libata: rename SFF functions
SFF functions have confusing names. Some have sff prefix, some have
bmdma, some std, some pci and some none. Unify the naming by...
* SFF functions which are common to both BMDMA and non-BMDMA are
prefixed with ata_sff_.
* SFF functions which are specific to BMDMA are prefixed with
ata_bmdma_.
* SFF functions which are specific to PCI but apply to both BMDMA and
non-BMDMA are prefixed with ata_pci_sff_.
* SFF functions which are specific to PCI and BMDMA are prefixed with
ata_pci_bmdma_.
* Drop generic prefixes from LLD specific routines. For example,
bfin_std_dev_select -> bfin_dev_select.
The following renames are noteworthy.
ata_qc_issue_prot() -> ata_sff_qc_issue()
ata_pci_default_filter() -> ata_bmdma_mode_filter()
ata_dev_try_classify() -> ata_sff_dev_classify()
This rename is in preparation of separating SFF support out of libata
core layer. This patch strictly renames functions and doesn't
introduce any behavior difference.
Signed-off-by: Tejun Heo <htejun@gmail.com>
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 3efa990..771509c 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1303,9 +1303,9 @@
ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
/* wait a while before checking status */
- ata_wait_after_reset(ap, deadline);
+ ata_sff_wait_after_reset(ap, deadline);
- rc = ata_wait_ready(ap, deadline);
+ rc = ata_sff_wait_ready(ap, deadline);
/* link occupied, -ENODEV too is an error */
if (rc) {
reason = "device not ready";
@@ -1350,7 +1350,7 @@
tf.command = 0x80;
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
- rc = sata_std_hardreset(link, class, deadline);
+ rc = sata_sff_hardreset(link, class, deadline);
ahci_start_engine(ap);
@@ -1431,7 +1431,7 @@
* have to be reset again. For most cases, this should
* suffice while making probing snappish enough.
*/
- rc = ata_wait_ready(ap, jiffies + 2 * HZ);
+ rc = ata_sff_wait_ready(ap, jiffies + 2 * HZ);
if (rc)
ahci_kick_engine(ap, 0);
@@ -1444,7 +1444,7 @@
void __iomem *port_mmio = ahci_port_base(ap);
u32 new_tmp, tmp;
- ata_std_postreset(link, class);
+ ata_sff_postreset(link, class);
/* Make sure port's ATAPI bit is set appropriately */
new_tmp = tmp = readl(port_mmio + PORT_CMD);
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index b23e2a10..47aeccd 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -150,9 +150,9 @@
return -ENODEV;
if (dev->vendor == PCI_VENDOR_ID_AL)
- ata_pci_clear_simplex(dev);
+ ata_pci_bmdma_clear_simplex(dev);
- return ata_pci_init_one(dev, ppi, &generic_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL);
}
static struct pci_device_id ata_generic[] = {
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index e113f2f..7ab76a4 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -629,7 +629,7 @@
if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -1493,7 +1493,7 @@
hpriv->map = piix_init_sata_map(pdev, port_info,
piix_map_db_table[ent->driver_data]);
- rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
host->private_data = hpriv;
@@ -1527,7 +1527,7 @@
}
pci_set_master(pdev);
- return ata_pci_activate_sff_host(host, ata_interrupt, &piix_sht);
+ return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht);
}
static int __init piix_init(void)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index fa205d7..cbdbfb5 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -75,9 +75,9 @@
const struct ata_port_operations ata_base_port_ops = {
.irq_clear = ata_noop_irq_clear,
- .prereset = ata_std_prereset,
- .hardreset = sata_std_hardreset,
- .postreset = ata_std_postreset,
+ .prereset = ata_sff_prereset,
+ .hardreset = sata_sff_hardreset,
+ .postreset = ata_sff_postreset,
.error_handler = ata_std_error_handler,
};
@@ -3425,7 +3425,7 @@
}
/**
- * ata_std_prereset - prepare for reset
+ * ata_sff_prereset - prepare for reset
* @link: ATA link to be reset
* @deadline: deadline jiffies for the operation
*
@@ -3441,7 +3441,7 @@
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int ata_std_prereset(struct ata_link *link, unsigned long deadline)
+int ata_sff_prereset(struct ata_link *link, unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
@@ -3463,7 +3463,7 @@
/* wait for !BSY if we don't know that no device is attached */
if (!ata_link_offline(link)) {
- rc = ata_wait_ready(ap, deadline);
+ rc = ata_sff_wait_ready(ap, deadline);
if (rc && rc != -ENODEV) {
ata_link_printk(link, KERN_WARNING, "device not ready "
"(errno=%d), forcing hardreset\n", rc);
@@ -3535,7 +3535,7 @@
}
/**
- * ata_std_postreset - standard postreset callback
+ * ata_sff_postreset - standard postreset callback
* @link: the target ata_link
* @classes: classes of attached devices
*
@@ -3546,7 +3546,7 @@
* LOCKING:
* Kernel thread context (may sleep)
*/
-void ata_std_postreset(struct ata_link *link, unsigned int *classes)
+void ata_sff_postreset(struct ata_link *link, unsigned int *classes)
{
struct ata_port *ap = link->ap;
u32 serror;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index cc8548e..f4f9c27 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2861,7 +2861,7 @@
* ata_base_port_ops. Ignore it if SCR access is not
* available.
*/
- if (hardreset == sata_std_hardreset && !sata_scr_valid(&ap->link))
+ if (hardreset == sata_sff_hardreset && !sata_scr_valid(&ap->link))
hardreset = NULL;
ata_do_eh(ap, ops->prereset, ops->softreset, hardreset, ops->postreset);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 5208ca2..8544321 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -42,22 +42,22 @@
const struct ata_port_operations ata_sff_port_ops = {
.inherits = &ata_base_port_ops,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
+ .qc_prep = ata_sff_qc_prep,
+ .qc_issue = ata_sff_qc_issue,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .softreset = ata_std_softreset,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .freeze = ata_sff_freeze,
+ .thaw = ata_sff_thaw,
+ .softreset = ata_sff_softreset,
+ .error_handler = ata_sff_error_handler,
+ .post_internal_cmd = ata_sff_post_internal_cmd,
- .dev_select = ata_std_dev_select,
- .check_status = ata_check_status,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .exec_command = ata_exec_command,
- .data_xfer = ata_data_xfer,
- .irq_on = ata_irq_on,
+ .dev_select = ata_sff_dev_select,
+ .check_status = ata_sff_check_status,
+ .tf_load = ata_sff_tf_load,
+ .tf_read = ata_sff_tf_read,
+ .exec_command = ata_sff_exec_command,
+ .data_xfer = ata_sff_data_xfer,
+ .irq_on = ata_sff_irq_on,
.port_start = ata_sff_port_start,
};
@@ -65,13 +65,13 @@
const struct ata_port_operations ata_bmdma_port_ops = {
.inherits = &ata_sff_port_ops,
- .mode_filter = ata_pci_default_filter,
+ .mode_filter = ata_bmdma_mode_filter,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
- .irq_clear = ata_bmdma_irq_clear,
+ .irq_clear = ata_sff_irq_clear,
};
/**
@@ -181,7 +181,7 @@
}
/**
- * ata_qc_prep - Prepare taskfile for submission
+ * ata_sff_qc_prep - Prepare taskfile for submission
* @qc: Metadata associated with taskfile to be prepared
*
* Prepare ATA taskfile for submission.
@@ -189,7 +189,7 @@
* LOCKING:
* spin_lock_irqsave(host lock)
*/
-void ata_qc_prep(struct ata_queued_cmd *qc)
+void ata_sff_qc_prep(struct ata_queued_cmd *qc)
{
if (!(qc->flags & ATA_QCFLAG_DMAMAP))
return;
@@ -198,7 +198,7 @@
}
/**
- * ata_dumb_qc_prep - Prepare taskfile for submission
+ * ata_sff_dumb_qc_prep - Prepare taskfile for submission
* @qc: Metadata associated with taskfile to be prepared
*
* Prepare ATA taskfile for submission.
@@ -206,7 +206,7 @@
* LOCKING:
* spin_lock_irqsave(host lock)
*/
-void ata_dumb_qc_prep(struct ata_queued_cmd *qc)
+void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc)
{
if (!(qc->flags & ATA_QCFLAG_DMAMAP))
return;
@@ -215,7 +215,7 @@
}
/**
- * ata_check_status - Read device status reg & clear interrupt
+ * ata_sff_check_status - Read device status reg & clear interrupt
* @ap: port where the device is
*
* Reads ATA taskfile status register for currently-selected device
@@ -225,13 +225,13 @@
* LOCKING:
* Inherited from caller.
*/
-u8 ata_check_status(struct ata_port *ap)
+u8 ata_sff_check_status(struct ata_port *ap)
{
return ioread8(ap->ioaddr.status_addr);
}
/**
- * ata_altstatus - Read device alternate status reg
+ * ata_sff_altstatus - Read device alternate status reg
* @ap: port where the device is
*
* Reads ATA taskfile alternate status register for
@@ -243,7 +243,7 @@
* LOCKING:
* Inherited from caller.
*/
-u8 ata_altstatus(struct ata_port *ap)
+u8 ata_sff_altstatus(struct ata_port *ap)
{
if (ap->ops->check_altstatus)
return ap->ops->check_altstatus(ap);
@@ -252,7 +252,7 @@
}
/**
- * ata_busy_sleep - sleep until BSY clears, or timeout
+ * ata_sff_busy_sleep - sleep until BSY clears, or timeout
* @ap: port containing status register to be polled
* @tmout_pat: impatience timeout
* @tmout: overall timeout
@@ -266,19 +266,19 @@
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int ata_busy_sleep(struct ata_port *ap,
- unsigned long tmout_pat, unsigned long tmout)
+int ata_sff_busy_sleep(struct ata_port *ap,
+ unsigned long tmout_pat, unsigned long tmout)
{
unsigned long timer_start, timeout;
u8 status;
- status = ata_busy_wait(ap, ATA_BUSY, 300);
+ status = ata_sff_busy_wait(ap, ATA_BUSY, 300);
timer_start = jiffies;
timeout = timer_start + tmout_pat;
while (status != 0xff && (status & ATA_BUSY) &&
time_before(jiffies, timeout)) {
msleep(50);
- status = ata_busy_wait(ap, ATA_BUSY, 3);
+ status = ata_sff_busy_wait(ap, ATA_BUSY, 3);
}
if (status != 0xff && (status & ATA_BUSY))
@@ -307,7 +307,7 @@
}
/**
- * ata_wait_ready - sleep until BSY clears, or timeout
+ * ata_sff_wait_ready - sleep until BSY clears, or timeout
* @ap: port containing status register to be polled
* @deadline: deadline jiffies for the operation
*
@@ -320,7 +320,7 @@
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int ata_wait_ready(struct ata_port *ap, unsigned long deadline)
+int ata_sff_wait_ready(struct ata_port *ap, unsigned long deadline)
{
unsigned long start = jiffies;
int warned = 0;
@@ -349,7 +349,7 @@
}
/**
- * ata_std_dev_select - Select device 0/1 on ATA bus
+ * ata_sff_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
* @device: ATA device (numbered from zero) to select
*
@@ -362,7 +362,7 @@
* LOCKING:
* caller.
*/
-void ata_std_dev_select(struct ata_port *ap, unsigned int device)
+void ata_sff_dev_select(struct ata_port *ap, unsigned int device)
{
u8 tmp;
@@ -372,7 +372,7 @@
tmp = ATA_DEVICE_OBS | ATA_DEV1;
iowrite8(tmp, ap->ioaddr.device_addr);
- ata_pause(ap); /* needed; also flushes, for mmio */
+ ata_sff_pause(ap); /* needed; also flushes, for mmio */
}
/**
@@ -386,9 +386,9 @@
* make either device 0, or device 1, active on the
* ATA channel.
*
- * This is a high-level version of ata_std_dev_select(),
- * which additionally provides the services of inserting
- * the proper pauses and status polling, where needed.
+ * This is a high-level version of ata_sff_dev_select(), which
+ * additionally provides the services of inserting the proper
+ * pauses and status polling, where needed.
*
* LOCKING:
* caller.
@@ -413,7 +413,7 @@
}
/**
- * ata_irq_on - Enable interrupts on a port.
+ * ata_sff_irq_on - Enable interrupts on a port.
* @ap: Port on which interrupts are enabled.
*
* Enable interrupts on a legacy IDE device using MMIO or PIO,
@@ -422,7 +422,7 @@
* LOCKING:
* Inherited from caller.
*/
-u8 ata_irq_on(struct ata_port *ap)
+u8 ata_sff_irq_on(struct ata_port *ap)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
u8 tmp;
@@ -440,7 +440,7 @@
}
/**
- * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * ata_sff_irq_clear - Clear PCI IDE BMDMA interrupt.
* @ap: Port associated with this ATA transaction.
*
* Clear interrupt and error flags in DMA status register.
@@ -450,7 +450,7 @@
* LOCKING:
* spin_lock_irqsave(host lock)
*/
-void ata_bmdma_irq_clear(struct ata_port *ap)
+void ata_sff_irq_clear(struct ata_port *ap)
{
void __iomem *mmio = ap->ioaddr.bmdma_addr;
@@ -461,7 +461,7 @@
}
/**
- * ata_tf_load - send taskfile registers to host controller
+ * ata_sff_tf_load - send taskfile registers to host controller
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
@@ -470,7 +470,7 @@
* LOCKING:
* Inherited from caller.
*/
-void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -520,7 +520,7 @@
}
/**
- * ata_tf_read - input device's ATA taskfile shadow registers
+ * ata_sff_tf_read - input device's ATA taskfile shadow registers
* @ap: Port from which input is read
* @tf: ATA taskfile register set for storing input
*
@@ -532,11 +532,11 @@
* LOCKING:
* Inherited from caller.
