diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7b8ff66..1a46496 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -251,6 +251,7 @@
   echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
   echo  '  Image         - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
   echo  '* xipImage      - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)'
+  echo  '  uImage        - U-Boot wrapped zImage'
   echo  '  bootpImage    - Combined zImage and initial RAM disk' 
   echo  '                  (supply initrd image via make variable INITRD=<path>)'
   echo  '  install       - Install uncompressed kernel'
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 97b7dc1..5382622 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -274,7 +274,7 @@
 int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
 {
 	dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
-		__FUNCTION__, dma_addr, size);
+		__func__, dma_addr, size);
 	return (dev->bus == &pci_bus_type) &&
 		((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
 }
@@ -289,7 +289,7 @@
  */
 int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
 {
-	dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask);
+	dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask);
 	if (mask >= PHYS_OFFSET + SZ_64M - 1)
 		return 0;
 
@@ -299,7 +299,7 @@
 int
 pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
 {
-	dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask);
+	dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask);
 	if (mask >= PHYS_OFFSET + SZ_64M - 1)
 		return 0;
 
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index c2345af..323c1de 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Mon Dec 17 20:04:38 2007
+# Linux kernel version: 2.6.25-rc3
+# Mon Mar  3 03:39:48 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -21,6 +21,7 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,17 +41,22 @@
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -64,17 +70,26 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -102,6 +117,8 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
 
 #
 # System Type
@@ -130,6 +147,7 @@
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -139,6 +157,7 @@
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
 
 #
 # TI OMAP Implementations
@@ -155,6 +174,7 @@
 # CONFIG_OMAP_MUX_DEBUG is not set
 CONFIG_OMAP_MUX_WARNINGS=y
 CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
@@ -266,6 +286,7 @@
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
+# CONFIG_ATAGS_PROC is not set
 
 #
 # CPU Frequency scaling
@@ -311,9 +332,10 @@
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -330,6 +352,7 @@
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -384,6 +407,7 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -421,11 +445,13 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -489,6 +515,7 @@
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -512,7 +539,6 @@
 CONFIG_SLHC=y
 # CONFIG_SLIP_SMART is not set
 # CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -616,12 +642,10 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TPS65010=y
@@ -649,6 +673,7 @@
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -676,6 +701,7 @@
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -683,6 +709,7 @@
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -705,6 +732,7 @@
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 
 #
 # Multimedia devices
@@ -802,10 +830,6 @@
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_NEW_LEDS is not set
@@ -826,12 +850,10 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -874,8 +896,10 @@
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -946,9 +970,6 @@
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -975,6 +996,7 @@
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -992,6 +1014,9 @@
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1006,12 +1031,14 @@
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 
 #
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
index d592a64..d4ca5e6 100644
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ b/arch/arm/configs/omap_osk_5912_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Mon Dec 17 21:12:45 2007
+# Linux kernel version: 2.6.25-rc3
+# Mon Mar  3 03:35:17 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -21,6 +21,7 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -39,17 +40,22 @@
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -63,17 +69,26 @@
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -101,6 +116,8 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
 
 #
 # System Type
@@ -129,6 +146,7 @@
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -138,6 +156,7 @@
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
 
 #
 # TI OMAP Implementations
@@ -154,6 +173,7 @@
 # CONFIG_OMAP_MUX_DEBUG is not set
 CONFIG_OMAP_MUX_WARNINGS=y
 CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
@@ -173,13 +193,13 @@
 #
 # OMAP Board Type
 #
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
+CONFIG_MACH_OMAP_INNOVATOR=y
+CONFIG_MACH_OMAP_H2=y
+CONFIG_MACH_OMAP_H3=y
 CONFIG_MACH_OMAP_OSK=y
 # CONFIG_OMAP_OSK_MISTRAL is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
+CONFIG_MACH_NOKIA770=y
+CONFIG_MACH_OMAP_GENERIC=y
 
 #
 # OMAP CPU Speed
@@ -275,6 +295,7 @@
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
+# CONFIG_ATAGS_PROC is not set
 
 #
 # CPU Frequency scaling
@@ -307,9 +328,10 @@
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -326,6 +348,7 @@
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -381,6 +404,7 @@
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -493,11 +517,13 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
 CONFIG_BLK_DEV_IDE=m
 
@@ -519,7 +545,6 @@
 #
 # CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -553,6 +578,7 @@
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -574,7 +600,6 @@
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -671,6 +696,7 @@
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
@@ -698,12 +724,10 @@
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TPS65010=y
@@ -731,6 +755,7 @@
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -758,6 +783,7 @@
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -765,6 +791,7 @@
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -780,6 +807,7 @@
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 
 #
 # Multimedia devices
@@ -865,10 +893,6 @@
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_NEW_LEDS is not set
@@ -889,12 +913,10 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -948,8 +970,10 @@
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1019,9 +1043,6 @@
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1045,7 +1066,51 @@
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 024a9cf..50f667f 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -11,6 +11,9 @@
  *
  */
 
+#define ATAG_CORE 0x54410001
+#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
+
 	.type	__switch_data, %object
 __switch_data:
 	.long	__mmap_switched
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 7898cbc..bff4c6e 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -29,9 +29,6 @@
 #define KERNEL_RAM_VADDR	(PAGE_OFFSET + TEXT_OFFSET)
 #define KERNEL_RAM_PADDR	(PHYS_OFFSET + TEXT_OFFSET)
 
-#define ATAG_CORE 0x54410001
-#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
-
 
 /*
  * swapper_pg_dir is the virtual address of the initial page table.
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index a22a98c..13e371a 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -431,6 +431,11 @@
 	return 0;
 }
 
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+	return 0;
+}
+
 static struct undef_hook kprobes_break_hook = {
 	.instr_mask	= 0xffffffff,
 	.instr_val	= KPROBE_BREAKPOINT_INSTRUCTION,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 38313ab..bf103b2 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -245,10 +245,7 @@
 
 static void at91_lcdc_power_control(int on)
 {
-	if (on)
-		at91_set_gpio_value(AT91_PIN_PD12, 0);	/* power up */
-	else
-		at91_set_gpio_value(AT91_PIN_PD12, 1);	/* power down */
+	at91_set_gpio_value(AT91_PIN_PA30, on);
 }
 
 /* Driver datas */
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index f629c2b..ee4964a 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -490,6 +490,11 @@
 
 /*--------------------------------------------------------------------------*/
 
+/* This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
 /*
  * Called from the processor-specific init to enable GPIO interrupt support.
  */
@@ -510,6 +515,8 @@
 		__raw_writel(~0, this->regbase + PIO_IDR);
 
 		for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
+			lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class);
+
 			/*
 			 * Can use the "simple" and not "edge" handler since it's
 			 * shorter, and the AIC handles interrupts sanely.
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 7f31816..45144ad 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -103,7 +103,7 @@
 h720x_gpio_handler(unsigned int mask, unsigned int irq,
                  struct irq_desc *desc)
 {
-	IRQDBG("%s irq: %d\n",__FUNCTION__,irq);
+	IRQDBG("%s irq: %d\n", __func__, irq);
 	desc = irq_desc + irq;
 	while (mask) {
 		if (mask & 1) {
@@ -123,7 +123,7 @@
 
 	mask = CPU_REG(GPIO_A_VIRT,GPIO_STAT);
 	irq = IRQ_CHAINED_GPIOA(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
 	h720x_gpio_handler(mask, irq, desc);
 }
 
