| /* |
| * Driver for Motorola/Freescale IMX serial ports |
| * |
| * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. |
| * |
| * Author: Sascha Hauer <sascha@saschahauer.de> |
| * Copyright (C) 2004 Pengutronix |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) |
| #define SUPPORT_SYSRQ |
| #endif |
| |
| #include <linux/module.h> |
| #include <linux/ioport.h> |
| #include <linux/init.h> |
| #include <linux/console.h> |
| #include <linux/sysrq.h> |
| #include <linux/platform_device.h> |
| #include <linux/tty.h> |
| #include <linux/tty_flip.h> |
| #include <linux/serial_core.h> |
| #include <linux/serial.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/rational.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/io.h> |
| #include <linux/dma-mapping.h> |
| |
| #include <asm/irq.h> |
| #include <linux/platform_data/serial-imx.h> |
| #include <linux/platform_data/dma-imx.h> |
| |
| /* Register definitions */ |
| #define URXD0 0x0 /* Receiver Register */ |
| #define URTX0 0x40 /* Transmitter Register */ |
| #define UCR1 0x80 /* Control Register 1 */ |
| #define UCR2 0x84 /* Control Register 2 */ |
| #define UCR3 0x88 /* Control Register 3 */ |
| #define UCR4 0x8c /* Control Register 4 */ |
| #define UFCR 0x90 /* FIFO Control Register */ |
| #define USR1 0x94 /* Status Register 1 */ |
| #define USR2 0x98 /* Status Register 2 */ |
| #define UESC 0x9c /* Escape Character Register */ |
| #define UTIM 0xa0 /* Escape Timer Register */ |
| #define UBIR 0xa4 /* BRM Incremental Register */ |
| #define UBMR 0xa8 /* BRM Modulator Register */ |
| #define UBRC 0xac /* Baud Rate Count Register */ |
| #define IMX21_ONEMS 0xb0 /* One Millisecond register */ |
| #define IMX1_UTS 0xd0 /* UART Test Register on i.mx1 */ |
| #define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/ |
| |
| /* UART Control Register Bit Fields.*/ |
| #define URXD_DUMMY_READ (1<<16) |
| #define URXD_CHARRDY (1<<15) |
| #define URXD_ERR (1<<14) |
| #define URXD_OVRRUN (1<<13) |
| #define URXD_FRMERR (1<<12) |
| #define URXD_BRK (1<<11) |
| #define URXD_PRERR (1<<10) |
| #define URXD_RX_DATA (0xFF<<0) |
| #define UCR1_ADEN (1<<15) /* Auto detect interrupt */ |
| #define UCR1_ADBR (1<<14) /* Auto detect baud rate */ |
| #define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ |
| #define UCR1_IDEN (1<<12) /* Idle condition interrupt */ |
| #define UCR1_ICD_REG(x) (((x) & 3) << 10) /* idle condition detect */ |
| #define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ |
| #define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ |
| #define UCR1_IREN (1<<7) /* Infrared interface enable */ |
| #define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ |
| #define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ |
| #define UCR1_SNDBRK (1<<4) /* Send break */ |
| #define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ |
| #define IMX1_UCR1_UARTCLKEN (1<<2) /* UART clock enabled, i.mx1 only */ |
| #define UCR1_ATDMAEN (1<<2) /* Aging DMA Timer Enable */ |
| #define UCR1_DOZE (1<<1) /* Doze */ |
| #define UCR1_UARTEN (1<<0) /* UART enabled */ |
| #define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ |
| #define UCR2_IRTS (1<<14) /* Ignore RTS pin */ |
| #define UCR2_CTSC (1<<13) /* CTS pin control */ |
| #define UCR2_CTS (1<<12) /* Clear to send */ |
| #define UCR2_ESCEN (1<<11) /* Escape enable */ |
| #define UCR2_PREN (1<<8) /* Parity enable */ |
| #define UCR2_PROE (1<<7) /* Parity odd/even */ |
| #define UCR2_STPB (1<<6) /* Stop */ |
| #define UCR2_WS (1<<5) /* Word size */ |
| #define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ |
| #define UCR2_ATEN (1<<3) /* Aging Timer Enable */ |
| #define UCR2_TXEN (1<<2) /* Transmitter enabled */ |
| #define UCR2_RXEN (1<<1) /* Receiver enabled */ |
| #define UCR2_SRST (1<<0) /* SW reset */ |
| #define UCR3_DTREN (1<<13) /* DTR interrupt enable */ |
| #define UCR3_PARERREN (1<<12) /* Parity enable */ |
| #define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ |
| #define UCR3_DSR (1<<10) /* Data set ready */ |
| #define UCR3_DCD (1<<9) /* Data carrier detect */ |
| #define UCR3_RI (1<<8) /* Ring indicator */ |
| #define UCR3_ADNIMP (1<<7) /* Autobaud Detection Not Improved */ |
| #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ |
| #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ |
| #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ |
| #define IMX21_UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select */ |
| #define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ |
