bnx2x: Add new MAC support for 578xx
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 347f323..8734639 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -105,12 +105,6 @@
MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG
#define GP_STATUS_10G_CX4 \
MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4
-#define GP_STATUS_12G_HIG \
- MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG
-#define GP_STATUS_12_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G
-#define GP_STATUS_13G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G
-#define GP_STATUS_15G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G
-#define GP_STATUS_16G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G
#define GP_STATUS_1G_KX MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX
#define GP_STATUS_10G_KX4 \
MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4
@@ -128,16 +122,6 @@
#define LINK_2500XFD LINK_STATUS_SPEED_AND_DUPLEX_2500XFD
#define LINK_10GTFD LINK_STATUS_SPEED_AND_DUPLEX_10GTFD
#define LINK_10GXFD LINK_STATUS_SPEED_AND_DUPLEX_10GXFD
-#define LINK_12GTFD LINK_STATUS_SPEED_AND_DUPLEX_12GTFD
-#define LINK_12GXFD LINK_STATUS_SPEED_AND_DUPLEX_12GXFD
-#define LINK_12_5GTFD LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD
-#define LINK_12_5GXFD LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD
-#define LINK_13GTFD LINK_STATUS_SPEED_AND_DUPLEX_13GTFD
-#define LINK_13GXFD LINK_STATUS_SPEED_AND_DUPLEX_13GXFD
-#define LINK_15GTFD LINK_STATUS_SPEED_AND_DUPLEX_15GTFD
-#define LINK_15GXFD LINK_STATUS_SPEED_AND_DUPLEX_15GXFD
-#define LINK_16GTFD LINK_STATUS_SPEED_AND_DUPLEX_16GTFD
-#define LINK_16GXFD LINK_STATUS_SPEED_AND_DUPLEX_16GXFD
#define PHY_XGXS_FLAG 0x1
#define PHY_SGMII_FLAG 0x2
@@ -167,8 +151,103 @@
#define EDC_MODE_PASSIVE_DAC 0x0055
+/* BRB thresholds for E2*/
+#define PFC_E2_BRB_MAC_PAUSE_XOFF_THR_PAUSE 170
+#define PFC_E2_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE 0
+
+#define PFC_E2_BRB_MAC_PAUSE_XON_THR_PAUSE 250
+#define PFC_E2_BRB_MAC_PAUSE_XON_THR_NON_PAUSE 0
+
+#define PFC_E2_BRB_MAC_FULL_XOFF_THR_PAUSE 10
+#define PFC_E2_BRB_MAC_FULL_XOFF_THR_NON_PAUSE 90
+
+#define PFC_E2_BRB_MAC_FULL_XON_THR_PAUSE 50
+#define PFC_E2_BRB_MAC_FULL_XON_THR_NON_PAUSE 250
+
+/* BRB thresholds for E3A0 */
+#define PFC_E3A0_BRB_MAC_PAUSE_XOFF_THR_PAUSE 290
+#define PFC_E3A0_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE 0
+
+#define PFC_E3A0_BRB_MAC_PAUSE_XON_THR_PAUSE 410
+#define PFC_E3A0_BRB_MAC_PAUSE_XON_THR_NON_PAUSE 0
+
+#define PFC_E3A0_BRB_MAC_FULL_XOFF_THR_PAUSE 10
+#define PFC_E3A0_BRB_MAC_FULL_XOFF_THR_NON_PAUSE 170
+
+#define PFC_E3A0_BRB_MAC_FULL_XON_THR_PAUSE 50
+#define PFC_E3A0_BRB_MAC_FULL_XON_THR_NON_PAUSE 410
+
+
+/* BRB thresholds for E3B0 2 port mode*/
+#define PFC_E3B0_2P_BRB_MAC_PAUSE_XOFF_THR_PAUSE 1025
+#define PFC_E3B0_2P_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE 0
+
+#define PFC_E3B0_2P_BRB_MAC_PAUSE_XON_THR_PAUSE 1025
+#define PFC_E3B0_2P_BRB_MAC_PAUSE_XON_THR_NON_PAUSE 0
+
+#define PFC_E3B0_2P_BRB_MAC_FULL_XOFF_THR_PAUSE 10
+#define PFC_E3B0_2P_BRB_MAC_FULL_XOFF_THR_NON_PAUSE 1025
+
+#define PFC_E3B0_2P_BRB_MAC_FULL_XON_THR_PAUSE 50
+#define PFC_E3B0_2P_BRB_MAC_FULL_XON_THR_NON_PAUSE 1025
+
+/* only for E3B0*/
+#define PFC_E3B0_2P_BRB_FULL_LB_XOFF_THR 1025
+#define PFC_E3B0_2P_BRB_FULL_LB_XON_THR 1025
+
+/* Lossy +Lossless GUARANTIED == GUART */
+#define PFC_E3B0_2P_MIX_PAUSE_LB_GUART 284
+/* Lossless +Lossless*/
+#define PFC_E3B0_2P_PAUSE_LB_GUART 236
+/* Lossy +Lossy*/
+#define PFC_E3B0_2P_NON_PAUSE_LB_GUART 342
+
+/* Lossy +Lossless*/
+#define PFC_E3B0_2P_MIX_PAUSE_MAC_0_CLASS_T_GUART 284
+/* Lossless +Lossless*/
+#define PFC_E3B0_2P_PAUSE_MAC_0_CLASS_T_GUART 236
+/* Lossy +Lossy*/
+#define PFC_E3B0_2P_NON_PAUSE_MAC_0_CLASS_T_GUART 336
+#define PFC_E3B0_2P_BRB_MAC_0_CLASS_T_GUART_HYST 80
+
+#define PFC_E3B0_2P_BRB_MAC_1_CLASS_T_GUART 0
+#define PFC_E3B0_2P_BRB_MAC_1_CLASS_T_GUART_HYST 0
+
+/* BRB thresholds for E3B0 4 port mode */
+#define PFC_E3B0_4P_BRB_MAC_PAUSE_XOFF_THR_PAUSE 304
+#define PFC_E3B0_4P_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE 0
+
+#define PFC_E3B0_4P_BRB_MAC_PAUSE_XON_THR_PAUSE 384
+#define PFC_E3B0_4P_BRB_MAC_PAUSE_XON_THR_NON_PAUSE 0
+
+#define PFC_E3B0_4P_BRB_MAC_FULL_XOFF_THR_PAUSE 10
+#define PFC_E3B0_4P_BRB_MAC_FULL_XOFF_THR_NON_PAUSE 304
+
+#define PFC_E3B0_4P_BRB_MAC_FULL_XON_THR_PAUSE 50
+#define PFC_E3B0_4P_BRB_MAC_FULL_XON_THR_NON_PAUSE 384
+
+
+/* only for E3B0*/
+#define PFC_E3B0_4P_BRB_FULL_LB_XOFF_THR 304
+#define PFC_E3B0_4P_BRB_FULL_LB_XON_THR 384
+#define PFC_E3B0_4P_LB_GUART 120
+
+#define PFC_E3B0_4P_BRB_MAC_0_CLASS_T_GUART 120
+#define PFC_E3B0_4P_BRB_MAC_0_CLASS_T_GUART_HYST 80
