iwlegacy: remove il argument from IWL_ERR/INFO/WARN/CRIT
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
diff --git a/drivers/net/wireless/iwlegacy/iwl-3945.c b/drivers/net/wireless/iwlegacy/iwl-3945.c
index a1e2a42..cf47fdb 100644
--- a/drivers/net/wireless/iwlegacy/iwl-3945.c
+++ b/drivers/net/wireless/iwlegacy/iwl-3945.c
@@ -166,7 +166,7 @@
base = le32_to_cpu(il->card_alive.log_event_table_ptr);
if (!il3945_hw_valid_rtc_data_addr(base)) {
- IL_ERR(il, "Invalid event log pointer 0x%08X\n", base);
+ IL_ERR("Invalid event log pointer 0x%08X\n", base);
return;
}
@@ -317,7 +317,7 @@
int fail;
if ((index >= txq->q.n_bd) || (il_queue_used(&txq->q, index) == 0)) {
- IL_ERR(il, "Read index for DMA queue txq_id (%d) index %d "
+ IL_ERR("Read index for DMA queue txq_id (%d) index %d "
"is out of range [0-%d] %d %d\n", txq_id,
index, txq->q.n_bd, txq->q.write_ptr,
txq->q.read_ptr);
@@ -350,7 +350,7 @@
il3945_tx_queue_reclaim(il, txq_id, index);
if (status & TX_ABORT_REQUIRED_MSK)
- IL_ERR(il, "TODO: Implement Tx ABORT REQUIRED!!!\n");
+ IL_ERR("TODO: Implement Tx ABORT REQUIRED!!!\n");
}
@@ -484,7 +484,7 @@
skb = dev_alloc_skb(128);
if (!skb) {
- IL_ERR(il, "dev_alloc_skb failed\n");
+ IL_ERR("dev_alloc_skb failed\n");
return;
}
@@ -600,7 +600,7 @@
count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
if ((count >= NUM_TFD_CHUNKS) || (count < 0)) {
- IL_ERR(il, "Error can not send more than %d chunks\n",
+ IL_ERR("Error can not send more than %d chunks\n",
NUM_TFD_CHUNKS);
return -EINVAL;
}
@@ -633,7 +633,7 @@
/* sanity check */
counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
if (counter > NUM_TFD_CHUNKS) {
- IL_ERR(il, "Too many chunks: %i\n", counter);
+ IL_ERR("Too many chunks: %i\n", counter);
/* @todo issue fatal error, it is quite serious situation */
return;
}
@@ -855,7 +855,7 @@
rc = il_tx_queue_init(il, &il->txq[txq_id],
slots_num, txq_id);
if (rc) {
- IL_ERR(il, "Tx %d queue init failed\n", txq_id);
+ IL_ERR("Tx %d queue init failed\n", txq_id);
goto error;
}
}
@@ -971,7 +971,7 @@
if (!rxq->bd) {
rc = il_rx_queue_alloc(il);
if (rc) {
- IL_ERR(il, "Unable to initialize Rx queue\n");
+ IL_ERR("Unable to initialize Rx queue\n");
return -ENOMEM;
}
} else
@@ -1078,7 +1078,7 @@
/* handle insane temp reading */
if (il3945_hw_reg_temp_out_of_range(temperature)) {
- IL_ERR(il, "Error bad temperature value %d\n", temperature);
+ IL_ERR("Error bad temperature value %d\n", temperature);
/* if really really hot(?),
* substitute the 3rd band/group's temp measured at factory */
@@ -1388,7 +1388,7 @@
txpower.band = (il->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
ch_info = il_get_channel_info(il, il->band, chan);
if (!ch_info) {
- IL_ERR(il,
+ IL_ERR(
"Failed to get channel info for channel %d [%d]\n",
chan, il->band);
return -EINVAL;
@@ -1686,7 +1686,7 @@
pkt = (struct il_rx_packet *)cmd.reply_page;
if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
- IL_ERR(il, "Bad return from REPLY_RXON_ASSOC command\n");
+ IL_ERR("Bad return from REPLY_RXON_ASSOC command\n");
rc = -EIO;
}
