ASoC: Add WM8993 CODEC driver
The WM8993 is a highly integrated ultra-low power hi-fi CODEC designed
for portable devices such as multimedia phones.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c
new file mode 100644
index 0000000..3e5c65a
--- /dev/null
+++ b/sound/soc/codecs/wm8993.c
@@ -0,0 +1,2203 @@
+/*
+ * wm8993.c -- WM8993 ALSA SoC audio driver
+ *
+ * Copyright 2009 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/wm8993.h>
+
+#include "wm8993.h"
+
+static u16 wm8993_reg_defaults[WM8993_REGISTER_COUNT] = {
+ 0x8993, /* R0 - Software Reset */
+ 0x0000, /* R1 - Power Management (1) */
+ 0x6000, /* R2 - Power Management (2) */
+ 0x0000, /* R3 - Power Management (3) */
+ 0x4050, /* R4 - Audio Interface (1) */
+ 0x4000, /* R5 - Audio Interface (2) */
+ 0x01C8, /* R6 - Clocking 1 */
+ 0x0000, /* R7 - Clocking 2 */
+ 0x0000, /* R8 - Audio Interface (3) */
+ 0x0040, /* R9 - Audio Interface (4) */
+ 0x0004, /* R10 - DAC CTRL */
+ 0x00C0, /* R11 - Left DAC Digital Volume */
+ 0x00C0, /* R12 - Right DAC Digital Volume */
+ 0x0000, /* R13 - Digital Side Tone */
+ 0x0300, /* R14 - ADC CTRL */
+ 0x00C0, /* R15 - Left ADC Digital Volume */
+ 0x00C0, /* R16 - Right ADC Digital Volume */
+ 0x0000, /* R17 */
+ 0x0000, /* R18 - GPIO CTRL 1 */
+ 0x0010, /* R19 - GPIO1 */
+ 0x0000, /* R20 - IRQ_DEBOUNCE */
+ 0x0000, /* R21 */
+ 0x8000, /* R22 - GPIOCTRL 2 */
+ 0x0800, /* R23 - GPIO_POL */
+ 0x008B, /* R24 - Left Line Input 1&2 Volume */
+ 0x008B, /* R25 - Left Line Input 3&4 Volume */
+ 0x008B, /* R26 - Right Line Input 1&2 Volume */
+ 0x008B, /* R27 - Right Line Input 3&4 Volume */
+ 0x006D, /* R28 - Left Output Volume */
+ 0x006D, /* R29 - Right Output Volume */
+ 0x0066, /* R30 - Line Outputs Volume */
+ 0x0020, /* R31 - HPOUT2 Volume */
+ 0x0079, /* R32 - Left OPGA Volume */
+ 0x0079, /* R33 - Right OPGA Volume */
+ 0x0003, /* R34 - SPKMIXL Attenuation */
+ 0x0003, /* R35 - SPKMIXR Attenuation */
+ 0x0011, /* R36 - SPKOUT Mixers */
+ 0x0100, /* R37 - SPKOUT Boost */
+ 0x0079, /* R38 - Speaker Volume Left */
+ 0x0079, /* R39 - Speaker Volume Right */
+ 0x0000, /* R40 - Input Mixer2 */
+ 0x0000, /* R41 - Input Mixer3 */
+ 0x0000, /* R42 - Input Mixer4 */
+ 0x0000, /* R43 - Input Mixer5 */
+ 0x0000, /* R44 - Input Mixer6 */
+ 0x0000, /* R45 - Output Mixer1 */
+ 0x0000, /* R46 - Output Mixer2 */
+ 0x0000, /* R47 - Output Mixer3 */
+ 0x0000, /* R48 - Output Mixer4 */
+ 0x0000, /* R49 - Output Mixer5 */
+ 0x0000, /* R50 - Output Mixer6 */
+ 0x0000, /* R51 - HPOUT2 Mixer */
+ 0x0000, /* R52 - Line Mixer1 */
+ 0x0000, /* R53 - Line Mixer2 */
+ 0x0000, /* R54 - Speaker Mixer */
+ 0x0000, /* R55 - Additional Control */
+ 0x0000, /* R56 - AntiPOP1 */
+ 0x0000, /* R57 - AntiPOP2 */
+ 0x0000, /* R58 - MICBIAS */
+ 0x0000, /* R59 */
+ 0x0000, /* R60 - FLL Control 1 */
+ 0x0000, /* R61 - FLL Control 2 */
+ 0x0000, /* R62 - FLL Control 3 */
+ 0x2EE0, /* R63 - FLL Control 4 */
+ 0x0002, /* R64 - FLL Control 5 */
+ 0x2287, /* R65 - Clocking 3 */
+ 0x025F, /* R66 - Clocking 4 */
+ 0x0000, /* R67 - MW Slave Control */
+ 0x0000, /* R68 */
+ 0x0002, /* R69 - Bus Control 1 */
+ 0x0000, /* R70 - Write Sequencer 0 */
+ 0x0000, /* R71 - Write Sequencer 1 */
+ 0x0000, /* R72 - Write Sequencer 2 */
+ 0x0000, /* R73 - Write Sequencer 3 */
+ 0x0000, /* R74 - Write Sequencer 4 */
+ 0x0000, /* R75 - Write Sequencer 5 */
+ 0x1F25, /* R76 - Charge Pump 1 */
+ 0x0000, /* R77 */
+ 0x0000, /* R78 */
+ 0x0000, /* R79 */
+ 0x0000, /* R80 */
+ 0x0000, /* R81 - Class W 0 */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 - DC Servo 0 */
+ 0x054A, /* R85 - DC Servo 1 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 - DC Servo 3 */
+ 0x0000, /* R88 - DC Servo Readback 0 */
+ 0x0000, /* R89 - DC Servo Readback 1 */
+ 0x0000, /* R90 - DC Servo Readback 2 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 */
+ 0x0000, /* R93 */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0100, /* R96 - Analogue HP 0 */
+ 0x0000, /* R97 */
+ 0x0000, /* R98 - EQ1 */
+ 0x000C, /* R99 - EQ2 */
+ 0x000C, /* R100 - EQ3 */
+ 0x000C, /* R101 - EQ4 */
+ 0x000C, /* R102 - EQ5 */
+ 0x000C, /* R103 - EQ6 */
+ 0x0FCA, /* R104 - EQ7 */
+ 0x0400, /* R105 - EQ8 */
+ 0x00D8, /* R106 - EQ9 */
+ 0x1EB5, /* R107 - EQ10 */
+ 0xF145, /* R108 - EQ11 */
+ 0x0B75, /* R109 - EQ12 */
+ 0x01C5, /* R110 - EQ13 */
+ 0x1C58, /* R111 - EQ14 */
+ 0xF373, /* R112 - EQ15 */
+ 0x0A54, /* R113 - EQ16 */
+ 0x0558, /* R114 - EQ17 */
+ 0x168E, /* R115 - EQ18 */
+ 0xF829, /* R116 - EQ19 */
+ 0x07AD, /* R117 - EQ20 */
+ 0x1103, /* R118 - EQ21 */
+ 0x0564, /* R119 - EQ22 */
+ 0x0559, /* R120 - EQ23 */
+ 0x4000, /* R121 - EQ24 */
+ 0x0000, /* R122 - Digital Pulls */
+ 0x0F08, /* R123 - DRC Control 1 */
+ 0x0000, /* R124 - DRC Control 2 */
+ 0x0080, /* R125 - DRC Control 3 */
+ 0x0000, /* R126 - DRC Control 4 */
+};
+
+static struct {
+ int ratio;
+ int clk_sys_rate;
+} clk_sys_rates[] = {
+ { 64, 0 },
+ { 128, 1 },
+ { 192, 2 },
+ { 256, 3 },
+ { 384, 4 },
+ { 512, 5 },
+ { 768, 6 },
+ { 1024, 7 },
+ { 1408, 8 },
+ { 1536, 9 },
+};
+
+static struct {
+ int rate;
+ int sample_rate;
+} sample_rates[] = {
+ { 8000, 0 },
+ { 11025, 1 },
+ { 12000, 1 },
+ { 16000, 2 },
+ { 22050, 3 },
+ { 24000, 3 },
+ { 32000, 4 },
+ { 44100, 5 },
+ { 48000, 5 },
+};
+
+static struct {
+ int div; /* *10 due to .5s */
+ int bclk_div;
+} bclk_divs[] = {
+ { 10, 0 },
+ { 15, 1 },
+ { 20, 2 },
+ { 30, 3 },
+ { 40, 4 },
+ { 55, 5 },
+ { 60, 6 },
+ { 80, 7 },
+ { 110, 8 },
+ { 120, 9 },
+ { 160, 10 },
+ { 220, 11 },
+ { 240, 12 },
+ { 320, 13 },
+ { 440, 14 },
+ { 480, 15 },
+};
+
+struct wm8993_priv {
+ u16 reg_cache[WM8993_REGISTER_COUNT];
+ struct wm8993_platform_data pdata;
+ struct snd_soc_codec codec;
+ int master;
+ int sysclk_source;
+ unsigned int mclk_rate;
+ unsigned int sysclk_rate;
+ unsigned int fs;
+ unsigned int bclk;
+ int class_w_users;
+ unsigned int fll_fref;
+ unsigned int fll_fout;
+};
+
+static unsigned int wm8993_read_hw(struct snd_soc_codec *codec, u8 reg)
+{
+ struct i2c_msg xfer[2];
+ u16 data;
+ int ret;
+ struct i2c_client *i2c = codec->control_data;
+
+ /* Write register */
+ xfer[0].addr = i2c->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = 1;
+ xfer[0].buf = ®
+
+ /* Read data */
+ xfer[1].addr = i2c->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = 2;
+ xfer[1].buf = (u8 *)&data;
+
+ ret = i2c_transfer(i2c->adapter, xfer, 2);
+ if (ret != 2) {
+ dev_err(codec->dev, "Failed to read 0x%x: %d\n", reg, ret);
+ return 0;
+ }
+
+ return (data >> 8) | ((data & 0xff) << 8);
+}
+
+static int wm8993_volatile(unsigned int reg)
+{
+ switch (reg) {
+ case WM8993_SOFTWARE_RESET:
+ case WM8993_DC_SERVO_0:
+ case WM8993_DC_SERVO_READBACK_0:
+ case WM8993_DC_SERVO_READBACK_1:
+ case WM8993_DC_SERVO_READBACK_2:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static unsigned int wm8993_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *reg_cache = codec->reg_cache;
+
+ BUG_ON(reg > WM8993_MAX_REGISTER);
+
+ if (wm8993_volatile(reg))
+ return wm8993_read_hw(codec, reg);
+ else
+ return reg_cache[reg];
+}
+
+static int wm8993_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u16 *reg_cache = codec->reg_cache;
+ u8 data[3];
+ int ret;
+
+ BUG_ON(reg > WM8993_MAX_REGISTER);
+
+ /* data is
+ * D15..D9 WM8993 register offset
+ * D8...D0 register data
+ */
+ data[0] = reg;
+ data[1] = value >> 8;
+ data[2] = value & 0x00ff;
+
+ if (!wm8993_volatile(reg))
+ reg_cache[reg] = value;
+
+ ret = codec->hw_write(codec->control_data, data, 3);
+
+ if (ret == 3)
+ return 0;
+ if (ret < 0)
+ return ret;
+ return -EIO;
+}
+
+struct _fll_div {
+ u16 fll_fratio;
+ u16 fll_outdiv;
+ u16 fll_clk_ref_div;
+ u16 n;
+ u16 k;
+};
+
+/* The size in bits of the FLL divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_FLL_SIZE ((1 << 16) * 10)
+
+static struct {
+ unsigned int min;
+ unsigned int max;
+ u16 fll_fratio;
+ int ratio;
+} fll_fratios[] = {
