Merge tag 'ux500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt
From Linus Walleij:
Device tree patches for ux500, basically trees and auxdata:
- Fix for the thermal node to be contained in the PRCMU node
- Add the DTS and auxdata needed to boot the U8540 platform
- Various regulators added and renamed
- Rename base SoC node
- A bunch of DMA patches adding channels for DT boots
- A bunch of crypto+hash patches adding config for DT boots
- A bunch of patches fixing the ALSA SoC support to work
- Register the LP5521 LEDs
- Fix a number of typos and naming errors
* tag 'ux500-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (39 commits)
ARM: ux500: drop any 0x prefix from I2C DT devices
ARM: ux500: Allocate correct amount of memory for the u8540 in DT
ARM: ux500: Provide auxdata to ux500 ASoC driver
ARM: ux500: Add DT regulators for ab8500-codec
ARM: ux500: Correct anamic2 typo in DT files
ARM: ux500: Fix trivial typo in v-anamic1 comment
ARM: ux500: Reduce PRCMU reg-names to shorter form for u8540 DT
ARM: ux500: Add an auxdata entry for MUSB for clock-name look-up
ARM: ux500: cut chip-select GPIOs from SSP device
ARM: ux500: use symbolic names for interrupt flags
ARM: ux500: use #include syntax to include *.dtsi.
ARM: ux500: bump MMC/SD max frequency for DT boots
ARM: ux500: Apply other compatible name to the u8540 DTS file
pinctrl/nomadik: Standardise Pinctrl compat string for DBx5x based platforms
ARM: ux500: Standardise Pinctrl compatible string for DBx5x based platforms
ARM: ux500: Standardise DBx5x0 based Pinctrl compat string in the DTS
crypto: ux500/hash - Enable DT probing of the driver
crypto: ux500/cryp - Enable DT probing of the driver
ARM: ux500: enable the crypto and hash on all dbx500
ARM: ux500: Provide an AUXDATA entry for ux500-hash
...
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
index c3a14e0..cd9e90c 100644
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -120,7 +120,7 @@
"USB_LINK_STATUS",
"USB_ADP_PROBE_PLUG",
"USB_ADP_PROBE_UNPLUG";
- vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
+ vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
v-ape-supply = <&db8500_vape_reg>;
musb_1v8-supply = <&db8500_vsmps2_reg>;
};
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a1c7bb1..4823c31 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -162,6 +162,7 @@
dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
hrefprev60.dtb \
hrefv60plus.dtb \
+ ccu8540.dtb \
ccu9540.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
diff --git a/arch/arm/boot/dts/ccu8540.dts b/arch/arm/boot/dts/ccu8540.dts
new file mode 100644
index 0000000..48ff034
--- /dev/null
+++ b/arch/arm/boot/dts/ccu8540.dts
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2013 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "dbx5x0.dtsi"
+
+/ {
+ model = "ST-Ericsson U8540 platform with Device Tree";
+ compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
+
+ memory@0 {
+ reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
+ };
+
+ soc {
+ prcmu@80157000 {
+ reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
+ reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
+ };
+
+ uart@80120000 {
+ status = "okay";
+ };
+
+ uart@80121000 {
+ status = "okay";
+ };
+
+ uart@80007000 {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ccu9540.dts
index 0430546..ed29ec7 100644
--- a/arch/arm/boot/dts/ccu9540.dts
+++ b/arch/arm/boot/dts/ccu9540.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-/include/ "dbx5x0.dtsi"
+#include "dbx5x0.dtsi"
/ {
model = "ST-Ericsson CCU9540 platform with Device Tree";
@@ -20,7 +20,7 @@
reg = <0x00000000 0x20000000>;
};
- soc-u9500 {
+ soc {
uart@80120000 {
status = "okay";
};
@@ -52,7 +52,7 @@
// WLAN SDIO channel
sdi1_per2@80118000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <4>;
