empeg: Coding style
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 47ebdf5..a6ab5b5 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -11,36 +11,39 @@
* it under the terms of the GNU General Public License, as published by
* the Free Software Foundation, version 2.
*
- * See Documentation/usb/usb-serial.txt for more information on using this driver
- *
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
+ *
* (07/16/2001) gb
- * remove unused code in empeg_close() (thanks to Oliver Neukum for pointing this
- * out) and rewrote empeg_set_termios().
- *
+ * remove unused code in empeg_close() (thanks to Oliver Neukum for
+ * pointing this out) and rewrote empeg_set_termios().
+ *
* (05/30/2001) gkh
- * switched from using spinlock to a semaphore, which fixes lots of problems.
+ * switched from using spinlock to a semaphore, which fixes lots of
+ * problems.
*
* (04/08/2001) gb
* Identify version on module load.
- *
+ *
* (01/22/2001) gb
- * Added write_room() and chars_in_buffer() support.
- *
+ * Added write_room() and chars_in_buffer() support.
+ *
* (12/21/2000) gb
* Moved termio stuff inside the port->active check.
* Moved MOD_DEC_USE_COUNT to end of empeg_close().
- *
+ *
* (12/03/2000) gb
- * Added port->port.tty->ldisc.set_termios(port->port.tty, NULL) to empeg_open()
- * This notifies the tty driver that the termios have changed.
- *
+ * Added port->port.tty->ldisc.set_termios(port->port.tty, NULL) to
+ * empeg_open(). This notifies the tty driver that the termios have
+ * changed.
+ *
* (11/13/2000) gb
- * Moved tty->low_latency = 1 from empeg_read_bulk_callback() to empeg_open()
- * (It only needs to be set once - Doh!)
- *
+ * Moved tty->low_latency = 1 from empeg_read_bulk_callback() to
+ * empeg_open() (It only needs to be set once - Doh!)
+ *
* (11/11/2000) gb
* Updated to work with id_table structure.
- *
+ *
* (11/04/2000) gb
* Forked this from visor.c, and hacked it up to work with an
* Empeg ltd. empeg-car player. Constructive criticism welcomed.
@@ -48,7 +51,7 @@
* use of his code, and for his guidance, advice and patience. :)
* A 'Thank You' is in order for John Ripley of Empeg ltd for his
* advice, and patience too.
- *
+ *
*/
#include <linux/kernel.h>
@@ -60,7 +63,7 @@
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/spinlock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
@@ -77,27 +80,30 @@
#define EMPEG_PRODUCT_ID 0x0001
/* function prototypes for an empeg-car player */
-static int empeg_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static void empeg_close (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
-static int empeg_write (struct tty_struct *tty, struct usb_serial_port *port,
- const unsigned char *buf,
- int count);
-static int empeg_write_room (struct tty_struct *tty);
-static int empeg_chars_in_buffer (struct tty_struct *tty);
-static void empeg_throttle (struct tty_struct *tty);
-static void empeg_unthrottle (struct tty_struct *tty);
-static int empeg_startup (struct usb_serial *serial);
-static void empeg_shutdown (struct usb_serial *serial);
-static void empeg_set_termios (struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios);
-static void empeg_write_bulk_callback (struct urb *urb);
-static void empeg_read_bulk_callback (struct urb *urb);
+static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
+ struct file *filp);
+static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
+ struct file *filp);
+static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf,
+ int count);
+static int empeg_write_room(struct tty_struct *tty);
+static int empeg_chars_in_buffer(struct tty_struct *tty);
+static void empeg_throttle(struct tty_struct *tty);
+static void empeg_unthrottle(struct tty_struct *tty);
+static int empeg_startup(struct usb_serial *serial);
+static void empeg_shutdown(struct usb_serial *serial);
+static void empeg_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios);
+static void empeg_write_bulk_callback(struct urb *urb);
+static void empeg_read_bulk_callback(struct urb *urb);