+ { 0, 64000, 4, 16 },
+ { 64000, 128000, 3, 8 },
+ { 128000, 256000, 2, 4 },
+ { 256000, 1000000, 1, 2 },
+ { 1000000, 13500000, 0, 1 },
+};
+
+static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
+ unsigned int Fout)
+{
+ u64 Kpart;
+ unsigned int K, Ndiv, Nmod, target;
+ unsigned int div;
+ int i;
+
+ /* Fref must be <=13.5MHz */
+ div = 1;
+ while ((Fref / div) > 13500000) {
+ div *= 2;
+
+ if (div > 8) {
+ pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
+ Fref);
+ return -EINVAL;
+ }
+ }
+
+ pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
+
+ /* Apply the division for our remaining calculations */
+ Fref /= div;
+
+ /* Fvco should be 90-100MHz; don't check the upper bound */
+ div = 0;
+ target = Fout * 2;
+ while (target < 90000000) {
+ div++;
+ target *= 2;
+ if (div > 7) {
+ pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
+ Fout);
+ return -EINVAL;
+ }
+ }
+ fll_div->fll_outdiv = div;
+
+ pr_debug("Fvco=%dHz\n", target);
+
+ /* Find an appropraite FLL_FRATIO and factor it out of the target */
+ for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
+ if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
+ fll_div->fll_fratio = fll_fratios[i].fll_fratio;
+ target /= fll_fratios[i].ratio;
+ break;
+ }
+ }
+ if (i == ARRAY_SIZE(fll_fratios)) {
+ pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
+ return -EINVAL;
+ }
+
+ /* Now, calculate N.K */
+ Ndiv = target / Fref;
+
+ fll_div->n = Ndiv;
+ Nmod = target % Fref;
+ pr_debug("Nmod=%d\n", Nmod);
+
+ /* Calculate fractional part - scale up so we can round. */
+ Kpart = FIXED_FLL_SIZE * (long long)Nmod;
+
+ do_div(Kpart, Fref);
+
+ K = Kpart & 0xFFFFFFFF;
+
+ if ((K % 10) >= 5)
+ K += 5;
+
+ /* Move down to proper range now rounding is done */
+ fll_div->k = K / 10;
+
+ pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
+ fll_div->n, fll_div->k,
+ fll_div->fll_fratio, fll_div->fll_outdiv,
+ fll_div->fll_clk_ref_div);
+
+ return 0;
+}
+
+static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id,
+ unsigned int Fref, unsigned int Fout)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ u16 reg1, reg4, reg5;
+ struct _fll_div fll_div;
+ int ret;
+
+ /* Any change? */
+ if (Fref == wm8993->fll_fref && Fout == wm8993->fll_fout)
+ return 0;
+
+ /* Disable the FLL */
+ if (Fout == 0) {
+ dev_dbg(codec->dev, "FLL disabled\n");
+ wm8993->fll_fref = 0;
+ wm8993->fll_fout = 0;
+
+ reg1 = wm8993_read(codec, WM8993_FLL_CONTROL_1);
+ reg1 &= ~WM8993_FLL_ENA;
+ wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+
+ return 0;
+ }
+
+ ret = fll_factors(&fll_div, Fref, Fout);
+ if (ret != 0)
+ return ret;
+
+ reg5 = wm8993_read(codec, WM8993_FLL_CONTROL_5);
+ reg5 &= ~WM8993_FLL_CLK_SRC_MASK;
+
+ switch (fll_id) {
+ case WM8993_FLL_MCLK:
+ break;
+
+ case WM8993_FLL_LRCLK:
+ reg5 |= 1;
+ break;
+
+ case WM8993_FLL_BCLK:
+ reg5 |= 2;
+ break;
+
+ default:
+ dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
+ return -EINVAL;
+ }
+
+ /* Any FLL configuration change requires that the FLL be
+ * disabled first. */
+ reg1 = wm8993_read(codec, WM8993_FLL_CONTROL_1);
+ reg1 &= ~WM8993_FLL_ENA;
+ wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+
+ /* Apply the configuration */
+ if (fll_div.k)
+ reg1 |= WM8993_FLL_FRAC_MASK;
+ else
+ reg1 &= ~WM8993_FLL_FRAC_MASK;
+ wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1);
+
+ wm8993_write(codec, WM8993_FLL_CONTROL_2,
+ (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) |
+ (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT));
+ wm8993_write(codec, WM8993_FLL_CONTROL_3, fll_div.k);
+
+ reg4 = wm8993_read(codec, WM8993_FLL_CONTROL_4);
+ reg4 &= ~WM8993_FLL_N_MASK;
+ reg4 |= fll_div.n << WM8993_FLL_N_SHIFT;
+ wm8993_write(codec, WM8993_FLL_CONTROL_4, reg4);
+
+ reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK;
+ reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT;
+ wm8993_write(codec, WM8993_FLL_CONTROL_5, reg5);
+
+ /* Enable the FLL */
+ wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA);
+
+ dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout);
+
+ wm8993->fll_fref = Fref;
+ wm8993->fll_fout = Fout;
+
+ return 0;
+}
+
+static int configure_clock(struct snd_soc_codec *codec)
+{
+ struct wm8993_priv *wm8993 = codec->private_data;
+ unsigned int reg;
+
+ /* This should be done on init() for bypass paths */
+ switch (wm8993->sysclk_source) {
+ case WM8993_SYSCLK_MCLK:
+ dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8993->mclk_rate);
+
+ reg = wm8993_read(codec, WM8993_CLOCKING_2);
+ reg &= ~WM8993_SYSCLK_SRC;
+ if (wm8993->mclk_rate > 13500000) {
+ reg |= WM8993_MCLK_DIV;
+ wm8993->sysclk_rate = wm8993->mclk_rate / 2;
+ } else {
+ reg &= ~WM8993_MCLK_DIV;
+ wm8993->sysclk_rate = wm8993->mclk_rate;
+ }
+ reg &= ~WM8993_MCLK_DIV;
+ reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC);
+ wm8993_write(codec, WM8993_CLOCKING_2, reg);
+ break;
+
+ case WM8993_SYSCLK_FLL:
+ dev_dbg(codec->dev, "Using %dHz FLL clock\n",
+ wm8993->fll_fout);
+
+ reg = wm8993_read(codec, WM8993_CLOCKING_2);
+ reg |= WM8993_SYSCLK_SRC;
+ if (wm8993->fll_fout > 13500000) {
+ reg |= WM8993_MCLK_DIV;
+ wm8993->sysclk_rate = wm8993->fll_fout / 2;
+ } else {
+ reg &= ~WM8993_MCLK_DIV;
+ wm8993->sysclk_rate = wm8993->fll_fout;
+ }
+ wm8993_write(codec, WM8993_CLOCKING_2, reg);
+ break;
+
+ default:
+ dev_err(codec->dev, "System clock not configured\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm8993->sysclk_rate);
+
+ return 0;
+}
+
+static void wait_for_dc_servo(struct snd_soc_codec *codec, int mask)
+{
+ unsigned int reg;
+ int count = 0;
+
+ dev_dbg(codec->dev, "Waiting for DC servo...\n");
+ do {
+ count++;
+ msleep(1);
+ reg = wm8993_read(codec, WM8993_DC_SERVO_READBACK_0);
+ dev_dbg(codec->dev, "DC servo status: %x\n", reg);
+ } while ((reg & WM8993_DCS_CAL_COMPLETE_MASK)
+ != WM8993_DCS_CAL_COMPLETE_MASK && count < 1000);
+
+ if ((reg & WM8993_DCS_CAL_COMPLETE_MASK)
+ != WM8993_DCS_CAL_COMPLETE_MASK)
+ dev_err(codec->dev, "Timed out waiting for DC Servo\n");
+}
+
+static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1650, 150, 0);
+static const DECLARE_TLV_DB_SCALE(inmix_sw_tlv, 0, 3000, 0);
+static const DECLARE_TLV_DB_SCALE(inmix_tlv, -1500, 300, 1);
+static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
+static const DECLARE_TLV_DB_SCALE(drc_comp_threash, -4500, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_comp_amp, -2250, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_min_tlv, -1800, 600, 0);
+static const unsigned int drc_max_tlv[] = {
+ TLV_DB_RANGE_HEAD(4),
+ 0, 2, TLV_DB_SCALE_ITEM(1200, 600, 0),
+ 3, 3, TLV_DB_SCALE_ITEM(3600, 0, 0),
+};
+static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
+static const DECLARE_TLV_DB_SCALE(drc_startup_tlv, -1800, 300, 0);
+static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
+static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
+static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
+static const DECLARE_TLV_DB_SCALE(earpiece_tlv, -600, 600, 0);
+static const DECLARE_TLV_DB_SCALE(outmix_tlv, -2100, 300, 0);
+static const DECLARE_TLV_DB_SCALE(spkmix_tlv, -300, 300, 0);
+static const DECLARE_TLV_DB_SCALE(spkmixout_tlv, -1800, 600, 1);
+static const DECLARE_TLV_DB_SCALE(outpga_tlv, -5700, 100, 0);
+static const unsigned int spkboost_tlv[] = {
+ TLV_DB_RANGE_HEAD(7),
+ 0, 6, TLV_DB_SCALE_ITEM(0, 150, 0),
+ 7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0),
+};
+static const DECLARE_TLV_DB_SCALE(line_tlv, -600, 600, 0);
+
+static const char *speaker_ref_text[] = {
+ "SPKVDD/2",
+ "VMID",
+};
+
+static const struct soc_enum speaker_ref =
+ SOC_ENUM_SINGLE(WM8993_SPEAKER_MIXER, 8, 2, speaker_ref_text);
+
+static const char *speaker_mode_text[] = {
+ "Class D",
+ "Class AB",
+};
+
+static const struct soc_enum speaker_mode =
+ SOC_ENUM_SINGLE(WM8993_SPKMIXR_ATTENUATION, 8, 2, speaker_mode_text);