@@ -133,7 +133,7 @@
 	unsigned int mask, irq;
 	mask = CPU_REG(GPIO_B_VIRT,GPIO_STAT);
 	irq = IRQ_CHAINED_GPIOB(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
 	h720x_gpio_handler(mask, irq, desc);
 }
 
@@ -144,7 +144,7 @@
 
 	mask = CPU_REG(GPIO_C_VIRT,GPIO_STAT);
 	irq = IRQ_CHAINED_GPIOC(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
 	h720x_gpio_handler(mask, irq, desc);
 }
 
@@ -155,7 +155,7 @@
 
 	mask = CPU_REG(GPIO_D_VIRT,GPIO_STAT);
 	irq = IRQ_CHAINED_GPIOD(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
 	h720x_gpio_handler(mask, irq, desc);
 }
 
@@ -167,7 +167,7 @@
 
 	mask = CPU_REG(GPIO_E_VIRT,GPIO_STAT);
 	irq = IRQ_CHAINED_GPIOE(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
 	h720x_gpio_handler(mask, irq, desc);
 }
 #endif
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
index bc6fb02..a59ff29 100644
--- a/arch/arm/mach-imx/dma.c
+++ b/arch/arm/mach-imx/dma.c
@@ -54,7 +54,7 @@
 
 	if (!imxdma->name) {
 		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __FUNCTION__, dma_ch);
+		       __func__, dma_ch);
 		return 0;
 	}
 
@@ -288,7 +288,7 @@
 
 	if (!imxdma->name) {
 		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __FUNCTION__, dma_ch);
+		       __func__, dma_ch);
 		return -ENODEV;
 	}
 
@@ -321,7 +321,7 @@
 
 	if (!imxdma->name) {
 		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __FUNCTION__, dma_ch);
+		       __func__, dma_ch);
 		return;
 	}
 
@@ -365,7 +365,7 @@
 
 	if (dma_ch >= IMX_DMA_CHANNELS) {
 		printk(KERN_CRIT "%s: called for  non-existed channel %d\n",
-		       __FUNCTION__, dma_ch);
+		       __func__, dma_ch);
 		return -EINVAL;
 	}
 
@@ -396,7 +396,7 @@
 	if (!imxdma->name) {
 		printk(KERN_CRIT
 		       "%s: trying to free channel %d which is already freed\n",
-		       __FUNCTION__, dma_ch);
+		       __func__, dma_ch);
 		return;
 	}
 
@@ -456,7 +456,7 @@
 		}
 	}
 
-	printk(KERN_ERR "%s: no free DMA channel found\n", __FUNCTION__);
+	printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
 
 	return -ENODEV;
 }
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index a7465db..e6695c4 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -160,21 +160,21 @@
 static void
 imx_gpio_ack_irq(unsigned int irq)
 {
-	DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq);
+	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
 	ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
 }
 
 static void
 imx_gpio_mask_irq(unsigned int irq)
 {
-	DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq);
+	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
 	IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32));
 }
 
 static void
 imx_gpio_unmask_irq(unsigned int irq)
 {
-	DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq);
+	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
 	IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
 }
 
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 268a8d8..77b24cd 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -81,7 +81,7 @@
 static void __init iq81340mc_timer_init(void)
 {
 	unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio();
-	printk(KERN_DEBUG "%s: bus frequency: %lu\n", __FUNCTION__, bus_freq);
+	printk(KERN_DEBUG "%s: bus frequency: %lu\n", __func__, bus_freq);
 	iop_init_time(bus_freq);
 }
 
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index a51ffd2..e8522b3 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -83,7 +83,7 @@
 static void __init iq81340sc_timer_init(void)
 {
 	unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio();
-	printk(KERN_DEBUG "%s: bus frequency: %lu\n", __FUNCTION__, bus_freq);
+	printk(KERN_DEBUG "%s: bus frequency: %lu\n", __func__, bus_freq);
 	iop_init_time(bus_freq);
 }
 
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 99d94cb..7825c1a 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -94,13 +94,13 @@
 					, 0, iop13xx_atux_mem_size, MT_DEVICE);
 					if (!iop13xx_atux_mem_base) {
 						printk("%s: atux allocation "
-						       "failed\n", __FUNCTION__);
+						       "failed\n", __func__);
 						BUG();
 					}
 				} else
 					iop13xx_atux_mem_size = 0;
 				PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
-				__FUNCTION__, atu, iop13xx_atux_mem_size,
+				__func__, atu, iop13xx_atux_mem_size,
 				iop13xx_atux_mem_base);
 				break;
 			case 1:
@@ -120,13 +120,13 @@
 					, 0, iop13xx_atue_mem_size, MT_DEVICE);
 					if (!iop13xx_atue_mem_base) {
 						printk("%s: atue allocation "
-						       "failed\n", __FUNCTION__);
+						       "failed\n", __func__);
 						BUG();
 					}
 				} else
 					iop13xx_atue_mem_size = 0;
 				PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
-				__FUNCTION__, atu, iop13xx_atue_mem_size,
+				__func__, atu, iop13xx_atue_mem_size,
 				iop13xx_atue_mem_base);
 				break;
 			}
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index bfe0c87..246f6d4 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -519,7 +519,7 @@
 	if (iq8134x_flash_resource.end > iq8134x_flash_resource.start)
 		iop13xx_devices[plat_idx++] = &iq8134x_flash;
 	else
-		printk(KERN_ERR "%s: Failed to probe flash size\n", __FUNCTION__);
+		printk(KERN_ERR "%s: Failed to probe flash size\n", __func__);
 #endif
 
 	platform_add_devices(iop13xx_devices, plat_idx);
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index bf04121..64be341 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -87,7 +87,7 @@
 	if (isr & PCI_ISR_PFE) {
 		/* make sure the Master Abort bit is reset */    
 		*PCI_ISR = PCI_ISR_PFE;
-		pr_debug("%s failed\n", __FUNCTION__);
+		pr_debug("%s failed\n", __func__);
 		return 1;
 	}
 
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 0d5a424..49dec78 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -65,7 +65,7 @@
 	else
 		rc = gtwx5715_irqmap[slot][pin-1];
 
-	printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, rc);
+	printk("%s: Mapped slot %d pin %d to IRQ %d\n", __func__, slot, pin, rc);
 	return(rc);
 }
 
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index b9ca8f9..fd7537f 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -133,7 +133,7 @@
 	val &= ~((1 << 24) << irq);
 	writel(val, NETX_DPMAS_INT_EN);
 
-	DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq);
+	DEBUG_IRQ("%s: irq %d\n", __func__, _irq);
 }
 
 static void
@@ -145,7 +145,7 @@
 	val = readl(NETX_DPMAS_INT_EN);
 	val &= ~((1 << 24) << irq);
 	writel(val, NETX_DPMAS_INT_EN);
-	DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq);
+	DEBUG_IRQ("%s: irq %d\n", __func__, _irq);
 }
 
 static void
@@ -157,7 +157,7 @@
 	val = readl(NETX_DPMAS_INT_EN);
 	val |= (1 << 24) << irq;
 	writel(val, NETX_DPMAS_INT_EN);
-	DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq);
+	DEBUG_IRQ("%s: irq %d\n", __func__, _irq);
 }
 
 static struct irq_chip netx_hif_chip = {
diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c
index b223021..5286e9f 100644
--- a/arch/arm/mach-ns9xxx/gpio.c
+++ b/arch/arm/mach-ns9xxx/gpio.c
@@ -31,7 +31,7 @@
 static spinlock_t gpio_lock = __SPIN_LOCK_UNLOCKED(gpio_lock);
 