| #define UCR3_BPEN (1<<0) /* Preset registers enable */ |
| #define UCR4_CTSTL_SHF 10 /* CTS trigger level shift */ |
| #define UCR4_CTSTL_MASK 0x3F /* CTS trigger is 6 bits wide */ |
| #define UCR4_INVR (1<<9) /* Inverted infrared reception */ |
| #define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ |
| #define UCR4_WKEN (1<<7) /* Wake interrupt enable */ |
| #define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ |
| #define UCR4_IDDMAEN (1<<6) /* DMA IDLE Condition Detected */ |
| #define UCR4_IRSC (1<<5) /* IR special case */ |
| #define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ |
| #define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ |
| #define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ |
| #define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ |
| #define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ |
| #define UFCR_DCEDTE (1<<6) /* DCE/DTE mode select */ |
| #define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ |
| #define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7) |
| #define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ |
| #define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ |
| #define USR1_RTSS (1<<14) /* RTS pin status */ |
| #define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ |
| #define USR1_RTSD (1<<12) /* RTS delta */ |
| #define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ |
| #define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ |
| #define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ |
| #define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ |
| #define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ |
| #define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ |
| #define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ |
| #define USR2_ADET (1<<15) /* Auto baud rate detect complete */ |
| #define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ |
| #define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ |
| #define USR2_IDLE (1<<12) /* Idle condition */ |
| #define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ |
| #define USR2_WAKE (1<<7) /* Wake */ |
| #define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ |
| #define USR2_TXDC (1<<3) /* Transmitter complete */ |
| #define USR2_BRCD (1<<2) /* Break condition */ |
| #define USR2_ORE (1<<1) /* Overrun error */ |
| #define USR2_RDR (1<<0) /* Recv data ready */ |
| #define UTS_FRCPERR (1<<13) /* Force parity error */ |
| #define UTS_LOOP (1<<12) /* Loop tx and rx */ |
| #define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ |
| #define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ |
| #define UTS_TXFULL (1<<4) /* TxFIFO full */ |
| #define UTS_RXFULL (1<<3) /* RxFIFO full */ |
| #define UTS_SOFTRST (1<<0) /* Software reset */ |
| |
| /* We've been assigned a range on the "Low-density serial ports" major */ |
| #define SERIAL_IMX_MAJOR 207 |
| #define MINOR_START 16 |
| #define DEV_NAME "ttymxc" |
| |
| /* |
| * This determines how often we check the modem status signals |
| * for any change. They generally aren't connected to an IRQ |
| * so we have to poll them. We also check immediately before |
| * filling the TX fifo incase CTS has been dropped. |
| */ |
| #define MCTRL_TIMEOUT (250*HZ/1000) |
| |
| #define DRIVER_NAME "IMX-uart" |
| |
| #define UART_NR 8 |
| |
| /* i.MX21 type uart runs on all i.mx except i.MX1 and i.MX6q */ |
| enum imx_uart_type { |
| IMX1_UART, |
| IMX21_UART, |
| IMX6Q_UART, |
| }; |
| |
| /* device type dependent stuff */ |
| struct imx_uart_data { |
| unsigned uts_reg; |
| enum imx_uart_type devtype; |
| }; |
| |
| struct imx_port { |
| struct uart_port port; |
| struct timer_list timer; |
| unsigned int old_status; |
| unsigned int have_rtscts:1; |
| unsigned int dte_mode:1; |
| unsigned int irda_inv_rx:1; |
| unsigned int irda_inv_tx:1; |
| unsigned short trcv_delay; /* transceiver delay */ |
| struct clk *clk_ipg; |
| struct clk *clk_per; |
| const struct imx_uart_data *devdata; |
| |
| /* DMA fields */ |
| unsigned int dma_is_inited:1; |
| unsigned int dma_is_enabled:1; |
| unsigned int dma_is_rxing:1; |
| unsigned int dma_is_txing:1; |
| struct dma_chan *dma_chan_rx, *dma_chan_tx; |
| struct scatterlist rx_sgl, tx_sgl[2]; |
| void *rx_buf; |
| unsigned int tx_bytes; |
| unsigned int dma_tx_nents; |
| wait_queue_head_t dma_wait; |
| }; |
| |
| struct imx_port_ucrs { |
| unsigned int ucr1; |
| unsigned int ucr2; |
| unsigned int ucr3; |
| }; |
| |