*/
-void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_sff_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- tf->command = ata_check_status(ap);
+ tf->command = ata_sff_check_status(ap);
tf->feature = ioread8(ioaddr->error_addr);
tf->nsect = ioread8(ioaddr->nsect_addr);
tf->lbal = ioread8(ioaddr->lbal_addr);
@@ -560,7 +560,7 @@
}
/**
- * ata_exec_command - issue ATA command to host controller
+ * ata_sff_exec_command - issue ATA command to host controller
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
*
@@ -570,12 +570,12 @@
* LOCKING:
* spin_lock_irqsave(host lock)
*/
-void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
+void ata_sff_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
{
DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
iowrite8(tf->command, ap->ioaddr.command_addr);
- ata_pause(ap);
+ ata_sff_pause(ap);
}
/**
@@ -598,7 +598,7 @@
}
/**
- * ata_data_xfer - Transfer data by PIO
+ * ata_sff_data_xfer - Transfer data by PIO
* @dev: device to target
* @buf: data buffer
* @buflen: buffer length
@@ -612,8 +612,8 @@
* RETURNS:
* Bytes consumed.
*/
-unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf,
- unsigned int buflen, int rw)
+unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf,
+ unsigned int buflen, int rw)
{
struct ata_port *ap = dev->link->ap;
void __iomem *data_addr = ap->ioaddr.data_addr;
@@ -644,7 +644,7 @@
}
/**
- * ata_data_xfer_noirq - Transfer data by PIO
+ * ata_sff_data_xfer_noirq - Transfer data by PIO
* @dev: device to target
* @buf: data buffer
* @buflen: buffer length
@@ -659,14 +659,14 @@
* RETURNS:
* Bytes consumed.
*/
-unsigned int ata_data_xfer_noirq(struct ata_device *dev, unsigned char *buf,
- unsigned int buflen, int rw)
+unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev, unsigned char *buf,
+ unsigned int buflen, int rw)
{
unsigned long flags;
unsigned int consumed;
local_irq_save(flags);
- consumed = ata_data_xfer(dev, buf, buflen, rw);
+ consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
local_irq_restore(flags);
return consumed;
@@ -752,7 +752,7 @@
} else
ata_pio_sector(qc);
- ata_altstatus(qc->ap); /* flush */
+ ata_sff_altstatus(qc->ap); /* flush */
}
/**
@@ -773,7 +773,7 @@
WARN_ON(qc->dev->cdb_len < 12);
ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
- ata_altstatus(ap); /* flush */
+ ata_sff_altstatus(ap); /* flush */
switch (qc->tf.protocol) {
case ATAPI_PROT_PIO:
@@ -915,7 +915,7 @@
if (unlikely(__atapi_pio_bytes(qc, bytes)))
goto err_out;
- ata_altstatus(ap); /* flush */
+ ata_sff_altstatus(ap); /* flush */
return;
@@ -1004,7 +1004,7 @@
}
/**
- * ata_hsm_move - move the HSM to the next state.
+ * ata_sff_hsm_move - move the HSM to the next state.
* @ap: the target ata_port
* @qc: qc on going
* @status: current device status
@@ -1013,15 +1013,15 @@
* RETURNS:
* 1 when poll next status needed, 0 otherwise.
*/
-int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
- u8 status, int in_wq)
+int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
+ u8 status, int in_wq)
{
unsigned long flags = 0;
int poll_next;
WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0);
- /* Make sure ata_qc_issue_prot() does not throw things
+ /* Make sure ata_sff_qc_issue() does not throw things
* like DMA polling into the workqueue. Notice that
* in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING).
*/
@@ -1263,10 +1263,10 @@
* or something. Snooze for a couple msecs, then
* chk-status again. If still busy, queue delayed work.
*/
- status = ata_busy_wait(ap, ATA_BUSY, 5);
+ status = ata_sff_busy_wait(ap, ATA_BUSY, 5);
if (status & ATA_BUSY) {
msleep(2);
- status = ata_busy_wait(ap, ATA_BUSY, 10);
+ status = ata_sff_busy_wait(ap, ATA_BUSY, 10);
if (status & ATA_BUSY) {
ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE);
return;
@@ -1274,7 +1274,7 @@
}
/* move the HSM */
- poll_next = ata_hsm_move(ap, qc, status, 1);
+ poll_next = ata_sff_hsm_move(ap, qc, status, 1);
/* another command or interrupt handler
* may be running at this point.
@@ -1284,7 +1284,7 @@
}
/**
- * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
+ * ata_sff_qc_issue - issue taskfile to device in proto-dependent manner
* @qc: command to issue to device
*
* Using various libata functions and hooks, this function
@@ -1300,7 +1300,7 @@
* RETURNS:
* Zero on success, AC_ERR_* mask on failure
*/
-unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
+unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
@@ -1415,7 +1415,7 @@
}
/**
- * ata_host_intr - Handle host interrupt for given (port, task)
+ * ata_sff_host_intr - Handle host interrupt for given (port, task)
* @ap: Port on which interrupt arrived (possibly...)
* @qc: Taskfile currently active in engine
*
@@ -1429,8 +1429,8 @@
* RETURNS:
* One if interrupt was handled, zero if not (shared irq).
*/
-inline unsigned int ata_host_intr(struct ata_port *ap,
- struct ata_queued_cmd *qc)
+inline unsigned int ata_sff_host_intr(struct ata_port *ap,
+ struct ata_queued_cmd *qc)
{
struct ata_eh_info *ehi = &ap->link.eh_info;
u8 status, host_stat = 0;
@@ -1481,7 +1481,7 @@
}
/* check altstatus */
- status = ata_altstatus(ap);
+ status = ata_sff_altstatus(ap);
if (status & ATA_BUSY)
goto idle_irq;
@@ -1493,7 +1493,7 @@
/* ack bmdma irq events */
ap->ops->irq_clear(ap);
- ata_hsm_move(ap, qc, status, 0);
+ ata_sff_hsm_move(ap, qc, status, 0);
if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
qc->tf.protocol == ATAPI_PROT_DMA))
@@ -1516,12 +1516,12 @@
}
/**
- * ata_interrupt - Default ATA host interrupt handler
+ * ata_sff_interrupt - Default ATA host interrupt handler
* @irq: irq line (unused)
* @dev_instance: pointer to our ata_host information structure
*
* Default interrupt handler for PCI IDE devices. Calls
- * ata_host_intr() for each port that is not disabled.
+ * ata_sff_host_intr() for each port that is not disabled.
*
* LOCKING:
* Obtains host lock during operation.
@@ -1529,7 +1529,7 @@
* RETURNS:
* IRQ_NONE or IRQ_HANDLED.
*/
-irqreturn_t ata_interrupt(int irq, void *dev_instance)
+irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
unsigned int i;
@@ -1550,7 +1550,7 @@
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
(qc->flags & ATA_QCFLAG_ACTIVE))
- handled |= ata_host_intr(ap, qc);
+ handled |= ata_sff_host_intr(ap, qc);
}
}
@@ -1560,7 +1560,7 @@
}
/**
- * ata_bmdma_freeze - Freeze BMDMA controller port
+ * ata_sff_freeze - Freeze SFF controller port
* @ap: port to freeze
*
* Freeze BMDMA controller port.
@@ -1568,7 +1568,7 @@
* LOCKING:
* Inherited from caller.
*/
-void ata_bmdma_freeze(struct ata_port *ap)
+void ata_sff_freeze(struct ata_port *ap)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
@@ -1588,15 +1588,15 @@
}
/**
- * ata_bmdma_thaw - Thaw BMDMA controller port
+ * ata_sff_thaw - Thaw SFF controller port
* @ap: port to thaw
*
- * Thaw BMDMA controller port.
+ * Thaw SFF controller port.
*
* LOCKING:
* Inherited from caller.
*/
-void ata_bmdma_thaw(struct ata_port *ap)
+void ata_sff_thaw(struct ata_port *ap)
{
/* clear & re-enable interrupts */
ap->ops->check_status(ap);
@@ -1647,7 +1647,7 @@
}
/**
- * ata_dev_try_classify - Parse returned ATA device signature
+ * ata_sff_dev_classify - Parse returned ATA device signature
* @dev: ATA device to classify (starting at zero)
* @present: device seems present
* @r_err: Value of error register on completion
@@ -1667,7 +1667,7 @@
* RETURNS:
* Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
*/
-unsigned int ata_dev_try_classify(struct ata_device *dev, int present,
+unsigned int ata_sff_dev_classify(struct ata_device *dev, int present,
u8 *r_err)
{
struct ata_port *ap = dev->link->ap;
@@ -1727,7 +1727,7 @@
* BSY bit to clear
*/
if (dev0) {
- rc = ata_wait_ready(ap, deadline);
+ rc = ata_sff_wait_ready(ap, deadline);
if (rc) {
if (rc != -ENODEV)
return rc;
@@ -1757,7 +1757,7 @@
msleep(50); /* give drive a breather */
}
- rc = ata_wait_ready(ap, deadline);
+ rc = ata_sff_wait_ready(ap, deadline);
if (rc) {
if (rc != -ENODEV)
return rc;
@@ -1776,7 +1776,7 @@
}
/**
- * ata_wait_after_reset - wait before checking status after reset
+ * ata_sff_wait_after_reset - wait before checking status after reset
* @ap: port containing status register to be polled
* @deadline: deadline jiffies for the operation
*
@@ -1790,7 +1790,7 @@
* LOCKING:
* Kernel thread context (may sleep).
*/
-void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline)
+void ata_sff_wait_after_reset(struct ata_port *ap, unsigned long deadline)
{
unsigned long until = jiffies + ATA_TMOUT_FF_WAIT;
@@ -1845,7 +1845,7 @@
iowrite8(ap->ctl, ioaddr->ctl_addr);
/* wait a while before checking status */
- ata_wait_after_reset(ap, deadline);
+ ata_sff_wait_after_reset(ap, deadline);
/* Before we perform post reset processing we want to see if
* the bus shows 0xFF because the odd clown forgets the D7
@@ -1858,7 +1858,7 @@
}
/**
- * ata_std_softreset - reset host port via ATA SRST
+ * ata_sff_softreset - reset host port via ATA SRST
* @link: ATA link to reset
* @classes: resulting classes of attached devices
* @deadline: deadline jiffies for the operation
@@ -1871,7 +1871,7 @@
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int ata_std_softreset(struct ata_link *link, unsigned int *classes,
+int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
@@ -1906,10 +1906,10 @@
}
/* determine by signature whether we have ATA or ATAPI devices */
- classes[0] = ata_dev_try_classify(&link->device[0],
+ classes[0] = ata_sff_dev_classify(&link->device[0],
devmask & (1 << 0), &err);
if (slave_possible && err != 0x81)
- classes[1] = ata_dev_try_classify(&link->device[1],
+ classes[1] = ata_sff_dev_classify(&link->device[1],
devmask & (1 << 1), &err);
out:
@@ -1918,7 +1918,7 @@
}
/**
- * sata_std_hardreset - reset host port via SATA phy reset
+ * sata_sff_hardreset - reset host port via SATA phy reset
* @link: link to reset
* @class: resulting class of attached device
* @deadline: deadline jiffies for the operation
@@ -1932,7 +1932,7 @@
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int sata_std_hardreset(struct ata_link *link, unsigned int *class,
+int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
@@ -1957,7 +1957,7 @@
}
/* wait a while before checking status */
- ata_wait_after_reset(ap, deadline);
+ ata_sff_wait_after_reset(ap, deadline);
/* If PMP is supported, we have to do follow-up SRST. Note
* that some PMPs don't send D2H Reg FIS after hardreset at
@@ -1965,11 +1965,11 @@
* second and request follow-up SRST.
*/
if (ap->flags & ATA_FLAG_PMP) {
- ata_wait_ready(ap, jiffies + HZ);
+ ata_sff_wait_ready(ap, jiffies + HZ);
return -EAGAIN;
}
- rc = ata_wait_ready(ap, deadline);
+ rc = ata_sff_wait_ready(ap, deadline);
/* link occupied, -ENODEV too is an error */
if (rc) {
ata_link_printk(link, KERN_ERR,
@@ -1979,17 +1979,17 @@
ap->ops->dev_select(ap, 0); /* probably unnecessary */
- *class = ata_dev_try_classify(link->device, 1, NULL);
+ *class = ata_sff_dev_classify(link->device, 1, NULL);
DPRINTK("EXIT, class=%u\n", *class);
return 0;
}
/**
- * ata_bmdma_error_handler - Stock error handler for BMDMA controller
+ * ata_sff_error_handler - Stock error handler for BMDMA controller
* @ap: port to handle error for
*
- * Stock error handler for BMDMA controller. It can handle both
+ * Stock error handler for SFF controller. It can handle both
* PATA and SATA controllers. Many controllers should be able to
* use this EH as-is or with some added handling before and
* after.
@@ -1997,7 +1997,7 @@
* LOCKING:
* Kernel thread context (may sleep)
*/
-void ata_bmdma_error_handler(struct ata_port *ap)
+void ata_sff_error_handler(struct ata_port *ap)
{
ata_reset_fn_t softreset = ap->ops->softreset;
ata_reset_fn_t hardreset = ap->ops->hardreset;
@@ -2034,7 +2034,7 @@
ap->ops->bmdma_stop(qc);
}
- ata_altstatus(ap);
+ ata_sff_altstatus(ap);
ap->ops->check_status(ap);
ap->ops->irq_clear(ap);
@@ -2045,14 +2045,14 @@
/* PIO and DMA engines have been stopped, perform recovery */
- /* ata_std_softreset and sata_std_hardreset are inherited to
+ /* ata_sff_softreset and sata_sff_hardreset are inherited to
* all SFF drivers from ata_sff_port_ops. Ignore softreset if
* ctl isn't accessible. Ignore hardreset if SCR access isn't
* available.