status = "okay";
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index b6bc4ff..a082f0b 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -9,10 +9,11 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "skeleton.dtsi"
/ {
- soc-u9500 {
+ soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "stericsson,db8500";
@@ -31,33 +32,33 @@
L2: l2-cache {
compatible = "arm,pl310-cache";
reg = <0xa0412000 0x1000>;
- interrupts = <0 13 4>;
+ interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
cache-unified;
cache-level = <2>;
};
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 7 0x4>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
timer@a0410600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xa0410600 0x20>;
- interrupts = <1 13 0x304>;
+ interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
};
rtc@80154000 {
compatible = "arm,rtc-pl031", "arm,primecell";
reg = <0x80154000 0x1000>;
- interrupts = <0 18 0x4>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
};
gpio0: gpio@8012e000 {
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8012e000 0x80>;
- interrupts = <0 119 0x4>;
+ interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -70,7 +71,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8012e080 0x80>;
- interrupts = <0 120 0x4>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -83,7 +84,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e000 0x80>;
- interrupts = <0 121 0x4>;
+ interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -96,7 +97,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e080 0x80>;
- interrupts = <0 122 0x4>;
+ interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -109,7 +110,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e100 0x80>;
- interrupts = <0 123 0x4>;
+ interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -122,7 +123,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8000e180 0x80>;
- interrupts = <0 124 0x4>;
+ interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -135,7 +136,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8011e000 0x80>;
- interrupts = <0 125 0x4>;
+ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -148,7 +149,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0x8011e080 0x80>;
- interrupts = <0 126 0x4>;
+ interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -161,7 +162,7 @@
compatible = "stericsson,db8500-gpio",
"st,nomadik-gpio";
reg = <0xa03fe000 0x80>;
- interrupts = <0 127 0x4>;
+ interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
st,supports-sleepmode;
@@ -171,29 +172,61 @@
};
pinctrl {
- compatible = "stericsson,nmk-pinctrl";
+ compatible = "stericsson,db8500-pinctrl";
prcm = <&prcmu>;
};
- usb@a03e0000 {
+ usb_per5@a03e0000 {
compatible = "stericsson,db8500-musb",
"mentor,musb";
reg = <0xa03e0000 0x10000>;
- interrupts = <0 23 0x4>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+
+ dr_mode = "otg";
+
+ dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
+ <&dma 38 0 0x0>, /* Logical - MemToDev */
+ <&dma 37 0 0x2>, /* Logical - DevToMem */
+ <&dma 37 0 0x0>, /* Logical - MemToDev */
+ <&dma 36 0 0x2>, /* Logical - DevToMem */
+ <&dma 36 0 0x0>, /* Logical - MemToDev */
+ <&dma 19 0 0x2>, /* Logical - DevToMem */
+ <&dma 19 0 0x0>, /* Logical - MemToDev */
+ <&dma 18 0 0x2>, /* Logical - DevToMem */
+ <&dma 18 0 0x0>, /* Logical - MemToDev */
+ <&dma 17 0 0x2>, /* Logical - DevToMem */
+ <&dma 17 0 0x0>, /* Logical - MemToDev */
+ <&dma 16 0 0x2>, /* Logical - DevToMem */
+ <&dma 16 0 0x0>, /* Logical - MemToDev */
+ <&dma 39 0 0x2>, /* Logical - DevToMem */
+ <&dma 39 0 0x0>; /* Logical - MemToDev */
+
+ dma-names = "iep_1_9", "oep_1_9",
+ "iep_2_10", "oep_2_10",
+ "iep_3_11", "oep_3_11",
+ "iep_4_12", "oep_4_12",