+
+static const char *dac_deemph_text[] = {
+ "None",
+ "32kHz",
+ "44.1kHz",
+ "48kHz",
+};
+
+static const struct soc_enum dac_deemph =
+ SOC_ENUM_SINGLE(WM8993_DAC_CTRL, 4, 4, dac_deemph_text);
+
+static const char *adc_hpf_text[] = {
+ "Hi-Fi",
+ "Voice 1",
+ "Voice 2",
+ "Voice 3",
+};
+
+static const struct soc_enum adc_hpf =
+ SOC_ENUM_SINGLE(WM8993_ADC_CTRL, 5, 4, adc_hpf_text);
+
+static const char *drc_path_text[] = {
+ "ADC",
+ "DAC"
+};
+
+static const struct soc_enum drc_path =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 14, 2, drc_path_text);
+
+static const char *drc_r0_text[] = {
+ "1",
+ "1/2",
+ "1/4",
+ "1/8",
+ "1/16",
+ "0",
+};
+
+static const struct soc_enum drc_r0 =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 8, 6, drc_r0_text);
+
+static const char *drc_r1_text[] = {
+ "1",
+ "1/2",
+ "1/4",
+ "1/8",
+ "0",
+};
+
+static const struct soc_enum drc_r1 =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_4, 13, 5, drc_r1_text);
+
+static const char *drc_attack_text[] = {
+ "Reserved",
+ "181us",
+ "363us",
+ "726us",
+ "1.45ms",
+ "2.9ms",
+ "5.8ms",
+ "11.6ms",
+ "23.2ms",
+ "46.4ms",
+ "92.8ms",
+ "185.6ms",
+};
+
+static const struct soc_enum drc_attack =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 12, 12, drc_attack_text);
+
+static const char *drc_decay_text[] = {
+ "186ms",
+ "372ms",
+ "743ms",
+ "1.49s",
+ "2.97ms",
+ "5.94ms",
+ "11.89ms",
+ "23.78ms",
+ "47.56ms",
+};
+
+static const struct soc_enum drc_decay =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_2, 8, 9, drc_decay_text);
+
+static const char *drc_ff_text[] = {
+ "5 samples",
+ "9 samples",
+};
+
+static const struct soc_enum drc_ff =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 7, 2, drc_ff_text);
+
+static const char *drc_qr_rate_text[] = {
+ "0.725ms",
+ "1.45ms",
+ "5.8ms",
+};
+
+static const struct soc_enum drc_qr_rate =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_3, 0, 3, drc_qr_rate_text);
+
+static const char *drc_smooth_text[] = {
+ "Low",
+ "Medium",
+ "High",
+};
+
+static const struct soc_enum drc_smooth =
+ SOC_ENUM_SINGLE(WM8993_DRC_CONTROL_1, 4, 3, drc_smooth_text);
+
+
+/*
+ * Update the DC servo calibration on gain changes
+ */
+static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ int ret;
+
+ ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
+
+ /* Only need to do this if the outputs are active */
+ if (wm8993_read(codec, WM8993_POWER_MANAGEMENT_1)
+ & (WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA))
+ snd_soc_update_bits(codec,
+ WM8993_DC_SERVO_0,
+ WM8993_DCS_TRIG_SINGLE_0 |
+ WM8993_DCS_TRIG_SINGLE_1,
+ WM8993_DCS_TRIG_SINGLE_0 |
+ WM8993_DCS_TRIG_SINGLE_1);
+
+ return ret;
+}
+
+static const struct snd_kcontrol_new wm8993_snd_controls[] = {
+SOC_SINGLE_TLV("IN1L Volume", WM8993_LEFT_LINE_INPUT_1_2_VOLUME, 0, 31, 0,
+ inpga_tlv),
+SOC_SINGLE("IN1L Switch", WM8993_LEFT_LINE_INPUT_1_2_VOLUME, 7, 1, 1),
+SOC_SINGLE("IN1L ZC Switch", WM8993_LEFT_LINE_INPUT_1_2_VOLUME, 7, 1, 0),
+
+SOC_SINGLE_TLV("IN1R Volume", WM8993_RIGHT_LINE_INPUT_1_2_VOLUME, 0, 31, 0,
+ inpga_tlv),
+SOC_SINGLE("IN1R Switch", WM8993_RIGHT_LINE_INPUT_1_2_VOLUME, 7, 1, 1),
+SOC_SINGLE("IN1R ZC Switch", WM8993_RIGHT_LINE_INPUT_1_2_VOLUME, 7, 1, 0),
+
+
+SOC_SINGLE_TLV("IN2L Volume", WM8993_LEFT_LINE_INPUT_3_4_VOLUME, 0, 31, 0,
+ inpga_tlv),
+SOC_SINGLE("IN2L Switch", WM8993_LEFT_LINE_INPUT_3_4_VOLUME, 7, 1, 1),
+SOC_SINGLE("IN2L ZC Switch", WM8993_LEFT_LINE_INPUT_3_4_VOLUME, 7, 1, 0),
+
+SOC_SINGLE_TLV("IN2R Volume", WM8993_RIGHT_LINE_INPUT_3_4_VOLUME, 0, 31, 0,
+ inpga_tlv),
+SOC_SINGLE("IN2R Switch", WM8993_RIGHT_LINE_INPUT_3_4_VOLUME, 7, 1, 1),
+SOC_SINGLE("IN2R ZC Switch", WM8993_RIGHT_LINE_INPUT_3_4_VOLUME, 7, 1, 0),
+
+SOC_SINGLE_TLV("MIXINL IN2L Volume", WM8993_INPUT_MIXER3, 7, 1, 0,
+ inmix_sw_tlv),
+SOC_SINGLE_TLV("MIXINL IN1L Volume", WM8993_INPUT_MIXER3, 4, 1, 0,
+ inmix_sw_tlv),
+SOC_SINGLE_TLV("MIXINL Output Record Volume", WM8993_INPUT_MIXER3, 0, 7, 0,
+ inmix_tlv),
+SOC_SINGLE_TLV("MIXINL IN1LP Volume", WM8993_INPUT_MIXER5, 6, 7, 0, inmix_tlv),
+SOC_SINGLE_TLV("MIXINL Direct Voice Volume", WM8993_INPUT_MIXER5, 0, 6, 0,
+ inmix_tlv),
+
+SOC_SINGLE_TLV("MIXINR IN2R Volume", WM8993_INPUT_MIXER4, 7, 1, 0,
+ inmix_sw_tlv),
+SOC_SINGLE_TLV("MIXINR IN1R Volume", WM8993_INPUT_MIXER4, 4, 1, 0,
+ inmix_sw_tlv),
+SOC_SINGLE_TLV("MIXINR Output Record Volume", WM8993_INPUT_MIXER4, 0, 7, 0,
+ inmix_tlv),
+SOC_SINGLE_TLV("MIXINR IN1RP Volume", WM8993_INPUT_MIXER6, 6, 7, 0, inmix_tlv),
+SOC_SINGLE_TLV("MIXINR Direct Voice Volume", WM8993_INPUT_MIXER6, 0, 6, 0,
+ inmix_tlv),
+
+SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8993_DIGITAL_SIDE_TONE,
+ 5, 9, 12, 0, sidetone_tlv),
+
+SOC_SINGLE("DRC Switch", WM8993_DRC_CONTROL_1, 15, 1, 0),
+SOC_ENUM("DRC Path", drc_path),
+SOC_SINGLE_TLV("DRC Compressor Threashold Volume", WM8993_DRC_CONTROL_2,
+ 2, 60, 1, drc_comp_threash),
+SOC_SINGLE_TLV("DRC Compressor Amplitude Volume", WM8993_DRC_CONTROL_3,
+ 11, 30, 1, drc_comp_amp),
+SOC_ENUM("DRC R0", drc_r0),
+SOC_ENUM("DRC R1", drc_r1),
+SOC_SINGLE_TLV("DRC Minimum Volume", WM8993_DRC_CONTROL_1, 2, 3, 1,
+ drc_min_tlv),
+SOC_SINGLE_TLV("DRC Maximum Volume", WM8993_DRC_CONTROL_1, 0, 3, 0,
+ drc_max_tlv),
+SOC_ENUM("DRC Attack Rate", drc_attack),
+SOC_ENUM("DRC Decay Rate", drc_decay),
+SOC_ENUM("DRC FF Delay", drc_ff),
+SOC_SINGLE("DRC Anti-clip Switch", WM8993_DRC_CONTROL_1, 9, 1, 0),
+SOC_SINGLE("DRC Quick Release Switch", WM8993_DRC_CONTROL_1, 10, 1, 0),
+SOC_SINGLE_TLV("DRC Quick Release Volume", WM8993_DRC_CONTROL_3, 2, 3, 0,
+ drc_qr_tlv),
+SOC_ENUM("DRC Quick Release Rate", drc_qr_rate),
+SOC_SINGLE("DRC Smoothing Switch", WM8993_DRC_CONTROL_1, 11, 1, 0),
+SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8993_DRC_CONTROL_1, 8, 1, 0),
+SOC_ENUM("DRC Smoothing Hysteresis Threashold", drc_smooth),
+SOC_SINGLE_TLV("DRC Startup Volume", WM8993_DRC_CONTROL_4, 8, 18, 0,
+ drc_startup_tlv),
+
+SOC_SINGLE("EQ Switch", WM8993_EQ1, 0, 1, 0),
+
+SOC_DOUBLE_R_TLV("Capture Volume", WM8993_LEFT_ADC_DIGITAL_VOLUME,
+ WM8993_RIGHT_ADC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
+SOC_SINGLE("ADC High Pass Filter Switch", WM8993_ADC_CTRL, 8, 1, 0),
+SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
+
+SOC_DOUBLE_R_TLV("Playback Volume", WM8993_LEFT_DAC_DIGITAL_VOLUME,
+ WM8993_RIGHT_DAC_DIGITAL_VOLUME, 1, 96, 0, digital_tlv),
+SOC_SINGLE_TLV("Playback Boost Volume", WM8993_AUDIO_INTERFACE_2, 10, 3, 0,
+ dac_boost_tlv),
+SOC_ENUM("DAC Deemphasis", dac_deemph),
+
+SOC_SINGLE_TLV("Left Output Mixer IN2RN Volume", WM8993_OUTPUT_MIXER5, 6, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer IN2LN Volume", WM8993_OUTPUT_MIXER3, 6, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer IN2LP Volume", WM8993_OUTPUT_MIXER3, 9, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer IN1L Volume", WM8993_OUTPUT_MIXER3, 0, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer IN1R Volume", WM8993_OUTPUT_MIXER3, 3, 7, 1,
+ outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer Right Input Volume",
+ WM8993_OUTPUT_MIXER5, 3, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer Left Input Volume",
+ WM8993_OUTPUT_MIXER5, 0, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Left Output Mixer DAC Volume", WM8993_OUTPUT_MIXER5, 9, 7, 1,
+ outmix_tlv),
+
+SOC_SINGLE_TLV("Right Output Mixer IN2LN Volume",
+ WM8993_OUTPUT_MIXER6, 6, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer IN2RN Volume",
+ WM8993_OUTPUT_MIXER4, 6, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer IN1L Volume",
+ WM8993_OUTPUT_MIXER4, 3, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer IN1R Volume",
+ WM8993_OUTPUT_MIXER4, 0, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer IN2RP Volume",
+ WM8993_OUTPUT_MIXER4, 9, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer Left Input Volume",
