 @@
extern void md_update_sb(mddev_t * mddev);
+#endif /* CONFIG_MD */
#endif
diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h
index d288902..920b94f 100644
--- a/include/linux/raid/md_k.h
+++ b/include/linux/raid/md_k.h
@@ -18,6 +18,8 @@
/* and dm-bio-list.h is not under include/linux because.... ??? */
#include "../../../drivers/md/dm-bio-list.h"
+#ifdef CONFIG_BLOCK
+
#define LEVEL_MULTIPATH (-4)
#define LEVEL_LINEAR (-1)
#define LEVEL_FAULTY (-5)
@@ -362,5 +364,6 @@
if (p) put_page(p);
}
+#endif /* CONFIG_BLOCK */
#endif
diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h
index bbf6621..c247a282 100644
--- a/include/scsi/scsi_tcq.h
+++ b/include/scsi/scsi_tcq.h
@@ -6,7 +6,6 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
-
#define MSG_SIMPLE_TAG 0x20
#define MSG_HEAD_TAG 0x21
#define MSG_ORDERED_TAG 0x22
@@ -14,6 +13,7 @@
#define SCSI_NO_TAG (-1) /* identify no tag in use */
+#ifdef CONFIG_BLOCK
/**
* scsi_get_tag_type - get the type of tag the device supports
@@ -144,4 +144,5 @@
return shost->bqt ? 0 : -ENOMEM;
}
+#endif /* CONFIG_BLOCK */
#endif /* _SCSI_SCSI_TCQ_H */
diff --git a/init/Kconfig b/init/Kconfig
index 4381006..d2eb7a8 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -92,7 +92,7 @@
config SWAP
bool "Support for paging of anonymous memory (swap)"
- depends on MMU
+ depends on MMU && BLOCK
default y
help
This option allows you to choose whether you want to have support
diff --git a/init/do_mounts.c b/init/do_mounts.c
index b290aad..dc1ec08 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -285,7 +285,11 @@
{
char *fs_names = __getname();
char *p;
+#ifdef CONFIG_BLOCK
char b[BDEVNAME_SIZE];
+#else
+ const char *b = name;
+#endif
get_fs_names(fs_names);
retry:
@@ -304,7 +308,9 @@
* Allow the user to distinguish between failed sys_open
* and bad superblock on root device.
*/
+#ifdef CONFIG_BLOCK
__bdevname(ROOT_DEV, b);
+#endif
printk("VFS: Cannot open root device \"%s\" or %s\n",
root_device_name, b);
printk("Please append a correct \"root=\" boot option\n");
@@ -316,7 +322,10 @@
for (p = fs_names; *p; p += strlen(p)+1)
printk(" %s", p);
printk("\n");
- panic("VFS: Unable to mount root fs on %s", __bdevname(ROOT_DEV, b));
+#ifdef CONFIG_BLOCK
+ __bdevname(ROOT_DEV, b);
+#endif
+ panic("VFS: Unable to mount root fs on %s", b);
out:
putname(fs_names);
}
@@ -387,8 +396,10 @@
change_floppy("root floppy");
}
#endif
+#ifdef CONFIG_BLOCK
create_dev("/dev/root", ROOT_DEV);
mount_block_root("/dev/root", root_mountflags);
+#endif
}
/*
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 6991bec..7a3b2e75 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -134,3 +134,8 @@
cond_syscall(sys_mremap);
cond_syscall(sys_remap_file_pages);
cond_syscall(compat_sys_move_pages);
+
+/* block-layer dependent */
+cond_syscall(sys_bdflush);
+cond_syscall(sys_ioprio_set);
+cond_syscall(sys_ioprio_get);
diff --git a/mm/Makefile b/mm/Makefile
index 4f2166a..12b3a4e 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -12,7 +12,7 @@
readahead.o swap.o truncate.o vmscan.o \
prio_tree.o util.o mmzone.o vmstat.o $(mmu-y)
-ifeq ($(CONFIG_MMU),y)
+ifeq ($(CONFIG_MMU)$(CONFIG_BLOCK),yy)
obj-y += bounce.o
endif
obj-$(CONFIG_SWAP) += page_io.o swap_state.o swapfile.o thrash.o
diff --git a/mm/filemap.c b/mm/filemap.c
index d6846de..c4fe97f 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2020,6 +2020,7 @@
if (unlikely(*pos + *count > inode->i_sb->s_maxbytes))
*count = inode->i_sb->s_maxbytes - *pos;
} else {
+#ifdef CONFIG_BLOCK
loff_t isize;
if (bdev_read_only(I_BDEV(inode)))
return -EPERM;
@@ -2031,6 +2032,9 @@
if (*pos + *count > isize)
*count = isize - *pos;
+#else
+ return -EPERM;
+#endif
}
return 0;
}
diff --git a/mm/migrate.c b/mm/migrate.c
index 7f50e3f..ba2453f 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -409,6 +409,7 @@
}
EXPORT_SYMBOL(migrate_page);
+#ifdef CONFIG_BLOCK
/*
* Migration function for pages with buffers. This function can only be used
* if the underlying filesystem guarantees that no other references to "page"
@@ -466,6 +467,7 @@
return 0;
}
EXPORT_SYMBOL(buffer_migrate_page);
+#endif
/*
* Writeback a page to clean the dirty state
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index ecf2783..c0d4ce1 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -807,9 +807,11 @@
if (likely(mapping)) {
int (*spd)(struct page *) = mapping->a_ops->set_page_dirty;
- if (spd)
- return (*spd)(page);
- return __set_page_dirty_buffers(page);
+#ifdef CONFIG_BLOCK
+ if (!spd)
+ spd = __set_page_dirty_buffers;
+#endif
+ return (*spd)(page);
}
if (!PageDirty(page)) {
if (!TestSetPageDirty(page))
diff --git a/mm/truncate.c b/mm/truncate.c
index cd3e34b..8fde658 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -35,8 +35,10 @@
{
void (*invalidatepage)(struct page *, unsigned long);
invalidatepage = page->mapping->a_ops->invalidatepage;
+#ifdef CONFIG_BLOCK
if (!invalidatepage)
invalidatepage = block_invalidatepage;
+#endif
if (invalidatepage)
(*invalidatepage)(page, offset);
}