 /* only access gpiores with atomic ops */
-static DECLARE_BITMAP(gpiores, GPIO_MAX);
+static DECLARE_BITMAP(gpiores, GPIO_MAX + 1);
 
 static inline int ns9xxx_valid_gpio(unsigned gpio)
 {
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 070345e..5079877 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -350,6 +350,10 @@
 
 static struct i2c_board_info __initdata h2_i2c_board_info[] = {
 	{
+		I2C_BOARD_INFO("tps65010", 0x48),
+		.type           = "tps65010",
+		.irq            = OMAP_GPIO_IRQ(58),
+	}, {
 		I2C_BOARD_INFO("isp1301_omap", 0x2d),
 		.type		= "isp1301_omap",
 		.irq		= OMAP_GPIO_IRQ(2),
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 6fc5168..c3ef1ee 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -26,6 +26,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
+#include <linux/spi/spi.h>
 #include <linux/i2c/tps65010.h>
 
 #include <asm/setup.h>
@@ -51,6 +52,8 @@
 #include <asm/arch/mcbsp.h>
 #include <asm/arch/omap-alsa.h>
 
+#define H3_TS_GPIO	48
+
 static int h3_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -373,6 +376,17 @@
 	.id		= -1,
 };
 
+static struct spi_board_info h3_spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "tsc2101",
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.irq		= OMAP_GPIO_IRQ(H3_TS_GPIO),
+		.max_speed_hz	= 16000000,
+		/* .platform_data	= &tsc_platform_data, */
+	},
+};
+
 static struct omap_mcbsp_reg_cfg mcbsp_regs = {
 	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
 	.spcr1 = RINTM(3) | RRST,
@@ -457,6 +471,14 @@
 	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
 
+static struct i2c_board_info __initdata h3_i2c_board_info[] = {
+       {
+               I2C_BOARD_INFO("tps65010", 0x48),
+               .type           = "tps65013",
+               /* .irq         = OMAP_GPIO_IRQ(??), */
+       },
+};
+
 static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
 	{
 		.name			= "mmc_slot",
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 8eb5dcd..e6c64e1 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -717,7 +717,7 @@
 #endif
 
 #ifdef CONFIG_OMAP_32K_TIMER
-	error = sysfs_create_file(power_kobj, &sleep_while_idle_attr);
+	error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr);
 	if (error)
 		printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
 #endif
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5a4091f..69c8174 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -42,6 +42,12 @@
 		.length		= L3_24XX_SIZE,
 		.type		= MT_DEVICE
 	},
+	{
+		.virtual        = L4_24XX_VIRT,
+		.pfn            = __phys_to_pfn(L4_24XX_PHYS),
+		.length         = L4_24XX_SIZE,
+		.type           = MT_DEVICE
+	},
 #ifdef CONFIG_ARCH_OMAP2430
 	{
 		.virtual	= L4_WK_243X_VIRT,
diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c
index 2e2fd63..58cc3c0 100644
--- a/arch/arm/mach-orion/addr-map.c
+++ b/arch/arm/mach-orion/addr-map.c
@@ -97,14 +97,20 @@
 #define PCIE_BAR_CTRL(n)	ORION_PCIE_REG(0x1804 + ((n - 1) * 4))
 #define PCIE_BAR_LO(n)		ORION_PCIE_REG(0x0010 + ((n) * 8))
 #define PCIE_BAR_HI(n)		ORION_PCIE_REG(0x0014 + ((n) * 8))
-#define PCIE_WIN_CTRL(n)	ORION_PCIE_REG(0x1820 + ((n) << 4))
-#define PCIE_WIN_BASE(n)	ORION_PCIE_REG(0x1824 + ((n) << 4))
-#define PCIE_WIN_REMAP(n)	ORION_PCIE_REG(0x182c + ((n) << 4))
+#define PCIE_WIN_CTRL(n)	(((n) < 5) ? \
+					ORION_PCIE_REG(0x1820 + ((n) << 4)) : \
+					ORION_PCIE_REG(0x1880))
+#define PCIE_WIN_BASE(n)	(((n) < 5) ? \
+					ORION_PCIE_REG(0x1824 + ((n) << 4)) : \
+					ORION_PCIE_REG(0x1884))
+#define PCIE_WIN_REMAP(n)	(((n) < 5) ? \
+					ORION_PCIE_REG(0x182c + ((n) << 4)) : \
+					ORION_PCIE_REG(0x188c))
 #define PCIE_DEFWIN_CTRL	ORION_PCIE_REG(0x18b0)
 #define PCIE_EXPROM_WIN_CTRL	ORION_PCIE_REG(0x18c0)
 #define PCIE_EXPROM_WIN_REMP	ORION_PCIE_REG(0x18c4)
 #define PCIE_MAX_BARS		3
-#define PCIE_MAX_WINS		5
+#define PCIE_MAX_WINS		6
 
 /*
  * Use PCIE BAR '1' for all DDR banks
diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c
index 5f0ee4b..bbc2b4e 100644
--- a/arch/arm/mach-orion/common.c
+++ b/arch/arm/mach-orion/common.c
@@ -17,7 +17,9 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/mv643xx_i2c.h>
 #include <asm/page.h>
+#include <asm/setup.h>
 #include <asm/timex.h>
+#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/arch/hardware.h>
 #include "common.h"
@@ -177,8 +179,8 @@
 
 static struct resource orion_eth_shared_resources[] = {
 	{
-		.start	= ORION_ETH_PHYS_BASE,
-		.end	= ORION_ETH_PHYS_BASE + 0xffff,
+		.start	= ORION_ETH_PHYS_BASE + 0x2000,
+		.end	= ORION_ETH_PHYS_BASE + 0x3fff,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -347,3 +349,21 @@
 		platform_device_register(&orion_ehci1);
 	platform_device_register(&orion_i2c);
 }
+
+/*
+ * Many orion-based systems have buggy bootloader implementations.
+ * This is a common fixup for bogus memory tags.
+ */
+void __init tag_fixup_mem32(struct machine_desc *mdesc, struct tag *t,
+			    char **from, struct meminfo *meminfo)
+{
+	for (; t->hdr.size; t = tag_next(t))
+		if (t->hdr.tag == ATAG_MEM &&
+		    (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK ||
+		     t->u.mem.start & ~PAGE_MASK)) {
+			printk(KERN_WARNING
+			       "Clearing invalid memory bank %dKB@0x%08x\n",
+			       t->u.mem.size / 1024, t->u.mem.start);
+			t->hdr.tag = 0;
+		}
+}
diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h
index 10154ec8..501497c 100644
--- a/arch/arm/mach-orion/common.h
+++ b/arch/arm/mach-orion/common.h
@@ -83,4 +83,10 @@
 
 void __init orion_sata_init(struct mv_sata_platform_data *sata_data);
 
