| /* |
| * arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c |
| * |
| * Marvell Orion-VoIP FXO Reference Design Setup |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/pci.h> |
| #include <linux/irq.h> |
| #include <linux/mtd/physmap.h> |
| #include <linux/mv643xx_eth.h> |
| #include <linux/ethtool.h> |
| #include <net/dsa.h> |
| #include <asm/mach-types.h> |
| #include <asm/gpio.h> |
| #include <asm/leds.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/pci.h> |
| #include <mach/orion5x.h> |
| #include "common.h" |
| #include "mpp.h" |
| |
| /***************************************************************************** |
| * RD-88F5181L FXO Info |
| ****************************************************************************/ |
| /* |
| * 8M NOR flash Device bus boot chip select |
| */ |
| #define RD88F5181L_FXO_NOR_BOOT_BASE 0xff800000 |
| #define RD88F5181L_FXO_NOR_BOOT_SIZE SZ_8M |
| |
| |
| /***************************************************************************** |
| * 8M NOR Flash on Device bus Boot chip select |
| ****************************************************************************/ |
| static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = { |
| .width = 1, |
| }; |
| |
| static struct resource rd88f5181l_fxo_nor_boot_flash_resource = { |
| .flags = IORESOURCE_MEM, |
| .start = RD88F5181L_FXO_NOR_BOOT_BASE, |
| .end = RD88F5181L_FXO_NOR_BOOT_BASE + |
| RD88F5181L_FXO_NOR_BOOT_SIZE - 1, |
| }; |
| |
| static struct platform_device rd88f5181l_fxo_nor_boot_flash = { |
| .name = "physmap-flash", |
| .id = 0, |
| .dev = { |
| .platform_data = &rd88f5181l_fxo_nor_boot_flash_data, |
| }, |
| .num_resources = 1, |
| .resource = &rd88f5181l_fxo_nor_boot_flash_resource, |
| }; |
| |
| |
| /***************************************************************************** |
| * General Setup |
| ****************************************************************************/ |
| static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = { |
| { 0, MPP_GPIO }, /* LED1 CardBus LED (front panel) */ |
| { 1, MPP_GPIO }, /* PCI_intA */ |
| { 2, MPP_GPIO }, /* Hard Reset / Factory Init*/ |
| { 3, MPP_GPIO }, /* FXS or DAA select */ |
| { 4, MPP_GPIO }, /* LED6 - phone LED (front panel) */ |
| { 5, MPP_GPIO }, /* LED5 - phone LED (front panel) */ |
| { 6, MPP_PCI_CLK }, /* CPU PCI refclk */ |
| { 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */ |
| { 8, MPP_GPIO }, /* CardBus reset */ |
| { 9, MPP_GPIO }, /* GE_RXERR */ |
| { 10, MPP_GPIO }, /* LED2 MiniPCI LED (front panel) */ |
| { 11, MPP_GPIO }, /* Lifeline control */ |
| { 12, MPP_GIGE }, /* GE_TXD[4] */ |
| { 13, MPP_GIGE }, /* GE_TXD[5] */ |
| { 14, MPP_GIGE }, /* GE_TXD[6] */ |
| { 15, MPP_GIGE }, /* GE_TXD[7] */ |
| { 16, MPP_GIGE }, /* GE_RXD[4] */ |
| { 17, MPP_GIGE }, /* GE_RXD[5] */ |
| { 18, MPP_GIGE }, /* GE_RXD[6] */ |
| { 19, MPP_GIGE }, /* GE_RXD[7] */ |
| { -1 }, |
| }; |
| |
| static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = { |
| .phy_addr = MV643XX_ETH_PHY_NONE, |
| .speed = SPEED_1000, |
| .duplex = DUPLEX_FULL, |
| }; |
| |
| static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = { |
| .port_names[0] = "lan2", |
| .port_names[1] = "lan1", |
| .port_names[2] = "wan", |
| .port_names[3] = "cpu", |
| .port_names[5] = "lan4", |
| .port_names[7] = "lan3", |
| }; |
| |
| static struct dsa_platform_data rd88f5181l_fxo_switch_plat_data = { |
| .nr_chips = 1, |
| .chip = &rd88f5181l_fxo_switch_chip_data, |
| }; |
| |
| static void __init rd88f5181l_fxo_init(void) |
| { |
| /* |
| * Setup basic Orion functions. Need to be called early. |
| */ |
| orion5x_init(); |
| |
| orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes); |
| |
| /* |
| * Configure peripherals. |
| */ |
| orion5x_ehci0_init(); |
| orion5x_eth_init(&rd88f5181l_fxo_eth_data); |
| orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ); |
| orion5x_uart0_init(); |
| |
| orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE, |
| RD88F5181L_FXO_NOR_BOOT_SIZE); |
| platform_device_register(&rd88f5181l_fxo_nor_boot_flash); |
| } |
| |
| static int __init |
| rd88f5181l_fxo_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| int irq; |
| |
| /* |
| * Check for devices with hard-wired IRQs. |
| */ |
| irq = orion5x_pci_map_irq(dev, slot, pin); |
| if (irq != -1) |
| return irq; |
| |
| /* |
| * Mini-PCI / Cardbus slot. |
| */ |
| return gpio_to_irq(1); |
| } |
| |
| static struct hw_pci rd88f5181l_fxo_pci __initdata = { |
| .nr_controllers = 2, |
| .swizzle = pci_std_swizzle, |
| .setup = orion5x_pci_sys_setup, |
| .scan = orion5x_pci_sys_scan_bus, |
| .map_irq = rd88f5181l_fxo_pci_map_irq, |
| }; |
| |
| static int __init rd88f5181l_fxo_pci_init(void) |
| { |
| if (machine_is_rd88f5181l_fxo()) { |
| orion5x_pci_set_cardbus_mode(); |
| pci_common_init(&rd88f5181l_fxo_pci); |
| } |
| |
| return 0; |
| } |
| subsys_initcall(rd88f5181l_fxo_pci_init); |
| |
| MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design") |
| /* Maintainer: Nicolas Pitre <nico@marvell.com> */ |
| .boot_params = 0x00000100, |
| .init_machine = rd88f5181l_fxo_init, |
| .map_io = orion5x_map_io, |
| .init_early = orion5x_init_early, |
| .init_irq = orion5x_init_irq, |
| .timer = &orion5x_timer, |
| .fixup = tag_fixup_mem32, |
| MACHINE_END |