+
+#define PFC_E3B0_4P_BRB_MAC_1_CLASS_T_GUART 80
+#define PFC_E3B0_4P_BRB_MAC_1_CLASS_T_GUART_HYST 120
+
+#define DCBX_INVALID_COS (0xFF)
+
#define ETS_BW_LIMIT_CREDIT_UPPER_BOUND (0x5000)
#define ETS_BW_LIMIT_CREDIT_WEIGHT (0x5000)
+#define ETS_E3B0_NIG_MIN_W_VAL_UP_TO_10GBPS (1360)
+#define ETS_E3B0_NIG_MIN_W_VAL_20GBPS (2720)
+#define ETS_E3B0_PBF_MIN_W_VAL (10000)
+
+#define MAX_PACKET_SIZE (9700)
+
/**********************************************************/
/* INTERFACE */
/**********************************************************/
@@ -390,6 +469,53 @@
/* PFC section */
/******************************************************************/
+static void bnx2x_update_pfc_xmac(struct link_params *params,
+ struct link_vars *vars,
+ u8 is_lb)
+{
+ struct bnx2x *bp = params->bp;
+ u32 xmac_base;
+ u32 pause_val, pfc0_val, pfc1_val;
+
+ /* XMAC base adrr */
+ xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
+
+ /* Initialize pause and pfc registers */
+ pause_val = 0x18000;
+ pfc0_val = 0xFFFF8000;
+ pfc1_val = 0x2;
+
+ /* No PFC support */
+ if (!(params->feature_config_flags &
+ FEATURE_CONFIG_PFC_ENABLED)) {
+
+ /*
+ * RX flow control - Process pause frame in receive direction
+ */
+ if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
+ pause_val |= XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN;
+
+ /*
+ * TX flow control - Send pause packet when buffer is full
+ */
+ if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
+ pause_val |= XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN;
+ } else {/* PFC support */
+ pfc1_val |= XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN |
+ XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN |
+ XMAC_PFC_CTRL_HI_REG_RX_PFC_EN |
+ XMAC_PFC_CTRL_HI_REG_TX_PFC_EN;
+ }
+
+ /* Write pause and PFC registers */
+ REG_WR(bp, xmac_base + XMAC_REG_PAUSE_CTRL, pause_val);
+ REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL, pfc0_val);
+ REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI, pfc1_val);
+
+ udelay(30);
+}
+
+
static void bnx2x_bmac2_get_pfc_stat(struct link_params *params,
u32 pfc_frames_sent[2],
u32 pfc_frames_received[2])
@@ -533,6 +659,233 @@
EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + 4, val);
}
+static void bnx2x_set_xumac_nig(struct link_params *params,
+ u16 tx_pause_en,
+ u8 enable)
+{
+ struct bnx2x *bp = params->bp;
+
+ REG_WR(bp, params->port ? NIG_REG_P1_MAC_IN_EN : NIG_REG_P0_MAC_IN_EN,
+ enable);
+ REG_WR(bp, params->port ? NIG_REG_P1_MAC_OUT_EN : NIG_REG_P0_MAC_OUT_EN,
+ enable);
+ REG_WR(bp, params->port ? NIG_REG_P1_MAC_PAUSE_OUT_EN :
+ NIG_REG_P0_MAC_PAUSE_OUT_EN, tx_pause_en);
+}
+
+static void bnx2x_umac_enable(struct link_params *params,
+ struct link_vars *vars, u8 lb)
+{
+ u32 val;
+ u32 umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
+ struct bnx2x *bp = params->bp;
+ /* Reset UMAC */
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+ (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port));
+ usleep_range(1000, 1000);
+
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
+ (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port));
+
+ DP(NETIF_MSG_LINK, "enabling UMAC\n");
+
+ /**
+ * This register determines on which events the MAC will assert
+ * error on the i/f to the NIG along w/ EOP.
+ */
+
+ /**
+ * BD REG_WR(bp, NIG_REG_P0_MAC_RSV_ERR_MASK +
+ * params->port*0x14, 0xfffff.
+ */
+ /* This register opens the gate for the UMAC despite its name */
+ REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 1);
+
+ val = UMAC_COMMAND_CONFIG_REG_PROMIS_EN |
+ UMAC_COMMAND_CONFIG_REG_PAD_EN |
+ UMAC_COMMAND_CONFIG_REG_SW_RESET |
+ UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK;
+ switch (vars->line_speed) {
+ case SPEED_10:
+ val |= (0<<2);
+ break;
+ case SPEED_100:
+ val |= (1<<2);
+ break;
+ case SPEED_1000:
+ val |= (2<<2);
+ break;
+ case SPEED_2500:
+ val |= (3<<2);
+ break;
+ default:
+ DP(NETIF_MSG_LINK, "Invalid speed for UMAC %d\n",
+ vars->line_speed);
+ break;
+ }
+ REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val);
+ udelay(50);
+
+ /* Enable RX and TX */
+ val &= ~UMAC_COMMAND_CONFIG_REG_PAD_EN;
+ val |= UMAC_COMMAND_CONFIG_REG_TX_ENA |
+ UMAC_COMMAND_CONFIG_REG_RX_ENA;
+ REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val);
+ udelay(50);
+
+ /* Remove SW Reset */
+ val &= ~UMAC_COMMAND_CONFIG_REG_SW_RESET;
+
+ /* Check loopback mode */
+ if (lb)
+ val |= UMAC_COMMAND_CONFIG_REG_LOOP_ENA;
+ REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val);
+
+ /*
+ * Maximum Frame Length (RW). Defines a 14-Bit maximum frame
+ * length used by the MAC receive logic to check frames.