+ WM8993_OUTPUT_MIXER6, 3, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer Right Input Volume",
+ WM8993_OUTPUT_MIXER6, 6, 7, 1, outmix_tlv),
+SOC_SINGLE_TLV("Right Output Mixer DAC Volume",
+ WM8993_OUTPUT_MIXER6, 9, 7, 1, outmix_tlv),
+
+SOC_DOUBLE_R_TLV("Output Volume", WM8993_LEFT_OPGA_VOLUME,
+ WM8993_RIGHT_OPGA_VOLUME, 0, 63, 0, outpga_tlv),
+SOC_DOUBLE_R("Output Switch", WM8993_LEFT_OPGA_VOLUME,
+ WM8993_RIGHT_OPGA_VOLUME, 6, 1, 0),
+SOC_DOUBLE_R("Output ZC Switch", WM8993_LEFT_OPGA_VOLUME,
+ WM8993_RIGHT_OPGA_VOLUME, 7, 1, 0),
+
+SOC_SINGLE("Earpiece Switch", WM8993_HPOUT2_VOLUME, 5, 1, 1),
+SOC_SINGLE_TLV("Earpiece Volume", WM8993_HPOUT2_VOLUME, 4, 1, 1, earpiece_tlv),
+
+SOC_SINGLE_TLV("SPKL Input Volume", WM8993_SPKMIXL_ATTENUATION,
+ 5, 1, 1, spkmix_tlv),
+SOC_SINGLE_TLV("SPKL IN1LP Volume", WM8993_SPKMIXL_ATTENUATION,
+ 4, 1, 1, spkmix_tlv),
+SOC_SINGLE_TLV("SPKL Output Volume", WM8993_SPKMIXL_ATTENUATION,
+ 3, 1, 1, spkmix_tlv),
+SOC_SINGLE_TLV("SPKL DAC Volume", WM8993_SPKMIXL_ATTENUATION,
+ 2, 1, 1, spkmix_tlv),
+
+SOC_SINGLE_TLV("SPKR Input Volume", WM8993_SPKMIXR_ATTENUATION,
+ 5, 1, 1, spkmix_tlv),
+SOC_SINGLE_TLV("SPKR IN1RP Volume", WM8993_SPKMIXR_ATTENUATION,
+ 4, 1, 1, spkmix_tlv),
+SOC_SINGLE_TLV("SPKR Output Volume", WM8993_SPKMIXR_ATTENUATION,
+ 3, 1, 1, spkmix_tlv),
+SOC_SINGLE_TLV("SPKR DAC Volume", WM8993_SPKMIXR_ATTENUATION,
+ 2, 1, 1, spkmix_tlv),
+
+SOC_DOUBLE_R_TLV("Speaker Mixer Volume",
+ WM8993_SPKMIXL_ATTENUATION, WM8993_SPKMIXR_ATTENUATION,
+ 0, 3, 1, spkmixout_tlv),
+SOC_DOUBLE_R_TLV("Speaker Volume",
+ WM8993_SPEAKER_VOLUME_LEFT, WM8993_SPEAKER_VOLUME_RIGHT,
+ 0, 63, 0, outpga_tlv),
+SOC_DOUBLE_R("Speaker Switch",
+ WM8993_SPEAKER_VOLUME_LEFT, WM8993_SPEAKER_VOLUME_RIGHT,
+ 6, 1, 0),
+SOC_DOUBLE_R("Speaker ZC Switch",
+ WM8993_SPEAKER_VOLUME_LEFT, WM8993_SPEAKER_VOLUME_RIGHT,
+ 7, 1, 0),
+SOC_DOUBLE_TLV("Speaker Boost Volume", WM8993_SPKOUT_BOOST, 0, 3, 7, 0,
+ spkboost_tlv),
+SOC_ENUM("Speaker Reference", speaker_ref),
+SOC_ENUM("Speaker Mode", speaker_mode),
+
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Headphone Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+ SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .tlv.p = outpga_tlv,
+ .info = snd_soc_info_volsw_2r,
+ .get = snd_soc_get_volsw_2r, .put = wm8993_put_dc_servo,
+ .private_value = (unsigned long)&(struct soc_mixer_control) {
+ .reg = WM8993_LEFT_OUTPUT_VOLUME,
+ .rreg = WM8993_RIGHT_OUTPUT_VOLUME,
+ .shift = 0, .max = 63
+ },
+},
+SOC_DOUBLE_R("Headphone Switch", WM8993_LEFT_OUTPUT_VOLUME,
+ WM8993_RIGHT_OUTPUT_VOLUME, 6, 1, 0),
+SOC_DOUBLE_R("Headphone ZC Switch", WM8993_LEFT_OUTPUT_VOLUME,
+ WM8993_RIGHT_OUTPUT_VOLUME, 7, 1, 0),
+
+SOC_SINGLE("LINEOUT1N Switch", WM8993_LINE_OUTPUTS_VOLUME, 6, 1, 1),
+SOC_SINGLE("LINEOUT1P Switch", WM8993_LINE_OUTPUTS_VOLUME, 5, 1, 1),
+SOC_SINGLE_TLV("LINEOUT1 Volume", WM8993_LINE_OUTPUTS_VOLUME, 4, 1, 1,
+ line_tlv),
+
+SOC_SINGLE("LINEOUT2N Switch", WM8993_LINE_OUTPUTS_VOLUME, 2, 1, 1),
+SOC_SINGLE("LINEOUT2P Switch", WM8993_LINE_OUTPUTS_VOLUME, 1, 1, 1),
+SOC_SINGLE_TLV("LINEOUT2 Volume", WM8993_LINE_OUTPUTS_VOLUME, 0, 1, 1,
+ line_tlv),
+};
+
+static const struct snd_kcontrol_new wm8993_eq_controls[] = {
+SOC_SINGLE_TLV("EQ1 Volume", WM8993_EQ2, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ2 Volume", WM8993_EQ3, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ3 Volume", WM8993_EQ4, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ4 Volume", WM8993_EQ5, 0, 24, 0, eq_tlv),
+SOC_SINGLE_TLV("EQ5 Volume", WM8993_EQ6, 0, 24, 0, eq_tlv),
+};
+
+static int wm8993_earpiece_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *control, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ u16 reg = wm8993_read(codec, WM8993_ANTIPOP1) & ~WM8993_HPOUT2_IN_ENA;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ reg |= WM8993_HPOUT2_IN_ENA;
+ wm8993_write(codec, WM8993_ANTIPOP1, reg);
+ udelay(50);
+ break;
+
+ case SND_SOC_DAPM_POST_PMD:
+ wm8993_write(codec, WM8993_ANTIPOP1, reg);
+ break;
+
+ default:
+ BUG();
+ break;
+ }
+
+ return 0;
+}
+
+static int clk_sys_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ return configure_clock(codec);
+
+ case SND_SOC_DAPM_POST_PMD:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * When used with DAC outputs only the WM8993 charge pump supports
+ * operation in class W mode, providing very low power consumption
+ * when used with digital sources. Enable and disable this mode
+ * automatically depending on the mixer configuration.
+ *
+ * Currently the only supported paths are the direct DAC->headphone
+ * paths (which provide minimum power consumption anyway).
+ */
+static int wm8993_class_w_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
+ struct snd_soc_codec *codec = widget->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ int ret;
+
+ /* Turn it off if we're using the main output mixer */
+ if (ucontrol->value.integer.value[0] == 0) {
+ if (wm8993->class_w_users == 0) {
+ dev_dbg(codec->dev, "Disabling Class W\n");
+ snd_soc_update_bits(codec, WM8993_CLASS_W_0,
+ WM8993_CP_DYN_FREQ |
+ WM8993_CP_DYN_V,
+ 0);
+ }
+ wm8993->class_w_users++;
+ }
+
+ /* Implement the change */
+ ret = snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
+
+ /* Enable it if we're using the direct DAC path */
+ if (ucontrol->value.integer.value[0] == 1) {
+ if (wm8993->class_w_users == 1) {
+ dev_dbg(codec->dev, "Enabling Class W\n");
+ snd_soc_update_bits(codec, WM8993_CLASS_W_0,
+ WM8993_CP_DYN_FREQ |
+ WM8993_CP_DYN_V,
+ WM8993_CP_DYN_FREQ |
+ WM8993_CP_DYN_V);
+ }
+ wm8993->class_w_users--;
+ }
+
+ dev_dbg(codec->dev, "Indirect DAC use count now %d\n",
+ wm8993->class_w_users);
+
+ return ret;
+}
+
+#define SOC_DAPM_ENUM_W(xname, xenum) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .info = snd_soc_info_enum_double, \
+ .get = snd_soc_dapm_get_enum_double, \
+ .put = wm8993_class_w_put, \
+ .private_value = (unsigned long)&xenum }
+
+static int hp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ unsigned int reg = wm8993_read(codec, WM8993_ANALOGUE_HP_0);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ snd_soc_update_bits(codec, WM8993_CHARGE_PUMP_1,
+ WM8993_CP_ENA, WM8993_CP_ENA);
+
+ msleep(5);
+
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA,
+ WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA);
+
+ reg |= WM8993_HPOUT1L_DLY | WM8993_HPOUT1R_DLY;
+ wm8993_write(codec, WM8993_ANALOGUE_HP_0, reg);
+
+ /* Start the DC servo */
+ snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
+ WM8993_DCS_ENA_CHAN_0 |
+ WM8993_DCS_ENA_CHAN_1 |
+ WM8993_DCS_TRIG_STARTUP_1 |
+ WM8993_DCS_TRIG_STARTUP_0,
+ WM8993_DCS_ENA_CHAN_0 |
+ WM8993_DCS_ENA_CHAN_1 |
+ WM8993_DCS_TRIG_STARTUP_1 |
+ WM8993_DCS_TRIG_STARTUP_0);
+ wait_for_dc_servo(codec, WM8993_DCS_TRIG_STARTUP_0 |
+ WM8993_DCS_TRIG_STARTUP_1);
+ snd_soc_update_bits(codec, WM8993_DC_SERVO_1,
+ WM8993_DCS_TIMER_PERIOD_01_MASK, 0xa);
+
+ reg |= WM8993_HPOUT1R_OUTP | WM8993_HPOUT1R_RMV_SHORT |
+ WM8993_HPOUT1L_OUTP | WM8993_HPOUT1L_RMV_SHORT;
+ wm8993_write(codec, WM8993_ANALOGUE_HP_0, reg);
+ break;
+
+ case SND_SOC_DAPM_PRE_PMD:
+ reg &= ~(WM8993_HPOUT1L_RMV_SHORT |
+ WM8993_HPOUT1L_DLY |
+ WM8993_HPOUT1L_OUTP |
+ WM8993_HPOUT1R_RMV_SHORT |
+ WM8993_HPOUT1R_DLY |
+ WM8993_HPOUT1R_OUTP);
+
+ snd_soc_update_bits(codec, WM8993_DC_SERVO_1,
+ WM8993_DCS_TIMER_PERIOD_01_MASK, 0);
+ snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
+ WM8993_DCS_ENA_CHAN_0 |
+ WM8993_DCS_ENA_CHAN_1, 0);
+
+ wm8993_write(codec, WM8993_ANALOGUE_HP_0, reg);
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA,
+ 0);
+
+ snd_soc_update_bits(codec, WM8993_CHARGE_PUMP_1,
+ WM8993_CP_ENA, 0);
+ break;
+ }
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new in1l_pga[] = {
+SOC_DAPM_SINGLE("IN1LP Switch", WM8993_INPUT_MIXER2, 5, 1, 0),
+SOC_DAPM_SINGLE("IN1LN Switch", WM8993_INPUT_MIXER2, 4, 1, 0),