+ "iep_5_13", "oep_5_13",
+ "iep_6_14", "oep_6_14",
+ "iep_7_15", "oep_7_15",
+ "iep_8", "oep_8";
};
- dma-controller@801C0000 {
- compatible = "stericsson,db8500-dma40",
- "stericsson,dma40";
+ dma: dma-controller@801C0000 {
+ compatible = "stericsson,db8500-dma40", "stericsson,dma40";
reg = <0x801C0000 0x1000 0x40010000 0x800>;
- interrupts = <0 25 0x4>;
+ reg-names = "base", "lcpa";
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+
+ #dma-cells = <3>;
+ memcpy-channels = <56 57 58 59 60>;
};
prcmu: prcmu@80157000 {
compatible = "stericsson,db8500-prcmu";
reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
- interrupts = <0 47 0x4>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
@@ -208,7 +241,8 @@
thermal@801573c0 {
compatible = "stericsson,db8500-thermal";
reg = <0x801573c0 0x40>;
- interrupts = <21 0x4>, <22 0x4>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
+ <22 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
status = "disabled";
};
@@ -322,21 +356,21 @@
ab8500 {
compatible = "stericsson,ab8500";
interrupt-parent = <&intc>;
- interrupts = <0 40 0x4>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
ab8500-rtc {
compatible = "stericsson,ab8500-rtc";
- interrupts = <17 0x4
- 18 0x4>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH
+ 18 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "60S", "ALARM";
};
ab8500-gpadc {
compatible = "stericsson,ab8500-gpadc";
- interrupts = <32 0x4
- 39 0x4>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH
+ 39 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "HW_CONV_END", "SW_CONV_END";
vddadc-supply = <&ab8500_ldo_tvout_reg>;
};
@@ -369,13 +403,13 @@
ab8500_usb {
compatible = "stericsson,ab8500-usb";
- interrupts = < 90 0x4
- 96 0x4
- 14 0x4
- 15 0x4
- 79 0x4
- 74 0x4
- 75 0x4>;
+ interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
+ 96 IRQ_TYPE_LEVEL_HIGH
+ 14 IRQ_TYPE_LEVEL_HIGH
+ 15 IRQ_TYPE_LEVEL_HIGH
+ 79 IRQ_TYPE_LEVEL_HIGH
+ 74 IRQ_TYPE_LEVEL_HIGH
+ 75 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ID_WAKEUP_R",
"ID_WAKEUP_F",
"VBUS_DET_F",
@@ -383,15 +417,15 @@
"USB_LINK_STATUS",
"USB_ADP_PROBE_PLUG",
"USB_ADP_PROBE_UNPLUG";
- vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
+ vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
v-ape-supply = <&db8500_vape_reg>;
musb_1v8-supply = <&db8500_vsmps2_reg>;
};
ab8500-ponkey {
compatible = "stericsson,ab8500-poweron-key";
- interrupts = <6 0x4
- 7 0x4>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH
+ 7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
};
@@ -410,6 +444,11 @@
codec: ab8500-codec {
compatible = "stericsson,ab8500-codec";
+ V-AUD-supply = <&ab8500_ldo_audio_reg>;
+ V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+ V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+ V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
+
stericsson,earpeice-cmv = <950>; /* Units in mV. */
};
@@ -441,8 +480,8 @@
};
// supply for v-intcore12; VINTCORE12 LDO
- ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
- regulator-compatible = "ab8500_ldo_initcore";
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+ regulator-compatible = "ab8500_ldo_intcore";
};
// supply for tvout; gpadc; TVOUT LDO
@@ -460,14 +499,14 @@
regulator-compatible = "ab8500_ldo_audio";
};
- // supply for v-anamic1 VAMic1-LDO
+ // supply for v-anamic1 VAMIC1 LDO
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
regulator-compatible = "ab8500_ldo_anamic1";
};
// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
- ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
- regulator-compatible = "ab8500_ldo_amamic2";
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+ regulator-compatible = "ab8500_ldo_anamic2";
};
// supply for v-dmic; VDMIC LDO
@@ -486,7 +525,7 @@