+ */
+ REG_WR(bp, umac_base + UMAC_REG_MAXFR, 0x2710);
+ bnx2x_set_xumac_nig(params,
+ ((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1);
+ vars->mac_type = MAC_TYPE_UMAC;
+
+}
+
+static u8 bnx2x_is_4_port_mode(struct bnx2x *bp)
+{
+ u32 port4mode_ovwr_val;
+ /* Check 4-port override enabled */
+ port4mode_ovwr_val = REG_RD(bp, MISC_REG_PORT4MODE_EN_OVWR);
+ if (port4mode_ovwr_val & (1<<0)) {
+ /* Return 4-port mode override value */
+ return ((port4mode_ovwr_val & (1<<1)) == (1<<1));
+ }
+ /* Return 4-port mode from input pin */
+ return (u8)REG_RD(bp, MISC_REG_PORT4MODE_EN);
+}
+
+/* Define the XMAC mode */
+static void bnx2x_xmac_init(struct bnx2x *bp, u32 max_speed)
+{
+ u32 is_port4mode = bnx2x_is_4_port_mode(bp);
+
+ /**
+ * In 4-port mode, need to set the mode only once, so if XMAC is
+ * already out of reset, it means the mode has already been set,
+ * and it must not* reset the XMAC again, since it controls both
+ * ports of the path
+ **/
+
+ if (is_port4mode && (REG_RD(bp, MISC_REG_RESET_REG_2) &
+ MISC_REGISTERS_RESET_REG_2_XMAC)) {
+ DP(NETIF_MSG_LINK, "XMAC already out of reset"
+ " in 4-port mode\n");
+ return;
+ }
+
+ /* Hard reset */
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+ MISC_REGISTERS_RESET_REG_2_XMAC);
+ usleep_range(1000, 1000);
+
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
+ MISC_REGISTERS_RESET_REG_2_XMAC);
+ if (is_port4mode) {
+ DP(NETIF_MSG_LINK, "Init XMAC to 2 ports x 10G per path\n");
+
+ /* Set the number of ports on the system side to up to 2 */
+ REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 1);
+
+ /* Set the number of ports on the Warp Core to 10G */
+ REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 3);
+ } else {
+ /* Set the number of ports on the system side to 1 */
+ REG_WR(bp, MISC_REG_XMAC_CORE_PORT_MODE, 0);
+ if (max_speed == SPEED_10000) {
+ DP(NETIF_MSG_LINK, "Init XMAC to 10G x 1"
+ " port per path\n");
+ /* Set the number of ports on the Warp Core to 10G */
+ REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 3);
+ } else {
+ DP(NETIF_MSG_LINK, "Init XMAC to 20G x 2 ports"
+ " per path\n");
+ /* Set the number of ports on the Warp Core to 20G */
+ REG_WR(bp, MISC_REG_XMAC_PHY_PORT_MODE, 1);
+ }
+ }
+ /* Soft reset */
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+ MISC_REGISTERS_RESET_REG_2_XMAC_SOFT);
+ usleep_range(1000, 1000);
+
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
+ MISC_REGISTERS_RESET_REG_2_XMAC_SOFT);
+
+}
+
+static void bnx2x_xmac_disable(struct link_params *params)
+{
+ u8 port = params->port;
+ struct bnx2x *bp = params->bp;
+ u32 xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
+
+ if (REG_RD(bp, MISC_REG_RESET_REG_2) &
+ MISC_REGISTERS_RESET_REG_2_XMAC) {
+ DP(NETIF_MSG_LINK, "Disable XMAC on port %x\n", port);
+ REG_WR(bp, xmac_base + XMAC_REG_CTRL, 0);
+ usleep_range(1000, 1000);
+ bnx2x_set_xumac_nig(params, 0, 0);
+ REG_WR(bp, xmac_base + XMAC_REG_CTRL,
+ XMAC_CTRL_REG_SOFT_RESET);
+ }
+}
+
+static int bnx2x_xmac_enable(struct link_params *params,
+ struct link_vars *vars, u8 lb)
+{
+ u32 val, xmac_base;
+ struct bnx2x *bp = params->bp;
+ DP(NETIF_MSG_LINK, "enabling XMAC\n");
+
+ xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
+
+ bnx2x_xmac_init(bp, vars->line_speed);
+
+ /*
+ * This register determines on which events the MAC will assert
+ * error on the i/f to the NIG along w/ EOP.
+ */
+
+ /*
+ * This register tells the NIG whether to send traffic to UMAC
+ * or XMAC
+ */
+ REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + params->port*4, 0);
+
+ /* Set Max packet size */
+ REG_WR(bp, xmac_base + XMAC_REG_RX_MAX_SIZE, 0x2710);
+
+ /* CRC append for Tx packets */
+ REG_WR(bp, xmac_base + XMAC_REG_TX_CTRL, 0xC800);
+
+ /* update PFC */
+ bnx2x_update_pfc_xmac(params, vars, 0);
+
+ /* Enable TX and RX */
+ val = XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN;
+
+ /* Check loopback mode */
+ if (lb)
+ val |= XMAC_CTRL_REG_CORE_LOCAL_LPBK;
+ REG_WR(bp, xmac_base + XMAC_REG_CTRL, val);
+ bnx2x_set_xumac_nig(params,
+ ((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1);
+
+ vars->mac_type = MAC_TYPE_XMAC;
+
+ return 0;
+}
static int bnx2x_emac_enable(struct link_params *params,
struct link_vars *vars, u8 lb)
{
@@ -785,95 +1138,341 @@
REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_BMAC_CONTROL, wb_data, 2);
}
-static void bnx2x_update_pfc_brb(struct link_params *params,
- struct link_vars *vars,
- struct bnx2x_nig_brb_pfc_port_params *pfc_params)
+
+/* PFC BRB internal port configuration params */
+struct bnx2x_pfc_brb_threshold_val {