+struct machine_desc;
+struct meminfo;
+struct tag;
+extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *,
+				   char **, struct meminfo *);
+
 #endif /* __ARCH_ORION_COMMON_H__ */
diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion/dns323-setup.c
index 02b280c..076e155 100644
--- a/arch/arm/mach-orion/dns323-setup.c
+++ b/arch/arm/mach-orion/dns323-setup.c
@@ -319,4 +319,5 @@
 	.map_io		= orion_map_io,
 	.init_irq	= orion_init_irq,
 	.timer		= &orion_timer,
+	.fixup		= tag_fixup_mem32,
 MACHINE_END
diff --git a/arch/arm/mach-orion/gpio.c b/arch/arm/mach-orion/gpio.c
index d5f00c8..f713818c 100644
--- a/arch/arm/mach-orion/gpio.c
+++ b/arch/arm/mach-orion/gpio.c
@@ -36,7 +36,7 @@
 	unsigned long flags;
 
 	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return -EINVAL;
 	}
 
@@ -62,7 +62,7 @@
 	int mask;
 
 	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return -EINVAL;
 	}
 
@@ -141,7 +141,7 @@
 	unsigned long flags;
 
 	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return -EINVAL;
 	}
 
@@ -149,7 +149,7 @@
 
 	if (gpio_label[pin]) {
 		pr_debug("%s: GPIO %d already used as %s\n",
-			 __FUNCTION__, pin, gpio_label[pin]);
+			 __func__, pin, gpio_label[pin]);
 		ret = -EBUSY;
 	} else
 		gpio_label[pin] = label ? label : "?";
@@ -162,12 +162,12 @@
 void gpio_free(unsigned pin)
 {
 	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return;
 	}
 
 	if (!gpio_label[pin])
-		pr_warning("%s: GPIO %d already freed\n", __FUNCTION__, pin);
+		pr_warning("%s: GPIO %d already freed\n", __func__, pin);
 	else
 		gpio_label[pin] = NULL;
 }
diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c
index 6817aca..785a07bd 100644
--- a/arch/arm/mach-orion/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion/kurobox_pro-setup.c
@@ -240,4 +240,5 @@
 	.map_io		= orion_map_io,
 	.init_irq	= orion_init_irq,
 	.timer		= &orion_timer,
+	.fixup		= tag_fixup_mem32,
 MACHINE_END
diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c
index b8cfe68..45764da 100644
--- a/arch/arm/mach-orion/ts209-setup.c
+++ b/arch/arm/mach-orion/ts209-setup.c
@@ -357,4 +357,5 @@
 	.map_io		= orion_map_io,
 	.init_irq	= orion_init_irq,
 	.timer		= &orion_timer,
+	.fixup		= tag_fixup_mem32,
 MACHINE_END
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index daa8d3d..8e00ed4 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -976,7 +976,7 @@
 				(*clkp)->set_parent((*clkp), (*clkp)->parent);
 		}
 		pr_debug("%s: clock %s, rate %ld\n",
-			__FUNCTION__, (*clkp)->name, (*clkp)->rate);
+			__func__, (*clkp)->name, (*clkp)->rate);
 	}
 
 	local_clk_use(&ck_pll4);
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index f7009d8..fe152e8 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -192,7 +192,7 @@
 	if (!dma_channels[ch].name) {
 		printk(KERN_CRIT
 		       "%s: trying to free channel %d which is already freed\n",
-		       __FUNCTION__, ch);
+		       __func__, ch);
 		return;
 	}
 
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index 15c4e0d..fcda7d5 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -104,7 +104,7 @@
 {
 	int irq;
 
-	dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __FUNCTION__, slot, pin);
+	dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin);
 
 	irq = it8152_pci_map_irq(dev, slot, pin);
 	if (irq)
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 6012177..ecdbc96 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -504,11 +504,11 @@
 	struct pxamci_platform_data *p_d = dev->platform_data;
 
 	if ((1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
+		printk(KERN_DEBUG "%s: on\n", __func__);
 		GPCR(105) = GPIO_bit(105);
 	} else {
 		GPSR(105) = GPIO_bit(105);
-		printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
+		printk(KERN_DEBUG "%s: off\n", __func__);
 	}
 }
 
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 93c4f31..3215316 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -81,7 +81,7 @@
 	if (!dma_channels[dma_ch].name) {
 		printk (KERN_CRIT
 			"%s: trying to free channel %d which is already freed\n",
-			__FUNCTION__, dma_ch);
+			__func__, dma_ch);
 		return;
 	}
 
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 3d0ad50..3bb3131 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -264,7 +264,7 @@
 			  "MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
-		       __FUNCTION__, err);
+		       __func__, err);
 		return err;
 	}
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 345c3de..72a436f 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -390,11 +390,11 @@
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
 	if (( 1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
+		printk(KERN_DEBUG "%s: on\n", __func__);
 		MST_MSCWR1 |= MST_MSCWR1_MMC_ON;
 		MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
 	} else {
-		printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
+		printk(KERN_DEBUG "%s: off\n", __func__);
 		MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
 	}
 }
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 853fc94..f207fcd 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -217,7 +217,7 @@
 		ConXS_BCR = trizeps_conxs_bcr;
 
 	}
-	pr_debug("%s: o%s 0x%x\n", __FUNCTION__, power ? "n": "ff", trizeps_conxs_bcr);
+	pr_debug("%s: o%s 0x%x\n", __func__, power ? "n": "ff", trizeps_conxs_bcr);
 }
 
 /* backlight power switching for LCD panel */
@@ -228,7 +228,7 @@
 	} else {
 		trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
 	}
-	pr_debug("%s: o%s 0x%x\n", __FUNCTION__, on ? "n" : "ff", trizeps_conxs_bcr);
+	pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", trizeps_conxs_bcr);
 	ConXS_BCR = trizeps_conxs_bcr;
 }
 
@@ -238,10 +238,10 @@
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
 	if (( 1 << vdd) & p_d->ocr_mask) {
-		pr_debug("%s: on\n", __FUNCTION__);
+		pr_debug("%s: on\n", __func__);
 		/* FIXME fill in values here */
 	} else {
-		pr_debug("%s: off\n", __FUNCTION__);
+		pr_debug("%s: off\n", __func__);
 		/* FIXME fill in values here */
 	}
 }
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index f60b7a6..842d9e6 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -206,7 +206,7 @@
 	if (ret < 0)
 		printk(KERN_ERR
 		       "%s: SA-1111 initialization failed (%d)\n",
-		       __FUNCTION__, ret);
+		       __func__, ret);
 
 
 	/* maybe turn on 5v0 from the start */
@@ -240,11 +240,11 @@
 	/* detect on->off and off->on transitions */
 	if ((!old_5V_bitmap) && (badge4_5V_bitmap)) {
 		/* was off, now on */
-		printk(KERN_INFO "%s: enabling 5V supply rail\n", __FUNCTION__);
+		printk(KERN_INFO "%s: enabling 5V supply rail\n", __func__);
 		GPSR = BADGE4_GPIO_PCMEN5V;
 	} else if ((old_5V_bitmap) && (!badge4_5V_bitmap)) {
 		/* was on, now off */
-		printk(KERN_INFO "%s: disabling 5V supply rail\n", __FUNCTION__);
+		printk(KERN_INFO "%s: disabling 5V supply rail\n", __func__);
 		GPCR = BADGE4_GPIO_PCMEN5V;
 	}
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index d68630b..343368a 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -139,7 +139,7 @@
 
 	if (settings->speed == 0) {
 		panic("%s: couldn't find dram setting for speed %d\n",
-		      __FUNCTION__, new_speed);
+		      __func__, new_speed);
 	}
 
