pcmcia: assert locking to struct pcmcia_device
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index f0de7b8..b2df041 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -191,14 +191,18 @@
return -EINVAL;
s = p_dev->socket;
+
+ mutex_lock(&s->ops_mutex);
c = p_dev->function_config;
if (!(c->state & CONFIG_LOCKED)) {
dev_dbg(&s->dev, "Configuration isnt't locked\n");
+ mutex_unlock(&s->ops_mutex);
return -EACCES;
}
addr = (c->ConfigBase + reg->Offset) >> 1;
+ mutex_unlock(&s->ops_mutex);
switch (reg->Action) {
case CS_READ:
@@ -254,19 +258,22 @@
config_t *c;
s = p_dev->socket;
+
+ mutex_lock(&s->ops_mutex);
c = p_dev->function_config;
if (!(s->state & SOCKET_PRESENT)) {
dev_dbg(&s->dev, "No card present\n");
+ mutex_unlock(&s->ops_mutex);
return -ENODEV;
}
if (!(c->state & CONFIG_LOCKED)) {
dev_dbg(&s->dev, "Configuration isnt't locked\n");
+ mutex_unlock(&s->ops_mutex);
return -EACCES;
}
if (mod->Attributes & CONF_IRQ_CHANGE_VALID) {
- mutex_lock(&s->ops_mutex);
if (mod->Attributes & CONF_ENABLE_IRQ) {
c->Attributes |= CONF_ENABLE_IRQ;
s->socket.io_irq = s->irq.AssignedIRQ;
@@ -275,7 +282,6 @@
s->socket.io_irq = 0;
}
s->ops->set_socket(s, &s->socket);
- mutex_unlock(&s->ops_mutex);
}
if (mod->Attributes & CONF_VCC_CHANGE_VALID) {
@@ -288,9 +294,9 @@
(mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
if (mod->Vpp1 != mod->Vpp2) {
dev_dbg(&s->dev, "Vpp1 and Vpp2 must be the same\n");
+ mutex_unlock(&s->ops_mutex);
return -EINVAL;
}
- mutex_lock(&s->ops_mutex);
s->socket.Vpp = mod->Vpp1;
if (s->ops->set_socket(s, &s->socket)) {
mutex_unlock(&s->ops_mutex);
@@ -298,10 +304,10 @@
"Unable to set VPP\n");
return -EIO;
}
- mutex_unlock(&s->ops_mutex);
} else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) ||
(mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
dev_dbg(&s->dev, "changing Vcc is not allowed at this time\n");
+ mutex_unlock(&s->ops_mutex);
return -EINVAL;
}
@@ -311,7 +317,6 @@
int i;
io_on.speed = io_speed;
- mutex_lock(&s->ops_mutex);
for (i = 0; i < MAX_IO_WIN; i++) {
if (!s->io[i].res)
continue;
@@ -326,8 +331,8 @@
mdelay(40);
s->ops->set_io_map(s, &io_on);
}
- mutex_unlock(&s->ops_mutex);
}
+ mutex_unlock(&s->ops_mutex);
return 0;
} /* modify_configuration */
@@ -338,10 +343,11 @@
{
pccard_io_map io = { 0, 0, 0, 0, 1 };
struct pcmcia_socket *s = p_dev->socket;
- config_t *c = p_dev->function_config;
+ config_t *c;
int i;
mutex_lock(&s->ops_mutex);
+ c = p_dev->function_config;
if (p_dev->_locked) {
p_dev->_locked = 0;
if (--(s->lock_count) == 0) {
@@ -381,10 +387,14 @@
static int pcmcia_release_io(struct pcmcia_device *p_dev, io_req_t *req)
{
struct pcmcia_socket *s = p_dev->socket;
- config_t *c = p_dev->function_config;
+ int ret = -EINVAL;
+ config_t *c;
+
+ mutex_lock(&s->ops_mutex);
+ c = p_dev->function_config;
if (!p_dev->_io)
- return -EINVAL;
+ goto out;
p_dev->_io = 0;
@@ -392,7 +402,7 @@
(c->io.NumPorts1 != req->NumPorts1) ||
(c->io.BasePort2 != req->BasePort2) ||
(c->io.NumPorts2 != req->NumPorts2))
- return -EINVAL;
+ goto out;
c->state &= ~CONFIG_IO_REQ;
@@ -400,30 +410,38 @@
if (req->NumPorts2)
release_io_space(s, req->BasePort2, req->NumPorts2);
- return 0;
+out:
+ mutex_unlock(&s->ops_mutex);
+
+ return ret;
} /* pcmcia_release_io */
static int pcmcia_release_irq(struct pcmcia_device *p_dev, irq_req_t *req)
{
struct pcmcia_socket *s = p_dev->socket;
- config_t *c = p_dev->function_config;
+ config_t *c;
+ int ret = -EINVAL;
+
+ mutex_lock(&s->ops_mutex);
+
+ c = p_dev->function_config;
if (!p_dev->_irq)
- return -EINVAL;
+ goto out;
+
p_dev->_irq = 0;
if (c->state & CONFIG_LOCKED)
- return -EACCES;
+ goto out;
+
if (c->irq.Attributes != req->Attributes) {
dev_dbg(&s->dev, "IRQ attributes must match assigned ones\n");
- return -EINVAL;
+ goto out;
}
- mutex_lock(&s->ops_mutex);
if (s->irq.AssignedIRQ != req->AssignedIRQ) {
- mutex_unlock(&s->ops_mutex);