+ u32 pause_xoff;
+ u32 pause_xon;
+ u32 full_xoff;
+ u32 full_xon;
+};
+
+struct bnx2x_pfc_brb_e3b0_val {
+ u32 full_lb_xoff_th;
+ u32 full_lb_xon_threshold;
+ u32 lb_guarantied;
+ u32 mac_0_class_t_guarantied;
+ u32 mac_0_class_t_guarantied_hyst;
+ u32 mac_1_class_t_guarantied;
+ u32 mac_1_class_t_guarantied_hyst;
+};
+
+struct bnx2x_pfc_brb_th_val {
+ struct bnx2x_pfc_brb_threshold_val pauseable_th;
+ struct bnx2x_pfc_brb_threshold_val non_pauseable_th;
+};
+static int bnx2x_pfc_brb_get_config_params(
+ struct link_params *params,
+ struct bnx2x_pfc_brb_th_val *config_val)
{
struct bnx2x *bp = params->bp;
+ DP(NETIF_MSG_LINK, "Setting PFC BRB configuration\n");
+ if (CHIP_IS_E2(bp)) {
+ config_val->pauseable_th.pause_xoff =
+ PFC_E2_BRB_MAC_PAUSE_XOFF_THR_PAUSE;
+ config_val->pauseable_th.pause_xon =
+ PFC_E2_BRB_MAC_PAUSE_XON_THR_PAUSE;
+ config_val->pauseable_th.full_xoff =
+ PFC_E2_BRB_MAC_FULL_XOFF_THR_PAUSE;
+ config_val->pauseable_th.full_xon =
+ PFC_E2_BRB_MAC_FULL_XON_THR_PAUSE;
+ /* non pause able*/
+ config_val->non_pauseable_th.pause_xoff =
+ PFC_E2_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE;
+ config_val->non_pauseable_th.pause_xon =
+ PFC_E2_BRB_MAC_PAUSE_XON_THR_NON_PAUSE;
+ config_val->non_pauseable_th.full_xoff =
+ PFC_E2_BRB_MAC_FULL_XOFF_THR_NON_PAUSE;
+ config_val->non_pauseable_th.full_xon =
+ PFC_E2_BRB_MAC_FULL_XON_THR_NON_PAUSE;
+ } else if (CHIP_IS_E3A0(bp)) {
+ config_val->pauseable_th.pause_xoff =
+ PFC_E3A0_BRB_MAC_PAUSE_XOFF_THR_PAUSE;
+ config_val->pauseable_th.pause_xon =
+ PFC_E3A0_BRB_MAC_PAUSE_XON_THR_PAUSE;
+ config_val->pauseable_th.full_xoff =
+ PFC_E3A0_BRB_MAC_FULL_XOFF_THR_PAUSE;
+ config_val->pauseable_th.full_xon =
+ PFC_E3A0_BRB_MAC_FULL_XON_THR_PAUSE;
+ /* non pause able*/
+ config_val->non_pauseable_th.pause_xoff =
+ PFC_E3A0_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE;
+ config_val->non_pauseable_th.pause_xon =
+ PFC_E3A0_BRB_MAC_PAUSE_XON_THR_NON_PAUSE;
+ config_val->non_pauseable_th.full_xoff =
+ PFC_E3A0_BRB_MAC_FULL_XOFF_THR_NON_PAUSE;
+ config_val->non_pauseable_th.full_xon =
+ PFC_E3A0_BRB_MAC_FULL_XON_THR_NON_PAUSE;
+ } else if (CHIP_IS_E3B0(bp)) {
+ if (params->phy[INT_PHY].flags &
+ FLAGS_4_PORT_MODE) {
+ config_val->pauseable_th.pause_xoff =
+ PFC_E3B0_4P_BRB_MAC_PAUSE_XOFF_THR_PAUSE;
+ config_val->pauseable_th.pause_xon =
+ PFC_E3B0_4P_BRB_MAC_PAUSE_XON_THR_PAUSE;
+ config_val->pauseable_th.full_xoff =
+ PFC_E3B0_4P_BRB_MAC_FULL_XOFF_THR_PAUSE;
+ config_val->pauseable_th.full_xon =
+ PFC_E3B0_4P_BRB_MAC_FULL_XON_THR_PAUSE;
+ /* non pause able*/
+ config_val->non_pauseable_th.pause_xoff =
+ PFC_E3B0_4P_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE;
+ config_val->non_pauseable_th.pause_xon =
+ PFC_E3B0_4P_BRB_MAC_PAUSE_XON_THR_NON_PAUSE;
+ config_val->non_pauseable_th.full_xoff =
+ PFC_E3B0_4P_BRB_MAC_FULL_XOFF_THR_NON_PAUSE;
+ config_val->non_pauseable_th.full_xon =
+ PFC_E3B0_4P_BRB_MAC_FULL_XON_THR_NON_PAUSE;
+ } else {
+ config_val->pauseable_th.pause_xoff =
+ PFC_E3B0_2P_BRB_MAC_PAUSE_XOFF_THR_PAUSE;
+ config_val->pauseable_th.pause_xon =
+ PFC_E3B0_2P_BRB_MAC_PAUSE_XON_THR_PAUSE;
+ config_val->pauseable_th.full_xoff =
+ PFC_E3B0_2P_BRB_MAC_FULL_XOFF_THR_PAUSE;
+ config_val->pauseable_th.full_xon =
+ PFC_E3B0_2P_BRB_MAC_FULL_XON_THR_PAUSE;
+ /* non pause able*/
+ config_val->non_pauseable_th.pause_xoff =
+ PFC_E3B0_2P_BRB_MAC_PAUSE_XOFF_THR_NON_PAUSE;
+ config_val->non_pauseable_th.pause_xon =
+ PFC_E3B0_2P_BRB_MAC_PAUSE_XON_THR_NON_PAUSE;
+ config_val->non_pauseable_th.full_xoff =
+ PFC_E3B0_2P_BRB_MAC_FULL_XOFF_THR_NON_PAUSE;
+ config_val->non_pauseable_th.full_xon =
+ PFC_E3B0_2P_BRB_MAC_FULL_XON_THR_NON_PAUSE;
+ }
+ } else
+ return -EINVAL;
+
+ return 0;
+}
+
+
+static void bnx2x_pfc_brb_get_e3b0_config_params(struct link_params *params,
+ struct bnx2x_pfc_brb_e3b0_val
+ *e3b0_val,
+ u32 cos0_pauseable,
+ u32 cos1_pauseable)
+{
+ if (params->phy[INT_PHY].flags & FLAGS_4_PORT_MODE) {
+ e3b0_val->full_lb_xoff_th =
+ PFC_E3B0_4P_BRB_FULL_LB_XOFF_THR;
+ e3b0_val->full_lb_xon_threshold =
+ PFC_E3B0_4P_BRB_FULL_LB_XON_THR;
+ e3b0_val->lb_guarantied =
+ PFC_E3B0_4P_LB_GUART;
+ e3b0_val->mac_0_class_t_guarantied =
+ PFC_E3B0_4P_BRB_MAC_0_CLASS_T_GUART;
+ e3b0_val->mac_0_class_t_guarantied_hyst =
+ PFC_E3B0_4P_BRB_MAC_0_CLASS_T_GUART_HYST;
+ e3b0_val->mac_1_class_t_guarantied =
+ PFC_E3B0_4P_BRB_MAC_1_CLASS_T_GUART;
+ e3b0_val->mac_1_class_t_guarantied_hyst =
+ PFC_E3B0_4P_BRB_MAC_1_CLASS_T_GUART_HYST;
+ } else {
+ e3b0_val->full_lb_xoff_th =
+ PFC_E3B0_2P_BRB_FULL_LB_XOFF_THR;
+ e3b0_val->full_lb_xon_threshold =
