hwmon: Add Freescale MC13783 ADC driver
This driver provides support for the ADC integrated into the
Freescale MC13783 PMIC.
Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/Documentation/hwmon/mc13783-adc b/Documentation/hwmon/mc13783-adc
new file mode 100644
index 0000000..044531a
--- /dev/null
+++ b/Documentation/hwmon/mc13783-adc
@@ -0,0 +1,50 @@
+Kernel driver mc13783-adc
+=========================
+
+Supported chips:
+ * Freescale Atlas MC13783
+ Prefix: 'mc13783_adc'
+ Datasheet: http://www.freescale.com/files/rf_if/doc/data_sheet/MC13783.pdf?fsrch=1
+
+Authors:
+ Sascha Hauer <s.hauer@pengutronix.de>
+ Luotao Fu <l.fu@pengutronix.de>
+
+Description
+-----------
+
+The Freescale MC13783 is a Power Management and Audio Circuit. Among
+other things it contains a 10-bit A/D converter. The converter has 16
+channels which can be used in different modes.
+The A/D converter has a resolution of 2.25mV. Channels 0-4 have
+a dedicated meaning with chip internal scaling applied. Channels 5-7
+can be used as general purpose inputs or alternatively in a dedicated
+mode. Channels 12-15 are occupied by the touchscreen if it's active.
+
+Currently the driver only supports channels 2 and 5-15 with no alternative
+modes for channels 5-7.
+
+See this table for the meaning of the different channels and their chip
+internal scaling:
+
+Channel Signal Input Range Scaling
+-------------------------------------------------------------------------------
+0 Battery Voltage (BATT) 2.50 - 4.65V -2.40V
+1 Battery Current (BATT - BATTISNS) -50 - 50 mV x20
+2 Application Supply (BP) 2.50 - 4.65V -2.40V
+3 Charger Voltage (CHRGRAW) 0 - 10V / /5
+ 0 - 20V /10
+4 Charger Current (CHRGISNSP-CHRGISNSN) -0.25V - 0.25V x4
+5 General Purpose ADIN5 / Battery Pack Thermistor 0 - 2.30V No
+6 General Purpose ADIN6 / Backup Voltage (LICELL) 0 - 2.30V / No /
+ 1.50 - 3.50V -1.20V
+7 General Purpose ADIN7 / UID / Die Temperature 0 - 2.30V / No /
+ 0 - 2.55V / x0.9 / No
+8 General Purpose ADIN8 0 - 2.30V No
+9 General Purpose ADIN9 0 - 2.30V No
+10 General Purpose ADIN10 0 - 2.30V No
+11 General Purpose ADIN11 0 - 2.30V No
+12 General Purpose TSX1 / Touchscreen X-plate 1 0 - 2.30V No
+13 General Purpose TSX2 / Touchscreen X-plate 2 0 - 2.30V No
+14 General Purpose TSY1 / Touchscreen Y-plate 1 0 - 2.30V No
+15 General Purpose TSY2 / Touchscreen Y-plate 2 0 - 2.30V No