dev_dbg(&s->dev, "IRQ must match assigned one\n");
- return -EINVAL;
+ goto out;
}
if (--s->irq.Config == 0) {
c->state &= ~CONFIG_IRQ_REQ;
@@ -436,9 +454,12 @@
#ifdef CONFIG_PCMCIA_PROBE
pcmcia_used_irq[req->AssignedIRQ]--;
#endif
+ ret = 0;
+
+out:
mutex_unlock(&s->ops_mutex);
- return 0;
+ return ret;
} /* pcmcia_release_irq */
@@ -495,13 +516,15 @@
dev_dbg(&s->dev, "IntType may not be INT_CARDBUS\n");
return -EINVAL;
}
+
+ mutex_lock(&s->ops_mutex);
c = p_dev->function_config;
if (c->state & CONFIG_LOCKED) {
+ mutex_unlock(&s->ops_mutex);
dev_dbg(&s->dev, "Configuration is locked\n");
return -EACCES;
}
- mutex_lock(&s->ops_mutex);
/* Do power control. We don't allow changes in Vcc. */
s->socket.Vpp = req->Vpp;
if (s->ops->set_socket(s, &s->socket)) {
@@ -615,58 +638,65 @@
{
struct pcmcia_socket *s = p_dev->socket;
config_t *c;
+ int ret = -EINVAL;
+
+ mutex_lock(&s->ops_mutex);
if (!(s->state & SOCKET_PRESENT)) {
dev_dbg(&s->dev, "No card present\n");
- return -ENODEV;
+ goto out;
}
if (!req)
- return -EINVAL;
+ goto out;
+
c = p_dev->function_config;
if (c->state & CONFIG_LOCKED) {
dev_dbg(&s->dev, "Configuration is locked\n");
- return -EACCES;
+ goto out;
}
if (c->state & CONFIG_IO_REQ) {
dev_dbg(&s->dev, "IO already configured\n");
- return -EBUSY;
+ goto out;
}
if (req->Attributes1 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS)) {
dev_dbg(&s->dev, "bad attribute setting for IO region 1\n");
- return -EINVAL;
+ goto out;
}
if ((req->NumPorts2 > 0) &&
(req->Attributes2 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS))) {
dev_dbg(&s->dev, "bad attribute setting for IO region 2\n");
- return -EINVAL;
+ goto out;
}
- mutex_lock(&s->ops_mutex);
dev_dbg(&s->dev, "trying to allocate resource 1\n");
- if (alloc_io_space(s, req->Attributes1, &req->BasePort1,
- req->NumPorts1, req->IOAddrLines)) {
+ ret = alloc_io_space(s, req->Attributes1, &req->BasePort1,
+ req->NumPorts1, req->IOAddrLines);
+ if (ret) {
dev_dbg(&s->dev, "allocation of resource 1 failed\n");
- mutex_unlock(&s->ops_mutex);
- return -EBUSY;
+ goto out;
}
if (req->NumPorts2) {
dev_dbg(&s->dev, "trying to allocate resource 2\n");
- if (alloc_io_space(s, req->Attributes2, &req->BasePort2,
- req->NumPorts2, req->IOAddrLines)) {
+ ret = alloc_io_space(s, req->Attributes2, &req->BasePort2,
+ req->NumPorts2, req->IOAddrLines);
+ if (ret) {
dev_dbg(&s->dev, "allocation of resource 2 failed\n");
release_io_space(s, req->BasePort1, req->NumPorts1);
- mutex_unlock(&s->ops_mutex);
- return -EBUSY;
+ goto out;
}
}
- mutex_unlock(&s->ops_mutex);
c->io = *req;
c->state |= CONFIG_IO_REQ;
p_dev->_io = 1;
- return 0;
+ dev_dbg(&s->dev, "allocating resources succeeded: %d\n", ret);
+
+out:
+ mutex_unlock(&s->ops_mutex);
+
+ return ret;
} /* pcmcia_request_io */
EXPORT_SYMBOL(pcmcia_request_io);
@@ -695,21 +725,22 @@
int ret = -EINVAL, irq = 0;
int type;
+ mutex_lock(&s->ops_mutex);
+
if (!(s->state & SOCKET_PRESENT)) {
dev_dbg(&s->dev, "No card present\n");
- return -ENODEV;
+ goto out;
}
c = p_dev->function_config;
if (c->state & CONFIG_LOCKED) {
dev_dbg(&s->dev, "Configuration is locked\n");
- return -EACCES;
+ goto out;
}
if (c->state & CONFIG_IRQ_REQ) {
dev_dbg(&s->dev, "IRQ already configured\n");
- return -EBUSY;
+ goto out;
}
- mutex_lock(&s->ops_mutex);
/* Decide what type of interrupt we are registering */
type = 0;
if (s->functions > 1) /* All of this ought to be handled higher up */
@@ -768,7 +799,7 @@
if (ret && !s->irq.AssignedIRQ) {
if (!s->pci_irq) {
dev_printk(KERN_INFO, &s->dev, "no IRQ found\n");
- return ret;
+ goto out;
}
type = IRQF_SHARED;
irq = s->pci_irq;
@@ -780,7 +811,7 @@
if (ret) {
dev_printk(KERN_INFO, &s->dev,
"request_irq() failed\n");
- return ret;
+ goto out;
}
}
@@ -803,9 +834,10 @@
pcmcia_used_irq[irq]++;
#endif
+ ret = 0;
+out:
mutex_unlock(&s->ops_mutex);
-
- return 0;
+ return ret;
} /* pcmcia_request_irq */
EXPORT_SYMBOL(pcmcia_request_irq);