 	/* No risk, no fun: run with interrupts on! */
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index 1fbe053..e508028 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -129,7 +129,7 @@
 	if (err) {
 		printk(KERN_ERR
 		       "%s: unable to request IRQ %d for %s\n",
-		       __FUNCTION__, IRQ_DMA0 + i, device_id);
+		       __func__, IRQ_DMA0 + i, device_id);
 		dma->device = 0;
 		return err;
 	}
@@ -165,12 +165,12 @@
 		if (regs == (dma_regs_t *)&DDAR(i))
 			break;
 	if (i >= SA1100_DMA_CHANNELS) {
-		printk(KERN_ERR "%s: bad DMA identifier\n", __FUNCTION__);
+		printk(KERN_ERR "%s: bad DMA identifier\n", __func__);
 		return;
 	}
 
 	if (!dma_chan[i].device) {
-		printk(KERN_ERR "%s: Trying to free free DMA\n", __FUNCTION__);
+		printk(KERN_ERR "%s: Trying to free free DMA\n", __func__);
 		return;
 	}
 
@@ -329,7 +329,7 @@
 		if (regs == (dma_regs_t *)&DDAR(i))
 			break;
 	if (i >= SA1100_DMA_CHANNELS) {
-		printk(KERN_ERR "%s: bad DMA identifier\n", __FUNCTION__);
+		printk(KERN_ERR "%s: bad DMA identifier\n", __func__);
 		return;
 	}
 
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index b72fee0..8473c37 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -596,7 +596,7 @@
 	case IPAQ_EGPIO_CODEC_NRESET:
 	case IPAQ_EGPIO_AUDIO_ON:
 	case IPAQ_EGPIO_QMUTE:
-		printk("%s: error - should not be called\n", __FUNCTION__);
+		printk("%s: error - should not be called\n", __func__);
 		break;
 	case IPAQ_EGPIO_OPT_NVRAM_ON:
 		SET_ASIC2(GPIO2_OPT_ON_NVRAM);
@@ -638,7 +638,7 @@
 	static u16 asic2_data;
 	int result = 0;
 
-	printk("%s %d\n", __FUNCTION__, req);
+	printk("%s %d\n", __func__, req);
 
 	switch (req) {
 	case PM_RESUME:
@@ -666,7 +666,7 @@
 		asic2_data = H3800_ASIC2_GPIOPIOD;
 		break;
 	default:
-		printk("%s: unrecognized PM callback\n", __FUNCTION__);
+		printk("%s: unrecognized PM callback\n", __func__);
 		break;
 	}
 	return result;
@@ -706,7 +706,7 @@
 {
 	int i;
 
-	if (0) printk("%s: interrupt received\n", __FUNCTION__);
+	if (0) printk("%s: interrupt received\n", __func__);
 
 	desc->chip->ack(irq);
 
@@ -716,21 +716,21 @@
 
 		/* KPIO */
 		irq = H3800_ASIC2_KPIINTFLAG;
-		if (0) printk("%s KPIO 0x%08X\n", __FUNCTION__, irq);
+		if (0) printk("%s KPIO 0x%08X\n", __func__, irq);
 		for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
 			if (irq & kpio_irq_mask[j])
 				handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j);
 
 		/* GPIO2 */
 		irq = H3800_ASIC2_GPIINTFLAG;
-		if (0) printk("%s GPIO 0x%08X\n", __FUNCTION__, irq);
+		if (0) printk("%s GPIO 0x%08X\n", __func__, irq);
 		for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
 			if (irq & gpio_irq_mask[j])
 				handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j);
 	}
 
 	if (i >= MAX_ASIC_ISR_LOOPS)
-		printk("%s: interrupt processing overrun\n", __FUNCTION__);
+		printk("%s: interrupt processing overrun\n", __func__);
 
 	/* For level-based interrupts */
 	desc->chip->unmask(irq);
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index 2b5aa11..98d0151 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -371,7 +371,7 @@
 			default:
 				printk(KERN_DEBUG "\"%s\" malformed at "
 					    "character: \'%c\'",
-					    __FUNCTION__,
+					    __func__,
 					    *str);
 				*(str + 1) = '\0';
 			}
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index c0d63b0..d719c15 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -33,43 +33,33 @@
 #define MPU_CLK		"virt_prcm_set"
 #endif
 
+static struct clk *mpu_clk;
+
 /* TODO: Add support for SDRAM timing changes */
 
 int omap_verify_speed(struct cpufreq_policy *policy)
 {
-	struct clk * mpu_clk;
-
 	if (policy->cpu)
 		return -EINVAL;
 
 	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
 				     policy->cpuinfo.max_freq);
-	mpu_clk = clk_get(NULL, MPU_CLK);
-	if (IS_ERR(mpu_clk))
-		return PTR_ERR(mpu_clk);
+
 	policy->min = clk_round_rate(mpu_clk, policy->min * 1000) / 1000;
 	policy->max = clk_round_rate(mpu_clk, policy->max * 1000) / 1000;
 	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
 				     policy->cpuinfo.max_freq);
-	clk_put(mpu_clk);
-
 	return 0;
 }
 
 unsigned int omap_getspeed(unsigned int cpu)
 {
-	struct clk * mpu_clk;
 	unsigned long rate;
 
 	if (cpu)
 		return 0;
 
-	mpu_clk = clk_get(NULL, MPU_CLK);
-	if (IS_ERR(mpu_clk))
-		return 0;
 	rate = clk_get_rate(mpu_clk) / 1000;
-	clk_put(mpu_clk);
-
 	return rate;
 }
 
@@ -77,14 +67,9 @@
 		       unsigned int target_freq,
 		       unsigned int relation)
 {
-	struct clk * mpu_clk;
 	struct cpufreq_freqs freqs;
 	int ret = 0;
 
-	mpu_clk = clk_get(NULL, MPU_CLK);
-	if (IS_ERR(mpu_clk))
-		return PTR_ERR(mpu_clk);
-
 	freqs.old = omap_getspeed(0);
 	freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
 	freqs.cpu = 0;
@@ -92,15 +77,12 @@
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	ret = clk_set_rate(mpu_clk, target_freq * 1000);
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	clk_put(mpu_clk);
 
 	return ret;
 }
 
 static int __init omap_cpu_init(struct cpufreq_policy *policy)
 {
-	struct clk * mpu_clk;
-
 	mpu_clk = clk_get(NULL, MPU_CLK);
 	if (IS_ERR(mpu_clk))
 		return PTR_ERR(mpu_clk);
@@ -111,17 +93,23 @@
 	policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
 	policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000;
 	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-	clk_put(mpu_clk);
 
 	return 0;
 }
 
+static int omap_cpu_exit(struct cpufreq_policy *policy)
+{
+	clk_put(mpu_clk);
+	return 0;
+}
+
 static struct cpufreq_driver omap_driver = {
 	.flags		= CPUFREQ_STICKY,
 	.verify		= omap_verify_speed,
 	.target		= omap_target,
 	.get		= omap_getspeed,
 	.init		= omap_cpu_init,
+	.exit		= omap_cpu_exit,
 	.name		= "omap",
 };
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index c5dab1d..4a53f9b 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -89,68 +89,6 @@
 #endif	/* CONFIG_OMAP_DSP */
 