*/
- if (softreset == ata_std_softreset && !ap->ioaddr.ctl_addr)
+ if (softreset == ata_sff_softreset && !ap->ioaddr.ctl_addr)
softreset = NULL;
- if (hardreset == sata_std_hardreset && !sata_scr_valid(&ap->link))
+ if (hardreset == sata_sff_hardreset && !sata_scr_valid(&ap->link))
hardreset = NULL;
ata_do_eh(ap, ap->ops->prereset, softreset, hardreset,
@@ -2060,14 +2060,13 @@
}
/**
- * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for
- * BMDMA controller
+ * ata_sff_post_internal_cmd - Stock post_internal_cmd for SFF controller
* @qc: internal command to clean up
*
* LOCKING:
* Kernel thread context (may sleep)
*/
-void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
+void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc)
{
if (qc->ap->ioaddr.bmdma_addr)
ata_bmdma_stop(qc);
@@ -2094,7 +2093,7 @@
}
/**
- * ata_std_ports - initialize ioaddr with standard port offsets.
+ * ata_sff_std_ports - initialize ioaddr with standard port offsets.
* @ioaddr: IO address structure to be initialized
*
* Utility function which initializes data_addr, error_addr,
@@ -2104,7 +2103,7 @@
*
* Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
*/
-void ata_std_ports(struct ata_ioports *ioaddr)
+void ata_sff_std_ports(struct ata_ioports *ioaddr)
{
ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR;
@@ -2118,7 +2117,8 @@
ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
}
-unsigned long ata_pci_default_filter(struct ata_device *adev, unsigned long xfer_mask)
+unsigned long ata_bmdma_mode_filter(struct ata_device *adev,
+ unsigned long xfer_mask)
{
/* Filter out DMA modes if the device has been configured by
the BIOS as PIO only */
@@ -2209,7 +2209,7 @@
mmio + ATA_DMA_CMD);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_altstatus(ap); /* dummy read */
+ ata_sff_altstatus(ap); /* dummy read */
}
/**
@@ -2289,9 +2289,9 @@
/*
* determine by signature whether we have ATA or ATAPI devices
*/
- device[0].class = ata_dev_try_classify(&device[0], dev0, &err);
+ device[0].class = ata_sff_dev_classify(&device[0], dev0, &err);
if ((slave_possible) && (err != 0x81))
- device[1].class = ata_dev_try_classify(&device[1], dev1, &err);
+ device[1].class = ata_sff_dev_classify(&device[1], dev1, &err);
/* is double-select really necessary? */
if (device[1].class != ATA_DEV_NONE)
@@ -2322,7 +2322,7 @@
#ifdef CONFIG_PCI
/**
- * ata_pci_clear_simplex - attempt to kick device out of simplex
+ * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex
* @pdev: PCI device
*
* Some PCI ATA devices report simplex mode but in fact can be told to
@@ -2330,7 +2330,7 @@
* perform the task on such devices. Calling it on other devices will
* have -undefined- behaviour.
*/
-int ata_pci_clear_simplex(struct pci_dev *pdev)
+int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
{
unsigned long bmdma = pci_resource_start(pdev, 4);
u8 simplex;
@@ -2347,7 +2347,7 @@
}
/**
- * ata_pci_init_bmdma - acquire PCI BMDMA resources and init ATA host
+ * ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host
* @host: target ATA host
*
* Acquire PCI BMDMA resources and initialize @host accordingly.
@@ -2358,7 +2358,7 @@
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int ata_pci_init_bmdma(struct ata_host *host)
+int ata_pci_bmdma_init(struct ata_host *host)
{
struct device *gdev = host->dev;
struct pci_dev *pdev = to_pci_dev(gdev);
@@ -2418,7 +2418,7 @@
}
/**
- * ata_pci_init_sff_host - acquire native PCI ATA resources and init host
+ * ata_pci_sff_init_host - acquire native PCI ATA resources and init host
* @host: target ATA host
*
* Acquire native PCI ATA resources for @host and initialize the
@@ -2436,7 +2436,7 @@
* 0 if at least one port is initialized, -ENODEV if no port is
* available.
*/
-int ata_pci_init_sff_host(struct ata_host *host)
+int ata_pci_sff_init_host(struct ata_host *host)
{
struct device *gdev = host->dev;
struct pci_dev *pdev = to_pci_dev(gdev);
@@ -2478,7 +2478,7 @@
ap->ioaddr.altstatus_addr =
ap->ioaddr.ctl_addr = (void __iomem *)
((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS);
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
(unsigned long long)pci_resource_start(pdev, base),
@@ -2496,7 +2496,7 @@
}
/**
- * ata_pci_prepare_sff_host - helper to prepare native PCI ATA host
+ * ata_pci_sff_prepare_host - helper to prepare native PCI ATA host
* @pdev: target PCI device
* @ppi: array of port_info, must be enough for two ports
* @r_host: out argument for the initialized ATA host
@@ -2510,7 +2510,7 @@
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int ata_pci_prepare_sff_host(struct pci_dev *pdev,
+int ata_pci_sff_prepare_host(struct pci_dev *pdev,
const struct ata_port_info * const * ppi,
struct ata_host **r_host)
{
@@ -2528,12 +2528,12 @@
goto err_out;
}
- rc = ata_pci_init_sff_host(host);
+ rc = ata_pci_sff_init_host(host);
if (rc)
goto err_out;
/* init DMA related stuff */
- rc = ata_pci_init_bmdma(host);
+ rc = ata_pci_bmdma_init(host);
if (rc)
goto err_bmdma;
@@ -2554,7 +2554,7 @@
}
/**
- * ata_pci_activate_sff_host - start SFF host, request IRQ and register it
+ * ata_pci_sff_activate_host - start SFF host, request IRQ and register it
* @host: target SFF ATA host
* @irq_handler: irq_handler used when requesting IRQ(s)
* @sht: scsi_host_template to use when registering the host
@@ -2569,7 +2569,7 @@
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int ata_pci_activate_sff_host(struct ata_host *host,
+int ata_pci_sff_activate_host(struct ata_host *host,
irq_handler_t irq_handler,
struct scsi_host_template *sht)
{
@@ -2647,7 +2647,7 @@
}
/**
- * ata_pci_init_one - Initialize/register PCI IDE host controller
+ * ata_pci_sff_init_one - Initialize/register PCI IDE host controller
* @pdev: Controller to be initialized
* @ppi: array of port_info, must be enough for two ports
* @sht: scsi_host_template to use when registering the host
@@ -2671,9 +2671,9 @@
* RETURNS:
* Zero on success, negative on errno-based value on error.
*/
-int ata_pci_init_one(struct pci_dev *pdev,
- const struct ata_port_info * const * ppi,
- struct scsi_host_template *sht, void *host_priv)
+int ata_pci_sff_init_one(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct scsi_host_template *sht, void *host_priv)
{
struct device *dev = &pdev->dev;
const struct ata_port_info *pi = NULL;
@@ -2704,13 +2704,13 @@
goto out;
/* prepare and activate SFF host */
- rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
goto out;
host->private_data = host_priv;
pci_set_master(pdev);
- rc = ata_pci_activate_sff_host(host, ata_interrupt, sht);
+ rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
out:
if (rc == 0)
devres_remove_group(&pdev->dev, NULL);
@@ -2724,47 +2724,47 @@
EXPORT_SYMBOL_GPL(ata_sff_port_ops);
EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
-EXPORT_SYMBOL_GPL(ata_qc_prep);
-EXPORT_SYMBOL_GPL(ata_dumb_qc_prep);
-EXPORT_SYMBOL_GPL(ata_std_dev_select);
-EXPORT_SYMBOL_GPL(ata_check_status);
-EXPORT_SYMBOL_GPL(ata_altstatus);
-EXPORT_SYMBOL_GPL(ata_busy_sleep);
-EXPORT_SYMBOL_GPL(ata_wait_ready);
-EXPORT_SYMBOL_GPL(ata_tf_load);
-EXPORT_SYMBOL_GPL(ata_tf_read);
-EXPORT_SYMBOL_GPL(ata_exec_command);
-EXPORT_SYMBOL_GPL(ata_data_xfer);
-EXPORT_SYMBOL_GPL(ata_data_xfer_noirq);
-EXPORT_SYMBOL_GPL(ata_irq_on);
-EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
-EXPORT_SYMBOL_GPL(ata_hsm_move);
-EXPORT_SYMBOL_GPL(ata_qc_issue_prot);
-EXPORT_SYMBOL_GPL(ata_host_intr);
-EXPORT_SYMBOL_GPL(ata_interrupt);
-EXPORT_SYMBOL_GPL(ata_bmdma_freeze);
-EXPORT_SYMBOL_GPL(ata_bmdma_thaw);
-EXPORT_SYMBOL_GPL(ata_std_prereset);
-EXPORT_SYMBOL_GPL(ata_dev_try_classify);
-EXPORT_SYMBOL_GPL(ata_wait_after_reset);
-EXPORT_SYMBOL_GPL(ata_std_softreset);
-EXPORT_SYMBOL_GPL(sata_std_hardreset);
-EXPORT_SYMBOL_GPL(ata_std_postreset);
-EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
-EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
+EXPORT_SYMBOL_GPL(ata_sff_qc_prep);
+EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
+EXPORT_SYMBOL_GPL(ata_sff_dev_select);
+EXPORT_SYMBOL_GPL(ata_sff_check_status);
+EXPORT_SYMBOL_GPL(ata_sff_altstatus);
+EXPORT_SYMBOL_GPL(ata_sff_busy_sleep);
+EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
+EXPORT_SYMBOL_GPL(ata_sff_tf_load);
+EXPORT_SYMBOL_GPL(ata_sff_tf_read);
+EXPORT_SYMBOL_GPL(ata_sff_exec_command);
+EXPORT_SYMBOL_GPL(ata_sff_data_xfer);
+EXPORT_SYMBOL_GPL(ata_sff_data_xfer_noirq);
+EXPORT_SYMBOL_GPL(ata_sff_irq_on);
+EXPORT_SYMBOL_GPL(ata_sff_irq_clear);
+EXPORT_SYMBOL_GPL(ata_sff_hsm_move);
+EXPORT_SYMBOL_GPL(ata_sff_qc_issue);
+EXPORT_SYMBOL_GPL(ata_sff_host_intr);
+EXPORT_SYMBOL_GPL(ata_sff_interrupt);
+EXPORT_SYMBOL_GPL(ata_sff_freeze);
+EXPORT_SYMBOL_GPL(ata_sff_thaw);
+EXPORT_SYMBOL_GPL(ata_sff_prereset);
+EXPORT_SYMBOL_GPL(ata_sff_dev_classify);
+EXPORT_SYMBOL_GPL(ata_sff_wait_after_reset);
+EXPORT_SYMBOL_GPL(ata_sff_softreset);
+EXPORT_SYMBOL_GPL(sata_sff_hardreset);
+EXPORT_SYMBOL_GPL(ata_sff_postreset);
+EXPORT_SYMBOL_GPL(ata_sff_error_handler);
+EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd);
EXPORT_SYMBOL_GPL(ata_sff_port_start);
-EXPORT_SYMBOL_GPL(ata_std_ports);
-EXPORT_SYMBOL_GPL(ata_pci_default_filter);
+EXPORT_SYMBOL_GPL(ata_sff_std_ports);
+EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter);
EXPORT_SYMBOL_GPL(ata_bmdma_setup);
EXPORT_SYMBOL_GPL(ata_bmdma_start);
EXPORT_SYMBOL_GPL(ata_bmdma_stop);
EXPORT_SYMBOL_GPL(ata_bmdma_status);
EXPORT_SYMBOL_GPL(ata_bus_reset);
#ifdef CONFIG_PCI
-EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
-EXPORT_SYMBOL_GPL(ata_pci_init_bmdma);
-EXPORT_SYMBOL_GPL(ata_pci_init_sff_host);
-EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host);
-EXPORT_SYMBOL_GPL(ata_pci_activate_sff_host);
-EXPORT_SYMBOL_GPL(ata_pci_init_one);
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
+EXPORT_SYMBOL_GPL(ata_pci_sff_init_host);
+EXPORT_SYMBOL_GPL(ata_pci_sff_prepare_host);
+EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
+EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
#endif /* CONFIG_PCI */
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index d337f32..c5f91e6 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -47,7 +47,7 @@
if (ap->acpi_handle == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
return -ENODEV;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -106,7 +106,7 @@
static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask)
{
struct pata_acpi *acpi = adev->link->ap->private_data;
- return ata_pci_default_filter(adev, mask & acpi->mask[adev->devno]);
+ return ata_bmdma_mode_filter(adev, mask & acpi->mask[adev->devno]);
}
/**
@@ -162,7 +162,7 @@
}
/**
- * pacpi_qc_issue_prot - command issue
+ * pacpi_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -170,14 +170,14 @@
* neccessary.