| static struct imx_uart_data imx_uart_devdata[] = { |
| [IMX1_UART] = { |
| .uts_reg = IMX1_UTS, |
| .devtype = IMX1_UART, |
| }, |
| [IMX21_UART] = { |
| .uts_reg = IMX21_UTS, |
| .devtype = IMX21_UART, |
| }, |
| [IMX6Q_UART] = { |
| .uts_reg = IMX21_UTS, |
| .devtype = IMX6Q_UART, |
| }, |
| }; |
| |
| static const struct platform_device_id imx_uart_devtype[] = { |
| { |
| .name = "imx1-uart", |
| .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX1_UART], |
| }, { |
| .name = "imx21-uart", |
| .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX21_UART], |
| }, { |
| .name = "imx6q-uart", |
| .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX6Q_UART], |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(platform, imx_uart_devtype); |
| |
| static const struct of_device_id imx_uart_dt_ids[] = { |
| { .compatible = "fsl,imx6q-uart", .data = &imx_uart_devdata[IMX6Q_UART], }, |
| { .compatible = "fsl,imx1-uart", .data = &imx_uart_devdata[IMX1_UART], }, |
| { .compatible = "fsl,imx21-uart", .data = &imx_uart_devdata[IMX21_UART], }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, imx_uart_dt_ids); |
| |
| static inline unsigned uts_reg(struct imx_port *sport) |
| { |
| return sport->devdata->uts_reg; |
| } |
| |
| static inline int is_imx1_uart(struct imx_port *sport) |
| { |
| return sport->devdata->devtype == IMX1_UART; |
| } |
| |
| static inline int is_imx21_uart(struct imx_port *sport) |
| { |
| return sport->devdata->devtype == IMX21_UART; |
| } |
| |
| static inline int is_imx6q_uart(struct imx_port *sport) |
| { |
| return sport->devdata->devtype == IMX6Q_UART; |
| } |
| /* |
| * Save and restore functions for UCR1, UCR2 and UCR3 registers |
| */ |
| #if defined(CONFIG_SERIAL_IMX_CONSOLE) |
| static void imx_port_ucrs_save(struct uart_port *port, |
| struct imx_port_ucrs *ucr) |
| { |
| /* save control registers */ |
| ucr->ucr1 = readl(port->membase + UCR1); |
| ucr->ucr2 = readl(port->membase + UCR2); |
| ucr->ucr3 = readl(port->membase + UCR3); |
| } |
| |
| static void imx_port_ucrs_restore(struct uart_port *port, |
| struct imx_port_ucrs *ucr) |
| { |
| /* restore control registers */ |
| writel(ucr->ucr1, port->membase + UCR1); |
| writel(ucr->ucr2, port->membase + UCR2); |
| writel(ucr->ucr3, port->membase + UCR3); |
| } |
| #endif |
| |
| /* |
| * Handle any change of modem status signal since we were last called. |
| */ |
| static void imx_mctrl_check(struct imx_port *sport) |
| { |
| unsigned int status, changed; |
| |
| status = sport->port.ops->get_mctrl(&sport->port); |
| changed = status ^ sport->old_status; |
| |
| if (changed == 0) |
| return; |
| |
| sport->old_status = status; |
| |
| if (changed & TIOCM_RI) |
| sport->port.icount.rng++; |
| if (changed & TIOCM_DSR) |
| sport->port.icount.dsr++; |
| if (changed & TIOCM_CAR) |
| uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); |
| if (changed & TIOCM_CTS) |
| uart_handle_cts_change(&sport->port, status & TIOCM_CTS); |
| |
| wake_up_interruptible(&sport->port.state->port.delta_msr_wait); |
| } |
| |
| /* |
| * This is our per-port timeout handler, for checking the |
| * modem status signals. |
| */ |
| static void imx_timeout(unsigned long data) |
| { |
| struct imx_port *sport = (struct imx_port *)data; |
| unsigned long flags; |
| |
| if (sport->port.state) { |
| spin_lock_irqsave(&sport->port.lock, flags); |
| imx_mctrl_check(sport); |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| |
| mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); |
| } |
| } |
| |
| /* |
| * interrupts disabled on entry |
| */ |
| static void imx_stop_tx(struct uart_port *port) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| unsigned long temp; |
| |
| /* |
| * We are maybe in the SMP context, so if the DMA TX thread is running |
| * on other cpu, we have to wait for it to finish. |
| */ |
| if (sport->dma_is_enabled && sport->dma_is_txing) |
| return; |
| |
| temp = readl(port->membase + UCR1); |
| writel(temp & ~UCR1_TXMPTYEN, port->membase + UCR1); |
| |
| /* in rs485 mode disable transmitter if shifter is empty */ |
| if (port->rs485.flags & SER_RS485_ENABLED && |
| readl(port->membase + USR2) & USR2_TXDC) { |
| temp = readl(port->membase + UCR2); |
| if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND) |
| temp &= ~UCR2_CTS; |
| else |
| temp |= UCR2_CTS; |
| writel(temp, port->membase + UCR2); |
| |
| temp = readl(port->membase + UCR4); |
| temp &= ~UCR4_TCEN; |
| writel(temp, port->membase + UCR4); |
| } |
| } |
| |
| /* |