 /*-------------------------------------------------------------------------*/
-#if	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define	OMAP1_I2C_BASE		0xfffb3800
-#define OMAP2_I2C_BASE1		0x48070000
-#define OMAP_I2C_SIZE		0x3f
-#define OMAP1_I2C_INT		INT_I2C
-#define OMAP2_I2C_INT1		56
-
-static struct resource i2c_resources1[] = {
-	{
-		.start		= 0,
-		.end		= 0,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 0,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-/* DMA not used; works around erratum writing to non-empty i2c fifo */
-
-static struct platform_device omap_i2c_device1 = {
-	.name           = "i2c_omap",
-	.id             = 1,
-	.num_resources	= ARRAY_SIZE(i2c_resources1),
-	.resource	= i2c_resources1,
-};
-
-/* See also arch/arm/mach-omap2/devices.c for second I2C on 24xx */
-static void omap_init_i2c(void)
-{
-	if (cpu_is_omap24xx()) {
-		i2c_resources1[0].start = OMAP2_I2C_BASE1;
-		i2c_resources1[0].end = OMAP2_I2C_BASE1 + OMAP_I2C_SIZE;
-		i2c_resources1[1].start = OMAP2_I2C_INT1;
-	} else {
-		i2c_resources1[0].start = OMAP1_I2C_BASE;
-		i2c_resources1[0].end = OMAP1_I2C_BASE + OMAP_I2C_SIZE;
-		i2c_resources1[1].start = OMAP1_I2C_INT;
-	}
-
-	/* FIXME define and use a boot tag, in case of boards that
-	 * either don't wire up I2C, or chips that mux it differently...
-	 * it can include clocking and address info, maybe more.
-	 */
-	if (cpu_is_omap24xx()) {
-		omap_cfg_reg(M19_24XX_I2C1_SCL);
-		omap_cfg_reg(L15_24XX_I2C1_SDA);
-	} else {
-		omap_cfg_reg(I2C_SCL);
-		omap_cfg_reg(I2C_SDA);
-	}
-
-	(void) platform_device_register(&omap_i2c_device1);
-}
-
-#else
-static inline void omap_init_i2c(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
 #if	defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
 
 static void omap_init_kp(void)
@@ -501,7 +439,6 @@
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_init_dsp();
-	omap_init_i2c();
 	omap_init_kp();
 	omap_init_mmc();
 	omap_init_uwire();
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index a46676d..91004a3 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -137,7 +137,7 @@
 static inline void omap_enable_channel_irq(int lch);
 
 #define REVISIT_24XX()		printk(KERN_ERR "FIXME: no %s on 24xx\n", \
-						__FUNCTION__);
+						__func__);
 
 #ifdef CONFIG_ARCH_OMAP15XX
 /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
@@ -699,7 +699,7 @@
 	u32 reg;
 
 	if (!cpu_class_is_omap2()) {
-		printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __FUNCTION__);
+		printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
 		return;
 	}
 
@@ -1705,14 +1705,8 @@
 		status = OMAP_DMA_CSR_REG(ch);
 	}
 
-	if (likely(dma_chan[ch].callback != NULL)) {
-		if (dma_chan[ch].chain_id != -1)
-			dma_chan[ch].callback(dma_chan[ch].chain_id, status,
-					      dma_chan[ch].data);
-		else
-			dma_chan[ch].callback(ch, status, dma_chan[ch].data);
-
-	}
+	if (likely(dma_chan[ch].callback != NULL))
+		dma_chan[ch].callback(ch, status, dma_chan[ch].data);
 
 	OMAP_DMA_CSR_REG(ch) = status;
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index e719d0e..302ad8d 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -268,7 +268,7 @@
 	if (id <= 0 || id > dm_timer_count || dm_timers[id-1].reserved) {
 		spin_unlock_irqrestore(&dm_timer_lock, flags);
 		printk("BUG: warning at %s:%d/%s(): unable to get timer %d\n",
-		       __FILE__, __LINE__, __FUNCTION__, id);
+		       __FILE__, __LINE__, __func__, id);
 		dump_stack();
 		return NULL;
 	}
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 56f4d13..66a1455 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -333,13 +333,14 @@
 void omap_set_gpio_direction(int gpio, int is_input)
 {
 	struct gpio_bank *bank;
+	unsigned long flags;
 
 	if (check_gpio(gpio) < 0)
 		return;
 	bank = get_gpio_bank(gpio);
-	spin_lock(&bank->lock);
+	spin_lock_irqsave(&bank->lock, flags);
 	_set_gpio_direction(bank, get_gpio_index(gpio), is_input);
-	spin_unlock(&bank->lock);
+	spin_unlock_irqrestore(&bank->lock, flags);
 }
 
 static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
@@ -406,13 +407,14 @@
 void omap_set_gpio_dataout(int gpio, int enable)
 {
 	struct gpio_bank *bank;
+	unsigned long flags;
 
 	if (check_gpio(gpio) < 0)
 		return;
 	bank = get_gpio_bank(gpio);
-	spin_lock(&bank->lock);
+	spin_lock_irqsave(&bank->lock, flags);
 	_set_gpio_dataout(bank, get_gpio_index(gpio), enable);
-	spin_unlock(&bank->lock);
+	spin_unlock_irqrestore(&bank->lock, flags);
 }
 
 int omap_get_gpio_datain(int gpio)
@@ -624,6 +626,7 @@
 	struct gpio_bank *bank;
 	unsigned gpio;
 	int retval;
+	unsigned long flags;
 
 	if (!cpu_class_is_omap2() && irq > IH_MPUIO_BASE)
 		gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
@@ -642,13 +645,13 @@
 		return -EINVAL;
 
 	bank = get_irq_chip_data(irq);
-	spin_lock(&bank->lock);
+	spin_lock_irqsave(&bank->lock, flags);
 	retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
 	if (retval == 0) {
 		irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
 		irq_desc[irq].status |= type;
 	}
-	spin_unlock(&bank->lock);
+	spin_unlock_irqrestore(&bank->lock, flags);
 	return retval;
 }
 
@@ -830,11 +833,13 @@
  */
 static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 {
+	unsigned long flags;
+
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP16XX
 	case METHOD_MPUIO:
 	case METHOD_GPIO_1610:
-		spin_lock(&bank->lock);
+		spin_lock_irqsave(&bank->lock, flags);
 		if (enable) {
 			bank->suspend_wakeup |= (1 << gpio);
 			enable_irq_wake(bank->irq);
@@ -842,7 +847,7 @@
 			disable_irq_wake(bank->irq);
 			bank->suspend_wakeup &= ~(1 << gpio);
 		}
-		spin_unlock(&bank->lock);
+		spin_unlock_irqrestore(&bank->lock, flags);
 		return 0;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -853,7 +858,7 @@
 					(bank - gpio_bank) * 32 + gpio);
 			return -EINVAL;
 		}
-		spin_lock(&bank->lock);
+		spin_lock_irqsave(&bank->lock, flags);
 		if (enable) {
 			bank->suspend_wakeup |= (1 << gpio);
 			enable_irq_wake(bank->irq);
@@ -861,7 +866,7 @@
 			disable_irq_wake(bank->irq);
 			bank->suspend_wakeup &= ~(1 << gpio);
 		}
-		spin_unlock(&bank->lock);
+		spin_unlock_irqrestore(&bank->lock, flags);
 		return 0;
 #endif
 	default:
@@ -897,16 +902,17 @@
 int omap_request_gpio(int gpio)
 {
 	struct gpio_bank *bank;
+	unsigned long flags;
 