+ PFC_E3B0_2P_BRB_FULL_LB_XON_THR;
+ e3b0_val->mac_0_class_t_guarantied_hyst =
+ PFC_E3B0_2P_BRB_MAC_0_CLASS_T_GUART_HYST;
+ e3b0_val->mac_1_class_t_guarantied =
+ PFC_E3B0_2P_BRB_MAC_1_CLASS_T_GUART;
+ e3b0_val->mac_1_class_t_guarantied_hyst =
+ PFC_E3B0_2P_BRB_MAC_1_CLASS_T_GUART_HYST;
+
+ if (cos0_pauseable != cos1_pauseable) {
+ /* nonpauseable= Lossy + pauseable = Lossless*/
+ e3b0_val->lb_guarantied =
+ PFC_E3B0_2P_MIX_PAUSE_LB_GUART;
+ e3b0_val->mac_0_class_t_guarantied =
+ PFC_E3B0_2P_MIX_PAUSE_MAC_0_CLASS_T_GUART;
+ } else if (cos0_pauseable) {
+ /* Lossless +Lossless*/
+ e3b0_val->lb_guarantied =
+ PFC_E3B0_2P_PAUSE_LB_GUART;
+ e3b0_val->mac_0_class_t_guarantied =
+ PFC_E3B0_2P_PAUSE_MAC_0_CLASS_T_GUART;
+ } else {
+ /* Lossy +Lossy*/
+ e3b0_val->lb_guarantied =
+ PFC_E3B0_2P_NON_PAUSE_LB_GUART;
+ e3b0_val->mac_0_class_t_guarantied =
+ PFC_E3B0_2P_NON_PAUSE_MAC_0_CLASS_T_GUART;
+ }
+ }
+}
+static int bnx2x_update_pfc_brb(struct link_params *params,
+ struct link_vars *vars,
+ struct bnx2x_nig_brb_pfc_port_params
+ *pfc_params)
+{
+ struct bnx2x *bp = params->bp;
+ struct bnx2x_pfc_brb_th_val config_val = { {0} };
+ struct bnx2x_pfc_brb_threshold_val *reg_th_config =
+ &config_val.pauseable_th;
+ struct bnx2x_pfc_brb_e3b0_val e3b0_val = {0};
int set_pfc = params->feature_config_flags &
FEATURE_CONFIG_PFC_ENABLED;
+ int bnx2x_status = 0;
+ u8 port = params->port;
/* default - pause configuration */
- u32 pause_xoff_th = PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_PAUSEABLE;
- u32 pause_xon_th = PFC_BRB_MAC_PAUSE_XON_THRESHOLD_PAUSEABLE;
- u32 full_xoff_th = PFC_BRB_MAC_FULL_XOFF_THRESHOLD_PAUSEABLE;
- u32 full_xon_th = PFC_BRB_MAC_FULL_XON_THRESHOLD_PAUSEABLE;
+ reg_th_config = &config_val.pauseable_th;
+ bnx2x_status = bnx2x_pfc_brb_get_config_params(params, &config_val);
+ if (0 != bnx2x_status)
+ return bnx2x_status;
if (set_pfc && pfc_params)
/* First COS */
- if (!pfc_params->cos0_pauseable) {
- pause_xoff_th =
- PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_NON_PAUSEABLE;
- pause_xon_th =
- PFC_BRB_MAC_PAUSE_XON_THRESHOLD_NON_PAUSEABLE;
- full_xoff_th =
- PFC_BRB_MAC_FULL_XOFF_THRESHOLD_NON_PAUSEABLE;
- full_xon_th =
- PFC_BRB_MAC_FULL_XON_THRESHOLD_NON_PAUSEABLE;
- }
+ if (!pfc_params->cos0_pauseable)
+ reg_th_config = &config_val.non_pauseable_th;
/*
* The number of free blocks below which the pause signal to class 0
* of MAC #n is asserted. n=0,1
*/
- REG_WR(bp, BRB1_REG_PAUSE_0_XOFF_THRESHOLD_0 , pause_xoff_th);
+ REG_WR(bp, (port) ? BRB1_REG_PAUSE_0_XOFF_THRESHOLD_1 :
+ BRB1_REG_PAUSE_0_XOFF_THRESHOLD_0 ,
+ reg_th_config->pause_xoff);
/*
* The number of free blocks above which the pause signal to class 0
* of MAC #n is de-asserted. n=0,1
*/
- REG_WR(bp, BRB1_REG_PAUSE_0_XON_THRESHOLD_0 , pause_xon_th);
+ REG_WR(bp, (port) ? BRB1_REG_PAUSE_0_XON_THRESHOLD_1 :
+ BRB1_REG_PAUSE_0_XON_THRESHOLD_0 , reg_th_config->pause_xon);
/*
* The number of free blocks below which the full signal to class 0
* of MAC #n is asserted. n=0,1
*/
- REG_WR(bp, BRB1_REG_FULL_0_XOFF_THRESHOLD_0 , full_xoff_th);
+ REG_WR(bp, (port) ? BRB1_REG_FULL_0_XOFF_THRESHOLD_1 :
+ BRB1_REG_FULL_0_XOFF_THRESHOLD_0 , reg_th_config->full_xoff);
/*
* The number of free blocks above which the full signal to class 0
* of MAC #n is de-asserted. n=0,1
*/
- REG_WR(bp, BRB1_REG_FULL_0_XON_THRESHOLD_0 , full_xon_th);
+ REG_WR(bp, (port) ? BRB1_REG_FULL_0_XON_THRESHOLD_1 :
+ BRB1_REG_FULL_0_XON_THRESHOLD_0 , reg_th_config->full_xon);
if (set_pfc && pfc_params) {
/* Second COS */
- if (pfc_params->cos1_pauseable) {
- pause_xoff_th =
- PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_PAUSEABLE;
- pause_xon_th =
- PFC_BRB_MAC_PAUSE_XON_THRESHOLD_PAUSEABLE;
- full_xoff_th =
- PFC_BRB_MAC_FULL_XOFF_THRESHOLD_PAUSEABLE;
- full_xon_th =
- PFC_BRB_MAC_FULL_XON_THRESHOLD_PAUSEABLE;
- } else {
- pause_xoff_th =
- PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_NON_PAUSEABLE;
- pause_xon_th =
- PFC_BRB_MAC_PAUSE_XON_THRESHOLD_NON_PAUSEABLE;
- full_xoff_th =
- PFC_BRB_MAC_FULL_XOFF_THRESHOLD_NON_PAUSEABLE;
- full_xon_th =
- PFC_BRB_MAC_FULL_XON_THRESHOLD_NON_PAUSEABLE;
- }
+ if (pfc_params->cos1_pauseable)
+ reg_th_config = &config_val.pauseable_th;
+ else
+ reg_th_config = &config_val.non_pauseable_th;
/*
* The number of free blocks below which the pause signal to
* class 1 of MAC #n is asserted. n=0,1
- */
- REG_WR(bp, BRB1_REG_PAUSE_1_XOFF_THRESHOLD_0, pause_xoff_th);
+ **/
+ REG_WR(bp, (port) ? BRB1_REG_PAUSE_1_XOFF_THRESHOLD_1 :
+ BRB1_REG_PAUSE_1_XOFF_THRESHOLD_0,
+ reg_th_config->pause_xoff);
/*