| * interrupts disabled on entry |
| */ |
| static void imx_stop_rx(struct uart_port *port) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| unsigned long temp; |
| |
| if (sport->dma_is_enabled && sport->dma_is_rxing) { |
| if (sport->port.suspended) { |
| dmaengine_terminate_all(sport->dma_chan_rx); |
| sport->dma_is_rxing = 0; |
| } else { |
| return; |
| } |
| } |
| |
| temp = readl(sport->port.membase + UCR2); |
| writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2); |
| |
| /* disable the `Receiver Ready Interrrupt` */ |
| temp = readl(sport->port.membase + UCR1); |
| writel(temp & ~UCR1_RRDYEN, sport->port.membase + UCR1); |
| } |
| |
| /* |
| * Set the modem control timer to fire immediately. |
| */ |
| static void imx_enable_ms(struct uart_port *port) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| |
| mod_timer(&sport->timer, jiffies); |
| } |
| |
| static void imx_dma_tx(struct imx_port *sport); |
| static inline void imx_transmit_buffer(struct imx_port *sport) |
| { |
| struct circ_buf *xmit = &sport->port.state->xmit; |
| unsigned long temp; |
| |
| if (sport->port.x_char) { |
| /* Send next char */ |
| writel(sport->port.x_char, sport->port.membase + URTX0); |
| sport->port.icount.tx++; |
| sport->port.x_char = 0; |
| return; |
| } |
| |
| if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { |
| imx_stop_tx(&sport->port); |
| return; |
| } |
| |
| if (sport->dma_is_enabled) { |
| /* |
| * We've just sent a X-char Ensure the TX DMA is enabled |
| * and the TX IRQ is disabled. |
| **/ |
| temp = readl(sport->port.membase + UCR1); |
| temp &= ~UCR1_TXMPTYEN; |
| if (sport->dma_is_txing) { |
| temp |= UCR1_TDMAEN; |
| writel(temp, sport->port.membase + UCR1); |
| } else { |
| writel(temp, sport->port.membase + UCR1); |
| imx_dma_tx(sport); |
| } |
| } |
| |
| while (!uart_circ_empty(xmit) && |
| !(readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)) { |
| /* send xmit->buf[xmit->tail] |
| * out the port here */ |
| writel(xmit->buf[xmit->tail], sport->port.membase + URTX0); |
| xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); |
| sport->port.icount.tx++; |
| } |
| |
| if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |
| uart_write_wakeup(&sport->port); |
| |
| if (uart_circ_empty(xmit)) |
| imx_stop_tx(&sport->port); |
| } |
| |
| static void dma_tx_callback(void *data) |
| { |
| struct imx_port *sport = data; |
| struct scatterlist *sgl = &sport->tx_sgl[0]; |
| struct circ_buf *xmit = &sport->port.state->xmit; |
| unsigned long flags; |
| unsigned long temp; |
| |
| spin_lock_irqsave(&sport->port.lock, flags); |
| |
| dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE); |
| |
| temp = readl(sport->port.membase + UCR1); |
| temp &= ~UCR1_TDMAEN; |
| writel(temp, sport->port.membase + UCR1); |
| |
| /* update the stat */ |
| xmit->tail = (xmit->tail + sport->tx_bytes) & (UART_XMIT_SIZE - 1); |
| sport->port.icount.tx += sport->tx_bytes; |
| |
| dev_dbg(sport->port.dev, "we finish the TX DMA.\n"); |
| |
| sport->dma_is_txing = 0; |
| |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| |
| if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |
| uart_write_wakeup(&sport->port); |
| |
| if (waitqueue_active(&sport->dma_wait)) { |
| wake_up(&sport->dma_wait); |
| dev_dbg(sport->port.dev, "exit in %s.\n", __func__); |
| return; |
| } |
| |
| spin_lock_irqsave(&sport->port.lock, flags); |
| if (!uart_circ_empty(xmit) && !uart_tx_stopped(&sport->port)) |
| imx_dma_tx(sport); |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| } |
| |
| static void imx_dma_tx(struct imx_port *sport) |
| { |
| struct circ_buf *xmit = &sport->port.state->xmit; |
| struct scatterlist *sgl = sport->tx_sgl; |
| struct dma_async_tx_descriptor *desc; |
| struct dma_chan *chan = sport->dma_chan_tx; |
| struct device *dev = sport->port.dev; |
| unsigned long temp; |
| int ret; |
| |
| if (sport->dma_is_txing) |
| return; |
| |
| sport->tx_bytes = uart_circ_chars_pending(xmit); |
| |
| if (xmit->tail < xmit->head) { |
| sport->dma_tx_nents = 1; |
| sg_init_one(sgl, xmit->buf + xmit->tail, sport->tx_bytes); |
| } else { |
| sport->dma_tx_nents = 2; |
| sg_init_table(sgl, 2); |
| sg_set_buf(sgl, xmit->buf + xmit->tail, |
| UART_XMIT_SIZE - xmit->tail); |
| sg_set_buf(sgl + 1, xmit->buf, xmit->head); |
| } |
| |
| ret = dma_map_sg(dev, sgl, sport->dma_tx_nents, DMA_TO_DEVICE); |
| if (ret == 0) { |
| dev_err(dev, "DMA mapping error for TX.\n"); |
| return; |
| } |
| desc = dmaengine_prep_slave_sg(chan, sgl, sport->dma_tx_nents, |
| DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); |
| if (!desc) { |
| dma_unmap_sg(dev, sgl, sport->dma_tx_nents, |
| DMA_TO_DEVICE); |
| dev_err(dev, "We cannot prepare for the TX slave dma!\n"); |
| return; |
| } |
| desc->callback = dma_tx_callback; |
| desc->callback_param = sport; |
| |
| dev_dbg(dev, "TX: prepare to send %lu bytes by DMA.\n", |
| uart_circ_chars_pending(xmit)); |
| |
| temp = readl(sport->port.membase + UCR1); |
| temp |= UCR1_TDMAEN; |
| writel(temp, sport->port.membase + UCR1); |
| |
| /* fire it */ |
| sport->dma_is_txing = 1; |
| dmaengine_submit(desc); |
| dma_async_issue_pending(chan); |
| return; |
| } |
| |
| /* |
| * interrupts disabled on entry |
| */ |
| static void imx_start_tx(struct uart_port *port) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| unsigned long temp; |
| |
| if (port->rs485.flags & SER_RS485_ENABLED) { |
| /* enable transmitter and shifter empty irq */ |
| temp = readl(port->membase + UCR2); |
| if (port->rs485.flags & SER_RS485_RTS_ON_SEND) |
| temp &= ~UCR2_CTS; |
| else |
| temp |= UCR2_CTS; |
| writel(temp, port->membase + UCR2); |
| |
| temp = readl(port->membase + UCR4); |
| temp |= UCR4_TCEN; |
| writel(temp, port->membase + UCR4); |
| } |
| |
| if (!sport->dma_is_enabled) { |
| temp = readl(sport->port.membase + UCR1); |
| writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1); |
| } |
| |
| if (sport->dma_is_enabled) { |
| if (sport->port.x_char) { |
| /* We have X-char to send, so enable TX IRQ and |
| * disable TX DMA to let TX interrupt to send X-char */ |
| temp = readl(sport->port.membase + UCR1); |
| temp &= ~UCR1_TDMAEN; |
| temp |= UCR1_TXMPTYEN; |
| writel(temp, sport->port.membase + UCR1); |
| return; |
| } |
| |
| if (!uart_circ_empty(&port->state->xmit) && |
| !uart_tx_stopped(port)) |
| imx_dma_tx(sport); |
| return; |
| } |
| } |
| |
| static irqreturn_t imx_rtsint(int irq, void *dev_id) |
| { |
| struct imx_port *sport = dev_id; |
| unsigned int val; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&sport->port.lock, flags); |
| |
| writel(USR1_RTSD, sport->port.membase + USR1); |
| val = readl(sport->port.membase + USR1) & USR1_RTSS; |
| uart_handle_cts_change(&sport->port, !!val); |
| wake_up_interruptible(&sport->port.state->port.delta_msr_wait); |
| |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t imx_txint(int irq, void *dev_id) |
| { |
| struct imx_port *sport = dev_id; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&sport->port.lock, flags); |
| imx_transmit_buffer(sport); |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t imx_rxint(int irq, void *dev_id) |
| { |
| struct imx_port *sport = dev_id; |
| unsigned int rx, flg, ignored = 0; |
| struct tty_port *port = &sport->port.state->port; |
| unsigned long flags, temp; |
| |
| spin_lock_irqsave(&sport->port.lock, flags); |
| |
| while (readl(sport->port.membase + USR2) & USR2_RDR) { |
| flg = TTY_NORMAL; |
| sport->port.icount.rx++; |
| |
| rx = readl(sport->port.membase + URXD0); |
| |
| temp = readl(sport->port.membase + USR2); |
| if (temp & USR2_BRCD) { |
| writel(USR2_BRCD, sport->port.membase + USR2); |
| if (uart_handle_break(&sport->port)) |
| continue; |
| } |
| |
| if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx)) |
| continue; |
| |
| if (unlikely(rx & URXD_ERR)) { |
| if (rx & URXD_BRK) |
| sport->port.icount.brk++; |
| else if (rx & URXD_PRERR) |
| sport->port.icount.parity++; |
| else if (rx & URXD_FRMERR) |
| sport->port.icount.frame++; |
| if (rx & URXD_OVRRUN) |
| sport->port.icount.overrun++; |
| |
| if (rx & sport->port.ignore_status_mask) { |
| if (++ignored > 100) |
| goto out; |
| continue; |
| } |
| |
| rx &= (sport->port.read_status_mask | 0xFF); |
| |
| if (rx & URXD_BRK) |
| flg = TTY_BREAK; |
| else if (rx & URXD_PRERR) |
| flg = TTY_PARITY; |
| else if (rx & URXD_FRMERR) |
| flg = TTY_FRAME; |
| if (rx & URXD_OVRRUN) |
| flg = TTY_OVERRUN; |
| |
| #ifdef SUPPORT_SYSRQ |
| sport->port.sysrq = 0; |
| #endif |
| } |
| |
| if (sport->port.ignore_status_mask & URXD_DUMMY_READ) |
| goto out; |
| |
| tty_insert_flip_char(port, rx, flg); |
| } |
| |
| out: |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| tty_flip_buffer_push(port); |
| return IRQ_HANDLED; |
| } |
| |
| static int start_rx_dma(struct imx_port *sport); |
| /* |
| * If the RXFIFO is filled with some data, and then we |
| * arise a DMA operation to receive them. |
| */ |
| static void imx_dma_rxint(struct imx_port *sport) |
| { |