+};
+
+static const struct snd_kcontrol_new in1r_pga[] = {
+SOC_DAPM_SINGLE("IN1RP Switch", WM8993_INPUT_MIXER2, 1, 1, 0),
+SOC_DAPM_SINGLE("IN1RN Switch", WM8993_INPUT_MIXER2, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new in2l_pga[] = {
+SOC_DAPM_SINGLE("IN2LP Switch", WM8993_INPUT_MIXER2, 7, 1, 0),
+SOC_DAPM_SINGLE("IN2LN Switch", WM8993_INPUT_MIXER2, 6, 1, 0),
+};
+
+static const struct snd_kcontrol_new in2r_pga[] = {
+SOC_DAPM_SINGLE("IN2RP Switch", WM8993_INPUT_MIXER2, 3, 1, 0),
+SOC_DAPM_SINGLE("IN2RN Switch", WM8993_INPUT_MIXER2, 2, 1, 0),
+};
+
+static const struct snd_kcontrol_new mixinl[] = {
+SOC_DAPM_SINGLE("IN2L Switch", WM8993_INPUT_MIXER3, 8, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_INPUT_MIXER3, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new mixinr[] = {
+SOC_DAPM_SINGLE("IN2R Switch", WM8993_INPUT_MIXER4, 8, 1, 0),
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_INPUT_MIXER4, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new left_output_mixer[] = {
+SOC_DAPM_SINGLE("Right Input Switch", WM8993_OUTPUT_MIXER1, 7, 1, 0),
+SOC_DAPM_SINGLE("Left Input Switch", WM8993_OUTPUT_MIXER1, 6, 1, 0),
+SOC_DAPM_SINGLE("IN2RN Switch", WM8993_OUTPUT_MIXER1, 5, 1, 0),
+SOC_DAPM_SINGLE("IN2LN Switch", WM8993_OUTPUT_MIXER1, 4, 1, 0),
+SOC_DAPM_SINGLE("IN2LP Switch", WM8993_OUTPUT_MIXER1, 1, 1, 0),
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_OUTPUT_MIXER1, 3, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_OUTPUT_MIXER1, 2, 1, 0),
+SOC_DAPM_SINGLE("DAC Switch", WM8993_OUTPUT_MIXER1, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_output_mixer[] = {
+SOC_DAPM_SINGLE("Left Input Switch", WM8993_OUTPUT_MIXER2, 7, 1, 0),
+SOC_DAPM_SINGLE("Right Input Switch", WM8993_OUTPUT_MIXER2, 6, 1, 0),
+SOC_DAPM_SINGLE("IN2LN Switch", WM8993_OUTPUT_MIXER2, 5, 1, 0),
+SOC_DAPM_SINGLE("IN2RN Switch", WM8993_OUTPUT_MIXER2, 4, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_OUTPUT_MIXER2, 3, 1, 0),
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_OUTPUT_MIXER2, 2, 1, 0),
+SOC_DAPM_SINGLE("IN2RP Switch", WM8993_OUTPUT_MIXER2, 1, 1, 0),
+SOC_DAPM_SINGLE("DAC Switch", WM8993_OUTPUT_MIXER2, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new earpiece_mixer[] = {
+SOC_DAPM_SINGLE("Direct Voice Switch", WM8993_HPOUT2_MIXER, 5, 1, 0),
+SOC_DAPM_SINGLE("Left Output Switch", WM8993_HPOUT2_MIXER, 4, 1, 0),
+SOC_DAPM_SINGLE("Right Output Switch", WM8993_HPOUT2_MIXER, 3, 1, 0),
+};
+
+static const struct snd_kcontrol_new left_speaker_mixer[] = {
+SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 7, 1, 0),
+SOC_DAPM_SINGLE("IN1LP Switch", WM8993_SPEAKER_MIXER, 5, 1, 0),
+SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 3, 1, 0),
+SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_speaker_mixer[] = {
+SOC_DAPM_SINGLE("Input Switch", WM8993_SPEAKER_MIXER, 6, 1, 0),
+SOC_DAPM_SINGLE("IN1RP Switch", WM8993_SPEAKER_MIXER, 4, 1, 0),
+SOC_DAPM_SINGLE("Output Switch", WM8993_SPEAKER_MIXER, 2, 1, 0),
+SOC_DAPM_SINGLE("DAC Switch", WM8993_SPEAKER_MIXER, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new left_speaker_boost[] = {
+SOC_DAPM_SINGLE("Direct Voice Switch", WM8993_SPKOUT_MIXERS, 5, 1, 0),
+SOC_DAPM_SINGLE("SPKL Switch", WM8993_SPKOUT_MIXERS, 4, 1, 0),
+SOC_DAPM_SINGLE("SPKR Switch", WM8993_SPKOUT_MIXERS, 3, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_speaker_boost[] = {
+SOC_DAPM_SINGLE("Direct Voice Switch", WM8993_SPKOUT_MIXERS, 2, 1, 0),
+SOC_DAPM_SINGLE("SPKL Switch", WM8993_SPKOUT_MIXERS, 1, 1, 0),
+SOC_DAPM_SINGLE("SPKR Switch", WM8993_SPKOUT_MIXERS, 0, 1, 0),
+};
+
+static const char *hp_mux_text[] = {
+ "Mixer",
+ "DAC",
+};
+
+static const struct soc_enum hpl_enum =
+ SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER1, 8, 2, hp_mux_text);
+
+static const struct snd_kcontrol_new hpl_mux =
+ SOC_DAPM_ENUM_W("Left Headphone Mux", hpl_enum);
+
+static const struct soc_enum hpr_enum =
+ SOC_ENUM_SINGLE(WM8993_OUTPUT_MIXER2, 8, 2, hp_mux_text);
+
+static const struct snd_kcontrol_new hpr_mux =
+ SOC_DAPM_ENUM_W("Right Headphone Mux", hpr_enum);
+
+static const struct snd_kcontrol_new line1_mix[] = {
+SOC_DAPM_SINGLE("IN1R Switch", WM8993_LINE_MIXER1, 2, 1, 0),
+SOC_DAPM_SINGLE("IN1L Switch", WM8993_LINE_MIXER1, 1, 1, 0),
+SOC_DAPM_SINGLE("Output Switch", WM8993_LINE_MIXER1, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new line1n_mix[] = {
+SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER1, 6, 1, 0),
+SOC_DAPM_SINGLE("Right Output Switch", WM8993_LINE_MIXER1, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new line1p_mix[] = {
+SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER1, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new line2_mix[] = {
+SOC_DAPM_SINGLE("IN2R Switch", WM8993_LINE_MIXER2, 2, 1, 0),
+SOC_DAPM_SINGLE("IN2L Switch", WM8993_LINE_MIXER2, 1, 1, 0),
+SOC_DAPM_SINGLE("Output Switch", WM8993_LINE_MIXER2, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new line2n_mix[] = {
+SOC_DAPM_SINGLE("Left Output Switch", WM8993_LINE_MIXER2, 6, 1, 0),
+SOC_DAPM_SINGLE("Right Output Switch", WM8993_LINE_MIXER2, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new line2p_mix[] = {
+SOC_DAPM_SINGLE("Right Output Switch", WM8993_LINE_MIXER2, 0, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8993_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("IN1LN"),
+SND_SOC_DAPM_INPUT("IN1LP"),
+SND_SOC_DAPM_INPUT("IN2LN"),
+SND_SOC_DAPM_INPUT("IN2LP/VXRN"),
+SND_SOC_DAPM_INPUT("IN1RN"),
+SND_SOC_DAPM_INPUT("IN1RP"),
+SND_SOC_DAPM_INPUT("IN2RN"),
+SND_SOC_DAPM_INPUT("IN2RP/VXRP"),
+
+SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8993_BUS_CONTROL_1, 1, 0, clk_sys_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_SUPPLY("TOCLK", WM8993_CLOCKING_1, 14, 0, NULL, 0),
+SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8993_CLOCKING_3, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_MICBIAS("MICBIAS2", WM8993_POWER_MANAGEMENT_1, 5, 0),
+SND_SOC_DAPM_MICBIAS("MICBIAS1", WM8993_POWER_MANAGEMENT_1, 4, 0),
+
+SND_SOC_DAPM_MIXER("IN1L PGA", WM8993_POWER_MANAGEMENT_2, 6, 0,
+ in1l_pga, ARRAY_SIZE(in1l_pga)),
+SND_SOC_DAPM_MIXER("IN1R PGA", WM8993_POWER_MANAGEMENT_2, 4, 0,
+ in1r_pga, ARRAY_SIZE(in1r_pga)),
+
+SND_SOC_DAPM_MIXER("IN2L PGA", WM8993_POWER_MANAGEMENT_2, 7, 0,
+ in2l_pga, ARRAY_SIZE(in2l_pga)),
+SND_SOC_DAPM_MIXER("IN2R PGA", WM8993_POWER_MANAGEMENT_2, 5, 0,
+ in2r_pga, ARRAY_SIZE(in2r_pga)),
+
+/* Dummy widgets to represent differential paths */
+SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_MIXER("MIXINL", WM8993_POWER_MANAGEMENT_2, 9, 0,
+ mixinl, ARRAY_SIZE(mixinl)),
+SND_SOC_DAPM_MIXER("MIXINR", WM8993_POWER_MANAGEMENT_2, 8, 0,
+ mixinr, ARRAY_SIZE(mixinr)),
+
+SND_SOC_DAPM_ADC("ADCL", "Capture", WM8993_POWER_MANAGEMENT_2, 1, 0),
+SND_SOC_DAPM_ADC("ADCR", "Capture", WM8993_POWER_MANAGEMENT_2, 0, 0),
+
+SND_SOC_DAPM_DAC("DACL", "Playback", WM8993_POWER_MANAGEMENT_3, 1, 0),
+SND_SOC_DAPM_DAC("DACR", "Playback", WM8993_POWER_MANAGEMENT_3, 0, 0),
+
+SND_SOC_DAPM_MIXER("Left Output Mixer", WM8993_POWER_MANAGEMENT_3, 5, 0,
+ left_output_mixer, ARRAY_SIZE(left_output_mixer)),
+SND_SOC_DAPM_MIXER("Right Output Mixer", WM8993_POWER_MANAGEMENT_3, 4, 0,
+ right_output_mixer, ARRAY_SIZE(right_output_mixer)),
+
+SND_SOC_DAPM_PGA("Left Output PGA", WM8993_POWER_MANAGEMENT_3, 7, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Right Output PGA", WM8993_POWER_MANAGEMENT_3, 6, 0, NULL, 0),
+
+SND_SOC_DAPM_MIXER("Earpiece Mixer", SND_SOC_NOPM, 0, 0,
+ earpiece_mixer, ARRAY_SIZE(earpiece_mixer)),
+SND_SOC_DAPM_PGA_E("Earpiece Driver", WM8993_POWER_MANAGEMENT_1, 11, 0,
+ NULL, 0, wm8993_earpiece_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+
+SND_SOC_DAPM_MIXER("SPKL", WM8993_POWER_MANAGEMENT_3, 8, 0,
+ left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
+SND_SOC_DAPM_MIXER("SPKR", WM8993_POWER_MANAGEMENT_3, 9, 0,