static struct usb_device_id id_table [] = {
{ USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) },
{ } /* Terminating entry */
};
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
static struct usb_driver empeg_driver = {
.name = "empeg",
@@ -149,7 +155,7 @@
dbg("%s - port %d", __func__, port->number);
/* Force default termio settings */
- empeg_set_termios (tty, port, NULL) ;
+ empeg_set_termios(tty, port, NULL) ;
bytes_in = 0;
bytes_out = 0;
@@ -157,7 +163,7 @@
/* Start reading from the device */
usb_fill_bulk_urb(
port->read_urb,
- serial->dev,
+ serial->dev,
usb_rcvbulkpipe(serial->dev,
port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer,
@@ -168,14 +174,16 @@
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
- dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, result);
return result;
}
static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
- struct file * filp)
+ struct file *filp)
{
dbg("%s - port %d", __func__, port->number);
@@ -186,7 +194,8 @@
}
-static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count)
+static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count)
{
struct usb_serial *serial = port->serial;
struct urb *urb;
@@ -203,7 +212,7 @@
/* try to find a free urb in our list of them */
urb = NULL;
- spin_lock_irqsave (&write_urb_pool_lock, flags);
+ spin_lock_irqsave(&write_urb_pool_lock, flags);
for (i = 0; i < NUM_URBS; ++i) {
if (write_urb_pool[i]->status != -EINPROGRESS) {
@@ -212,7 +221,7 @@
}
}
- spin_unlock_irqrestore (&write_urb_pool_lock, flags);
+ spin_unlock_irqrestore(&write_urb_pool_lock, flags);
if (urb == NULL) {
dbg("%s - no more free urbs", __func__);
@@ -220,25 +229,27 @@
}
if (urb->transfer_buffer == NULL) {
- urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
+ urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
if (urb->transfer_buffer == NULL) {
- dev_err(&port->dev, "%s no more kernel memory...\n", __func__);
+ dev_err(&port->dev,
+ "%s no more kernel memory...\n",
+ __func__);
goto exit;
}
}
- transfer_size = min (count, URB_TRANSFER_BUFFER_SIZE);
+ transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
- memcpy (urb->transfer_buffer, current_position, transfer_size);
+ memcpy(urb->transfer_buffer, current_position, transfer_size);
usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, urb->transfer_buffer);
/* build up our urb */
- usb_fill_bulk_urb (
+ usb_fill_bulk_urb(
urb,
serial->dev,
usb_sndbulkpipe(serial->dev,
- port->bulk_out_endpointAddress),
+ port->bulk_out_endpointAddress),
urb->transfer_buffer,
transfer_size,
empeg_write_bulk_callback,
@@ -260,7 +271,7 @@
}
exit:
return bytes_sent;
-}
+}
static int empeg_write_room(struct tty_struct *tty)
@@ -272,14 +283,13 @@
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave (&write_urb_pool_lock, flags);
+ spin_lock_irqsave(&write_urb_pool_lock, flags);
/* tally up the number of bytes available */
for (i = 0; i < NUM_URBS; ++i) {
- if (write_urb_pool[i]->status != -EINPROGRESS) {
+ if (write_urb_pool[i]->status != -EINPROGRESS)
room += URB_TRANSFER_BUFFER_SIZE;
- }
- }
- spin_unlock_irqrestore (&write_urb_pool_lock, flags);
+ }
+ spin_unlock_irqrestore(&write_urb_pool_lock, flags);
dbg("%s - returns %d", __func__, room);
return room;
@@ -295,25 +305,21 @@
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave (&write_urb_pool_lock, flags);
+ spin_lock_irqsave(&write_urb_pool_lock, flags);
/* tally up the number of bytes waiting */
for (i = 0; i < NUM_URBS; ++i) {
- if (write_urb_pool[i]->status == -EINPROGRESS) {
+ if (write_urb_pool[i]->status == -EINPROGRESS)
chars += URB_TRANSFER_BUFFER_SIZE;
- }
}
- spin_unlock_irqrestore (&write_urb_pool_lock, flags);
-
+ spin_unlock_irqrestore(&write_urb_pool_lock, flags);
dbg("%s - returns %d", __func__, chars);
-
- return (chars);
-
+ return chars;
}
-static void empeg_write_bulk_callback (struct urb *urb)
+static void empeg_write_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
int status = urb->status;
@@ -330,7 +336,7 @@
}
-static void empeg_read_bulk_callback (struct urb *urb)