| unsigned long temp; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&sport->port.lock, flags); |
| |
| temp = readl(sport->port.membase + USR2); |
| if ((temp & USR2_RDR) && !sport->dma_is_rxing) { |
| sport->dma_is_rxing = 1; |
| |
| /* disable the `Recerver Ready Interrrupt` */ |
| temp = readl(sport->port.membase + UCR1); |
| temp &= ~(UCR1_RRDYEN); |
| writel(temp, sport->port.membase + UCR1); |
| |
| /* tell the DMA to receive the data. */ |
| start_rx_dma(sport); |
| } |
| |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| } |
| |
| static irqreturn_t imx_int(int irq, void *dev_id) |
| { |
| struct imx_port *sport = dev_id; |
| unsigned int sts; |
| unsigned int sts2; |
| |
| sts = readl(sport->port.membase + USR1); |
| sts2 = readl(sport->port.membase + USR2); |
| |
| if (sts & USR1_RRDY) { |
| if (sport->dma_is_enabled) |
| imx_dma_rxint(sport); |
| else |
| imx_rxint(irq, dev_id); |
| } |
| |
| if ((sts & USR1_TRDY && |
| readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN) || |
| (sts2 & USR2_TXDC && |
| readl(sport->port.membase + UCR4) & UCR4_TCEN)) |
| imx_txint(irq, dev_id); |
| |
| if (sts & USR1_RTSD) |
| imx_rtsint(irq, dev_id); |
| |
| if (sts & USR1_AWAKE) |
| writel(USR1_AWAKE, sport->port.membase + USR1); |
| |
| if (sts2 & USR2_ORE) { |
| dev_err(sport->port.dev, "Rx FIFO overrun\n"); |
| sport->port.icount.overrun++; |
| writel(USR2_ORE, sport->port.membase + USR2); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Return TIOCSER_TEMT when transmitter is not busy. |
| */ |
| static unsigned int imx_tx_empty(struct uart_port *port) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| unsigned int ret; |
| |
| ret = (readl(sport->port.membase + USR2) & USR2_TXDC) ? TIOCSER_TEMT : 0; |
| |
| /* If the TX DMA is working, return 0. */ |
| if (sport->dma_is_enabled && sport->dma_is_txing) |
| ret = 0; |
| |
| return ret; |
| } |
| |
| /* |
| * We have a modem side uart, so the meanings of RTS and CTS are inverted. |
| */ |
| static unsigned int imx_get_mctrl(struct uart_port *port) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| unsigned int tmp = TIOCM_DSR | TIOCM_CAR; |
| |
| if (readl(sport->port.membase + USR1) & USR1_RTSS) |
| tmp |= TIOCM_CTS; |
| |
| if (readl(sport->port.membase + UCR2) & UCR2_CTS) |
| tmp |= TIOCM_RTS; |
| |
| if (readl(sport->port.membase + uts_reg(sport)) & UTS_LOOP) |
| tmp |= TIOCM_LOOP; |
| |
| return tmp; |
| } |
| |
| static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| unsigned long temp; |
| |
| if (!(port->rs485.flags & SER_RS485_ENABLED)) { |
| temp = readl(sport->port.membase + UCR2); |
| temp &= ~(UCR2_CTS | UCR2_CTSC); |
| if (mctrl & TIOCM_RTS) |
| temp |= UCR2_CTS | UCR2_CTSC; |
| writel(temp, sport->port.membase + UCR2); |
| } |
| |
| temp = readl(sport->port.membase + uts_reg(sport)) & ~UTS_LOOP; |
| if (mctrl & TIOCM_LOOP) |
| temp |= UTS_LOOP; |
| writel(temp, sport->port.membase + uts_reg(sport)); |
| } |
| |
| /* |
| * Interrupts always disabled. |
| */ |
| static void imx_break_ctl(struct uart_port *port, int break_state) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| unsigned long flags, temp; |
| |
| spin_lock_irqsave(&sport->port.lock, flags); |
| |
| temp = readl(sport->port.membase + UCR1) & ~UCR1_SNDBRK; |
| |
| if (break_state != 0) |
| temp |= UCR1_SNDBRK; |
| |
| writel(temp, sport->port.membase + UCR1); |
| |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| } |
| |
| #define TXTL 2 /* reset default */ |
| #define RXTL 1 /* reset default */ |
| |
| static void imx_setup_ufcr(struct imx_port *sport, unsigned int mode) |
| { |
| unsigned int val; |
| |
| /* set receiver / transmitter trigger level */ |
| val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE); |
| val |= TXTL << UFCR_TXTL_SHF | RXTL; |
| writel(val, sport->port.membase + UFCR); |
| } |
| |
| #define RX_BUF_SIZE (PAGE_SIZE) |
| static void imx_rx_dma_done(struct imx_port *sport) |
| { |
| unsigned long temp; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&sport->port.lock, flags); |
| |
| /* Enable this interrupt when the RXFIFO is empty. */ |
| temp = readl(sport->port.membase + UCR1); |
| temp |= UCR1_RRDYEN; |
| writel(temp, sport->port.membase + UCR1); |
| |
| sport->dma_is_rxing = 0; |
| |
| /* Is the shutdown waiting for us? */ |
| if (waitqueue_active(&sport->dma_wait)) |
| wake_up(&sport->dma_wait); |
| |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| } |
| |
| /* |
| * There are three kinds of RX DMA interrupts(such as in the MX6Q): |