*/
-static unsigned int pacpi_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
struct pata_acpi *acpi = ap->private_data;
if (acpi->gtm.flags & 0x10)
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
if (adev != acpi->last) {
pacpi_set_piomode(ap, adev);
@@ -185,7 +185,7 @@
pacpi_set_dmamode(ap, adev);
acpi->last = adev;
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
/**
@@ -223,7 +223,7 @@
static struct ata_port_operations pacpi_ops = {
.inherits = &ata_bmdma_port_ops,
- .qc_issue = pacpi_qc_issue_prot,
+ .qc_issue = pacpi_qc_issue,
.cable_detect = pacpi_cable_detect,
.mode_filter = pacpi_mode_filter,
.set_piomode = pacpi_set_piomode,
@@ -259,7 +259,7 @@
.port_ops = &pacpi_ops,
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_init_one(pdev, ppi, &pacpi_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL);
}
static const struct pci_device_id pacpi_pci_tbl[] = {
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 43c558f..fcabe46 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -121,7 +121,7 @@
ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
if (strstr(model_num, "WDC"))
return mask &= ~ATA_MASK_UDMA;
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -449,7 +449,7 @@
}
pci_dev_put(isa_bridge);
pci_dev_put(north);
- ata_pci_clear_simplex(pdev);
+ ata_pci_bmdma_clear_simplex(pdev);
}
/**
* ali_init_one - discovery callback
@@ -552,7 +552,7 @@
ppi[0] = &info_20_udma;
pci_dev_put(isa_bridge);
}
- return ata_pci_init_one(pdev, ppi, &ali_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 33074c3..26665c3 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -143,7 +143,7 @@
if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
static int amd_cable_detect(struct ata_port *ap)
@@ -293,7 +293,7 @@
if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -503,7 +503,7 @@
ppi[0] = &info[type];
if (type < 3)
- ata_pci_clear_simplex(pdev);
+ ata_pci_bmdma_clear_simplex(pdev);
/* Check for AMD7411 */
if (type == 3)
@@ -523,7 +523,7 @@
}
/* And fire it up */
- return ata_pci_init_one(pdev, ppi, &amd_sht, hpriv);
+ return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv);
}
#ifdef CONFIG_PM
@@ -546,7 +546,7 @@
pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
- ata_pci_clear_simplex(pdev);
+ ata_pci_bmdma_clear_simplex(pdev);
}
ata_host_resume(host);
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index b6d8c4d..0f513bc 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -52,7 +52,7 @@
if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -78,7 +78,7 @@
if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -400,7 +400,7 @@
BUG_ON(ppi[0] == NULL);
- return ata_pci_init_one(pdev, ppi, &artop_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL);
}
static const struct pci_device_id artop_pci_tbl[] = {
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index 5283155..3e8651d 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -223,7 +223,7 @@
host->private_data = info;
/* Register ATA device and return */
- return ata_host_activate(host, info->irq, ata_interrupt,
+ return ata_host_activate(host, info->irq, ata_sff_interrupt,
IRQF_SHARED | IRQF_TRIGGER_RISING,
&at32_sht);
}
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 56a65ba..78738fb 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -45,7 +45,7 @@
if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
static int atiixp_cable_detect(struct ata_port *ap)
@@ -223,7 +223,7 @@
static struct ata_port_operations atiixp_port_ops = {
.inherits = &ata_bmdma_port_ops,
- .qc_prep = ata_dumb_qc_prep,
+ .qc_prep = ata_sff_dumb_qc_prep,
.bmdma_start = atiixp_bmdma_start,
.bmdma_stop = atiixp_bmdma_stop,
@@ -243,7 +243,7 @@
.port_ops = &atiixp_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_init_one(dev, ppi, &atiixp_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &atiixp_sht, NULL);
}
static const struct pci_device_id atiixp[] = {
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 457ac80..c854e88 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -674,7 +674,7 @@
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
- * Note: Original code is ata_tf_load().
+ * Note: Original code is ata_sff_tf_load().
*/
static void bfin_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
@@ -745,7 +745,7 @@
* @ap: Port from which input is read
* @tf: ATA taskfile register set for storing input
*
- * Note: Original code is ata_tf_read().
+ * Note: Original code is ata_sff_tf_read().
*/
static void bfin_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
@@ -775,7 +775,7 @@
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
*
- * Note: Original code is ata_exec_command().
+ * Note: Original code is ata_sff_exec_command().
*/
static void bfin_exec_command(struct ata_port *ap,
@@ -785,7 +785,7 @@
dev_dbg(ap->dev, "ata%u: cmd 0x%X\n", ap->print_id, tf->command);
write_atapi_register(base, ATA_REG_CMD, tf->command);
- ata_pause(ap);
+ ata_sff_pause(ap);
}
/**
@@ -800,14 +800,14 @@
}
/**
- * bfin_std_dev_select - Select device 0/1 on ATA bus
+ * bfin_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
* @device: ATA device (numbered from zero) to select
*
- * Note: Original code is ata_std_dev_select().
+ * Note: Original code is ata_sff_dev_select().
*/
-static void bfin_std_dev_select(struct ata_port *ap, unsigned int device)
+static void bfin_dev_select(struct ata_port *ap, unsigned int device)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
u8 tmp;
@@ -818,7 +818,7 @@
tmp = ATA_DEVICE_OBS | ATA_DEV1;
write_atapi_register(base, ATA_REG_DEVICE, tmp);
- ata_pause(ap);
+ ata_sff_pause(ap);
}
/**
@@ -977,7 +977,7 @@
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
u8 nsect, lbal;
- bfin_std_dev_select(ap, device);
+ bfin_dev_select(ap, device);
write_atapi_register(base, ATA_REG_NSECT, 0x55);
write_atapi_register(base, ATA_REG_LBAL, 0xaa);
@@ -1014,7 +1014,7 @@
* BSY bit to clear
*/
if (dev0)
- ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+ ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
/* if device 1 was found in ata_devchk, wait for
* register access, then wait for BSY to clear
@@ -1023,7 +1023,7 @@
while (dev1) {
u8 nsect, lbal;
- bfin_std_dev_select(ap, 1);
+ bfin_dev_select(ap, 1);
nsect = read_atapi_register(base, ATA_REG_NSECT);
lbal = read_atapi_register(base, ATA_REG_LBAL);
if ((nsect == 1) && (lbal == 1))
@@ -1035,14 +1035,14 @@
msleep(50); /* give drive a breather */
}
if (dev1)
- ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+ ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
/* is all this really necessary? */
- bfin_std_dev_select(ap, 0);
+ bfin_dev_select(ap, 0);
if (dev1)
- bfin_std_dev_select(ap, 1);
+ bfin_dev_select(ap, 1);
if (dev0)
- bfin_std_dev_select(ap, 0);
+ bfin_dev_select(ap, 0);
}
/**
@@ -1088,15 +1088,15 @@
}
/**
- * bfin_std_softreset - reset host port via ATA SRST
+ * bfin_softreset - reset host port via ATA SRST
* @ap: port to reset
* @classes: resulting classes of attached devices
*
- * Note: Original code is ata_std_softreset().
+ * Note: Original code is ata_sff_softreset().
*/
-static int bfin_std_softreset(struct ata_link *link, unsigned int *classes,
- unsigned long deadline)
+static int bfin_softreset(struct ata_link *link, unsigned int *classes,
+ unsigned long deadline)
{
struct ata_port *ap = link->ap;
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
@@ -1115,7 +1115,7 @@
devmask |= (1 << 1);
/* select device 0 again */
- bfin_std_dev_select(ap, 0);
+ bfin_dev_select(ap, 0);
/* issue bus reset */
err_mask = bfin_bus_softreset(ap, devmask);
@@ -1126,10 +1126,10 @@
}
/* determine by signature whether we have ATA or ATAPI devices */
- classes[0] = ata_dev_try_classify(&ap->link.device[0],
+ classes[0] = ata_sff_dev_classify(&ap->link.device[0],
devmask & (1 << 0), &err);
if (slave_possible && err != 0x81)
- classes[1] = ata_dev_try_classify(&ap->link.device[1],
+ classes[1] = ata_sff_dev_classify(&ap->link.device[1],
devmask & (1 << 1), &err);
out:
@@ -1167,7 +1167,7 @@
* @buflen: buffer length
* @write_data: read/write
*
- * Note: Original code is ata_data_xfer().
+ * Note: Original code is ata_sff_data_xfer().
*/
static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf,
@@ -1206,7 +1206,7 @@
* bfin_irq_clear - Clear ATAPI interrupt.
* @ap: Port associated with this ATA transaction.
*
- * Note: Original code is ata_bmdma_irq_clear().
+ * Note: Original code is ata_sff_irq_clear().
*/
static void bfin_irq_clear(struct ata_port *ap)
@@ -1223,7 +1223,7 @@
* bfin_irq_on - Enable interrupts on a port.
* @ap: Port on which interrupts are enabled.
*
- * Note: Original code is ata_irq_on().
+ * Note: Original code is ata_sff_irq_on().
*/
static unsigned char bfin_irq_on(struct ata_port *ap)
@@ -1244,13 +1244,13 @@
}
/**
- * bfin_bmdma_freeze - Freeze DMA controller port
+ * bfin_freeze - Freeze DMA controller port
* @ap: port to freeze
*
- * Note: Original code is ata_bmdma_freeze().
+ * Note: Original code is ata_sff_freeze().
*/
-static void bfin_bmdma_freeze(struct ata_port *ap)
+static void bfin_freeze(struct ata_port *ap)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
@@ -1270,13 +1270,13 @@
}
/**
- * bfin_bmdma_thaw - Thaw DMA controller port
+ * bfin_thaw - Thaw DMA controller port
* @ap: port to thaw
*
- * Note: Original code is ata_bmdma_thaw().
+ * Note: Original code is ata_sff_thaw().
*/
-void bfin_bmdma_thaw(struct ata_port *ap)
+void bfin_thaw(struct ata_port *ap)
{
bfin_check_status(ap);
bfin_irq_clear(ap);
@@ -1284,14 +1284,14 @@
}
/**
- * bfin_std_postreset - standard postreset callback
+ * bfin_postreset - standard postreset callback
* @ap: the target ata_port
* @classes: classes of attached devices
*
- * Note: Original code is ata_std_postreset().
+ * Note: Original code is ata_sff_postreset().
*/
-static void bfin_std_postreset(struct ata_link *link, unsigned int *classes)
+static void bfin_postreset(struct ata_link *link, unsigned int *classes)
{
struct ata_port *ap = link->ap;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
@@ -1301,9 +1301,9 @@
/* is double-select really necessary? */
if (classes[0] != ATA_DEV_NONE)
- bfin_std_dev_select(ap, 1);
+ bfin_dev_select(ap, 1);
if (classes[1] != ATA_DEV_NONE)
- bfin_std_dev_select(ap, 0);
+ bfin_dev_select(ap, 0);
/* bail out if no device is present */
if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
@@ -1362,7 +1362,7 @@
.exec_command = bfin_exec_command,
.check_status = bfin_check_status,
.check_altstatus = bfin_check_altstatus,
- .dev_select = bfin_std_dev_select,
+ .dev_select = bfin_dev_select,
.bmdma_setup = bfin_bmdma_setup,
.bmdma_start = bfin_bmdma_start,
@@ -1372,10 +1372,10 @@
.qc_prep = ata_noop_qc_prep,
- .freeze = bfin_bmdma_freeze,
- .thaw = bfin_bmdma_thaw,
- .softreset = bfin_std_softreset,
- .postreset = bfin_std_postreset,
+ .freeze = bfin_freeze,
+ .thaw = bfin_thaw,
+ .softreset = bfin_softreset,
+ .postreset = bfin_postreset,
.post_internal_cmd = bfin_bmdma_stop,
.irq_clear = bfin_irq_clear,
@@ -1513,7 +1513,7 @@
}
if (ata_host_activate(host, platform_get_irq(pdev, 0),
- ata_interrupt, IRQF_SHARED, &bfin_sht) != 0) {
+ ata_sff_interrupt, IRQF_SHARED, &bfin_sht) != 0) {
peripheral_free_list(atapi_io_port);
dev_err(&pdev->dev, "Fail to attach ATAPI device\n");
return -ENODEV;
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 27219b0..a907cf4 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -107,8 +107,8 @@
pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
} else {
/* Save the shared timings for channel, they will be loaded
- by qc_issue_prot. Reloading the setup time is expensive
- so we keep a merged one loaded */
+ by qc_issue. Reloading the setup time is expensive so we
+ keep a merged one loaded */
pci_read_config_byte(pdev, ARTIM23, ®);
reg &= 0x3F;
reg |= t.setup;
@@ -119,14 +119,14 @@
/**
- * cmd640_qc_issue_prot - command preparation hook
+ * cmd640_qc_issue - command preparation hook
* @qc: Command to be issued
*
* Channel 1 has shared timings. We must reprogram the
* clock each drive 2/3 switch we do.
*/
-static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int cmd640_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -137,7 +137,7 @@
pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]);
timing->last = adev->devno;
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
/**
@@ -172,8 +172,8 @@
static struct ata_port_operations cmd640_port_ops = {
.inherits = &ata_bmdma_port_ops,
/* In theory xfer_noirq is not needed once we kill the prefetcher */
- .data_xfer = ata_data_xfer_noirq,
- .qc_issue = cmd640_qc_issue_prot,
+ .data_xfer = ata_sff_data_xfer_noirq,
+ .qc_issue = cmd640_qc_issue,
.cable_detect = ata_cable_40wire,
.set_piomode = cmd640_set_piomode,
.port_start = cmd640_port_start,
@@ -224,7 +224,7 @@
cmd640_hardware_init(pdev);
- return ata_pci_init_one(pdev, ppi, &cmd640_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index f0e5666..ddd09b7 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -349,7 +349,7 @@
class_rev &= 0xFF;
if (id->driver_data == 0) /* 643 */
- ata_pci_clear_simplex(pdev);
+ ata_pci_bmdma_clear_simplex(pdev);
if (pdev->device == PCI_DEVICE_ID_CMD_646) {
/* Does UDMA work ? */
@@ -373,7 +373,7 @@
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
#endif
- return ata_pci_init_one(pdev, ppi, &cmd64x_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 46d0ce3..1186bcd 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -146,7 +146,7 @@
static struct ata_port_operations cs5520_port_ops = {
.inherits = &ata_bmdma_port_ops,
- .qc_prep = ata_dumb_qc_prep,
+ .qc_prep = ata_sff_dumb_qc_prep,
.cable_detect = ata_cable_40wire,
.set_piomode = cs5520_set_piomode,
.set_dmamode = cs5520_set_dmamode,
@@ -227,7 +227,7 @@
ioaddr->ctl_addr = iomap[1];
ioaddr->altstatus_addr = iomap[1];
ioaddr->bmdma_addr = iomap[4];
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ata_port_desc(host->ports[0],
"cmd 0x%x ctl 0x%x", cmd_port[0], ctl_port[0]);
@@ -238,7 +238,7 @@
ioaddr->ctl_addr = iomap[3];
ioaddr->altstatus_addr = iomap[3];
ioaddr->bmdma_addr = iomap[4] + 8;
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ata_port_desc(host->ports[1],
"cmd 0x%x ctl 0x%x", cmd_port[1], ctl_port[1]);
@@ -258,7 +258,7 @@
continue;
rc = devm_request_irq(&pdev->dev, irq[ap->port_no],
- ata_interrupt, 0, DRV_NAME, host);
+ ata_sff_interrupt, 0, DRV_NAME, host);
if (rc)
return rc;
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index ac3ad55..744beeb 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -133,7 +133,7 @@
}
/**
- * cs5530_qc_issue_prot - command issue
+ * cs5530_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -142,7 +142,7 @@
* one MWDMA/UDMA bit.