+ right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
+
+SND_SOC_DAPM_MIXER("SPKL Boost", SND_SOC_NOPM, 0, 0,
+ left_speaker_boost, ARRAY_SIZE(left_speaker_boost)),
+SND_SOC_DAPM_MIXER("SPKR Boost", SND_SOC_NOPM, 0, 0,
+ right_speaker_boost, ARRAY_SIZE(right_speaker_boost)),
+
+SND_SOC_DAPM_PGA("SPKL Driver", WM8993_POWER_MANAGEMENT_1, 12, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("SPKR Driver", WM8993_POWER_MANAGEMENT_1, 13, 0,
+ NULL, 0),
+
+SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
+SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
+SND_SOC_DAPM_PGA_E("Headphone PGA", SND_SOC_NOPM, 0, 0,
+ NULL, 0,
+ hp_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+SND_SOC_DAPM_MIXER("LINEOUT1 Mixer", SND_SOC_NOPM, 0, 0,
+ line1_mix, ARRAY_SIZE(line1_mix)),
+SND_SOC_DAPM_MIXER("LINEOUT2 Mixer", SND_SOC_NOPM, 0, 0,
+ line2_mix, ARRAY_SIZE(line2_mix)),
+
+SND_SOC_DAPM_MIXER("LINEOUT1N Mixer", SND_SOC_NOPM, 0, 0,
+ line1n_mix, ARRAY_SIZE(line1n_mix)),
+SND_SOC_DAPM_MIXER("LINEOUT1P Mixer", SND_SOC_NOPM, 0, 0,
+ line1p_mix, ARRAY_SIZE(line1p_mix)),
+SND_SOC_DAPM_MIXER("LINEOUT2N Mixer", SND_SOC_NOPM, 0, 0,
+ line2n_mix, ARRAY_SIZE(line2n_mix)),
+SND_SOC_DAPM_MIXER("LINEOUT2P Mixer", SND_SOC_NOPM, 0, 0,
+ line2p_mix, ARRAY_SIZE(line2p_mix)),
+
+SND_SOC_DAPM_PGA("LINEOUT1N Driver", WM8993_POWER_MANAGEMENT_3, 13, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("LINEOUT1P Driver", WM8993_POWER_MANAGEMENT_3, 12, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("LINEOUT2N Driver", WM8993_POWER_MANAGEMENT_3, 11, 0,
+ NULL, 0),
+SND_SOC_DAPM_PGA("LINEOUT2P Driver", WM8993_POWER_MANAGEMENT_3, 10, 0,
+ NULL, 0),
+
+SND_SOC_DAPM_OUTPUT("SPKOUTLP"),
+SND_SOC_DAPM_OUTPUT("SPKOUTLN"),
+SND_SOC_DAPM_OUTPUT("SPKOUTRP"),
+SND_SOC_DAPM_OUTPUT("SPKOUTRN"),
+SND_SOC_DAPM_OUTPUT("HPOUT1L"),
+SND_SOC_DAPM_OUTPUT("HPOUT1R"),
+SND_SOC_DAPM_OUTPUT("HPOUT2P"),
+SND_SOC_DAPM_OUTPUT("HPOUT2N"),
+SND_SOC_DAPM_OUTPUT("LINEOUT1P"),
+SND_SOC_DAPM_OUTPUT("LINEOUT1N"),
+SND_SOC_DAPM_OUTPUT("LINEOUT2P"),
+SND_SOC_DAPM_OUTPUT("LINEOUT2N"),
+};
+
+static const struct snd_soc_dapm_route routes[] = {
+ { "IN1L PGA", "IN1LP Switch", "IN1LP" },
+ { "IN1L PGA", "IN1LN Switch", "IN1LN" },
+
+ { "IN1R PGA", "IN1RP Switch", "IN1RP" },
+ { "IN1R PGA", "IN1RN Switch", "IN1RN" },
+
+ { "IN2L PGA", "IN2LP Switch", "IN2LP/VXRN" },
+ { "IN2L PGA", "IN2LN Switch", "IN2LN" },
+
+ { "IN2R PGA", "IN2RP Switch", "IN2RP/VXRP" },
+ { "IN2R PGA", "IN2RN Switch", "IN2RN" },
+
+ { "Direct Voice", NULL, "IN2LP/VXRN" },
+ { "Direct Voice", NULL, "IN2RP/VXRP" },
+
+ { "MIXINL", "IN1L Switch", "IN1L PGA" },
+ { "MIXINL", "IN2L Switch", "IN2L PGA" },
+ { "MIXINL", NULL, "Direct Voice" },
+ { "MIXINL", NULL, "IN1LP" },
+ { "MIXINL", NULL, "Left Output Mixer" },
+
+ { "MIXINR", "IN1R Switch", "IN1R PGA" },
+ { "MIXINR", "IN2R Switch", "IN2R PGA" },
+ { "MIXINR", NULL, "Direct Voice" },
+ { "MIXINR", NULL, "IN1RP" },
+ { "MIXINR", NULL, "Right Output Mixer" },
+
+ { "ADCL", NULL, "MIXINL" },
+ { "ADCL", NULL, "CLK_SYS" },
+ { "ADCL", NULL, "CLK_DSP" },
+ { "ADCR", NULL, "MIXINR" },
+ { "ADCR", NULL, "CLK_SYS" },
+ { "ADCR", NULL, "CLK_DSP" },
+
+ { "DACL", NULL, "CLK_SYS" },
+ { "DACL", NULL, "CLK_DSP" },
+ { "DACR", NULL, "CLK_SYS" },
+ { "DACR", NULL, "CLK_DSP" },
+
+ { "Left Output Mixer", "Left Input Switch", "MIXINL" },
+ { "Left Output Mixer", "Right Input Switch", "MIXINR" },
+ { "Left Output Mixer", "IN2RN Switch", "IN2RN" },
+ { "Left Output Mixer", "IN2LN Switch", "IN2LN" },
+ { "Left Output Mixer", "IN2LP Switch", "IN2LP/VXRN" },
+ { "Left Output Mixer", "IN1L Switch", "IN1L PGA" },
+ { "Left Output Mixer", "IN1R Switch", "IN1R PGA" },
+ { "Left Output Mixer", "DAC Switch", "DACL" },
+
+ { "Right Output Mixer", "Left Input Switch", "MIXINL" },
+ { "Right Output Mixer", "Right Input Switch", "MIXINR" },
+ { "Right Output Mixer", "IN2LN Switch", "IN2LN" },
+ { "Right Output Mixer", "IN2RN Switch", "IN2RN" },
+ { "Right Output Mixer", "IN2RP Switch", "IN2RP/VXRP" },
+ { "Right Output Mixer", "IN1L Switch", "IN1L PGA" },
+ { "Right Output Mixer", "IN1R Switch", "IN1R PGA" },
+ { "Right Output Mixer", "DAC Switch", "DACR" },
+
+ { "Left Output PGA", NULL, "Left Output Mixer" },
+ { "Left Output PGA", NULL, "CLK_SYS" },
+ { "Left Output PGA", NULL, "TOCLK" },
+
+ { "Right Output PGA", NULL, "Right Output Mixer" },
+ { "Right Output PGA", NULL, "CLK_SYS" },
+ { "Right Output PGA", NULL, "TOCLK" },
+
+ { "Earpiece Mixer", "Direct Voice Switch", "Direct Voice" },
+ { "Earpiece Mixer", "Left Output Switch", "Left Output PGA" },
+ { "Earpiece Mixer", "Right Output Switch", "Right Output PGA" },
+
+ { "Earpiece Driver", NULL, "Earpiece Mixer" },
+ { "HPOUT2N", NULL, "Earpiece Driver" },
+ { "HPOUT2P", NULL, "Earpiece Driver" },
+
+ { "SPKL", "Input Switch", "MIXINL" },
+ { "SPKL", "IN1LP Switch", "IN1LP" },
+ { "SPKL", "Output Switch", "Left Output Mixer" },
+ { "SPKL", "DAC Switch", "DACL" },
+ { "SPKL", NULL, "CLK_SYS" },
+ { "SPKL", NULL, "TOCLK" },
+
+ { "SPKR", "Input Switch", "MIXINR" },
+ { "SPKR", "IN1RP Switch", "IN1RP" },
+ { "SPKR", "Output Switch", "Right Output Mixer" },
+ { "SPKR", "DAC Switch", "DACR" },
+ { "SPKR", NULL, "CLK_SYS" },
+ { "SPKR", NULL, "TOCLK" },
+
+ { "SPKL Boost", "Direct Voice Switch", "Direct Voice" },
+ { "SPKL Boost", "SPKL Switch", "SPKL" },
+ { "SPKL Boost", "SPKR Switch", "SPKR" },
+
+ { "SPKR Boost", "Direct Voice Switch", "Direct Voice" },
+ { "SPKR Boost", "SPKR Switch", "SPKR" },
+ { "SPKR Boost", "SPKL Switch", "SPKL" },
+
+ { "SPKL Driver", NULL, "SPKL Boost" },
+ { "SPKL Driver", NULL, "CLK_SYS" },
+
+ { "SPKR Driver", NULL, "SPKR Boost" },
+ { "SPKR Driver", NULL, "CLK_SYS" },
+
+ { "SPKOUTLP", NULL, "SPKL Driver" },
+ { "SPKOUTLN", NULL, "SPKL Driver" },
+ { "SPKOUTRP", NULL, "SPKR Driver" },
+ { "SPKOUTRN", NULL, "SPKR Driver" },
+
+ { "Left Headphone Mux", "DAC", "DACL" },
+ { "Left Headphone Mux", "Mixer", "Left Output Mixer" },
+ { "Right Headphone Mux", "DAC", "DACR" },
+ { "Right Headphone Mux", "Mixer", "Right Output Mixer" },
+
+ { "Headphone PGA", NULL, "Left Headphone Mux" },
+ { "Headphone PGA", NULL, "Right Headphone Mux" },
+ { "Headphone PGA", NULL, "CLK_SYS" },
+ { "Headphone PGA", NULL, "TOCLK" },
+
+ { "HPOUT1L", NULL, "Headphone PGA" },
+ { "HPOUT1R", NULL, "Headphone PGA" },
+
+ { "LINEOUT1N", NULL, "LINEOUT1N Driver" },
+ { "LINEOUT1P", NULL, "LINEOUT1P Driver" },
+ { "LINEOUT2N", NULL, "LINEOUT2N Driver" },
+ { "LINEOUT2P", NULL, "LINEOUT2P Driver" },
+};
+
+static const struct snd_soc_dapm_route lineout1_diff_routes[] = {
+ { "LINEOUT1 Mixer", "IN1L Switch", "IN1L PGA" },
+ { "LINEOUT1 Mixer", "IN1R Switch", "IN1R PGA" },
+ { "LINEOUT1 Mixer", "Output Switch", "Left Output Mixer" },
+
+ { "LINEOUT1N Driver", NULL, "LINEOUT1 Mixer" },
+ { "LINEOUT1P Driver", NULL, "LINEOUT1 Mixer" },
+};
+
+static const struct snd_soc_dapm_route lineout1_se_routes[] = {
+ { "LINEOUT1N Mixer", "Left Output Switch", "Left Output Mixer" },
+ { "LINEOUT1N Mixer", "Right Output Switch", "Left Output Mixer" },
+
+ { "LINEOUT1P Mixer", "Left Output Switch", "Left Output Mixer" },
+
+ { "LINEOUT1N Driver", NULL, "LINEOUT1N Mixer" },
+ { "LINEOUT1P Driver", NULL, "LINEOUT1P Mixer" },
+};
+
+static const struct snd_soc_dapm_route lineout2_diff_routes[] = {
+ { "LINEOUT2 Mixer", "IN2L Switch", "IN2L PGA" },
+ { "LINEOUT2 Mixer", "IN2R Switch", "IN2R PGA" },
+ { "LINEOUT2 Mixer", "Output Switch", "Right Output Mixer" },
+
+ { "LINEOUT2N Driver", NULL, "LINEOUT2 Mixer" },
+ { "LINEOUT2P Driver", NULL, "LINEOUT2 Mixer" },
+};
+
+static const struct snd_soc_dapm_route lineout2_se_routes[] = {
+ { "LINEOUT2N Mixer", "Left Output Switch", "Left Output Mixer" },
+ { "LINEOUT2N Mixer", "Right Output Switch", "Left Output Mixer" },
+
+ { "LINEOUT2P Mixer", "Right Output Switch", "Right Output Mixer" },
+
+ { "LINEOUT2N Driver", NULL, "LINEOUT2N Mixer" },
