Add nl80211 commands to get and set o11s mesh networking parameters
The two new commands are NL80211_CMD_GET_MESH_PARAMS and
NL80211_CMD_SET_MESH_PARAMS. There is a new attribute enum,
NL80211_ATTR_MESH_PARAMS, which enumerates the various mesh configuration
parameters.
Moved struct mesh_config from mac80211/ieee80211_i.h to net/cfg80211.h.
nl80211_get_mesh_params and nl80211_set_mesh_params unpack the netlink messages
and ask the driver to get or set the configuration. This is done via two new
function stubs, get_mesh_params and set_mesh_params, in struct cfg80211_ops.
Signed-off-by: Colin McCabe <colin@cozybit.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 2b87aec..9a16e9e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -96,6 +96,8 @@
[NL80211_ATTR_BSS_SHORT_PREAMBLE] = { .type = NLA_U8 },
[NL80211_ATTR_BSS_SHORT_SLOT_TIME] = { .type = NLA_U8 },
+ [NL80211_ATTR_MESH_PARAMS] = { .type = NLA_NESTED },
+
[NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY,
.len = NL80211_HT_CAPABILITY_LEN },
};
@@ -1698,6 +1700,183 @@
return r;
}
+static int nl80211_get_mesh_params(struct sk_buff *skb,
+ struct genl_info *info)
+{
+ struct cfg80211_registered_device *drv;
+ struct mesh_config cur_params;
+ int err;
+ struct net_device *dev;
+ void *hdr;
+ struct nlattr *pinfoattr;
+ struct sk_buff *msg;
+
+ /* Look up our device */
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ if (err)
+ return err;
+
+ /* Get the mesh params */
+ rtnl_lock();
+ err = drv->ops->get_mesh_params(&drv->wiphy, dev, &cur_params);
+ rtnl_unlock();
+ if (err)
+ goto out;
+
+ /* Draw up a netlink message to send back */
+ msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+ if (!msg) {
+ err = -ENOBUFS;
+ goto out;
+ }
+ hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
+ NL80211_CMD_GET_MESH_PARAMS);
+ if (!hdr)
+ goto nla_put_failure;
+ pinfoattr = nla_nest_start(msg, NL80211_ATTR_MESH_PARAMS);
+ if (!pinfoattr)
+ goto nla_put_failure;
+ NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
+ NLA_PUT_U16(msg, NL80211_MESHCONF_RETRY_TIMEOUT,
+ cur_params.dot11MeshRetryTimeout);
+ NLA_PUT_U16(msg, NL80211_MESHCONF_CONFIRM_TIMEOUT,
+ cur_params.dot11MeshConfirmTimeout);
+ NLA_PUT_U16(msg, NL80211_MESHCONF_HOLDING_TIMEOUT,
+ cur_params.dot11MeshHoldingTimeout);
+ NLA_PUT_U16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
+ cur_params.dot11MeshMaxPeerLinks);
+ NLA_PUT_U8(msg, NL80211_MESHCONF_MAX_RETRIES,
+ cur_params.dot11MeshMaxRetries);
+ NLA_PUT_U8(msg, NL80211_MESHCONF_TTL,
+ cur_params.dot11MeshTTL);
+ NLA_PUT_U8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+ cur_params.auto_open_plinks);
+ NLA_PUT_U8(msg, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
+ cur_params.dot11MeshHWMPmaxPREQretries);
+ NLA_PUT_U32(msg, NL80211_MESHCONF_PATH_REFRESH_TIME,
+ cur_params.path_refresh_time);
+ NLA_PUT_U16(msg, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
+ cur_params.min_discovery_timeout);
+ NLA_PUT_U32(msg, NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
+ cur_params.dot11MeshHWMPactivePathTimeout);
+ NLA_PUT_U16(msg, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
+ cur_params.dot11MeshHWMPpreqMinInterval);
+ NLA_PUT_U16(msg, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+ cur_params.dot11MeshHWMPnetDiameterTraversalTime);
+ nla_nest_end(msg, pinfoattr);
+ genlmsg_end(msg, hdr);
+ err = genlmsg_unicast(msg, info->snd_pid);
+ goto out;
+
+nla_put_failure:
+ genlmsg_cancel(msg, hdr);
+ err = -EMSGSIZE;
+out:
+ /* Cleanup */
+ cfg80211_put_dev(drv);
+ dev_put(dev);
+ return err;
+}
+
+#define FILL_IN_MESH_PARAM_IF_SET(table, cfg, param, mask, attr_num, nla_fn) \
+do {\
+ if (table[attr_num]) {\
+ cfg.param = nla_fn(table[attr_num]); \
+ mask |= (1 << (attr_num - 1)); \
+ } \
+} while (0);\
+
+static struct nla_policy
+nl80211_meshconf_params_policy[NL80211_MESHCONF_ATTR_MAX+1] __read_mostly = {
+ [NL80211_MESHCONF_RETRY_TIMEOUT] = { .type = NLA_U16 },
+ [NL80211_MESHCONF_CONFIRM_TIMEOUT] = { .type = NLA_U16 },