i2c@80004000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80004000 0x1000>;
- interrupts = <0 21 0x4>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
arm,primecell-periphid = <0x180024>;
#address-cells = <1>;
@@ -499,7 +538,7 @@
i2c@80122000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80122000 0x1000>;
- interrupts = <0 22 0x4>;
+ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
arm,primecell-periphid = <0x180024>;
#address-cells = <1>;
@@ -512,7 +551,7 @@
i2c@80128000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80128000 0x1000>;
- interrupts = <0 55 0x4>;
+ interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
arm,primecell-periphid = <0x180024>;
#address-cells = <1>;
@@ -525,7 +564,7 @@
i2c@80110000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80110000 0x1000>;
- interrupts = <0 12 0x4>;
+ interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
arm,primecell-periphid = <0x180024>;
#address-cells = <1>;
@@ -538,7 +577,7 @@
i2c@8012a000 {
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x8012a000 0x1000>;
- interrupts = <0 51 0x4>;
+ interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
arm,primecell-periphid = <0x180024>;
#address-cells = <1>;
@@ -551,82 +590,114 @@
ssp@80002000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80002000 0x1000>;
- interrupts = <0 14 0x4>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
-
- // Add one of these for each child device
- cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
- &gpio6 22 0x4 &gpio7 0 0x4>;
-
};
uart@80120000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80120000 0x1000>;
- interrupts = <0 11 0x4>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
+ <&dma 13 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
status = "disabled";
};
+
uart@80121000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80121000 0x1000>;
- interrupts = <0 19 0x4>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
+ <&dma 12 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
status = "disabled";
};
+
uart@80007000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x80007000 0x1000>;
- interrupts = <0 26 0x4>;
+ interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
+ <&dma 11 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
status = "disabled";
};
sdi0_per1@80126000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80126000 0x1000>;
- interrupts = <0 60 0x4>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
+ <&dma 29 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
status = "disabled";
};
sdi1_per2@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
- interrupts = <0 50 0x4>;
+ interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
+ <&dma 32 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
status = "disabled";
};
sdi2_per3@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
- interrupts = <0 41 0x4>;
+ interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
+ <&dma 28 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
status = "disabled";
};
sdi3_per2@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
- interrupts = <0 59 0x4>;
+ interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
sdi4_per2@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
- interrupts = <0 99 0x4>;
+ interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+
+ dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
+ <&dma 42 0 0x0>; /* Logical - MemToDev */
+ dma-names = "rx", "tx";
+
status = "disabled";
};
sdi5_per3@80008000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80008000 0x1000>;
- interrupts = <0 100 0x4>;
+ interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
msp0: msp@80123000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80123000 0x1000>;