*/
-static unsigned int cs5530_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -157,7 +157,7 @@
cs5530_set_dmamode(ap, adev);
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct scsi_host_template cs5530_sht = {
@@ -168,8 +168,8 @@
static struct ata_port_operations cs5530_port_ops = {
.inherits = &ata_bmdma_port_ops,
- .qc_prep = ata_dumb_qc_prep,
- .qc_issue = cs5530_qc_issue_prot,
+ .qc_prep = ata_sff_dumb_qc_prep,
+ .qc_issue = cs5530_qc_issue,
.cable_detect = ata_cable_40wire,
.set_piomode = cs5530_set_piomode,
@@ -325,7 +325,7 @@
ppi[1] = &info_palmax_secondary;
/* Now kick off ATA set up */
- return ata_pci_init_one(pdev, ppi, &cs5530_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 5c0762e..f1b6556 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -199,7 +199,7 @@
rdmsr(ATAC_CH0D1_PIO, timings, dummy);
if (CS5535_BAD_PIO(timings))
wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
- return ata_pci_init_one(dev, ppi, &cs5535_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL);
}
static const struct pci_device_id cs5535[] = {
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 2d34b91..73f8332 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -261,7 +261,7 @@
return -ENODEV;
}
- return ata_pci_init_one(dev, ppi, &cs5536_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL);
}
static const struct pci_device_id cs5536[] = {
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index ae14969..a9c3218 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -136,7 +136,7 @@
if (PCI_FUNC(pdev->devfn) != 1)
return -ENODEV;
- return ata_pci_init_one(pdev, ppi, &cy82c693_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL);
}
static const struct pci_device_id cy82c693[] = {
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 1d839a5..9fba829 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -45,7 +45,7 @@
if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -262,7 +262,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, ppi, &efar_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL);
}
static const struct pci_device_id efar_pci_tbl[] = {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index c2d4923..f2b83ea 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -184,7 +184,7 @@
if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
mask &= ~(0xF0 << ATA_SHIFT_UDMA);
}
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -393,7 +393,7 @@
break;
}
/* Now kick off ATA set up */
- return ata_pci_init_one(dev, ppi, &hpt36x_sht, hpriv);
+ return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index c10fcd3..4216399 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -283,7 +283,7 @@
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -299,7 +299,7 @@
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -338,7 +338,7 @@
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
static int hpt374_fn1_pre_reset(struct ata_link *link, unsigned long deadline)
@@ -374,7 +374,7 @@
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -1019,7 +1019,7 @@
}
/* Now kick off ATA set up */
- return ata_pci_init_one(dev, ppi, &hpt37x_sht, private_data);
+ return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data);
}
static const struct pci_device_id hpt37x[] = {
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index cd44ee3..d5c9fd7 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -156,7 +156,7 @@
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -308,7 +308,7 @@
return 0;
}
-static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int hpt3x2n_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_taskfile *tf = &qc->tf;
struct ata_port *ap = qc->ap;
@@ -323,7 +323,7 @@
hpt3x2n_set_clock(ap, 0x23);
}
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct scsi_host_template hpt3x2n_sht = {
@@ -338,7 +338,7 @@
.inherits = &ata_bmdma_port_ops,
.bmdma_stop = hpt3x2n_bmdma_stop,
- .qc_issue = hpt3x2n_qc_issue_prot,
+ .qc_issue = hpt3x2n_qc_issue,
.cable_detect = hpt3x2n_cable_detect,
.set_piomode = hpt3x2n_set_piomode,
@@ -554,7 +554,7 @@
}
/* Now kick off ATA set up */
- return ata_pci_init_one(dev, ppi, &hpt3x2n_sht, hpriv);
+ return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv);
}
static const struct pci_device_id hpt3x2n[] = {
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 8857d02..f11a320 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -202,15 +202,15 @@
ioaddr->altstatus_addr =
ioaddr->ctl_addr = base + offset_ctl[i];
ioaddr->scr_addr = NULL;
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ioaddr->bmdma_addr = base + 8 * i;
ata_port_pbar_desc(ap, 4, -1, "ioport");
ata_port_pbar_desc(ap, 4, offset_cmd[i], "cmd");
}
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &hpt3x3_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &hpt3x3_sht);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index 13d43e9..52de9f9 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -270,7 +270,7 @@
disable_dma(state->dma);
/* see ata_bmdma_stop */
- ata_altstatus(ap);
+ ata_sff_altstatus(ap);
}
static u8 pata_icside_bmdma_status(struct ata_port *ap)
@@ -316,7 +316,7 @@
struct pata_icside_state *state = ap->host->private_data;
if (classes[0] != ATA_DEV_NONE || classes[1] != ATA_DEV_NONE)
- return ata_std_postreset(link, classes);
+ return ata_sff_postreset(link, classes);
state->port[ap->port_no].disabled = 1;
@@ -336,7 +336,7 @@
.inherits = &ata_sff_port_ops,
/* no need to build any PRD tables for DMA */
.qc_prep = ata_noop_qc_prep,
- .data_xfer = ata_data_xfer_noirq,
+ .data_xfer = ata_sff_data_xfer_noirq,
.bmdma_setup = pata_icside_bmdma_setup,
.bmdma_start = pata_icside_bmdma_start,
.bmdma_stop = pata_icside_bmdma_stop,
@@ -481,7 +481,7 @@
pata_icside_setup_ioaddr(ap, info->base, info, info->port[i]);
}
- return ata_host_activate(host, ec->irq, ata_interrupt, 0,
+ return ata_host_activate(host, ec->irq, ata_sff_interrupt, 0,
&pata_icside_sht);
}
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 085913e..6a111ba 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -50,7 +50,7 @@
if (pnp_irq_valid(idev, 0)) {
irq = pnp_irq(idev, 0);
- handler = ata_interrupt;
+ handler = ata_sff_interrupt;
}
/* allocate host */
@@ -78,7 +78,7 @@
ap->ioaddr.ctl_addr = ctl_addr;
}
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
(unsigned long long)pnp_port_start(idev, 0),
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 84ab89e..c113d7c 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -40,7 +40,7 @@
if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -274,7 +274,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, ppi, &it8213_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL);
}
static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 6a8a4dd..88e37cf 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -395,11 +395,11 @@
it821x_program(ap, adev, itdev->pio[adev->devno]);
itdev->last_device = device;
}
- ata_std_dev_select(ap, device);
+ ata_sff_dev_select(ap, device);
}
/**
- * it821x_smart_qc_issue_prot - wrap qc issue prot
+ * it821x_smart_qc_issue - wrap qc issue prot
* @qc: command
*
* Wrap the command issue sequence for the IT821x. We need to
@@ -407,7 +407,7 @@
* usual happenings kick off
*/
-static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc)
{
switch(qc->tf.command)
{
@@ -427,14 +427,14 @@
case ATA_CMD_ID_ATA:
/* Arguably should just no-op this one */
case ATA_CMD_SET_FEATURES:
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command);
return AC_ERR_DEV;
}
/**
- * it821x_passthru_qc_issue_prot - wrap qc issue prot
+ * it821x_passthru_qc_issue - wrap qc issue prot
* @qc: command
*
* Wrap the command issue sequence for the IT821x. We need to
@@ -442,10 +442,10 @@
* usual happenings kick off
*/
-static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int it821x_passthru_qc_issue(struct ata_queued_cmd *qc)
{
it821x_passthru_dev_select(qc->ap, qc->dev->devno);
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
/**
@@ -639,7 +639,7 @@
.inherits = &ata_bmdma_port_ops,
.check_atapi_dma= it821x_check_atapi_dma,
- .qc_issue = it821x_smart_qc_issue_prot,
+ .qc_issue = it821x_smart_qc_issue,
.cable_detect = it821x_ident_hack,
.set_mode = it821x_smart_set_mode,
@@ -655,7 +655,7 @@
.dev_select = it821x_passthru_dev_select,
.bmdma_start = it821x_passthru_bmdma_start,
.bmdma_stop = it821x_passthru_bmdma_stop,
- .qc_issue = it821x_passthru_qc_issue_prot,
+ .qc_issue = it821x_passthru_qc_issue,
.cable_detect = ata_cable_unknown,
.set_piomode = it821x_passthru_set_piomode,
@@ -722,7 +722,7 @@
else
ppi[0] = &info_smart;
- return ata_pci_init_one(pdev, ppi, &it821x_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index d02629a..283a8fb 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -110,7 +110,7 @@
ioaddr->altstatus_addr = data->cs1 + 0x06;
ioaddr->ctl_addr = data->cs1 + 0x06;
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
#ifndef __ARMEB__
@@ -186,7 +186,7 @@
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
/* activate host */
- return ata_host_activate(host, irq, ata_interrupt, 0, &ixp4xx_sht);
+ return ata_host_activate(host, irq, ata_sff_interrupt, 0, &ixp4xx_sht);
}
static __devexit int ixp4xx_pata_remove(struct platform_device *dev)
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 317f347..73b7596 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -102,7 +102,7 @@
ap->cbl = ATA_CBL_SATA;
break;
}
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/* No PIO or DMA methods needed for this device */
@@ -144,7 +144,7 @@
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_init_one(pdev, ppi, &jmicron_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL);
}
static const struct pci_device_id jmicron_pci_tbl[] = {
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 2474068..f13f10a 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -226,12 +226,12 @@
static struct ata_port_operations simple_port_ops = {
.inherits = &legacy_base_port_ops,
- .data_xfer = ata_data_xfer_noirq,
+ .data_xfer = ata_sff_data_xfer_noirq,
};
static struct ata_port_operations legacy_port_ops = {
.inherits = &legacy_base_port_ops,
- .data_xfer = ata_data_xfer_noirq,
+ .data_xfer = ata_sff_data_xfer_noirq,
.set_mode = legacy_set_mode,
};
@@ -317,7 +317,7 @@
}
local_irq_restore(flags);
} else
- buflen = ata_data_xfer_noirq(dev, buf, buflen, rw);
+ buflen = ata_sff_data_xfer_noirq(dev, buf, buflen, rw);
return buflen;
}
@@ -579,7 +579,7 @@
}
/**
- * opt82c465mv_qc_issue_prot - command issue
+ * opt82c465mv_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -593,7 +593,7 @@
* FIXME: dual channel needs ->serialize support
*/
-static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int opti82c46x_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -604,13 +604,13 @@
&& ap->host->private_data != NULL)
opti82c46x_set_piomode(ap, adev);
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct ata_port_operations opti82c46x_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = opti82c46x_set_piomode,
- .qc_issue = opti82c46x_qc_issue_prot,
+ .qc_issue = opti82c46x_qc_issue,
};
static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -644,7 +644,7 @@
* @irq: interrupt line
*
* In dual channel mode the 6580 has one clock per channel and we have
- * to software clockswitch in qc_issue_prot.
+ * to software clockswitch in qc_issue.
*/
static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -710,14 +710,14 @@
}
/**
- * qdi_qc_issue_prot - command issue
+ * qdi_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings.
*/
-static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -730,7 +730,7 @@
2 * ap->port_no);
}
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
@@ -759,7 +759,7 @@
}
return (buflen + 3) & ~3;
} else
- return ata_data_xfer(adev, buf, buflen, rw);
+ return ata_sff_data_xfer(adev, buf, buflen, rw);
}
static int qdi_port(struct platform_device *dev,
@@ -774,7 +774,7 @@
static struct ata_port_operations qdi6500_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = qdi6500_set_piomode,
- .qc_issue = qdi_qc_issue_prot,
+ .qc_issue = qdi_qc_issue,
.data_xfer = vlb32_data_xfer,
};
@@ -1016,13 +1016,13 @@
ap->ioaddr.cmd_addr = io_addr;
ap->ioaddr.altstatus_addr = ctrl_addr;
ap->ioaddr.ctl_addr = ctrl_addr;
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
ap->host->private_data = ld;
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206);
- ret = ata_host_activate(host, probe->irq, ata_interrupt, 0,
- &legacy_sht);
+ ret = ata_host_activate(host, probe->irq, ata_sff_interrupt, 0,
+ &legacy_sht);
if (ret)
goto fail;
ld->platform_dev = pdev;
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index d38e64c..24a011b 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -55,7 +55,7 @@
(!(devices & 0x10))) /* PATA enable ? */
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
static int marvell_cable_detect(struct ata_port *ap)
@@ -128,7 +128,7 @@
if (pdev->device == 0x6101)
ppi[1] = &ata_dummy_port_info;
- return ata_pci_init_one(pdev, ppi, &marvell_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
}
static const struct pci_device_id marvell_pci_tbl[] = {
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index fec9319..5d1d32a 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -252,7 +252,7 @@
if (device != priv->csel)
mpc52xx_ata_apply_timings(priv, device);
- ata_std_dev_select(ap,device);
+ ata_sff_dev_select(ap,device);
}
static struct scsi_host_template mpc52xx_ata_sht = {
@@ -305,7 +305,7 @@
ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs);
/* activate host */
- return ata_host_activate(host, priv->ata_irq, ata_interrupt, 0,
+ return ata_host_activate(host, priv->ata_irq, ata_sff_interrupt, 0,
&mpc52xx_ata_sht);
}
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 1b9d0d4..7d7e3fd 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -55,7 +55,7 @@
if (!pci_test_config_bits(pdev, &mpiix_enable_bits))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -69,8 +69,8 @@
*
* This would get very ugly because we can only program timing for one
* device at a time, the other gets PIO0. Fortunately libata calls
- * our qc_issue_prot command before a command is issued so we can
- * flip the timings back and forth to reduce the pain.