| * [1] the RX DMA buffer is full. |
| * [2] the Aging timer expires(wait for 8 bytes long) |
| * [3] the Idle Condition Detect(enabled the UCR4_IDDMAEN). |
| * |
| * The [2] is trigger when a character was been sitting in the FIFO |
| * meanwhile [3] can wait for 32 bytes long when the RX line is |
| * on IDLE state and RxFIFO is empty. |
| */ |
| static void dma_rx_callback(void *data) |
| { |
| struct imx_port *sport = data; |
| struct dma_chan *chan = sport->dma_chan_rx; |
| struct scatterlist *sgl = &sport->rx_sgl; |
| struct tty_port *port = &sport->port.state->port; |
| struct dma_tx_state state; |
| enum dma_status status; |
| unsigned int count; |
| |
| /* unmap it first */ |
| dma_unmap_sg(sport->port.dev, sgl, 1, DMA_FROM_DEVICE); |
| |
| status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state); |
| count = RX_BUF_SIZE - state.residue; |
| |
| if (readl(sport->port.membase + USR2) & USR2_IDLE) { |
| /* In condition [3] the SDMA counted up too early */ |
| count--; |
| |
| writel(USR2_IDLE, sport->port.membase + USR2); |
| } |
| |
| dev_dbg(sport->port.dev, "We get %d bytes.\n", count); |
| |
| if (count) { |
| if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ)) |
| tty_insert_flip_string(port, sport->rx_buf, count); |
| tty_flip_buffer_push(port); |
| |
| start_rx_dma(sport); |
| } else if (readl(sport->port.membase + USR2) & USR2_RDR) { |
| /* |
| * start rx_dma directly once data in RXFIFO, more efficient |
| * than before: |
| * 1. call imx_rx_dma_done to stop dma if no data received |
| * 2. wait next RDR interrupt to start dma transfer. |
| */ |
| start_rx_dma(sport); |
| } else { |
| /* |
| * stop dma to prevent too many IDLE event trigged if no data |
| * in RXFIFO |
| */ |
| imx_rx_dma_done(sport); |
| } |
| } |
| |
| static int start_rx_dma(struct imx_port *sport) |
| { |
| struct scatterlist *sgl = &sport->rx_sgl; |
| struct dma_chan *chan = sport->dma_chan_rx; |
| struct device *dev = sport->port.dev; |
| struct dma_async_tx_descriptor *desc; |
| int ret; |
| |
| sg_init_one(sgl, sport->rx_buf, RX_BUF_SIZE); |
| ret = dma_map_sg(dev, sgl, 1, DMA_FROM_DEVICE); |
| if (ret == 0) { |
| dev_err(dev, "DMA mapping error for RX.\n"); |
| return -EINVAL; |
| } |
| desc = dmaengine_prep_slave_sg(chan, sgl, 1, DMA_DEV_TO_MEM, |
| DMA_PREP_INTERRUPT); |
| if (!desc) { |
| dma_unmap_sg(dev, sgl, 1, DMA_FROM_DEVICE); |
| dev_err(dev, "We cannot prepare for the RX slave dma!\n"); |
| return -EINVAL; |
| } |
| desc->callback = dma_rx_callback; |
| desc->callback_param = sport; |
| |
| dev_dbg(dev, "RX: prepare for the DMA.\n"); |
| dmaengine_submit(desc); |
| dma_async_issue_pending(chan); |
| return 0; |
| } |
| |
| static void imx_uart_dma_exit(struct imx_port *sport) |
| { |
| if (sport->dma_chan_rx) { |
| dma_release_channel(sport->dma_chan_rx); |
| sport->dma_chan_rx = NULL; |
| |
| kfree(sport->rx_buf); |
| sport->rx_buf = NULL; |
| } |
| |
| if (sport->dma_chan_tx) { |
| dma_release_channel(sport->dma_chan_tx); |
| sport->dma_chan_tx = NULL; |
| } |
| |
| sport->dma_is_inited = 0; |
| } |
| |
| static int imx_uart_dma_init(struct imx_port *sport) |
| { |
| struct dma_slave_config slave_config = {}; |
| struct device *dev = sport->port.dev; |
| int ret; |
| |
| /* Prepare for RX : */ |
| sport->dma_chan_rx = dma_request_slave_channel(dev, "rx"); |
| if (!sport->dma_chan_rx) { |
| dev_dbg(dev, "cannot get the DMA channel.\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| slave_config.direction = DMA_DEV_TO_MEM; |
| slave_config.src_addr = sport->port.mapbase + URXD0; |
| slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; |
| slave_config.src_maxburst = RXTL; |
| ret = dmaengine_slave_config(sport->dma_chan_rx, &slave_config); |
| if (ret) { |
| dev_err(dev, "error in RX dma configuration.\n"); |
| goto err; |
| } |
| |
| sport->rx_buf = kzalloc(PAGE_SIZE, GFP_KERNEL); |
| if (!sport->rx_buf) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| /* Prepare for TX : */ |
| sport->dma_chan_tx = dma_request_slave_channel(dev, "tx"); |
| if (!sport->dma_chan_tx) { |
| dev_err(dev, "cannot get the TX DMA channel!\n"); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| slave_config.direction = DMA_MEM_TO_DEV; |
| slave_config.dst_addr = sport->port.mapbase + URTX0; |
| slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; |
| slave_config.dst_maxburst = TXTL; |
| ret = dmaengine_slave_config(sport->dma_chan_tx, &slave_config); |
| if (ret) { |
| dev_err(dev, "error in TX dma configuration."); |
| goto err; |
| } |
| |