+static void empeg_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct tty_struct *tty;
@@ -346,8 +352,8 @@
return;
}
- usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
-
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ urb->actual_length, data);
tty = port->port.tty;
if (urb->actual_length) {
@@ -360,7 +366,7 @@
/* Continue trying to always read */
usb_fill_bulk_urb(
port->read_urb,
- port->serial->dev,
+ port->serial->dev,
usb_rcvbulkpipe(port->serial->dev,
port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer,
@@ -371,7 +377,9 @@
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
+ dev_err(&urb->dev->dev,
+ "%s - failed resubmitting read urb, error %d\n",
+ __func__, result);
return;
@@ -395,11 +403,13 @@
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, result);
}
-static int empeg_startup (struct usb_serial *serial)
+static int empeg_startup(struct usb_serial *serial)
{
int r;
@@ -411,7 +421,7 @@
return -ENODEV;
}
dbg("%s - reset config", __func__);
- r = usb_reset_configuration (serial->dev);
+ r = usb_reset_configuration(serial->dev);
/* continue on with initialization */
return r;
@@ -419,9 +429,9 @@
}
-static void empeg_shutdown (struct usb_serial *serial)
+static void empeg_shutdown(struct usb_serial *serial)
{
- dbg ("%s", __func__);
+ dbg("%s", __func__);
}
@@ -432,14 +442,14 @@
dbg("%s - port %d", __func__, port->number);
/*
- * The empeg-car player wants these particular tty settings.
- * You could, for example, change the baud rate, however the
- * player only supports 115200 (currently), so there is really
- * no point in support for changes to the tty settings.
- * (at least for now)
- *
- * The default requirements for this device are:
- */
+ * The empeg-car player wants these particular tty settings.
+ * You could, for example, change the baud rate, however the
+ * player only supports 115200 (currently), so there is really
+ * no point in support for changes to the tty settings.
+ * (at least for now)
+ *
+ * The default requirements for this device are:
+ */
termios->c_iflag
&= ~(IGNBRK /* disable ignore break */
| BRKINT /* disable break causes interrupt */
@@ -478,13 +488,13 @@
}
-static int __init empeg_init (void)
+static int __init empeg_init(void)
{
struct urb *urb;
int i, retval;
- /* create our write urb pool and transfer buffers */
- spin_lock_init (&write_urb_pool_lock);
+ /* create our write urb pool and transfer buffers */
+ spin_lock_init(&write_urb_pool_lock);
for (i = 0; i < NUM_URBS; ++i) {
urb = usb_alloc_urb(0, GFP_KERNEL);
write_urb_pool[i] = urb;
@@ -493,9 +503,10 @@
continue;
}
- urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
+ urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
+ GFP_KERNEL);
if (!urb->transfer_buffer) {
- err("%s - out of memory for urb buffers.",
+ err("%s - out of memory for urb buffers.",
__func__);
continue;
}
@@ -524,36 +535,36 @@
}
-static void __exit empeg_exit (void)
+static void __exit empeg_exit(void)
{
int i;
unsigned long flags;
usb_deregister(&empeg_driver);
- usb_serial_deregister (&empeg_device);
+ usb_serial_deregister(&empeg_device);
- spin_lock_irqsave (&write_urb_pool_lock, flags);
+ spin_lock_irqsave(&write_urb_pool_lock, flags);
for (i = 0; i < NUM_URBS; ++i) {
if (write_urb_pool[i]) {
- /* FIXME - uncomment the following usb_kill_urb call when
- * the host controllers get fixed to set urb->dev = NULL after
- * the urb is finished. Otherwise this call oopses. */
+ /* FIXME - uncomment the following usb_kill_urb call
+ * when the host controllers get fixed to set urb->dev
+ * = NULL after the urb is finished. Otherwise this
+ * call oopses. */
/* usb_kill_urb(write_urb_pool[i]); */
kfree(write_urb_pool[i]->transfer_buffer);
- usb_free_urb (write_urb_pool[i]);
+ usb_free_urb(write_urb_pool[i]);
}
}
-
- spin_unlock_irqrestore (&write_urb_pool_lock, flags);
+ spin_unlock_irqrestore(&write_urb_pool_lock, flags);
}
module_init(empeg_init);
module_exit(empeg_exit);
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);