* The number of free blocks above which the pause signal to
* class 1 of MAC #n is de-asserted. n=0,1
*/
- REG_WR(bp, BRB1_REG_PAUSE_1_XON_THRESHOLD_0, pause_xon_th);
+ REG_WR(bp, (port) ? BRB1_REG_PAUSE_1_XON_THRESHOLD_1 :
+ BRB1_REG_PAUSE_1_XON_THRESHOLD_0,
+ reg_th_config->pause_xon);
/*
* The number of free blocks below which the full signal to
* class 1 of MAC #n is asserted. n=0,1
*/
- REG_WR(bp, BRB1_REG_FULL_1_XOFF_THRESHOLD_0, full_xoff_th);
+ REG_WR(bp, (port) ? BRB1_REG_FULL_1_XOFF_THRESHOLD_1 :
+ BRB1_REG_FULL_1_XOFF_THRESHOLD_0,
+ reg_th_config->full_xoff);
/*
* The number of free blocks above which the full signal to
* class 1 of MAC #n is de-asserted. n=0,1
*/
- REG_WR(bp, BRB1_REG_FULL_1_XON_THRESHOLD_0, full_xon_th);
+ REG_WR(bp, (port) ? BRB1_REG_FULL_1_XON_THRESHOLD_1 :
+ BRB1_REG_FULL_1_XON_THRESHOLD_0,
+ reg_th_config->full_xon);
+
+
+ if (CHIP_IS_E3B0(bp)) {
+ /*Should be done by init tool */
+ /*
+ * BRB_empty_for_dup = BRB1_REG_BRB_EMPTY_THRESHOLD
+ * reset value
+ * 944
+ */
+
+ /**
+ * The hysteresis on the guarantied buffer space for the Lb port
+ * before signaling XON.
+ **/
+ REG_WR(bp, BRB1_REG_LB_GUARANTIED_HYST, 80);
+
+ bnx2x_pfc_brb_get_e3b0_config_params(
+ params,
+ &e3b0_val,
+ pfc_params->cos0_pauseable,
+ pfc_params->cos1_pauseable);
+ /**
+ * The number of free blocks below which the full signal to the
+ * LB port is asserted.
+ */
+ REG_WR(bp, BRB1_REG_FULL_LB_XOFF_THRESHOLD,
+ e3b0_val.full_lb_xoff_th);
+ /**
+ * The number of free blocks above which the full signal to the
+ * LB port is de-asserted.
+ */
+ REG_WR(bp, BRB1_REG_FULL_LB_XON_THRESHOLD,
+ e3b0_val.full_lb_xon_threshold);
+ /**
+ * The number of blocks guarantied for the MAC #n port. n=0,1
+ */
+
+ /*The number of blocks guarantied for the LB port.*/
+ REG_WR(bp, BRB1_REG_LB_GUARANTIED,
+ e3b0_val.lb_guarantied);
+
+ /**
+ * The number of blocks guarantied for the MAC #n port.
+ */
+ REG_WR(bp, BRB1_REG_MAC_GUARANTIED_0,
+ 2 * e3b0_val.mac_0_class_t_guarantied);
+ REG_WR(bp, BRB1_REG_MAC_GUARANTIED_1,
+ 2 * e3b0_val.mac_1_class_t_guarantied);
+ /**
+ * The number of blocks guarantied for class #t in MAC0. t=0,1
+ */
+ REG_WR(bp, BRB1_REG_MAC_0_CLASS_0_GUARANTIED,
+ e3b0_val.mac_0_class_t_guarantied);
+ REG_WR(bp, BRB1_REG_MAC_0_CLASS_1_GUARANTIED,
+ e3b0_val.mac_0_class_t_guarantied);
+ /**
+ * The hysteresis on the guarantied buffer space for class in
+ * MAC0. t=0,1
+ */
+ REG_WR(bp, BRB1_REG_MAC_0_CLASS_0_GUARANTIED_HYST,
+ e3b0_val.mac_0_class_t_guarantied_hyst);
+ REG_WR(bp, BRB1_REG_MAC_0_CLASS_1_GUARANTIED_HYST,
+ e3b0_val.mac_0_class_t_guarantied_hyst);
+
+ /**
+ * The number of blocks guarantied for class #t in MAC1.t=0,1
+ */
+ REG_WR(bp, BRB1_REG_MAC_1_CLASS_0_GUARANTIED,
+ e3b0_val.mac_1_class_t_guarantied);
+ REG_WR(bp, BRB1_REG_MAC_1_CLASS_1_GUARANTIED,
+ e3b0_val.mac_1_class_t_guarantied);
+ /**
+ * The hysteresis on the guarantied buffer space for class #t
+ * in MAC1. t=0,1
+ */
+ REG_WR(bp, BRB1_REG_MAC_1_CLASS_0_GUARANTIED_HYST,
+ e3b0_val.mac_1_class_t_guarantied_hyst);
+ REG_WR(bp, BRB1_REG_MAC_1_CLASS_1_GUARANTIED_HYST,
+ e3b0_val.mac_1_class_t_guarantied_hyst);
+
+ }
+
}
+
+ return bnx2x_status;
}
/******************************************************************************
@@ -931,9 +1530,9 @@
u32 xcm_mask = 0, ppp_enable = 0, pause_enable = 0, llfc_out_en = 0;
u32 llfc_enable = 0, xcm0_out_en = 0, p0_hwpfc_enable = 0;
u32 pkt_priority_to_cos = 0;
- u32 val;
struct bnx2x *bp = params->bp;
- int port = params->port;
+ u8 port = params->port;
+
int set_pfc = params->feature_config_flags &
FEATURE_CONFIG_PFC_ENABLED;
DP(NETIF_MSG_LINK, "updating pfc nig parameters\n");
@@ -954,6 +1553,9 @@
pause_enable = 0;
llfc_out_en = 0;
llfc_enable = 0;
+ if (CHIP_IS_E3(bp))
+ ppp_enable = 0;
+ else
ppp_enable = 1;
xcm_mask &= ~(port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN :
NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN);
@@ -972,6 +1574,9 @@
xcm0_out_en = 1;
}
+ if (CHIP_IS_E3(bp))
+ REG_WR(bp, port ? NIG_REG_BRB1_PAUSE_IN_EN :
+ NIG_REG_BRB0_PAUSE_IN_EN, pause_enable);
REG_WR(bp, port ? NIG_REG_LLFC_OUT_EN_1 :
NIG_REG_LLFC_OUT_EN_0, llfc_out_en);
REG_WR(bp, port ? NIG_REG_LLFC_ENABLE_1 :
@@ -993,20 +1598,6 @@
/* HW PFC TX enable */
REG_WR(bp, NIG_REG_P0_HWPFC_ENABLE, p0_hwpfc_enable);
- /* 0x2 = BMAC, 0x1= EMAC */
- switch (vars->mac_type) {
- case MAC_TYPE_EMAC:
- val = 1;
- break;
- case MAC_TYPE_BMAC:
- val = 0;
- break;
- default:
- val = 0;
- break;
- }
- REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT, val);
-
if (nig_params) {
u8 i = 0;