- interrupts = <0 31 0x4>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
status = "disabled";
};
@@ -634,7 +705,7 @@
msp1: msp@80124000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80124000 0x1000>;
- interrupts = <0 62 0x4>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
status = "disabled";
};
@@ -643,7 +714,7 @@
msp2: msp@80117000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80117000 0x1000>;
- interrupts = <0 98 0x4>;
+ interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
status = "disabled";
};
@@ -651,7 +722,7 @@
msp3: msp@80125000 {
compatible = "stericsson,ux500-msp-i2s";
reg = <0x80125000 0x1000>;
- interrupts = <0 62 0x4>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
v-ape-supply = <&db8500_vape_reg>;
status = "disabled";
};
@@ -686,5 +757,20 @@
status = "disabled";
};
+
+ cryp@a03cb000 {
+ compatible = "stericsson,ux500-cryp";
+ reg = <0xa03cb000 0x1000>;
+ interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+
+ v-ape-supply = <&db8500_vape_reg>;
+ };
+
+ hash@a03c2000 {
+ compatible = "stericsson,ux500-hash";
+ reg = <0xa03c2000 0x1000>;
+
+ v-ape-supply = <&db8500_vape_reg>;
+ };
};
};
diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
index c0bc426..9db41b9 100644
--- a/arch/arm/boot/dts/href.dtsi
+++ b/arch/arm/boot/dts/href.dtsi
@@ -9,7 +9,8 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "dbx5x0.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dbx5x0.dtsi"
/ {
memory {
@@ -27,7 +28,7 @@
};
};
- soc-u9500 {
+ soc {
uart@80120000 {
status = "okay";
};
@@ -45,14 +46,14 @@
compatible = "tc3589x";
reg = <0x42>;
interrupt-parent = <&gpio6>;
- interrupts = <25 0x1>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
tc3589x_gpio: tc3589x_gpio {
compatible = "tc3589x-gpio";
- interrupts = <0 0x1>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -63,17 +64,43 @@
};
i2c@80128000 {
- lp5521@0x33 {
- compatible = "lp5521";
+ lp5521@33 {
+ compatible = "national,lp5521";
reg = <0x33>;
+ label = "lp5521_pri";
+ clock-mode = /bits/ 8 <2>;
+ chan0 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
+ chan1 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
+ chan2 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
};
-
- lp5521@0x34 {
- compatible = "lp5521";
+ lp5521@34 {
+ compatible = "national,lp5521";
reg = <0x34>;
+ label = "lp5521_sec";
+ clock-mode = /bits/ 8 <2>;
+ chan0 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
+ chan1 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
+ chan2 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
};
-
- bh1780@0x29 {
+ bh1780@29 {
compatible = "rohm,bh1780gli";
reg = <0x33>;
};
@@ -82,7 +109,7 @@
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <4>;
mmc-cap-sd-highspeed;
mmc-cap-mmc-highspeed;
@@ -97,7 +124,7 @@
// WLAN SDIO channel
sdi1_per2@80118000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <4>;
status = "okay";
@@ -106,7 +133,7 @@
// PoP:ed eMMC
sdi2_per3@80005000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
@@ -116,7 +143,7 @@
// On-board eMMC
sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
@@ -236,7 +263,7 @@
regulator-name = "V-MMC-SD";
};
- ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
regulator-name = "V-INTCORE";
};
@@ -256,7 +283,7 @@
regulator-name = "V-AMIC1";
};
- ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
regulator-name = "V-AMIC2";
};
diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts
index c2d2748..c6bb07d 100644
--- a/arch/arm/boot/dts/hrefprev60.dts
+++ b/arch/arm/boot/dts/hrefprev60.dts
@@ -10,9 +10,9 @@
*/
/dts-v1/;
-/include/ "dbx5x0.dtsi"
-/include/ "href.dtsi"
-/include/ "stuib.dtsi"
+#include "dbx5x0.dtsi"
+#include "href.dtsi"
+#include "stuib.dtsi"
/ {
model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
