hpsa: call pci_release_regions after pci_disable_device
Despite the fact that PCI devices are enabled in this order:
1. pci_enable_device
2. pci_request_regions
Documentation/PCI/pci.txt specifies that they be undone
in this order
1. pci_disable_device
2. pci_release_regions
Tested by injecting error in the call to pci_enable_device
in hpsa_init_one -> hpsa_pci_init:
[ 9.095001] hpsa 0000:04:00.0: failed to enable PCI device
[ 9.095005] hpsa: probe of 0000:04:00.0 failed with error -22
(-22 is -EINVAL)
and then in the call pci_request_regions:
[ 9.178623] hpsa 0000:04:00.0: failed to obtain PCI resources
[ 9.178671] hpsa: probe of 0000:04:00.0 failed with error -16
(-16 is -EBUSY)
and then by adding
reset_devices
to the kernel command line and inject errors into the two
calls to pci_enable_device and the call to pci_request_regions
in hpsa_init_one -> hpsa_init_reset_devices.
(inject on 6th call, 1st to hpsa2)
[ 62.413750] hpsa 0000:04:00.0: Failed to enable PCI device
(inject on 7th call, 2nd to hpsa2)
[ 62.807571] hpsa 0000:04:00.0: failed to enable device.
(inject on 8th call, 3rd to hpsa2)
[ 62.697198] hpsa 0000:04:00.0: failed to obtain PCI resources
[ 62.697234] hpsa: probe of 0000:04:00.0 failed with error -16
The reset_devices path calls return -ENODEV on failure
rather than passing the result, which apparently doesn't
cause the pci driver to print anything.
Reviewed-by: Scott Teel <scott.teel@pmcs.com>
Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Hannes Reinecke <hare@Suse.de>
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Don Brace <don.brace@pmcs.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index f1ef63b..5007490 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -7029,8 +7029,12 @@
iounmap(h->vaddr); /* pci_init 3 */
h->vaddr = NULL;
hpsa_disable_interrupt_mode(h); /* pci_init 2 */
- pci_release_regions(h->pdev); /* pci_init 2 */
+ /*
+ * call pci_disable_device before pci_release_regions per
+ * Documentation/PCI/pci.txt
+ */
pci_disable_device(h->pdev); /* pci_init 1 */
+ pci_release_regions(h->pdev); /* pci_init 2 */
}
/* several items must be freed later */
@@ -7053,6 +7057,7 @@
err = pci_enable_device(h->pdev);
if (err) {
dev_err(&h->pdev->dev, "failed to enable PCI device\n");
+ pci_disable_device(h->pdev);
return err;
}
@@ -7060,7 +7065,8 @@
if (err) {
dev_err(&h->pdev->dev,
"failed to obtain PCI resources\n");
- goto clean1; /* pci */
+ pci_disable_device(h->pdev);
+ return err;
}
pci_set_master(h->pdev);
@@ -7101,9 +7107,12 @@
h->vaddr = NULL;
clean2: /* intmode+region, pci */
hpsa_disable_interrupt_mode(h);
- pci_release_regions(h->pdev);
-clean1: /* pci */
+ /*
+ * call pci_disable_device before pci_release_regions per
+ * Documentation/PCI/pci.txt
+ */
pci_disable_device(h->pdev);
+ pci_release_regions(h->pdev);
return err;
}