+ [NL80211_MESHCONF_HOLDING_TIMEOUT] = { .type = NLA_U16 },
+ [NL80211_MESHCONF_MAX_PEER_LINKS] = { .type = NLA_U16 },
+ [NL80211_MESHCONF_MAX_RETRIES] = { .type = NLA_U8 },
+ [NL80211_MESHCONF_TTL] = { .type = NLA_U8 },
+ [NL80211_MESHCONF_AUTO_OPEN_PLINKS] = { .type = NLA_U8 },
+
+ [NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES] = { .type = NLA_U8 },
+ [NL80211_MESHCONF_PATH_REFRESH_TIME] = { .type = NLA_U32 },
+ [NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT] = { .type = NLA_U16 },
+ [NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT] = { .type = NLA_U32 },
+ [NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL] = { .type = NLA_U16 },
+ [NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME] = { .type = NLA_U16 },
+};
+
+static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
+{
+ int err;
+ u32 mask;
+ struct cfg80211_registered_device *drv;
+ struct net_device *dev;
+ struct mesh_config cfg;
+ struct nlattr *tb[NL80211_MESHCONF_ATTR_MAX + 1];
+ struct nlattr *parent_attr;
+
+ parent_attr = info->attrs[NL80211_ATTR_MESH_PARAMS];
+ if (!parent_attr)
+ return -EINVAL;
+ if (nla_parse_nested(tb, NL80211_MESHCONF_ATTR_MAX,
+ parent_attr, nl80211_meshconf_params_policy))
+ return -EINVAL;
+
+ err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
+ if (err)
+ return err;
+
+ /* This makes sure that there aren't more than 32 mesh config
+ * parameters (otherwise our bitfield scheme would not work.) */
+ BUILD_BUG_ON(NL80211_MESHCONF_ATTR_MAX > 32);
+
+ /* Fill in the params struct */
+ mask = 0;
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshRetryTimeout,
+ mask, NL80211_MESHCONF_RETRY_TIMEOUT, nla_get_u16);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshConfirmTimeout,
+ mask, NL80211_MESHCONF_CONFIRM_TIMEOUT, nla_get_u16);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHoldingTimeout,
+ mask, NL80211_MESHCONF_HOLDING_TIMEOUT, nla_get_u16);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxPeerLinks,
+ mask, NL80211_MESHCONF_MAX_PEER_LINKS, nla_get_u16);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxRetries,
+ mask, NL80211_MESHCONF_MAX_RETRIES, nla_get_u8);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshTTL,
+ mask, NL80211_MESHCONF_TTL, nla_get_u8);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, auto_open_plinks,
+ mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS, nla_get_u8);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPmaxPREQretries,
+ mask, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
+ nla_get_u8);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, path_refresh_time,
+ mask, NL80211_MESHCONF_PATH_REFRESH_TIME, nla_get_u32);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, min_discovery_timeout,
+ mask, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
+ nla_get_u16);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout,
+ mask, NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
+ nla_get_u32);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPpreqMinInterval,
+ mask, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
+ nla_get_u16);
+ FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
+ dot11MeshHWMPnetDiameterTraversalTime,
+ mask, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+ nla_get_u16);
+
+ /* Apply changes */
+ rtnl_lock();
+ err = drv->ops->set_mesh_params(&drv->wiphy, dev, &cfg, mask);
+ rtnl_unlock();
+
+ /* cleanup */
+ cfg80211_put_dev(drv);
+ dev_put(dev);
+ return err;
+}
+
+#undef FILL_IN_MESH_PARAM_IF_SET
+
static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info)
{
struct nlattr *tb[NL80211_REG_RULE_ATTR_MAX + 1];
@@ -1915,6 +2094,18 @@
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
+ {
+ .cmd = NL80211_CMD_GET_MESH_PARAMS,
+ .doit = nl80211_get_mesh_params,
+ .policy = nl80211_policy,
+ /* can be retrieved by unprivileged users */
+ },
+ {
+ .cmd = NL80211_CMD_SET_MESH_PARAMS,
+ .doit = nl80211_set_mesh_params,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
};
/* multicast groups */