@@ -24,7 +24,7 @@
};
};
- soc-u9500 {
+ soc {
prcmu@80157000 {
ab8500@5 {
ab8500-gpio {
@@ -41,7 +41,7 @@
};
i2c@80110000 {
- bu21013_tp@0x5c {
+ bu21013_tp@5c {
reset-gpio = <&tc3589x_gpio 13 0x4>;
};
};
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index 2b587a7..3d580d6 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -10,9 +10,9 @@
*/
/dts-v1/;
-/include/ "dbx5x0.dtsi"
-/include/ "href.dtsi"
-/include/ "stuib.dtsi"
+#include "dbx5x0.dtsi"
+#include "href.dtsi"
+#include "stuib.dtsi"
/ {
model = "ST-Ericsson HREF (v60+) platform with Device Tree";
@@ -24,7 +24,7 @@
};
};
- soc-u9500 {
+ soc {
i2c@80110000 {
bu21013_tp@0x5c {
reset-gpio = <&gpio4 15 0x4>;
@@ -34,7 +34,7 @@
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <4>;
mmc-cap-sd-highspeed;
mmc-cap-mmc-highspeed;
@@ -48,7 +48,7 @@
// WLAN SDIO channel
sdi1_per2@80118000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <4>;
status = "okay";
@@ -57,7 +57,7 @@
// PoP:ed eMMC
sdi2_per3@80005000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
@@ -67,7 +67,7 @@
// On-board eMMC
sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
@@ -172,7 +172,7 @@
regulator-name = "V-MMC-SD";
};
- ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
regulator-name = "V-INTCORE";
};
@@ -192,7 +192,7 @@
regulator-name = "V-AMIC1";
};
- ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
regulator-name = "V-AMIC2";
};
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index db5db24..fb9dce5 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-/include/ "dbx5x0.dtsi"
+#include "dbx5x0.dtsi"
/ {
model = "Calao Systems Snowball platform with device tree";
@@ -82,7 +82,7 @@
};
};
- soc-u9500 {
+ soc {
sound {
compatible = "stericsson,snd-soc-mop500";
@@ -99,40 +99,13 @@
status = "okay";
};
- prcmu@80157000 {
- thermal@801573c0 {
- num-trips = <4>;
-
- trip0-temp = <70000>;
- trip0-type = "active";
- trip0-cdev-num = <1>;
- trip0-cdev-name0 = "thermal-cpufreq-0";
-
- trip1-temp = <75000>;
- trip1-type = "active";
- trip1-cdev-num = <1>;
- trip1-cdev-name0 = "thermal-cpufreq-0";
-
- trip2-temp = <80000>;
- trip2-type = "active";
- trip2-cdev-num = <1>;
- trip2-cdev-name0 = "thermal-cpufreq-0";
-
- trip3-temp = <85000>;
- trip3-type = "critical";
- trip3-cdev-num = <0>;
-
- status = "okay";
- };
- };
-
external-bus@50000000 {
status = "okay";
ethernet@0 {
compatible = "smsc,lan9115";
reg = <0 0x10000>;
- interrupts = <12 0x1>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gpio4>;
vdd33a-supply = <&en_3v3_reg>;
vddvario-supply = <&db8500_vape_reg>;
@@ -146,13 +119,21 @@
};
};
+ vmmci: regulator-gpio {
+ gpios = <&gpio6 25 0x4>;
+ enable-gpio = <&gpio7 4 0x4>;
+
+ status = "okay";
+ };
+
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <4>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
+ vqmmc-supply = <&vmmci>;
cd-gpios = <&gpio6 26 0x4>; // 218
cd-inverted;
@@ -163,7 +144,7 @@
// On-board eMMC
sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
+ max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
@@ -197,15 +178,15 @@
};
i2c@80128000 {
- lp5521@0x33 {
+ lp5521@33 {
// compatible = "lp5521";
reg = <0x33>;
};
- lp5521@0x34 {
+ lp5521@34 {
// compatible = "lp5521";
reg = <0x34>;
};
- bh1780@0x29 {
+ bh1780@29 {
// compatible = "rohm,bh1780gli";
reg = <0x33>;
};
@@ -298,6 +279,31 @@
};
};
+ thermal@801573c0 {
+ num-trips = <4>;
+
+ trip0-temp = <70000>;
+ trip0-type = "active";
+ trip0-cdev-num = <1>;
+ trip0-cdev-name0 = "thermal-cpufreq-0";
+
+ trip1-temp = <75000>;
+ trip1-type = "active";
+ trip1-cdev-num = <1>;
+ trip1-cdev-name0 = "thermal-cpufreq-0";
+
+ trip2-temp = <80000>;
+ trip2-type = "active";
+ trip2-cdev-num = <1>;
+ trip2-cdev-name0 = "thermal-cpufreq-0";
+
+ trip3-temp = <85000>;
+ trip3-type = "critical";