+ { "LINEOUT2P Driver", NULL, "LINEOUT2P Mixer" },
+};
+
+static int wm8993_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ struct wm8993_priv *wm8993 = codec->private_data;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ /* VMID=2*40k */
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_VMID_SEL_MASK, 0x2);
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
+ WM8993_TSHUT_ENA, WM8993_TSHUT_ENA);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ /* Bring up VMID with fast soft start */
+ snd_soc_update_bits(codec, WM8993_ANTIPOP2,
+ WM8993_STARTUP_BIAS_ENA |
+ WM8993_VMID_BUF_ENA |
+ WM8993_VMID_RAMP_MASK |
+ WM8993_BIAS_SRC,
+ WM8993_STARTUP_BIAS_ENA |
+ WM8993_VMID_BUF_ENA |
+ WM8993_VMID_RAMP_MASK |
+ WM8993_BIAS_SRC);
+
+ /* If either line output is single ended we
+ * need the VMID buffer */
+ if (!wm8993->pdata.lineout1_diff ||
+ !wm8993->pdata.lineout2_diff)
+ snd_soc_update_bits(codec, WM8993_ANTIPOP1,
+ WM8993_LINEOUT_VMID_BUF_ENA,
+ WM8993_LINEOUT_VMID_BUF_ENA);
+
+ /* VMID=2*40k */
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_VMID_SEL_MASK |
+ WM8993_BIAS_ENA,
+ WM8993_BIAS_ENA | 0x2);
+ msleep(32);
+
+ /* Switch to normal bias */
+ snd_soc_update_bits(codec, WM8993_ANTIPOP2,
+ WM8993_BIAS_SRC |
+ WM8993_STARTUP_BIAS_ENA, 0);
+ }
+
+ /* VMID=2*240k */
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_VMID_SEL_MASK, 0x4);
+
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_2,
+ WM8993_TSHUT_ENA, 0);
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ snd_soc_update_bits(codec, WM8993_ANTIPOP1,
+ WM8993_LINEOUT_VMID_BUF_ENA, 0);
+
+ snd_soc_update_bits(codec, WM8993_POWER_MANAGEMENT_1,
+ WM8993_VMID_SEL_MASK | WM8993_BIAS_ENA,
+ 0);
+ break;
+ }
+
+ codec->bias_level = level;
+
+ return 0;
+}
+
+static int wm8993_set_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+
+ switch (clk_id) {
+ case WM8993_SYSCLK_MCLK:
+ wm8993->mclk_rate = freq;
+ case WM8993_SYSCLK_FLL:
+ wm8993->sysclk_source = clk_id;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wm8993_set_dai_fmt(struct snd_soc_dai *dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ unsigned int aif1 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_1);
+ unsigned int aif4 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_4);
+
+ aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV |
+ WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK);
+ aif4 &= ~WM8993_LRCLK_DIR;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ wm8993->master = 0;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFM:
+ aif4 |= WM8993_LRCLK_DIR;
+ wm8993->master = 1;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ aif1 |= WM8993_BCLK_DIR;
+ wm8993->master = 1;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ aif1 |= WM8993_BCLK_DIR;
+ aif4 |= WM8993_LRCLK_DIR;
+ wm8993->master = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_B:
+ aif1 |= WM8993_AIF_LRCLK_INV;
+ case SND_SOC_DAIFMT_DSP_A:
+ aif1 |= 0x18;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ aif1 |= 0x10;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ aif1 |= 0x8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ /* frame inversion not valid for DSP modes */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif1 |= WM8993_AIF_BCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ case SND_SOC_DAIFMT_LEFT_J:
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aif1 |= WM8993_AIF_BCLK_INV | WM8993_AIF_LRCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif1 |= WM8993_AIF_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aif1 |= WM8993_AIF_LRCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ wm8993_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
+ wm8993_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
+
+ return 0;
+}
+
+static int wm8993_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8993_priv *wm8993 = codec->private_data;
+ int ret, i, best, best_val, cur_val;
+ unsigned int clocking1, clocking3, aif1, aif4;
+
+ clocking1 = wm8993_read(codec, WM8993_CLOCKING_1);
+ clocking1 &= ~WM8993_BCLK_DIV_MASK;
+
+ clocking3 = wm8993_read(codec, WM8993_CLOCKING_3);
+ clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK);
+
+ aif1 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_1);
+ aif1 &= ~WM8993_AIF_WL_MASK;
+
+ aif4 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_4);
+ aif4 &= ~WM8993_LRCLK_RATE_MASK;
+
+ /* What BCLK do we need? */
+ wm8993->fs = params_rate(params);
+ wm8993->bclk = 2 * wm8993->fs;
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ wm8993->bclk *= 16;
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ wm8993->bclk *= 20;
+ aif1 |= 0x8;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ wm8993->bclk *= 24;
+ aif1 |= 0x10;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ wm8993->bclk *= 32;
+ aif1 |= 0x18;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm8993->bclk);
+
+ ret = configure_clock(codec);
+ if (ret != 0)
+ return ret;
+
+ /* Select nearest CLK_SYS_RATE */
+ best = 0;
+ best_val = abs((wm8993->sysclk_rate / clk_sys_rates[0].ratio)
+ - wm8993->fs);
+ for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
+ cur_val = abs((wm8993->sysclk_rate /
+ clk_sys_rates[i].ratio) - wm8993->fs);;
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
+ clk_sys_rates[best].ratio);
+ clocking3 |= (clk_sys_rates[best].clk_sys_rate
+ << WM8993_CLK_SYS_RATE_SHIFT);
+
+ /* SAMPLE_RATE */
+ best = 0;
+ best_val = abs(wm8993->fs - sample_rates[0].rate);
+ for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
+ /* Closest match */
+ cur_val = abs(wm8993->fs - sample_rates[i].rate);
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
+ sample_rates[best].rate);
+ clocking3 |= (sample_rates[i].sample_rate << WM8993_SAMPLE_RATE_SHIFT);
+
+ /* BCLK_DIV */
+ best = 0;
+ best_val = INT_MAX;
+ for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
+ cur_val = ((wm8993->sysclk_rate * 10) / bclk_divs[i].div)
+ - wm8993->bclk;
+ if (cur_val < 0) /* Table is sorted */
+ break;
+ if (cur_val < best_val) {
+ best = i;
+ best_val = cur_val;
+ }
+ }
+ wm8993->bclk = (wm8993->sysclk_rate * 10) / bclk_divs[best].div;
+ dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
+ bclk_divs[best].div, wm8993->bclk);
+ clocking1 |= bclk_divs[best].bclk_div << WM8993_BCLK_DIV_SHIFT;
+
+ /* LRCLK is a simple fraction of BCLK */
+ dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs);
+ aif4 |= wm8993->bclk / wm8993->fs;
+
+ wm8993_write(codec, WM8993_CLOCKING_1, clocking1);
+ wm8993_write(codec, WM8993_CLOCKING_3, clocking3);
+ wm8993_write(codec, WM8993_AUDIO_INTERFACE_1, aif1);
+ wm8993_write(codec, WM8993_AUDIO_INTERFACE_4, aif4);
+
+ /* ReTune Mobile? */
+ if (wm8993->pdata.num_retune_configs) {
+ u16 eq1 = wm8993_read(codec, WM8993_EQ1);
+ struct wm8993_retune_mobile_setting *s;
+
+ best = 0;
+ best_val = abs(wm8993->pdata.retune_configs[0].rate
+ - wm8993->fs);
+ for (i = 0; i < wm8993->pdata.num_retune_configs; i++) {
+ cur_val = abs(wm8993->pdata.retune_configs[i].rate
+ - wm8993->fs);
+ if (cur_val < best_val) {
+ best_val = cur_val;
+ best = i;
+ }
+ }
+ s = &wm8993->pdata.retune_configs[best];
+
+ dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",
+ s->name, s->rate);
+
+ /* Disable EQ while we reconfigure */
+ snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, 0);
+
+ for (i = 1; i < ARRAY_SIZE(s->config); i++)
+ wm8993_write(codec, WM8993_EQ1 + i, s->config[i]);
+
+ snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, eq1);
+ }
+
+ return 0;
+}
+
+static int wm8993_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ unsigned int reg;
+
+ reg = wm8993_read(codec, WM8993_DAC_CTRL);
+
+ if (mute)
+ reg |= WM8993_DAC_MUTE;
+ else
+ reg &= ~WM8993_DAC_MUTE;
+
+ wm8993_write(codec, WM8993_DAC_CTRL, reg);
+
+ return 0;
+}
+
+static struct snd_soc_dai_ops wm8993_ops = {