+ * our qc_issue command before a command is issued so we can flip the
+ * timings back and forth to reduce the pain.
*/
static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -110,7 +110,7 @@
}
/**
- * mpiix_qc_issue_prot - command issue
+ * mpiix_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -120,7 +120,7 @@
* be made PIO0.
*/
-static unsigned int mpiix_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int mpiix_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -133,7 +133,7 @@
if (adev->pio_mode && adev != ap->private_data)
mpiix_set_piomode(ap, adev);
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct scsi_host_template mpiix_sht = {
@@ -142,7 +142,7 @@
static struct ata_port_operations mpiix_port_ops = {
.inherits = &ata_sff_port_ops,
- .qc_issue = mpiix_qc_issue_prot,
+ .qc_issue = mpiix_qc_issue,
.cable_detect = ata_cable_40wire,
.set_piomode = mpiix_set_piomode,
.prereset = mpiix_pre_reset,
@@ -207,10 +207,10 @@
ap->ioaddr.altstatus_addr = ctl_addr;
/* Let libata fill in the port details */
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
/* activate host */
- return ata_host_activate(host, irq, ata_interrupt, IRQF_SHARED,
+ return ata_host_activate(host, irq, ata_sff_interrupt, IRQF_SHARED,
&mpiix_sht);
}
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 3491828..d9719c8 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -68,10 +68,10 @@
return rc;
/* Any chip specific setup/optimisation/messages here */
- ata_pci_clear_simplex(pdev);
+ ata_pci_bmdma_clear_simplex(pdev);
/* And let the library code do the work */
- return ata_pci_init_one(pdev, port_info, &netcell_sht, NULL);
+ return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL);
}
static const struct pci_device_id netcell_pci_tbl[] = {
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 8213d08..c9c0ea6 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -73,7 +73,7 @@
struct ata_device *adev = &ap->link.device[device];
if (ap->private_data != adev) {
iowrite8(0xd6, ap->ioaddr.bmdma_addr + 0x1f);
- ata_std_dev_select(ap, device);
+ ata_sff_dev_select(ap, device);
ninja32_set_piomode(ap, adev);
}
}
@@ -132,7 +132,7 @@
ap->ioaddr.ctl_addr = base + 0x1E;
ap->ioaddr.altstatus_addr = base + 0x1E;
ap->ioaddr.bmdma_addr = base;
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
iowrite8(0x05, base + 0x01); /* Enable interrupt lines */
iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */
@@ -142,7 +142,7 @@
iowrite8(0xa4, base + 0x1c); /* Unknown */
iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */
/* FIXME: Should we disable them at remove ? */
- return ata_host_activate(host, dev->irq, ata_interrupt,
+ return ata_host_activate(host, dev->irq, ata_sff_interrupt,
IRQF_SHARED, &ninja32_sht);
}
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 4d2eefe..76d2455 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -50,7 +50,7 @@
if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -105,7 +105,7 @@
}
/**
- * ns87410_qc_issue_prot - command issue
+ * ns87410_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -113,7 +113,7 @@
* necessary.
*/
-static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int ns87410_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -126,7 +126,7 @@
if (adev->pio_mode && adev != ap->private_data)
ns87410_set_piomode(ap, adev);
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct scsi_host_template ns87410_sht = {
@@ -135,7 +135,7 @@
static struct ata_port_operations ns87410_port_ops = {
.inherits = &ata_sff_port_ops,
- .qc_issue = ns87410_qc_issue_prot,
+ .qc_issue = ns87410_qc_issue,
.cable_detect = ata_cable_40wire,
.set_piomode = ns87410_set_piomode,
.prereset = ns87410_pre_reset,
@@ -149,7 +149,7 @@
.port_ops = &ns87410_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_init_one(dev, ppi, &ns87410_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL);
}
static const struct pci_device_id ns87410[] = {
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index cdd79d6..03a52ce 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -172,14 +172,14 @@
}
/**
- * ns87415_bmdma_irq_clear - Clear interrupt
+ * ns87415_irq_clear - Clear interrupt
* @ap: Channel to clear
*
* Erratum: Due to a chip bug regisers 02 and 0A bit 1 and 2 (the
* error bits) are reset by writing to register 00 or 08.
*/
-static void ns87415_bmdma_irq_clear(struct ata_port *ap)
+static void ns87415_irq_clear(struct ata_port *ap)
{
void __iomem *mmio = ap->ioaddr.bmdma_addr;
@@ -306,7 +306,7 @@
.bmdma_setup = ns87415_bmdma_setup,
.bmdma_start = ns87415_bmdma_start,
.bmdma_stop = ns87415_bmdma_stop,
- .irq_clear = ns87415_bmdma_irq_clear,
+ .irq_clear = ns87415_irq_clear,
.cable_detect = ata_cable_40wire,
.set_piomode = ns87415_set_piomode,
@@ -375,7 +375,7 @@
pci_write_config_byte(pdev, 0x55, 0xEE);
/* Select PIO0 8bit clocking */
pci_write_config_byte(pdev, 0x54, 0xB7);
- return ata_pci_init_one(pdev, ppi, &ns87415_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL);
}
static const struct pci_device_id ns87415_pci_tbl[] = {
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index c1da79a..e678af3 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -47,7 +47,7 @@
if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -181,7 +181,7 @@
}
/**
- * oldpiix_qc_issue_prot - command issue
+ * oldpiix_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -191,7 +191,7 @@
* be made PIO0.
*/
-static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int oldpiix_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -201,7 +201,7 @@
if (adev->dma_mode)
oldpiix_set_dmamode(ap, adev);
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
@@ -211,7 +211,7 @@
static struct ata_port_operations oldpiix_pata_ops = {
.inherits = &ata_bmdma_port_ops,
- .qc_issue = oldpiix_qc_issue_prot,
+ .qc_issue = oldpiix_qc_issue,
.cable_detect = ata_cable_40wire,
.set_piomode = oldpiix_set_piomode,
.set_dmamode = oldpiix_set_dmamode,
@@ -249,7 +249,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, ppi, &oldpiix_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL);
}
static const struct pci_device_id oldpiix_pci_tbl[] = {
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 4ddd03a..fb2cf66 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -64,7 +64,7 @@
if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -173,7 +173,7 @@
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
- return ata_pci_init_one(dev, ppi, &opti_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &opti_sht, NULL);
}
static const struct pci_device_id opti[] = {
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 36ac147..4cd7444 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -64,7 +64,7 @@
if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -430,7 +430,7 @@
if (optiplus_with_udma(dev))
ppi[0] = &info_82c700_udma;
- return ata_pci_init_one(dev, ppi, &optidma_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL);
}
static const struct pci_device_id optidma[] = {
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 57efbf0..2e206c5 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -133,7 +133,7 @@
static struct ata_port_operations pcmcia_port_ops = {
.inherits = &ata_sff_port_ops,
- .data_xfer = ata_data_xfer_noirq,
+ .data_xfer = ata_sff_data_xfer_noirq,
.cable_detect = ata_cable_40wire,
.set_mode = pcmcia_set_mode,
};
@@ -323,13 +323,13 @@
ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;
ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p;
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
}
/* activate */
- ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt,
+ ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_sff_interrupt,
IRQF_SHARED, &pcmcia_sht);
if (ret)
goto failed;
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index d235c9f..0e1c2c1 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -248,7 +248,7 @@
/* Check whether port enabled */
if (!pdc2027x_port_enabled(link->ap))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -265,7 +265,7 @@
struct ata_device *pair = ata_dev_pair(adev);
if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
/* Check for slave of a Maxtor at UDMA6 */
ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
@@ -274,7 +274,7 @@
if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6)
mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -759,8 +759,8 @@
return -EIO;
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &pdc2027x_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &pdc2027x_sht);
}
/**
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 8214100..d267306 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -324,7 +324,7 @@
return -ENODEV;
}
}
- return ata_pci_init_one(dev, ppi, &pdc202xx_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL);
}
static const struct pci_device_id pdc202xx[] = {
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 0588c9b..1edfc13 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -52,7 +52,7 @@
static struct ata_port_operations pata_platform_port_ops = {
.inherits = &ata_sff_port_ops,
- .data_xfer = ata_data_xfer_noirq,
+ .data_xfer = ata_sff_data_xfer_noirq,
.cable_detect = ata_cable_unknown,
.set_mode = pata_platform_set_mode,
.port_start = ATA_OP_NULL,
@@ -176,7 +176,7 @@
(unsigned long long)ctl_res->start);
/* activate */
- return ata_host_activate(host, irq, irq ? ata_interrupt : NULL,
+ return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
irq_flags, &pata_platform_sht);
}
EXPORT_SYMBOL_GPL(__pata_platform_probe);
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index d16b343..0d81dd5 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -102,14 +102,14 @@
}
/**
- * qdi_qc_issue_prot - command issue
+ * qdi_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings.
*/
-static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -121,7 +121,7 @@
outb(qdi->clock[adev->devno], qdi->timing);
}
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf,
@@ -148,7 +148,7 @@
buflen += 4 - slop;
}
} else
- buflen = ata_data_xfer(dev, buf, buflen, rw);
+ buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
return buflen;
}
@@ -159,7 +159,7 @@
static struct ata_port_operations qdi6500_port_ops = {
.inherits = &ata_sff_port_ops,
- .qc_issue = qdi_qc_issue_prot,
+ .qc_issue = qdi_qc_issue,
.data_xfer = qdi_data_xfer,
.cable_detect = ata_cable_40wire,
.set_piomode = qdi6500_set_piomode,
@@ -223,7 +223,7 @@
ap->ioaddr.cmd_addr = io_addr;
ap->ioaddr.altstatus_addr = ctl_addr;
ap->ioaddr.ctl_addr = ctl_addr;
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl);
@@ -239,7 +239,7 @@
printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
/* activate */
- ret = ata_host_activate(host, irq, ata_interrupt, 0, &qdi_sht);
+ ret = ata_host_activate(host, irq, ata_sff_interrupt, 0, &qdi_sht);
if (ret)
goto fail;
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 9ab84fc..1c0d9fa 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -156,7 +156,7 @@
}
/**
- * radisys_qc_issue_prot - command issue
+ * radisys_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -166,7 +166,7 @@
* be made PIO0.
*/
-static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int radisys_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -180,7 +180,7 @@
radisys_set_piomode(ap, adev);
}
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
@@ -190,7 +190,7 @@
static struct ata_port_operations radisys_pata_ops = {
.inherits = &ata_bmdma_port_ops,
- .qc_issue = radisys_qc_issue_prot,
+ .qc_issue = radisys_qc_issue,
.cable_detect = ata_cable_unknown,
.set_piomode = radisys_set_piomode,
.set_dmamode = radisys_set_dmamode,
@@ -228,7 +228,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, ppi, &radisys_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL);
}
static const struct pci_device_id radisys_pci_tbl[] = {
diff --git a/drivers/ata/pata_rb500_cf.c b/drivers/ata/pata_rb500_cf.c
index 7affceec..5b23d79 100644
--- a/drivers/ata/pata_rb500_cf.c
+++ b/drivers/ata/pata_rb500_cf.c
@@ -57,7 +57,7 @@
struct ata_host *ah = ap->host;
struct rb500_cf_info *info = ah->private_data;
- ata_altstatus(ap);
+ ata_sff_altstatus(ap);
ndelay(RB500_CF_IO_DELAY);
set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
@@ -109,7 +109,7 @@
if (gpio_get_value(info->gpio_line)) {
set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
if (!info->frozen)
- ata_interrupt(info->irq, dev_instance);
+ ata_sff_interrupt(info->irq, dev_instance);
} else {
set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
}
@@ -148,7 +148,7 @@
ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
}
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 462b72a..7dfd1f3 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -99,7 +99,7 @@
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
if (rz1000_fifo_disable(pdev) == 0)
- return ata_pci_init_one(pdev, ppi, &rz1000_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL);
printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
/* Not safe to use so skip */
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 42efacf..cbab397 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -151,7 +151,7 @@
}
/**
- * sc1200_qc_issue_prot - command issue
+ * sc1200_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -160,7 +160,7 @@
* one MWDMA/UDMA bit.
*/
-static unsigned int sc1200_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -175,7 +175,7 @@
sc1200_set_dmamode(ap, adev);
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct scsi_host_template sc1200_sht = {
@@ -185,8 +185,8 @@
static struct ata_port_operations sc1200_port_ops = {
.inherits = &ata_bmdma_port_ops,
- .qc_prep = ata_dumb_qc_prep,
- .qc_issue = sc1200_qc_issue_prot,
+ .qc_prep = ata_sff_dumb_qc_prep,
+ .qc_issue = sc1200_qc_issue,
.cable_detect = ata_cable_40wire,
.set_piomode = sc1200_set_piomode,
.set_dmamode = sc1200_set_dmamode,
@@ -213,7 +213,7 @@
/* Can't enable port 2 yet, see top comments */
const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
- return ata_pci_init_one(dev, ppi, &sc1200_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL);
}
static const struct pci_device_id sc1200[] = {
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index fba5bed..701d0ad 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -266,7 +266,7 @@
printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -274,7 +274,7 @@
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
- * Note: Original code is ata_tf_load().