+ trip3-cdev-num = <0>;
+
+ status = "okay";
+ };
+
ab8500 {
ab8500-gpio {
compatible = "stericsson,ab8500-gpio";
@@ -316,7 +322,7 @@
regulator-name = "V-MMC-SD";
};
- ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
regulator-name = "V-INTCORE";
};
@@ -336,7 +342,7 @@
regulator-name = "V-AMIC1";
};
- ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
regulator-name = "V-AMIC2";
};
diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi
index 615392a..524e332 100644
--- a/arch/arm/boot/dts/stuib.dtsi
+++ b/arch/arm/boot/dts/stuib.dtsi
@@ -9,13 +9,15 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <dt-bindings/interrupt-controller/irq.h>
+
/ {
- soc-u9500 {
+ soc {
i2c@80004000 {
stmpe1601: stmpe1601@40 {
compatible = "st,stmpe1601";
reg = <0x40>;
- interrupts = <26 0x2>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
interrupt-parent = <&gpio6>;
interrupt-controller;
@@ -52,26 +54,26 @@
};
i2c@80110000 {
- bu21013_tp@0x5c {
- compatible = "rhom,bu21013_tp";
+ bu21013_tp@5c {
+ compatible = "rohm,bu21013_tp";
reg = <0x5c>;
touch-gpio = <&gpio2 20 0x4>;
avdd-supply = <&ab8500_ldo_aux1_reg>;
- rhom,touch-max-x = <384>;
- rhom,touch-max-y = <704>;
- rhom,flip-y;
+ rohm,touch-max-x = <384>;
+ rohm,touch-max-y = <704>;
+ rohm,flip-y;
};
- bu21013_tp@0x5d {
- compatible = "rhom,bu21013_tp";
+ bu21013_tp@5d {
+ compatible = "rohm,bu21013_tp";
reg = <0x5d>;
touch-gpio = <&gpio2 20 0x4>;
avdd-supply = <&ab8500_ldo_aux1_reg>;
- rhom,touch-max-x = <384>;
- rhom,touch-max-y = <704>;
- rhom,flip-y;
+ rohm,touch-max-x = <384>;
+ rohm,touch-max-y = <704>;
+ rohm,flip-y;
};
};
};
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 46cca52..7669a49 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -274,11 +274,16 @@
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
+ OF_DEV_AUXDATA("stericsson,db8500-musb", 0xa03e0000, "musb-ux500.0", NULL),
OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
&db8500_prcmu_pdata),
OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL),
+ OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
+ OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
+ OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
+ NULL),
/* Requires device name bindings. */
- OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
+ OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE,
"pinctrl-db8500", NULL),
/* Requires clock name and DMA bindings. */
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
@@ -292,6 +297,16 @@
{},
};
+static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = {
+ /* Requires DMA bindings. */
+ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL),
+ OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
+ OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
+ OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
+ &db8500_prcmu_pdata),
+ {},
+};
+
static const struct of_device_id u8500_local_bus_nodes[] = {
/* only create devices below soc node */
{ .compatible = "stericsson,db8500", },
@@ -318,8 +333,13 @@
/* TODO: Export SoC, USB, cpu-freq and DMA40 */
parent = u8500_of_init_devices();
- /* automatically probe child nodes of db8500 device */
- of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
+ /* automatically probe child nodes of dbx5x0 devices */
+ if (of_machine_is_compatible("st-ericsson,u8540"))
+ of_platform_populate(NULL, u8500_local_bus_nodes,
+ u8540_auxdata_lookup, parent);
+ else
+ of_platform_populate(NULL, u8500_local_bus_nodes,
+ u8500_auxdata_lookup, parent);
}
static const char * stericsson_dt_platform_compat[] = {
diff --git a/drivers/crypto/ux500/cryp/cryp_core.c b/drivers/crypto/ux500/cryp/cryp_core.c
index 32f4806..8c2777c 100644
--- a/drivers/crypto/ux500/cryp/cryp_core.c
+++ b/drivers/crypto/ux500/cryp/cryp_core.c