pkt_priority_to_cos = nig_params->pkt_priority_to_cos;
@@ -1028,8 +1619,7 @@
pkt_priority_to_cos);
}
-
-void bnx2x_update_pfc(struct link_params *params,
+int bnx2x_update_pfc(struct link_params *params,
struct link_vars *vars,
struct bnx2x_nig_brb_pfc_port_params *pfc_params)
{
@@ -1040,38 +1630,48 @@
*/
u32 val;
struct bnx2x *bp = params->bp;
-
+ int bnx2x_status = 0;
+ u8 bmac_loopback = (params->loopback_mode == LOOPBACK_BMAC);
/* update NIG params */
bnx2x_update_pfc_nig(params, vars, pfc_params);
/* update BRB params */
- bnx2x_update_pfc_brb(params, vars, pfc_params);
+ bnx2x_status = bnx2x_update_pfc_brb(params, vars, pfc_params);
+ if (0 != bnx2x_status)
+ return bnx2x_status;
if (!vars->link_up)
- return;
-
- val = REG_RD(bp, MISC_REG_RESET_REG_2);
- if ((val & (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))
- == 0) {
- DP(NETIF_MSG_LINK, "About to update PFC in EMAC\n");
- bnx2x_emac_enable(params, vars, 0);
- return;
- }
+ return bnx2x_status;
DP(NETIF_MSG_LINK, "About to update PFC in BMAC\n");
- if (CHIP_IS_E2(bp))
- bnx2x_update_pfc_bmac2(params, vars, 0);
- else
- bnx2x_update_pfc_bmac1(params, vars);
+ if (CHIP_IS_E3(bp))
+ bnx2x_update_pfc_xmac(params, vars, 0);
+ else {
+ val = REG_RD(bp, MISC_REG_RESET_REG_2);
+ if ((val &
+ (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))
+ == 0) {
+ DP(NETIF_MSG_LINK, "About to update PFC in EMAC\n");
+ bnx2x_emac_enable(params, vars, 0);
+ return bnx2x_status;
+ }
- val = 0;
- if ((params->feature_config_flags &
- FEATURE_CONFIG_PFC_ENABLED) ||
- (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX))
- val = 1;
- REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + params->port*4, val);
+ if (CHIP_IS_E2(bp))
+ bnx2x_update_pfc_bmac2(params, vars, bmac_loopback);
+ else
+ bnx2x_update_pfc_bmac1(params, vars);
+
+ val = 0;
+ if ((params->feature_config_flags &
+ FEATURE_CONFIG_PFC_ENABLED) ||
+ (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX))
+ val = 1;
+ REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + params->port*4, val);
+ }
+ return bnx2x_status;
}
+
static int bnx2x_bmac1_enable(struct link_params *params,
struct link_vars *vars,
u8 is_lb)
@@ -1819,7 +2419,7 @@
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
- u8 link_10g;
+ u8 link_10g_plus;
u8 port = params->port;
u32 sync_offset, media_types;
/* Update PHY configuration */
@@ -1893,17 +2493,19 @@
}
/* anything 10 and over uses the bmac */
- link_10g = ((vars->line_speed == SPEED_10000) ||
- (vars->line_speed == SPEED_12000) ||
- (vars->line_speed == SPEED_12500) ||
- (vars->line_speed == SPEED_13000) ||
- (vars->line_speed == SPEED_15000) ||
- (vars->line_speed == SPEED_16000));
- if (link_10g)
+ link_10g_plus = (vars->line_speed >= SPEED_10000);
+
+ if (link_10g_plus) {
+ if (USES_WARPCORE(bp))
+ vars->mac_type = MAC_TYPE_XMAC;
+ else
vars->mac_type = MAC_TYPE_BMAC;
+ } else {
+ if (USES_WARPCORE(bp))
+ vars->mac_type = MAC_TYPE_UMAC;
else
vars->mac_type = MAC_TYPE_EMAC;
-
+ }
} else { /* link down */
DP(NETIF_MSG_LINK, "phy link down\n");
@@ -3507,14 +4109,21 @@
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
/* disable emac */
- REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
+ if (!CHIP_IS_E3(bp))
+ REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
msleep(10);
-
- /* reset BigMac */
- bnx2x_bmac_rx_disable(bp, params->port);
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+ /* reset BigMac/Xmac */
+ if (CHIP_IS_E1x(bp) ||
+ CHIP_IS_E2(bp)) {
+ bnx2x_bmac_rx_disable(bp, params->port);
+ REG_WR(bp, GRCBASE_MISC +
+ MISC_REGISTERS_RESET_REG_2_CLEAR,
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+ }
+ if (CHIP_IS_E3(bp))
+ bnx2x_xmac_disable(params);
+
return 0;
}
@@ -3535,25 +4144,36 @@
if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
vars->link_status |=
LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
-
- if (link_10g) {
- bnx2x_bmac_enable(params, vars, 0);
+ if (USES_WARPCORE(bp)) {
+ if (link_10g)
+ bnx2x_xmac_enable(params, vars, 0);
+ else
+ bnx2x_umac_enable(params, vars, 0);
bnx2x_set_led(params, vars,
- LED_MODE_OPER, SPEED_10000);
- } else {
- rc = bnx2x_emac_program(params, vars);
+ LED_MODE_OPER, vars->line_speed);
+ }
+ if ((CHIP_IS_E1x(bp) ||
+ CHIP_IS_E2(bp))) {
+ if (link_10g) {
+ bnx2x_bmac_enable(params, vars, 0);
- bnx2x_emac_enable(params, vars, 0);
+ bnx2x_set_led(params, vars,
+ LED_MODE_OPER, SPEED_10000);
+ } else {
+ rc = bnx2x_emac_program(params, vars);
+ bnx2x_emac_enable(params, vars, 0);
- /* AN complete? */
- if ((vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE)