@@ -1727,7 +1727,7 @@
rc = il_check_rxon_cmd(il, ctx);
if (rc) {
- IL_ERR(il, "Invalid RXON configuration. Not committing.\n");
+ IL_ERR("Invalid RXON configuration. Not committing.\n");
return -EINVAL;
}
@@ -1739,7 +1739,7 @@
rc = il_send_rxon_assoc(il,
&il->contexts[IL_RXON_CTX_BSS]);
if (rc) {
- IL_ERR(il, "Error setting RXON_ASSOC "
+ IL_ERR("Error setting RXON_ASSOC "
"configuration (%d).\n", rc);
return rc;
}
@@ -1775,7 +1775,7 @@
* active_rxon back to what it was previously */
if (rc) {
active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
- IL_ERR(il, "Error clearing ASSOC_MSK on current "
+ IL_ERR("Error clearing ASSOC_MSK on current "
"configuration (%d).\n", rc);
return rc;
}
@@ -1807,7 +1807,7 @@
sizeof(struct il3945_rxon_cmd),
staging_rxon);
if (rc) {
- IL_ERR(il, "Error setting new configuration (%d).\n", rc);
+ IL_ERR("Error setting new configuration (%d).\n", rc);
return rc;
}
@@ -1824,14 +1824,14 @@
* send a new TXPOWER command or we won't be able to Tx any frames */
rc = il_set_tx_power(il, il->tx_power_next, true);
if (rc) {
- IL_ERR(il, "Error setting Tx power (%d).\n", rc);
+ IL_ERR("Error setting Tx power (%d).\n", rc);
return rc;
}
/* Init the hardware's rate fallback order based on the band */
rc = il3945_init_hw_rate_table(il);
if (rc) {
- IL_ERR(il, "Error setting HW rate table: %02X\n", rc);
+ IL_ERR("Error setting HW rate table: %02X\n", rc);
return -EIO;
}
@@ -1989,7 +1989,7 @@
/* sanity check on factory saturation power value */
if (group->saturation_power < 40) {
- IL_WARN(il, "Error: saturation power is %d, "
+ IL_WARN("Error: saturation power is %d, "
"less than minimum expected 40\n",
group->saturation_power);
return;
@@ -2119,7 +2119,7 @@
ch_info->group_index,
&power_idx);
if (rc) {
- IL_ERR(il, "Invalid power index\n");
+ IL_ERR("Invalid power index\n");
return rc;
}
pwr_info->base_power_index = (u8) power_idx;
@@ -2187,7 +2187,7 @@
rc = il_poll_direct_bit(il, FH39_RSSR_STATUS,
FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
if (rc < 0)
- IL_ERR(il, "Can't stop Rx DMA.\n");
+ IL_ERR("Can't stop Rx DMA.\n");
return 0;
}
@@ -2263,7 +2263,7 @@
ret = il_add_station_common(il, ctx, addr, 0, NULL, &sta_id);
if (ret) {
- IL_ERR(il, "Unable to add station %pM\n", addr);
+ IL_ERR("Unable to add station %pM\n", addr);
return ret;
}
@@ -2390,7 +2390,7 @@
sizeof(struct il3945_shared),
&il->_3945.shared_phys, GFP_KERNEL);
if (!il->_3945.shared_virt) {
- IL_ERR(il, "failed to allocate pci memory\n");
+ IL_ERR("failed to allocate pci memory\n");
return -ENOMEM;
}
@@ -2481,7 +2481,7 @@
reg += sizeof(u32), image++) {
val = il_read_prph(il, reg);
if (val != le32_to_cpu(*image)) {
- IL_ERR(il, "BSM uCode verification failed at "
+ IL_ERR("BSM uCode verification failed at "
"addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
BSM_SRAM_LOWER_BOUND,
reg - BSM_SRAM_LOWER_BOUND, len,
@@ -2620,7 +2620,7 @@
if (i < 100)
D_INFO("BSM write complete, poll %d iterations\n", i);
else {
- IL_ERR(il, "BSM write did not complete!\n");
+ IL_ERR("BSM write did not complete!\n");
return -EIO;
}