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
 
 	bank = get_gpio_bank(gpio);
-	spin_lock(&bank->lock);
+	spin_lock_irqsave(&bank->lock, flags);
 	if (unlikely(bank->reserved_map & (1 << get_gpio_index(gpio)))) {
 		printk(KERN_ERR "omap-gpio: GPIO %d is already reserved!\n", gpio);
 		dump_stack();
-		spin_unlock(&bank->lock);
+		spin_unlock_irqrestore(&bank->lock, flags);
 		return -1;
 	}
 	bank->reserved_map |= (1 << get_gpio_index(gpio));
@@ -925,7 +931,7 @@
 		__raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg);
 	}
 #endif
-	spin_unlock(&bank->lock);
+	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
 }
@@ -933,15 +939,16 @@
 void omap_free_gpio(int gpio)
 {
 	struct gpio_bank *bank;
+	unsigned long flags;
 
 	if (check_gpio(gpio) < 0)
 		return;
 	bank = get_gpio_bank(gpio);
-	spin_lock(&bank->lock);
+	spin_lock_irqsave(&bank->lock, flags);
 	if (unlikely(!(bank->reserved_map & (1 << get_gpio_index(gpio))))) {
 		printk(KERN_ERR "omap-gpio: GPIO %d wasn't reserved!\n", gpio);
 		dump_stack();
-		spin_unlock(&bank->lock);
+		spin_unlock_irqrestore(&bank->lock, flags);
 		return;
 	}
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -960,7 +967,7 @@
 #endif
 	bank->reserved_map &= ~(1 << get_gpio_index(gpio));
 	_reset_gpio(bank, gpio);
-	spin_unlock(&bank->lock);
+	spin_unlock_irqrestore(&bank->lock, flags);
 }
 
 /*
@@ -1194,11 +1201,12 @@
 {
 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
 	void __iomem		*mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
+	unsigned long		flags;
 
-	spin_lock(&bank->lock);
+	spin_lock_irqsave(&bank->lock, flags);
 	bank->saved_wakeup = __raw_readl(mask_reg);
 	__raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg);
-	spin_unlock(&bank->lock);
+	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
 }
@@ -1207,10 +1215,11 @@
 {
 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
 	void __iomem		*mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
+	unsigned long		flags;
 
-	spin_lock(&bank->lock);
+	spin_lock_irqsave(&bank->lock, flags);
 	__raw_writel(bank->saved_wakeup, mask_reg);
-	spin_unlock(&bank->lock);
+	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
 }
@@ -1277,6 +1286,11 @@
 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
 #endif
 
+/* This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
 static int __init _omap_gpio_init(void)
 {
 	int i;
@@ -1450,6 +1464,7 @@
 #endif
 		for (j = bank->virtual_irq_start;
 		     j < bank->virtual_irq_start + gpio_count; j++) {
+			lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class);
 			set_irq_chip_data(j, bank);
 			if (bank_is_mpuio(bank))
 				set_irq_chip(j, &mpuio_irq_chip);
@@ -1489,6 +1504,7 @@
 		void __iomem *wake_status;
 		void __iomem *wake_clear;
 		void __iomem *wake_set;
+		unsigned long flags;
 
 		switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -1509,11 +1525,11 @@
 			continue;
 		}
 
-		spin_lock(&bank->lock);
+		spin_lock_irqsave(&bank->lock, flags);
 		bank->saved_wakeup = __raw_readl(wake_status);
 		__raw_writel(0xffffffff, wake_clear);
 		__raw_writel(bank->suspend_wakeup, wake_set);
-		spin_unlock(&bank->lock);
+		spin_unlock_irqrestore(&bank->lock, flags);
 	}
 
 	return 0;
@@ -1530,6 +1546,7 @@
 		struct gpio_bank *bank = &gpio_bank[i];
 		void __iomem *wake_clear;
 		void __iomem *wake_set;
+		unsigned long flags;
 
 		switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -1548,10 +1565,10 @@
 			continue;
 		}
 
-		spin_lock(&bank->lock);
+		spin_lock_irqsave(&bank->lock, flags);
 		__raw_writel(0xffffffff, wake_clear);
 		__raw_writel(bank->saved_wakeup, wake_set);
-		spin_unlock(&bank->lock);
+		spin_unlock_irqrestore(&bank->lock, flags);
 	}
 
 	return 0;
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index ac9ff16..60f162d 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -130,8 +130,8 @@
 	dmadbg_dumpregs(fname, line, chan, &state);
 }
 
-#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan))
-#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan))
+#define dbg_showregs(chan) dmadbg_showregs(__func__, __LINE__, (chan))
+#define dbg_showchan(chan) dmadbg_showchan(__func__, __LINE__, (chan))
 #else
 #define dbg_showregs(chan) do { } while(0)
 #define dbg_showchan(chan) do { } while(0)
@@ -403,7 +403,7 @@
 
 			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
 				pr_debug("%s: buff not yet loaded, no more todo\n",
-					 __FUNCTION__);
+					 __func__);
 			} else {
 				chan->load_state = S3C2410_DMALOAD_1RUNNING;
 				s3c2410_dma_loadbuffer(chan, chan->next);
@@ -463,16 +463,16 @@
 		return -EINVAL;
 
 	pr_debug("%s: id=%p, data=%08x, size=%d\n",
-		 __FUNCTION__, id, (unsigned int)data, size);
+		 __func__, id, (unsigned int)data, size);
 
 	buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
 	if (buf == NULL) {
 		pr_debug("%s: out of memory (%ld alloc)\n",
-			 __FUNCTION__, (long)sizeof(*buf));
+			 __func__, (long)sizeof(*buf));
 		return -ENOMEM;
 	}
 
-	//pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
+	//pr_debug("%s: new buffer %p\n", __func__, buf);
 	//dbg_showchan(chan);
 
 	buf->next  = NULL;
@@ -486,18 +486,18 @@
 	if (chan->curr == NULL) {
 		/* we've got nothing loaded... */
 		pr_debug("%s: buffer %p queued onto empty channel\n",
-			 __FUNCTION__, buf);
+			 __func__, buf);
 
 		chan->curr = buf;
 		chan->end  = buf;
 		chan->next = NULL;
 	} else {
 		pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
-			 chan->number, __FUNCTION__, buf);
+			 chan->number, __func__, buf);
 
 		if (chan->end == NULL)
 			pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
-				 chan->number, __FUNCTION__, chan);
+				 chan->number, __func__, chan);
 
 		chan->end->next = buf;
 		chan->end = buf;
@@ -572,7 +572,7 @@
 		if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
 				/* flag error? */
 			printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
-			       chan->number, __FUNCTION__);
+			       chan->number, __func__);
 			return;
 		}
 		break;
@@ -658,7 +658,7 @@
 
 		if (buf->magic != BUF_MAGIC) {
 			printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
-			       chan->number, __FUNCTION__, buf);
+			       chan->number, __func__, buf);
 			return IRQ_HANDLED;
 		}
 
@@ -692,7 +692,7 @@
 			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
 				/* flag error? */
 				printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
-				       chan->number, __FUNCTION__);
+				       chan->number, __func__);
 				return IRQ_HANDLED;
 			}
 
@@ -759,7 +759,7 @@
 
 	if (!chan->irq_claimed) {
 		pr_debug("dma%d: %s : requesting irq %d\n",
-			 channel, __FUNCTION__, chan->irq);
+			 channel, __func__, chan->irq);
 
 		chan->irq_claimed = 1;
 		local_irq_restore(flags);
@@ -786,7 +786,7 @@
 
 	/* need to setup */
 
-	pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
+	pr_debug("%s: channel initialised, %p\n", __func__, chan);
 
 	return chan->number | DMACH_LOW_LEVEL;
 }
@@ -823,7 +823,7 @@
 
 	if (chan->state != S3C2410_DMA_IDLE) {
 		pr_debug("%s: need to stop dma channel %p\n",
-		       __FUNCTION__, chan);
+		       __func__, chan);
 
