Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: kill spurious NCQ completion detection
ahci: don't attach if ICH6 is in combined mode
ata_piix: add Toshiba Tecra M4 to broken suspend list
ahci: fix engine reset failed message
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 4688dbf..54f38c2 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -193,6 +193,8 @@
ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
ATA_FLAG_IPM,
AHCI_LFLAG_COMMON = ATA_LFLAG_SKIP_D2H_BSY,
+
+ ICH_MAP = 0x90, /* ICH MAP register */
};
struct ahci_cmd_hdr {
@@ -1271,9 +1273,9 @@
/* prepare for SRST (AHCI-1.1 10.4.1) */
rc = ahci_kick_engine(ap, 1);
- if (rc)
+ if (rc && rc != -EOPNOTSUPP)
ata_link_printk(link, KERN_WARNING,
- "failed to reset engine (errno=%d)", rc);
+ "failed to reset engine (errno=%d)\n", rc);
ata_tf_init(link->device, &tf);
@@ -1638,7 +1640,7 @@
struct ahci_host_priv *hpriv = ap->host->private_data;
int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
u32 status, qc_active;
- int rc, known_irq = 0;
+ int rc;
status = readl(port_mmio + PORT_IRQ_STAT);
writel(status, port_mmio + PORT_IRQ_STAT);
@@ -1696,80 +1698,12 @@
rc = ata_qc_complete_multiple(ap, qc_active, NULL);
- /* If resetting, spurious or invalid completions are expected,
- * return unconditionally.
- */
- if (resetting)
- return;
-
- if (rc > 0)
- return;
- if (rc < 0) {
+ /* while resetting, invalid completions are expected */
+ if (unlikely(rc < 0 && !resetting)) {
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_SOFTRESET;
ata_port_freeze(ap);
- return;
}
-
- /* hmmm... a spurious interrupt */
-
- /* if !NCQ, ignore. No modern ATA device has broken HSM
- * implementation for non-NCQ commands.
- */
- if (!ap->link.sactive)
- return;
-
- if (status & PORT_IRQ_D2H_REG_FIS) {
- if (!pp->ncq_saw_d2h)
- ata_port_printk(ap, KERN_INFO,
- "D2H reg with I during NCQ, "
- "this message won't be printed again\n");
- pp->ncq_saw_d2h = 1;
- known_irq = 1;
- }
-
- if (status & PORT_IRQ_DMAS_FIS) {
- if (!pp->ncq_saw_dmas)
- ata_port_printk(ap, KERN_INFO,
- "DMAS FIS during NCQ, "
- "this message won't be printed again\n");
- pp->ncq_saw_dmas = 1;
- known_irq = 1;
- }
-
- if (status & PORT_IRQ_SDB_FIS) {
- const __le32 *f = pp->rx_fis + RX_FIS_SDB;
-
- if (le32_to_cpu(f[1])) {
- /* SDB FIS containing spurious completions
- * might be dangerous, whine and fail commands
- * with HSM violation. EH will turn off NCQ
- * after several such failures.
- */
- ata_ehi_push_desc(ehi,
- "spurious completions during NCQ "
- "issue=0x%x SAct=0x%x FIS=%08x:%08x",
- readl(port_mmio + PORT_CMD_ISSUE),
- readl(port_mmio + PORT_SCR_ACT),
- le32_to_cpu(f[0]), le32_to_cpu(f[1]));
- ehi->err_mask |= AC_ERR_HSM;
- ehi->action |= ATA_EH_SOFTRESET;
- ata_port_freeze(ap);
- } else {
- if (!pp->ncq_saw_sdb)
- ata_port_printk(ap, KERN_INFO,
- "spurious SDB FIS %08x:%08x during NCQ, "
- "this message won't be printed again\n",
- le32_to_cpu(f[0]), le32_to_cpu(f[1]));
- pp->ncq_saw_sdb = 1;
- }
- known_irq = 1;
- }
-
- if (!known_irq)
- ata_port_printk(ap, KERN_INFO, "spurious interrupt "
- "(irq_stat 0x%x active_tag 0x%x sactive 0x%x)\n",
- status, ap->link.active_tag, ap->link.sactive);
}
static void ahci_irq_clear(struct ata_port *ap)
@@ -2273,6 +2207,22 @@
if (rc)
return rc;
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ (pdev->device == 0x2652 || pdev->device == 0x2653)) {
+ u8 map;
+
+ /* ICH6s share the same PCI ID for both piix and ahci
+ * modes. Enabling ahci mode while MAP indicates
+ * combined mode is a bad idea. Yield to ata_piix.
+ */
+ pci_read_config_byte(pdev, ICH_MAP, &map);
+ if (map & 0x3) {
+ dev_printk(KERN_INFO, &pdev->dev, "controller is in "
+ "combined mode, can't enable AHCI mode\n");
+ return -ENODEV;
+ }
+ }
+
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index b538e1d..bb62a588f 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -974,6 +974,13 @@
},
},
{
+ .ident = "TECRA M4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M4"),
+ },
+ },
+ {
.ident = "TECRA M5",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b514a80..e4dea86 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4140,6 +4140,7 @@
/* Devices where NCQ should be avoided */
/* NCQ is slow */
{ "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ },
+ { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
/* http://thread.gmane.org/gmane.linux.ide/14907 */
{ "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
/* NCQ is broken */
@@ -4154,23 +4155,6 @@
{ "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
{ "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, },
{ "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, },
- /* Drives which do spurious command completion */
- { "HTS541680J9SA00", "SB2IC7EP", ATA_HORKAGE_NONCQ, },
- { "HTS541612J9SA00", "SBDIC7JP", ATA_HORKAGE_NONCQ, },
- { "HDT722516DLA380", "V43OA96A", ATA_HORKAGE_NONCQ, },
- { "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, },
- { "Hitachi HTS542525K9SA00", "BBFOC31P", ATA_HORKAGE_NONCQ, },
- { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
- { "WDC WD3200AAJS-00RYA0", "12.01B01", ATA_HORKAGE_NONCQ, },
- { "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ, },
- { "ST9120822AS", "3.CLF", ATA_HORKAGE_NONCQ, },
- { "ST9160821AS", "3.CLF", ATA_HORKAGE_NONCQ, },
- { "ST9160821AS", "3.ALD", ATA_HORKAGE_NONCQ, },
- { "ST9160821AS", "3.CCD", ATA_HORKAGE_NONCQ, },
- { "ST3160812AS", "3.ADJ", ATA_HORKAGE_NONCQ, },
- { "ST980813AS", "3.ADB", ATA_HORKAGE_NONCQ, },
- { "SAMSUNG HD401LJ", "ZZ100-15", ATA_HORKAGE_NONCQ, },
- { "Maxtor 7V300F0", "VA111900", ATA_HORKAGE_NONCQ, },
/* devices which puke on READ_NATIVE_MAX */
{ "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, },