+ .set_sysclk = wm8993_set_sysclk,
+ .set_fmt = wm8993_set_dai_fmt,
+ .hw_params = wm8993_hw_params,
+ .digital_mute = wm8993_digital_mute,
+ .set_pll = wm8993_set_fll,
+};
+
+#define WM8993_RATES SNDRV_PCM_RATE_8000_48000
+
+#define WM8993_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE |\
+ SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai wm8993_dai = {
+ .name = "WM8993",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8993_RATES,
+ .formats = WM8993_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8993_RATES,
+ .formats = WM8993_FORMATS,
+ },
+ .ops = &wm8993_ops,
+ .symmetric_rates = 1,
+};
+EXPORT_SYMBOL_GPL(wm8993_dai);
+
+static struct snd_soc_codec *wm8993_codec;
+
+static int wm8993_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ struct wm8993_priv *wm8993;
+ int ret = 0;
+
+ if (!wm8993_codec) {
+ dev_err(&pdev->dev, "I2C device not yet probed\n");
+ goto err;
+ }
+
+ socdev->card->codec = wm8993_codec;
+ codec = wm8993_codec;
+ wm8993 = codec->private_data;
+
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to create pcms\n");
+ goto err;
+ }
+
+ snd_soc_add_controls(codec, wm8993_snd_controls,
+ ARRAY_SIZE(wm8993_snd_controls));
+ if (wm8993->pdata.num_retune_configs != 0) {
+ dev_dbg(codec->dev, "Using ReTune Mobile\n");
+ } else {
+ dev_dbg(codec->dev, "No ReTune Mobile, using normal EQ\n");
+ snd_soc_add_controls(codec, wm8993_eq_controls,
+ ARRAY_SIZE(wm8993_eq_controls));
+ }
+
+ snd_soc_dapm_new_controls(codec, wm8993_dapm_widgets,
+ ARRAY_SIZE(wm8993_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, routes, ARRAY_SIZE(routes));
+
+ if (wm8993->pdata.lineout1_diff)
+ snd_soc_dapm_add_routes(codec,
+ lineout1_diff_routes,
+ ARRAY_SIZE(lineout1_diff_routes));
+ else
+ snd_soc_dapm_add_routes(codec,
+ lineout1_se_routes,
+ ARRAY_SIZE(lineout1_se_routes));
+
+ if (wm8993->pdata.lineout2_diff)
+ snd_soc_dapm_add_routes(codec,
+ lineout2_diff_routes,
+ ARRAY_SIZE(lineout2_diff_routes));
+ else
+ snd_soc_dapm_add_routes(codec,
+ lineout2_se_routes,
+ ARRAY_SIZE(lineout2_se_routes));
+
+ snd_soc_dapm_new_widgets(codec);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(codec->dev, "failed to register card\n");
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+err:
+ return ret;
+}
+
+static int wm8993_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8993 = {
+ .probe = wm8993_probe,
+ .remove = wm8993_remove,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8993);
+
+static int wm8993_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm8993_priv *wm8993;
+ struct snd_soc_codec *codec;
+ unsigned int val;
+ int ret;
+
+ if (wm8993_codec) {
+ dev_err(&i2c->dev, "A WM8993 is already registered\n");
+ return -EINVAL;
+ }
+
+ wm8993 = kzalloc(sizeof(struct wm8993_priv), GFP_KERNEL);
+ if (wm8993 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8993->codec;
+ if (i2c->dev.platform_data)
+ memcpy(&wm8993->pdata, i2c->dev.platform_data,
+ sizeof(wm8993->pdata));
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->name = "WM8993";
+ codec->read = wm8993_read;
+ codec->write = wm8993_write;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+ codec->reg_cache = wm8993->reg_cache;
+ codec->reg_cache_size = ARRAY_SIZE(wm8993->reg_cache);
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8993_set_bias_level;
+ codec->dai = &wm8993_dai;
+ codec->num_dai = 1;
+ codec->private_data = wm8993;
+
+ memcpy(wm8993->reg_cache, wm8993_reg_defaults,
+ sizeof(wm8993->reg_cache));
+
+ i2c_set_clientdata(i2c, wm8993);
+ codec->control_data = i2c;
+ wm8993_codec = codec;
+
+ codec->dev = &i2c->dev;
+
+ val = wm8993_read_hw(codec, WM8993_SOFTWARE_RESET);
+ if (val != wm8993_reg_defaults[WM8993_SOFTWARE_RESET]) {
+ dev_err(codec->dev, "Invalid ID register value %x\n", val);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = wm8993_write(codec, WM8993_SOFTWARE_RESET, 0xffff);
+ if (ret != 0)
+ goto err;
+
+ /* By default we're using the output mixers */
+ wm8993->class_w_users = 2;
+
+ /* Latch volume update bits and default ZC on */
+ snd_soc_update_bits(codec, WM8993_LEFT_LINE_INPUT_1_2_VOLUME,
+ WM8993_IN1_VU, WM8993_IN1_VU);
+ snd_soc_update_bits(codec, WM8993_RIGHT_LINE_INPUT_1_2_VOLUME,
+ WM8993_IN1_VU, WM8993_IN1_VU);
+ snd_soc_update_bits(codec, WM8993_LEFT_LINE_INPUT_3_4_VOLUME,
+ WM8993_IN2_VU, WM8993_IN2_VU);
+ snd_soc_update_bits(codec, WM8993_RIGHT_LINE_INPUT_3_4_VOLUME,
+ WM8993_IN2_VU, WM8993_IN2_VU);
+
+ snd_soc_update_bits(codec, WM8993_SPEAKER_VOLUME_RIGHT,
+ WM8993_SPKOUT_VU, WM8993_SPKOUT_VU);
+
+ snd_soc_update_bits(codec, WM8993_LEFT_OUTPUT_VOLUME,
+ WM8993_HPOUT1L_ZC, WM8993_HPOUT1L_ZC);
+ snd_soc_update_bits(codec, WM8993_RIGHT_OUTPUT_VOLUME,
+ WM8993_HPOUT1_VU | WM8993_HPOUT1R_ZC,
+ WM8993_HPOUT1_VU | WM8993_HPOUT1R_ZC);
+
+ snd_soc_update_bits(codec, WM8993_LEFT_OPGA_VOLUME,
+ WM8993_MIXOUTL_ZC, WM8993_MIXOUTL_ZC);
+ snd_soc_update_bits(codec, WM8993_RIGHT_OPGA_VOLUME,
+ WM8993_MIXOUTR_ZC | WM8993_MIXOUT_VU,
+ WM8993_MIXOUTR_ZC | WM8993_MIXOUT_VU);
+
+ snd_soc_update_bits(codec, WM8993_RIGHT_DAC_DIGITAL_VOLUME,
+ WM8993_DAC_VU, WM8993_DAC_VU);
+ snd_soc_update_bits(codec, WM8993_RIGHT_ADC_DIGITAL_VOLUME,
+ WM8993_ADC_VU, WM8993_ADC_VU);
+
+ /* Manualy manage the HPOUT sequencing for independent stereo
+ * control. */
+ snd_soc_update_bits(codec, WM8993_ANALOGUE_HP_0,
+ WM8993_HPOUT1_AUTO_PU, 0);
+
+ /* Use automatic clock configuration */
+ snd_soc_update_bits(codec, WM8993_CLOCKING_4, WM8993_SR_MODE, 0);
+
+ if (!wm8993->pdata.lineout1_diff)
+ snd_soc_update_bits(codec, WM8993_LINE_MIXER1,
+ WM8993_LINEOUT1_MODE,
+ WM8993_LINEOUT1_MODE);
+ if (!wm8993->pdata.lineout2_diff)
+ snd_soc_update_bits(codec, WM8993_LINE_MIXER2,
+ WM8993_LINEOUT2_MODE,
+ WM8993_LINEOUT2_MODE);
+
+ if (wm8993->pdata.lineout1fb)
+ snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
+ WM8993_LINEOUT1_FB, WM8993_LINEOUT1_FB);
+
+ if (wm8993->pdata.lineout2fb)
+ snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
+ WM8993_LINEOUT2_FB, WM8993_LINEOUT2_FB);
+
+ /* Apply the microphone bias/detection configuration - the
+ * platform data is directly applicable to the register. */
+ snd_soc_update_bits(codec, WM8993_MICBIAS,
+ WM8993_JD_SCTHR_MASK | WM8993_JD_THR_MASK |
+ WM8993_MICB1_LVL | WM8993_MICB2_LVL,
+ wm8993->pdata.jd_scthr << WM8993_JD_SCTHR_SHIFT |
+ wm8993->pdata.jd_thr << WM8993_JD_THR_SHIFT |
+ wm8993->pdata.micbias1_lvl |
+ wm8993->pdata.micbias1_lvl << 1);
+
+ ret = wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ if (ret != 0)
+ goto err;
+
+ wm8993_dai.dev = codec->dev;
+
+ ret = snd_soc_register_dai(&wm8993_dai);
+ if (ret != 0)
+ goto err_bias;
+
+ ret = snd_soc_register_codec(codec);
+
+ return 0;
+
+err_bias:
+ wm8993_set_bias_level(codec, SND_SOC_BIAS_OFF);
+err:
+ wm8993_codec = NULL;
+ kfree(wm8993);
+ return ret;
+}
+
+static int wm8993_i2c_remove(struct i2c_client *client)
+{
+ struct wm8993_priv *wm8993 = i2c_get_clientdata(client);
+
+ snd_soc_unregister_codec(&wm8993->codec);
+ snd_soc_unregister_dai(&wm8993_dai);
+
+ wm8993_set_bias_level(&wm8993->codec, SND_SOC_BIAS_OFF);
+ kfree(wm8993);
+
+ return 0;
+}
+
+static const struct i2c_device_id wm8993_i2c_id[] = {
+ { "wm8993", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8993_i2c_id);
+
+static struct i2c_driver wm8993_i2c_driver = {
+ .driver = {
+ .name = "WM8993",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8993_i2c_probe,
+ .remove = wm8993_i2c_remove,
+ .id_table = wm8993_i2c_id,
+};
+
+
+static int __init wm8993_modinit(void)
+{
+ int ret;
+
+ ret = i2c_add_driver(&wm8993_i2c_driver);
+ if (ret != 0)
+ pr_err("WM8993: Unable to register I2C driver: %d\n", ret);
+
+ return ret;
+}
+module_init(wm8993_modinit);
+
+static void __exit wm8993_exit(void)
+{
+ i2c_del_driver(&wm8993_i2c_driver);
+}
+module_exit(wm8993_exit);
+
+
+MODULE_DESCRIPTION("ASoC WM8993 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");