 		/* possibly flush the channel */
 		s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
@@ -852,7 +852,7 @@
 	unsigned long flags;
 	unsigned long tmp;
 
-	pr_debug("%s:\n", __FUNCTION__);
+	pr_debug("%s:\n", __func__);
 
 	dbg_showchan(chan);
 
@@ -907,14 +907,14 @@
 	struct s3c2410_dma_buf *buf, *next;
 	unsigned long flags;
 
-	pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
+	pr_debug("%s: chan %p (%d)\n", __func__, chan, chan->number);
 
 	dbg_showchan(chan);
 
 	local_irq_save(flags);
 
 	if (chan->state != S3C2410_DMA_IDLE) {
-		pr_debug("%s: stopping channel...\n", __FUNCTION__ );
+		pr_debug("%s: stopping channel...\n", __func__ );
 		s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
 	}
 
@@ -929,7 +929,7 @@
 			next = buf->next;
 
 			pr_debug("%s: free buffer %p, next %p\n",
-			       __FUNCTION__, buf, buf->next);
+			       __func__, buf, buf->next);
 
 			s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
 			s3c2410_dma_freebuf(buf);
@@ -976,7 +976,7 @@
 
 			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
 				pr_debug("%s: buff not yet loaded, no more todo\n",
-					 __FUNCTION__);
+					 __func__);
 			} else {
 				chan->load_state = S3C2410_DMALOAD_1RUNNING;
 				s3c2410_dma_loadbuffer(chan, chan->next);
@@ -1050,16 +1050,16 @@
 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 
 	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
-		 __FUNCTION__, channel, xferunit, dcon);
+		 __func__, channel, xferunit, dcon);
 
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon);
+	pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
 
 	dcon |= chan->dcon & dma_sel.dcon_mask;
 
-	pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon);
+	pr_debug("%s: New dcon is %08x\n", __func__, dcon);
 
 	switch (xferunit) {
 	case 1:
@@ -1075,14 +1075,14 @@
 		break;
 
 	default:
-		pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit);
+		pr_debug("%s: bad transfer size %d\n", __func__, xferunit);
 		return -EINVAL;
 	}
 
 	dcon |= S3C2410_DCON_HWTRIG;
 	dcon |= S3C2410_DCON_INTREQ;
 
-	pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon);
+	pr_debug("%s: dcon now %08x\n", __func__, dcon);
 
 	chan->dcon = dcon;
 	chan->xfer_unit = xferunit;
@@ -1099,7 +1099,7 @@
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags);
+	pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags);
 
 	chan->flags = flags;
 
@@ -1120,7 +1120,7 @@
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn);
+	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
 
 	chan->op_fn = rtn;
 
@@ -1136,7 +1136,7 @@
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn);
+	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
 
 	chan->callback_fn = rtn;
 
@@ -1170,7 +1170,7 @@
 		return -EINVAL;
 
 	pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
-		 __FUNCTION__, (int)source, hwcfg, devaddr);
+		 __func__, (int)source, hwcfg, devaddr);
 
 	chan->source = source;
 	chan->dev_addr = devaddr;
@@ -1180,7 +1180,7 @@
 	case S3C2410_DMASRC_HW:
 		/* source is hardware */
 		pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
-			 __FUNCTION__, devaddr, hwcfg);
+			 __func__, devaddr, hwcfg);
 		dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
 		dma_wrreg(chan, S3C2410_DMA_DISRC,  devaddr);
 		dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
@@ -1190,8 +1190,8 @@
 
 	case S3C2410_DMASRC_MEM:
 		/* source is memory */
-		pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n",
-			  __FUNCTION__, devaddr, hwcfg);
+		pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
+			 __func__, devaddr, hwcfg);
 		dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
 		dma_wrreg(chan, S3C2410_DMA_DIDST,  devaddr);
 		dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h
index 1c2b55c..0f64044 100644
--- a/include/asm-arm/arch-omap/board-h3.h
+++ b/include/asm-arm/arch-omap/board-h3.h
@@ -36,7 +36,7 @@
 
 #define NR_IRQS				(MAXIRQNUM + 1)
 
-extern void __init h3_mmc_init(void);
+extern void h3_mmc_init(void);
 extern void h3_mmc_slot_cover_handler(void *arg, int state);
 
 #endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h
index 442aecb..224e009 100644
--- a/include/asm-arm/arch-omap/common.h
+++ b/include/asm-arm/arch-omap/common.h
@@ -27,9 +27,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
 #define __ARCH_ARM_MACH_OMAP_COMMON_H
 
-#ifdef CONFIG_I2C_OMAP
 #include <linux/i2c.h>
-#endif
 
 struct sys_timer;
 
@@ -41,7 +39,12 @@
 				 struct i2c_board_info const *info,
 				 unsigned len);
 #else
-#define omap_register_i2c_bus(a, b, c, d)	0
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len)
+{
+	return 0;
+}
 #endif
 
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/include/asm-arm/arch-omap/gpioexpander.h b/include/asm-arm/arch-omap/gpioexpander.h
index 7a43b0a..4eed1f8 100644
--- a/include/asm-arm/arch-omap/gpioexpander.h
+++ b/include/asm-arm/arch-omap/gpioexpander.h
@@ -18,7 +18,18 @@
 
 /* Function Prototypes for GPIO Expander functions */
 
+#ifdef CONFIG_GPIOEXPANDER_OMAP
 int read_gpio_expa(u8 *, int);
 int write_gpio_expa(u8 , int);
+#else
+static inline int read_gpio_expa(u8 *val, int addr)
+{
+	return 0;
+}
+static inline int write_gpio_expa(u8 val, int addr)
+{
+	return 0;
+}
+#endif
 
 #endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h
index 33c83dd..2e5868b 100644
--- a/include/asm-arm/pgtable-nommu.h
+++ b/include/asm-arm/pgtable-nommu.h
@@ -92,6 +92,8 @@
 
 #define FIRST_USER_ADDRESS      (0)
 
+#include <asm-generic/pgtable.h>
+
 #else 
 
 /*
diff --git a/include/asm-arm/plat-s3c/uncompress.h b/include/asm-arm/plat-s3c/uncompress.h
index b5e6208..19b9eda 100644
--- a/include/asm-arm/plat-s3c/uncompress.h
+++ b/include/asm-arm/plat-s3c/uncompress.h
@@ -27,8 +27,8 @@
 
 /* defines for UART registers */
 
-#include "asm/plat-s3c/regs-serial.h"
-#include "asm/plat-s3c/regs-watchdog.h"
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/plat-s3c/regs-watchdog.h>
 
 /* working in physical space... */
 #undef S3C2410_WDOGREG
diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h
index a4ce457..75ec760 100644
--- a/include/asm-arm/proc-fns.h
+++ b/include/asm-arm/proc-fns.h
@@ -214,9 +214,9 @@
 #ifndef __ASSEMBLY__
 
 #ifndef MULTI_CPU
-#include "asm/cpu-single.h"
+#include <asm/cpu-single.h>
 #else
-#include "asm/cpu-multi32.h"
+#include <asm/cpu-multi32.h>
 #endif
 
 #include <asm/memory.h>