- && (!(vars->phy_flags & PHY_SGMII_FLAG)) &&
- SINGLE_MEDIA_DIRECT(params))
- bnx2x_set_gmii_tx_driver(params);
+ /* AN complete? */
+ if ((vars->link_status &
+ LINK_STATUS_AUTO_NEGOTIATE_COMPLETE)
+ && (!(vars->phy_flags & PHY_SGMII_FLAG)) &&
+ SINGLE_MEDIA_DIRECT(params))
+ bnx2x_set_gmii_tx_driver(params);
+ }
}
/* PBF - link up */
- if (!(CHIP_IS_E2(bp)))
+ if (CHIP_IS_E1x(bp))
rc |= bnx2x_pbf_update(params, vars->flow_ctrl,
vars->line_speed);
@@ -3617,7 +4237,8 @@
REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
/* disable emac */
- REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
+ if (!CHIP_IS_E3(bp))
+ REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
/*
* Step 1:
@@ -7871,6 +8492,43 @@
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
}
+void bnx2x_init_xmac_loopback(struct link_params *params,
+ struct link_vars *vars)
+{
+ struct bnx2x *bp = params->bp;
+ vars->link_up = 1;
+ if (!params->req_line_speed[0])
+ vars->line_speed = SPEED_10000;
+ else
+ vars->line_speed = params->req_line_speed[0];
+ vars->duplex = DUPLEX_FULL;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+ vars->mac_type = MAC_TYPE_XMAC;
+ vars->phy_flags = PHY_XGXS_FLAG;
+ /*
+ * Set WC to loopback mode since link is required to provide clock
+ * to the XMAC in 20G mode
+ */
+
+ bnx2x_xmac_enable(params, vars, 1);
+ REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
+}
+
+void bnx2x_init_umac_loopback(struct link_params *params,
+ struct link_vars *vars)
+{
+ struct bnx2x *bp = params->bp;
+ vars->link_up = 1;
+ vars->line_speed = SPEED_1000;
+ vars->duplex = DUPLEX_FULL;
+ vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+ vars->mac_type = MAC_TYPE_UMAC;
+ vars->phy_flags = PHY_XGXS_FLAG;
+ bnx2x_umac_enable(params, vars, 1);
+
+ REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0);
+}
+
void bnx2x_init_xgxs_loopback(struct link_params *params,
struct link_vars *vars)
{
@@ -7883,17 +8541,23 @@
else
vars->line_speed = SPEED_10000;
-
- bnx2x_xgxs_deassert(params);
+ if (!USES_WARPCORE(bp))
+ bnx2x_xgxs_deassert(params);
bnx2x_link_initialize(params, vars);
if (params->req_line_speed[0] == SPEED_1000) {
- bnx2x_emac_program(params, vars);
- bnx2x_emac_enable(params, vars, 0);
-
- } else
- bnx2x_bmac_enable(params, vars, 0);
-
+ if (USES_WARPCORE(bp))
+ bnx2x_umac_enable(params, vars, 0);
+ else {
+ bnx2x_emac_program(params, vars);
+ bnx2x_emac_enable(params, vars, 0);
+ }
+ } else {
+ if (USES_WARPCORE(bp))
+ bnx2x_xmac_enable(params, vars, 0);
+ else
+ bnx2x_bmac_enable(params, vars, 0);
+ }
if (params->loopback_mode == LOOPBACK_XGXS) {
/* set 10G XGXS loopback */
@@ -7957,17 +8621,23 @@
case LOOPBACK_EMAC:
bnx2x_init_emac_loopback(params, vars);
break;
+ case LOOPBACK_XMAC:
+ bnx2x_init_xmac_loopback(params, vars);
+ break;
+ case LOOPBACK_UMAC:
+ bnx2x_init_umac_loopback(params, vars);
+ break;
case LOOPBACK_XGXS:
case LOOPBACK_EXT_PHY:
bnx2x_init_xgxs_loopback(params, vars);
break;
default:
- /* No loopback */
- if (params->switch_cfg == SWITCH_CFG_10G)
- bnx2x_xgxs_deassert(params);
- else
- bnx2x_serdes_deassert(bp, params->port);
-
+ if (!CHIP_IS_E3(bp)) {
+ if (params->switch_cfg == SWITCH_CFG_10G)
+ bnx2x_xgxs_deassert(params);
+ else
+ bnx2x_serdes_deassert(bp, params->port);
+ }
bnx2x_link_initialize(params, vars);
msleep(30);
bnx2x_link_int_enable(params);
@@ -7995,14 +8665,19 @@
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
/* disable nig egress interface */
- REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0);
- REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
+ if (!CHIP_IS_E3(bp)) {
+ REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0);
+ REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
+ }
/* Stop BigMac rx */
- bnx2x_bmac_rx_disable(bp, port);
-
+ if (!CHIP_IS_E3(bp))
+ bnx2x_bmac_rx_disable(bp, port);
+ else
+ bnx2x_xmac_disable(params);
/* disable emac */
- REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
+ if (!CHIP_IS_E3(bp))
+ REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
msleep(10);
/* The PHY reset is controlled by GPIO 1
@@ -8038,10 +8713,10 @@
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
/* disable nig ingress interface */
- REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0);
- REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0);
- REG_WR(bp, NIG_REG_BMAC0_OUT_EN + port*4, 0);
- REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0);
+ if (!CHIP_IS_E3(bp)) {
+ REG_WR(bp, NIG_REG_BMAC0_IN_EN + port*4, 0);
+ REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0);
+ }
vars->link_up = 0;
return 0;
}