+ * Note: Original code is ata_sff_tf_load().
*/
static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf)
@@ -341,7 +341,7 @@
* @ap: Port from which input is read
* @tf: ATA taskfile register set for storing input
*
- * Note: Original code is ata_tf_read().
+ * Note: Original code is ata_sff_tf_read().
*/
static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
@@ -373,7 +373,7 @@
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
*
- * Note: Original code is ata_exec_command().
+ * Note: Original code is ata_sff_exec_command().
*/
static void scc_exec_command (struct ata_port *ap,
@@ -382,7 +382,7 @@
DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
out_be32(ap->ioaddr.command_addr, tf->command);
- ata_pause(ap);
+ ata_sff_pause(ap);
}
/**
@@ -396,14 +396,14 @@
}
/**
- * scc_std_dev_select - Select device 0/1 on ATA bus
+ * scc_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
* @device: ATA device (numbered from zero) to select
*
- * Note: Original code is ata_std_dev_select().
+ * Note: Original code is ata_sff_dev_select().
*/
-static void scc_std_dev_select (struct ata_port *ap, unsigned int device)
+static void scc_dev_select (struct ata_port *ap, unsigned int device)
{
u8 tmp;
@@ -413,7 +413,7 @@
tmp = ATA_DEVICE_OBS | ATA_DEV1;
out_be32(ap->ioaddr.device_addr, tmp);
- ata_pause(ap);
+ ata_sff_pause(ap);
}
/**
@@ -514,7 +514,7 @@
* BSY bit to clear
*/
if (dev0) {
- rc = ata_wait_ready(ap, deadline);
+ rc = ata_sff_wait_ready(ap, deadline);
if (rc && rc != -ENODEV)
return rc;
}
@@ -535,7 +535,7 @@
msleep(50); /* give drive a breather */
}
if (dev1) {
- rc = ata_wait_ready(ap, deadline);
+ rc = ata_sff_wait_ready(ap, deadline);
if (rc && rc != -ENODEV)
return rc;
}
@@ -571,7 +571,7 @@
out_be32(ioaddr->ctl_addr, ap->ctl);
/* wait a while before checking status */
- ata_wait_after_reset(ap, deadline);
+ ata_sff_wait_after_reset(ap, deadline);
/* Before we perform post reset processing we want to see if
* the bus shows 0xFF because the odd clown forgets the D7
@@ -586,16 +586,16 @@
}
/**
- * scc_std_softreset - reset host port via ATA SRST
+ * scc_softreset - reset host port via ATA SRST
* @ap: port to reset
* @classes: resulting classes of attached devices
* @deadline: deadline jiffies for the operation
*
- * Note: Original code is ata_std_softreset().
+ * Note: Original code is ata_sff_softreset().
*/
-static int scc_std_softreset(struct ata_link *link, unsigned int *classes,
- unsigned long deadline)
+static int scc_softreset(struct ata_link *link, unsigned int *classes,
+ unsigned long deadline)
{
struct ata_port *ap = link->ap;
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
@@ -628,10 +628,10 @@
}
/* determine by signature whether we have ATA or ATAPI devices */
- classes[0] = ata_dev_try_classify(&ap->link.device[0],
+ classes[0] = ata_sff_dev_classify(&ap->link.device[0],
devmask & (1 << 0), &err);
if (slave_possible && err != 0x81)
- classes[1] = ata_dev_try_classify(&ap->link.device[1],
+ classes[1] = ata_sff_dev_classify(&ap->link.device[1],
devmask & (1 << 1), &err);
out:
@@ -695,7 +695,7 @@
printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
/* TBD: SW reset */
- scc_std_softreset(&ap->link, &classes, deadline);
+ scc_softreset(&ap->link, &classes, deadline);
continue;
}
@@ -721,7 +721,7 @@
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_altstatus(ap); /* dummy read */
+ ata_sff_altstatus(ap); /* dummy read */
}
/**
@@ -742,7 +742,7 @@
return host_stat;
/* errata A252,A308 workaround: Step4 */
- if ((ata_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
+ if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
return (host_stat | ATA_DMA_INTR);
/* errata A308 workaround Step5 */
@@ -773,7 +773,7 @@
* @buflen: buffer length
* @rw: read/write
*
- * Note: Original code is ata_data_xfer().
+ * Note: Original code is ata_sff_data_xfer().
*/
static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
@@ -815,7 +815,7 @@
* scc_irq_on - Enable interrupts on a port.
* @ap: Port on which interrupts are enabled.
*
- * Note: Original code is ata_irq_on().
+ * Note: Original code is ata_sff_irq_on().
*/
static u8 scc_irq_on (struct ata_port *ap)
@@ -835,13 +835,13 @@
}
/**
- * scc_bmdma_freeze - Freeze BMDMA controller port
+ * scc_freeze - Freeze BMDMA controller port
* @ap: port to freeze
*
- * Note: Original code is ata_bmdma_freeze().
+ * Note: Original code is ata_sff_freeze().
*/
-static void scc_bmdma_freeze (struct ata_port *ap)
+static void scc_freeze (struct ata_port *ap)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
@@ -868,18 +868,18 @@
static int scc_pata_prereset(struct ata_link *link, unsigned long deadline)
{
link->ap->cbl = ATA_CBL_PATA80;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
- * scc_std_postreset - standard postreset callback
+ * scc_postreset - standard postreset callback
* @ap: the target ata_port
* @classes: classes of attached devices
*
- * Note: Original code is ata_std_postreset().
+ * Note: Original code is ata_sff_postreset().
*/
-static void scc_std_postreset(struct ata_link *link, unsigned int *classes)
+static void scc_postreset(struct ata_link *link, unsigned int *classes)
{
struct ata_port *ap = link->ap;
@@ -905,13 +905,13 @@
}
/**
- * scc_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * scc_irq_clear - Clear PCI IDE BMDMA interrupt.
* @ap: Port associated with this ATA transaction.
*
- * Note: Original code is ata_bmdma_irq_clear().
+ * Note: Original code is ata_sff_irq_clear().
*/
-static void scc_bmdma_irq_clear (struct ata_port *ap)
+static void scc_irq_clear (struct ata_port *ap)
{
void __iomem *mmio = ap->ioaddr.bmdma_addr;
@@ -972,7 +972,7 @@
.exec_command = scc_exec_command,
.check_status = scc_check_status,
.check_altstatus = scc_check_altstatus,
- .dev_select = scc_std_dev_select,
+ .dev_select = scc_dev_select,
.bmdma_setup = scc_bmdma_setup,
.bmdma_start = scc_bmdma_start,
@@ -980,13 +980,13 @@
.bmdma_status = scc_bmdma_status,
.data_xfer = scc_data_xfer,
- .freeze = scc_bmdma_freeze,
+ .freeze = scc_freeze,
.prereset = scc_pata_prereset,
- .softreset = scc_std_softreset,
- .postreset = scc_std_postreset,
+ .softreset = scc_softreset,
+ .postreset = scc_postreset,
.post_internal_cmd = scc_bmdma_stop,
- .irq_clear = scc_bmdma_irq_clear,
+ .irq_clear = scc_irq_clear,
.irq_on = scc_irq_on,
.port_start = scc_port_start,
@@ -1140,8 +1140,8 @@
if (rc)
return rc;
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &scc_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &scc_sht);
}
static struct pci_driver scc_pci_driver = {
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 2f4f9b0..ffd26d0 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -199,7 +199,7 @@
{
if (adev->class == ATA_DEV_ATA)
mask &= ~ATA_MASK_UDMA;
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
@@ -219,7 +219,7 @@
/* Disk, UDMA */
if (adev->class != ATA_DEV_ATA)
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
/* Actually do need to check */
ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
@@ -228,7 +228,7 @@
if (!strcmp(p, model_num))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -459,9 +459,9 @@
serverworks_fixup_ht1000(pdev);
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
- ata_pci_clear_simplex(pdev);
+ ata_pci_bmdma_clear_simplex(pdev);
- return ata_pci_init_one(pdev, ppi, &serverworks_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL);
}
#ifdef CONFIG_PM
@@ -482,7 +482,7 @@
serverworks_fixup_osb4(pdev);
break;
case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
- ata_pci_clear_simplex(pdev);
+ ata_pci_bmdma_clear_simplex(pdev);
/* fall through */
case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 63fafc6..720b864 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -350,19 +350,19 @@
host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
- ata_std_ports(&host->ports[0]->ioaddr);
+ ata_sff_std_ports(&host->ports[0]->ioaddr);
host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
- ata_std_ports(&host->ports[1]->ioaddr);
+ ata_sff_std_ports(&host->ports[1]->ioaddr);
/* Register & activate */
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &sil680_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &sil680_sht);
use_ioports:
- return ata_pci_init_one(pdev, ppi, &sil680_sht, NULL);
+ return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 793e671..e82c66e 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -156,7 +156,7 @@
/* Clear the FIFO settings. We can't enable the FIFO until
we know we are poking at a disk */
pci_write_config_byte(pdev, 0x4B, 0);
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
@@ -821,7 +821,7 @@
sis_fixup(pdev, chipset);
- return ata_pci_init_one(pdev, ppi, &sis_sht, chipset);
+ return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset);
}
static const struct pci_device_id sis_pci_tbl[] = {
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index bee11ca..70d94fb 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -60,7 +60,7 @@
if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
@@ -317,7 +317,7 @@
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
- return ata_pci_init_one(dev, ppi, &sl82c105_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL);
}
static const struct pci_device_id sl82c105[] = {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index bd546a3..b181261 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -66,7 +66,7 @@
if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
@@ -201,7 +201,7 @@
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
- return ata_pci_init_one(dev, ppi, &triflex_sht, NULL);
+ return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL);
}
static const struct pci_device_id triflex[] = {
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 2928fa1..4b85f84 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -210,7 +210,7 @@
return -ENOENT;
}
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
@@ -336,7 +336,7 @@
static struct ata_port_operations via_port_ops_noirq = {
.inherits = &via_port_ops,
- .data_xfer = ata_data_xfer_noirq,
+ .data_xfer = ata_sff_data_xfer_noirq,
};
/**
@@ -511,7 +511,7 @@
}
/* We have established the device type, now fire it up */
- return ata_pci_init_one(pdev, ppi, &via_sht, (void *)config);
+ return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index f235bb0..cc18231 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -116,7 +116,7 @@
buflen += 4 - slop;
}
} else
- buflen = ata_data_xfer(dev, buf, buflen, rw);
+ buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
return buflen;
}
@@ -198,7 +198,7 @@
ap->ioaddr.cmd_addr = cmd_addr;
ap->ioaddr.altstatus_addr = ctl_addr;
ap->ioaddr.ctl_addr = ctl_addr;
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
/* hook in a private data structure per channel */
host->private_data = &winbond_data[nr_winbond_host];
@@ -206,7 +206,7 @@
winbond_data[nr_winbond_host].platform_dev = pdev;
/* activate */
- rc = ata_host_activate(host, 14 + i, ata_interrupt, 0,
+ rc = ata_host_activate(host, 14 + i, ata_sff_interrupt, 0,
&winbond_sht);
if (rc)
goto err_unregister;
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index c431bf3..be53545 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -208,7 +208,7 @@
/* mask/clear ATA interrupts */
writeb(ATA_NIEN, ap->ioaddr.ctl_addr);
- ata_check_status(ap);
+ ata_sff_check_status(ap);
/* reset the ADMA engine */
adma_reset_engine(ap);
@@ -243,7 +243,7 @@
/* mask/clear ATA interrupts */
writeb(ATA_NIEN, ap->ioaddr.ctl_addr);
- ata_check_status(ap);
+ ata_sff_check_status(ap);
/* reset ADMA to idle state */
writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL);
@@ -266,7 +266,7 @@
pp->state = adma_state_mmio;
adma_reinit_engine(ap);
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
static int adma_fill_sg(struct ata_queued_cmd *qc)
@@ -322,7 +322,7 @@
adma_enter_reg_mode(qc->ap);
if (qc->tf.protocol != ATA_PROT_DMA) {
- ata_qc_prep(qc);
+ ata_sff_qc_prep(qc);
return;
}
@@ -421,7 +421,7 @@
}
pp->state = adma_state_mmio;
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static inline unsigned int adma_intr_pkt(struct ata_host *host)
@@ -492,7 +492,7 @@
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
/* check main status, clearing INTRQ */
- u8 status = ata_check_status(ap);
+ u8 status = ata_sff_check_status(ap);
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 12fbf38..6e6fca4 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -271,7 +271,7 @@
return;
}
- if (likely(ata_host_intr(ap, qc)))
+ if (likely(ata_sff_host_intr(ap, qc)))
return;
ap->ops->check_status(ap); /* clear ATA interrupt */
@@ -356,7 +356,7 @@
return AC_ERR_HSM;
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static void inic_freeze(struct ata_port *ap)
@@ -418,9 +418,9 @@
struct ata_taskfile tf;
/* wait a while before checking status */
- ata_wait_after_reset(ap, deadline);
+ ata_sff_wait_after_reset(ap, deadline);
- rc = ata_wait_ready(ap, deadline);
+ rc = ata_sff_wait_ready(ap, deadline);
/* link occupied, -ENODEV too is an error */
if (rc) {
ata_link_printk(link, KERN_WARNING, "device not ready "
@@ -428,7 +428,7 @@
return rc;
}
- ata_tf_read(ap, &tf);
+ ata_sff_tf_read(ap, &tf);
*class = ata_dev_classify(&tf);
if (*class == ATA_DEV_UNKNOWN)
*class = ATA_DEV_NONE;
@@ -663,7 +663,7 @@
((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR;
- ata_std_ports(port);
+ ata_sff_std_ports(port);
ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio");
ata_port_pbar_desc(ap, MMIO_BAR, offset, "port");
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 16c15ed..fa75df6 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1386,7 +1386,7 @@
* shadow block, etc registers.