@@ -1743,6 +1743,11 @@
static SIMPLE_DEV_PM_OPS(ux500_cryp_pm, ux500_cryp_suspend, ux500_cryp_resume);
+static const struct of_device_id ux500_cryp_match[] = {
+ { .compatible = "stericsson,ux500-cryp" },
+ { },
+};
+
static struct platform_driver cryp_driver = {
.probe = ux500_cryp_probe,
.remove = ux500_cryp_remove,
@@ -1750,6 +1755,7 @@
.driver = {
.owner = THIS_MODULE,
.name = "cryp1",
+ .of_match_table = ux500_cryp_match,
.pm = &ux500_cryp_pm,
}
};
diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c
index cf55089..3b8f661 100644
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -1961,6 +1961,11 @@
static SIMPLE_DEV_PM_OPS(ux500_hash_pm, ux500_hash_suspend, ux500_hash_resume);
+static const struct of_device_id ux500_hash_match[] = {
+ { .compatible = "stericsson,ux500-hash" },
+ { },
+};
+
static struct platform_driver hash_driver = {
.probe = ux500_hash_probe,
.remove = ux500_hash_remove,
@@ -1968,6 +1973,7 @@
.driver = {
.owner = THIS_MODULE,
.name = "hash1",
+ .of_match_table = ux500_hash_match,
.pm = &ux500_hash_pm,
}
};
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 3428175..7c44f1a5 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -2108,11 +2108,11 @@
.data = (void *)PINCTRL_NMK_STN8815,
},
{
- .compatible = "stericsson,nmk-pinctrl",
+ .compatible = "stericsson,db8500-pinctrl",
.data = (void *)PINCTRL_NMK_DB8500,
},
{
- .compatible = "stericsson,nmk-pinctrl-db8540",
+ .compatible = "stericsson,db8540-pinctrl",
.data = (void *)PINCTRL_NMK_DB8540,
},
{},
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index f6656b8..a19045e 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -2901,7 +2901,7 @@
{ .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, },
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, },
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
- { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
+ { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
{ .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8500_LDO_DMIC, },
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, },
};
@@ -2917,7 +2917,7 @@
{ .name = "ab8500_ldo_adc", .driver_data = (void *) AB8505_LDO_ADC, },
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB8505_LDO_AUDIO, },
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8505_LDO_ANAMIC1, },
- { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8505_LDO_ANAMIC2, },
+ { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8505_LDO_ANAMIC2, },
{ .name = "ab8500_ldo_aux8", .driver_data = (void *) AB8505_LDO_AUX8, },
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB8505_LDO_ANA, },
};
@@ -2933,7 +2933,7 @@
{ .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8540_LDO_TVOUT, },
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB8540_LDO_AUDIO, },
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8540_LDO_ANAMIC1, },
- { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8540_LDO_ANAMIC2, },
+ { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB8540_LDO_ANAMIC2, },
{ .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8540_LDO_DMIC, },
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB8540_LDO_ANA, },
{ .name = "ab8500_ldo_sdio", .driver_data = (void *) AB8540_LDO_SDIO, },
@@ -2948,7 +2948,7 @@
{ .name = "ab8500_ldo_tvout", .driver_data = (void *) AB9540_LDO_TVOUT, },
{ .name = "ab8500_ldo_audio", .driver_data = (void *) AB9540_LDO_AUDIO, },
{ .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB9540_LDO_ANAMIC1, },
- { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB9540_LDO_ANAMIC2, },
+ { .name = "ab8500_ldo_anamic2", .driver_data = (void *) AB9540_LDO_ANAMIC2, },
{ .name = "ab8500_ldo_dmic", .driver_data = (void *) AB9540_LDO_DMIC, },
{ .name = "ab8500_ldo_ana", .driver_data = (void *) AB9540_LDO_ANA, },
};