*/
mv_stop_edma(ap);
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
mv_start_dma(ap, port_mmio, pp, qc->tf.protocol);
@@ -2362,7 +2362,7 @@
*/
retry = 20;
while (1) {
- u8 drv_stat = ata_check_status(ap);
+ u8 drv_stat = ata_sff_check_status(ap);
if ((drv_stat != 0x80) && (drv_stat != 0x7f))
break;
msleep(500);
@@ -2377,7 +2377,7 @@
*/
/* finally, read device signature from TF registers */
- *class = ata_dev_try_classify(ap->link.device, 1, NULL);
+ *class = ata_sff_dev_classify(ap->link.device, 1, NULL);
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 95fd0cd..63cc437 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -730,7 +730,7 @@
ADMA mode could abort outstanding commands. */
nv_adma_register_mode(ap);
- ata_tf_read(ap, tf);
+ ata_sff_tf_read(ap, tf);
}
static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb)
@@ -844,12 +844,12 @@
/* DEV interrupt w/ no active qc? */
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
- ata_check_status(ap);
+ ata_sff_check_status(ap);
return 1;
}
/* handle interrupt */
- return ata_host_intr(ap, qc);
+ return ata_sff_host_intr(ap, qc);
}
static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
@@ -1028,7 +1028,7 @@
u32 notifier_clears[2];
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
- ata_bmdma_irq_clear(ap);
+ ata_sff_irq_clear(ap);
return;
}
@@ -1059,7 +1059,7 @@
struct nv_adma_port_priv *pp = qc->ap->private_data;
if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
- ata_bmdma_post_internal_cmd(qc);
+ ata_sff_post_internal_cmd(qc);
}
static int nv_adma_port_start(struct ata_port *ap)
@@ -1336,7 +1336,7 @@
BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
(qc->flags & ATA_QCFLAG_DMAMAP));
nv_adma_register_mode(qc->ap);
- ata_qc_prep(qc);
+ ata_sff_qc_prep(qc);
return;
}
@@ -1395,7 +1395,7 @@
BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
(qc->flags & ATA_QCFLAG_DMAMAP));
nv_adma_register_mode(qc->ap);
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
} else
nv_adma_mode(qc->ap);
@@ -1436,7 +1436,7 @@
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
- handled += ata_host_intr(ap, qc);
+ handled += ata_sff_host_intr(ap, qc);
else
// No request pending? Clear interrupt status
// anyway, in case there's one pending.
@@ -1571,7 +1571,7 @@
mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
mask &= ~(NV_INT_ALL_MCP55 << shift);
writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
- ata_bmdma_freeze(ap);
+ ata_sff_freeze(ap);
}
static void nv_mcp55_thaw(struct ata_port *ap)
@@ -1585,7 +1585,7 @@
mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
mask |= (NV_INT_MASK_MCP55 << shift);
writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
- ata_bmdma_thaw(ap);
+ ata_sff_thaw(ap);
}
static int nv_hardreset(struct ata_link *link, unsigned int *class,
@@ -1597,7 +1597,7 @@
* some controllers. Don't classify on hardreset. For more
* info, see http://bugzilla.kernel.org/show_bug.cgi?id=3352
*/
- return sata_std_hardreset(link, &dummy, deadline);
+ return sata_sff_hardreset(link, &dummy, deadline);
}
static void nv_adma_error_handler(struct ata_port *ap)
@@ -1653,7 +1653,7 @@
readw(mmio + NV_ADMA_CTL); /* flush posted write */
}
- ata_bmdma_error_handler(ap);
+ ata_sff_error_handler(ap);
}
static void nv_swncq_qc_to_dq(struct ata_port *ap, struct ata_queued_cmd *qc)
@@ -1779,7 +1779,7 @@
ehc->i.action |= ATA_EH_RESET;
}
- ata_bmdma_error_handler(ap);
+ ata_sff_error_handler(ap);
}
#ifdef CONFIG_PM
@@ -1925,7 +1925,7 @@
static void nv_swncq_qc_prep(struct ata_queued_cmd *qc)
{
if (qc->tf.protocol != ATA_PROT_NCQ) {
- ata_qc_prep(qc);
+ ata_sff_qc_prep(qc);
return;
}
@@ -2001,7 +2001,7 @@
struct nv_swncq_port_priv *pp = ap->private_data;
if (qc->tf.protocol != ATA_PROT_NCQ)
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
DPRINTK("Enter\n");
@@ -2350,7 +2350,7 @@
ppi[0] = &nv_port_info[type];
ipriv = ppi[0]->private_data;
- rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 5a0a03a..9923e860 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -143,7 +143,7 @@
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc);
static void pdc_irq_clear(struct ata_port *ap);
-static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
+static unsigned int pdc_qc_issue(struct ata_queued_cmd *qc);
static void pdc_freeze(struct ata_port *ap);
static void pdc_sata_freeze(struct ata_port *ap);
static void pdc_thaw(struct ata_port *ap);
@@ -166,7 +166,7 @@
.exec_command = pdc_exec_command_mmio,
.check_atapi_dma = pdc_check_atapi_dma,
.qc_prep = pdc_qc_prep,
- .qc_issue = pdc_qc_issue_prot,
+ .qc_issue = pdc_qc_issue,
.irq_clear = pdc_irq_clear,
.post_internal_cmd = pdc_post_internal_cmd,
@@ -894,7 +894,7 @@
readl(ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
}
-static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int pdc_qc_issue(struct ata_queued_cmd *qc)
{
switch (qc->tf.protocol) {
case ATAPI_PROT_NODATA:
@@ -914,20 +914,20 @@
break;
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA);
- ata_tf_load(ap, tf);
+ ata_sff_tf_load(ap, tf);
}
static void pdc_exec_command_mmio(struct ata_port *ap,
const struct ata_taskfile *tf)
{
WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA);
- ata_exec_command(ap, tf);
+ ata_sff_exec_command(ap, tf);
}
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 2ceb099..1600107 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -239,7 +239,7 @@
struct ata_port *ap = link->ap;
qs_reset_channel_logic(ap);
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
static int qs_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
@@ -303,7 +303,7 @@
qs_enter_reg_mode(qc->ap);
if (qc->tf.protocol != ATA_PROT_DMA) {
- ata_qc_prep(qc);
+ ata_sff_qc_prep(qc);
return;
}
@@ -362,7 +362,7 @@
}
pp->state = qs_state_mmio;
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static void qs_do_or_die(struct ata_queued_cmd *qc, u8 status)
@@ -451,7 +451,7 @@
* and pretend we knew it was ours.. (ugh).
* This does not affect packet mode.
*/
- ata_check_status(ap);
+ ata_sff_check_status(ap);
handled = 1;
continue;
}
@@ -459,7 +459,7 @@
if (!pp || pp->state != qs_state_mmio)
continue;
if (!(qc->tf.flags & ATA_TFLAG_POLLING))
- handled |= ata_host_intr(ap, qc);
+ handled |= ata_sff_host_intr(ap, qc);
}
}
return handled;
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 659dfcb..987313b 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -410,10 +410,10 @@
goto err_hsm;
/* ack bmdma irq events */
- ata_bmdma_irq_clear(ap);
+ ata_sff_irq_clear(ap);
/* kick HSM in the ass */
- ata_hsm_move(ap, qc, status, 0);
+ ata_sff_hsm_move(ap, qc, status, 0);
if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol))
ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2);
@@ -481,7 +481,7 @@
/* clear IRQ */
ap->ops->check_status(ap);
- ata_bmdma_irq_clear(ap);
+ ata_sff_irq_clear(ap);
/* turn on SATA IRQ if supported */
if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
@@ -655,7 +655,7 @@
ioaddr->ctl_addr = mmio_base + sil_port[i].ctl;
ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma;
ioaddr->scr_addr = mmio_base + sil_port[i].scr;
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio");
ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf");
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 9089c7a..6b8e45b 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -309,7 +309,7 @@
break;
}
- rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
@@ -327,8 +327,8 @@
pci_set_master(pdev);
pci_intx(pdev, 1);
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &sis_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &sis_sht);
}
static int __init sis_init(void)
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 8636f16..7b94110 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -492,8 +492,8 @@
writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &k2_sata_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &k2_sata_sht);
}
/* 0x240 is device ID for Apple K2 device
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 8d7f395..40be2ff 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -232,7 +232,7 @@
static void pdc20621_put_to_dimm(struct ata_host *host,
void *psource, u32 offset, u32 size);
static void pdc20621_irq_clear(struct ata_port *ap);
-static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc);
+static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc);
static struct scsi_host_template pdc_sata_sht = {
@@ -244,17 +244,17 @@
/* TODO: inherit from base port_ops after converting to new EH */
static struct ata_port_operations pdc_20621_ops = {
.tf_load = pdc_tf_load_mmio,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
+ .tf_read = ata_sff_tf_read,
+ .check_status = ata_sff_check_status,
.exec_command = pdc_exec_command_mmio,
- .dev_select = ata_std_dev_select,
+ .dev_select = ata_sff_dev_select,
.phy_reset = pdc_20621_phy_reset,
.qc_prep = pdc20621_qc_prep,
- .qc_issue = pdc20621_qc_issue_prot,
- .data_xfer = ata_data_xfer,
+ .qc_issue = pdc20621_qc_issue,
+ .data_xfer = ata_sff_data_xfer,
.eng_timeout = pdc_eng_timeout,
.irq_clear = pdc20621_irq_clear,
- .irq_on = ata_irq_on,
+ .irq_on = ata_sff_irq_on,
.port_start = pdc_port_start,
};
@@ -682,7 +682,7 @@
}
}
-static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc)
{
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
@@ -698,7 +698,7 @@
break;
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static inline unsigned int pdc20621_host_intr(struct ata_port *ap,
@@ -770,7 +770,7 @@
/* command completion, but no data xfer */
} else if (qc->tf.protocol == ATA_PROT_NODATA) {
- status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+ status = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
DPRINTK("BUS_NODATA (drv_stat 0x%X)\n", status);
qc->err_mask |= ac_err_mask(status);
ata_qc_complete(qc);
@@ -879,7 +879,7 @@
break;
default:
- drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+ drv_stat = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
ata_port_printk(ap, KERN_ERR,
"unknown timeout, cmd 0x%x stat 0x%x\n",
@@ -898,7 +898,7 @@
{
WARN_ON(tf->protocol == ATA_PROT_DMA ||
tf->protocol == ATA_PROT_NODATA);
- ata_tf_load(ap, tf);
+ ata_sff_tf_load(ap, tf);
}
@@ -906,7 +906,7 @@
{
WARN_ON(tf->protocol == ATA_PROT_DMA ||
tf->protocol == ATA_PROT_NODATA);
- ata_exec_command(ap, tf);
+ ata_sff_exec_command(ap, tf);
}
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 6ecd13f..f277cea 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -175,11 +175,11 @@
host->private_data = hpriv;
/* the first two ports are standard SFF */
- rc = ata_pci_init_sff_host(host);
+ rc = ata_pci_sff_init_host(host);
if (rc)
return rc;
- rc = ata_pci_init_bmdma(host);
+ rc = ata_pci_bmdma_init(host);
if (rc)
return rc;
@@ -200,7 +200,7 @@
((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4;
ioaddr->bmdma_addr = iomap[4] + 16;
hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4;
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ata_port_desc(host->ports[2],
"cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
@@ -215,7 +215,7 @@
((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4;
ioaddr->bmdma_addr = iomap[4] + 24;
hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5;
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ata_port_desc(host->ports[2],
"cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
@@ -242,8 +242,8 @@
pci_set_master(pdev);
pci_intx(pdev, 1);
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &uli_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &uli_sht);
}
static int __init uli_init(void)
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 4bc6e84..9323bc2 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -174,7 +174,7 @@
* certain way. Leave it alone and just clear pending IRQ.
*/
ap->ops->check_status(ap);
- ata_bmdma_irq_clear(ap);
+ ata_sff_irq_clear(ap);
}
/**
@@ -242,7 +242,7 @@
skip_scr:
/* wait for !BSY */
- ata_wait_ready(ap, deadline);
+ ata_sff_wait_ready(ap, deadline);
return 0;
}
@@ -304,7 +304,7 @@
ioaddr->bmdma_addr = bmdma_addr;
ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no);
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ata_port_pbar_desc(ap, ap->port_no, -1, "port");
ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma");
@@ -316,7 +316,7 @@
struct ata_host *host;
int rc;
- rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
*r_host = host;
@@ -448,8 +448,8 @@
svia_configure(pdev);
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &svia_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &svia_sht);
}
static int __init svia_init(void)
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index fb3a887..2c3c769 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -200,7 +200,7 @@
struct ata_ioports *ioaddr = &ap->ioaddr;
u16 nsect, lbal, lbam, lbah, feature;
- tf->command = ata_check_status(ap);
+ tf->command = ata_sff_check_status(ap);
tf->device = readw(ioaddr->device_addr);
feature = readw(ioaddr->error_addr);
nsect = readw(ioaddr->nsect_addr);
@@ -243,7 +243,7 @@
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
- handled = ata_host_intr(ap, qc);
+ handled = ata_sff_host_intr(ap, qc);
/* We received an interrupt during a polled command,
* or some other spurious condition. Interrupt reporting