| sport->dma_is_inited = 1; |
| |
| return 0; |
| err: |
| imx_uart_dma_exit(sport); |
| return ret; |
| } |
| |
| static void imx_enable_dma(struct imx_port *sport) |
| { |
| unsigned long temp; |
| |
| init_waitqueue_head(&sport->dma_wait); |
| |
| /* set UCR1 */ |
| temp = readl(sport->port.membase + UCR1); |
| temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN | |
| /* wait for 32 idle frames for IDDMA interrupt */ |
| UCR1_ICD_REG(3); |
| writel(temp, sport->port.membase + UCR1); |
| |
| /* set UCR4 */ |
| temp = readl(sport->port.membase + UCR4); |
| temp |= UCR4_IDDMAEN; |
| writel(temp, sport->port.membase + UCR4); |
| |
| sport->dma_is_enabled = 1; |
| } |
| |
| static void imx_disable_dma(struct imx_port *sport) |
| { |
| unsigned long temp; |
| |
| /* clear UCR1 */ |
| temp = readl(sport->port.membase + UCR1); |
| temp &= ~(UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN); |
| writel(temp, sport->port.membase + UCR1); |
| |
| /* clear UCR2 */ |
| temp = readl(sport->port.membase + UCR2); |
| temp &= ~(UCR2_CTSC | UCR2_CTS); |
| writel(temp, sport->port.membase + UCR2); |
| |
| /* clear UCR4 */ |
| temp = readl(sport->port.membase + UCR4); |
| temp &= ~UCR4_IDDMAEN; |
| writel(temp, sport->port.membase + UCR4); |
| |
| sport->dma_is_enabled = 0; |
| } |
| |
| /* half the RX buffer size */ |
| #define CTSTL 16 |
| |
| static int imx_startup(struct uart_port *port) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| int retval, i; |
| unsigned long flags, temp; |
| |
| retval = clk_prepare_enable(sport->clk_per); |
| if (retval) |
| return retval; |
| retval = clk_prepare_enable(sport->clk_ipg); |
| if (retval) { |
| clk_disable_unprepare(sport->clk_per); |
| return retval; |
| } |
| |
| imx_setup_ufcr(sport, 0); |
| |
| /* disable the DREN bit (Data Ready interrupt enable) before |
| * requesting IRQs |
| */ |
| temp = readl(sport->port.membase + UCR4); |
| |
| /* set the trigger level for CTS */ |
| temp &= ~(UCR4_CTSTL_MASK << UCR4_CTSTL_SHF); |
| temp |= CTSTL << UCR4_CTSTL_SHF; |
| |
| writel(temp & ~UCR4_DREN, sport->port.membase + UCR4); |
| |
| spin_lock_irqsave(&sport->port.lock, flags); |
| /* Reset fifo's and state machines */ |
| i = 100; |
| |
| temp = readl(sport->port.membase + UCR2); |
| temp &= ~UCR2_SRST; |
| writel(temp, sport->port.membase + UCR2); |
| |
| while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0)) |
| udelay(1); |
| |
| /* |
| * Finally, clear and enable interrupts |
| */ |
| writel(USR1_RTSD, sport->port.membase + USR1); |
| writel(USR2_ORE, sport->port.membase + USR2); |
| |
| temp = readl(sport->port.membase + UCR1); |
| temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN; |
| |
| writel(temp, sport->port.membase + UCR1); |
| |
| temp = readl(sport->port.membase + UCR4); |
| temp |= UCR4_OREN; |
| writel(temp, sport->port.membase + UCR4); |
| |
| temp = readl(sport->port.membase + UCR2); |
| temp |= (UCR2_RXEN | UCR2_TXEN); |
| if (!sport->have_rtscts) |
| temp |= UCR2_IRTS; |
| writel(temp, sport->port.membase + UCR2); |
| |
| if (!is_imx1_uart(sport)) { |
| temp = readl(sport->port.membase + UCR3); |
| temp |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP; |
| writel(temp, sport->port.membase + UCR3); |
| } |
| |
| /* |
| * Enable modem status interrupts |
| */ |
| imx_enable_ms(&sport->port); |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| |
| return 0; |
| } |
| |
| static void imx_shutdown(struct uart_port *port) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| unsigned long temp; |
| unsigned long flags; |
| |
| if (sport->dma_is_enabled) { |
| int ret; |
| |
| /* We have to wait for the DMA to finish. */ |
| ret = wait_event_interruptible(sport->dma_wait, |
| !sport->dma_is_rxing && !sport->dma_is_txing); |
| if (ret != 0) { |
| sport->dma_is_rxing = 0; |
| sport->dma_is_txing = 0; |
| dmaengine_terminate_all(sport->dma_chan_tx); |
| dmaengine_terminate_all(sport->dma_chan_rx); |
| } |
| spin_lock_irqsave(&sport->port.lock, flags); |
| imx_stop_tx(port); |
| imx_stop_rx(port); |
| imx_disable_dma(sport); |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| imx_uart_dma_exit(sport); |
| } |
| |
| spin_lock_irqsave(&sport->port.lock, flags); |
| temp = readl(sport->port.membase + UCR2); |
| temp &= ~(UCR2_TXEN); |
| writel(temp, sport->port.membase + UCR2); |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| |
| /* |
| * Stop our timer. |
| */ |
| del_timer_sync(&sport->timer); |
| |
| /* |
| * Disable all interrupts, port and break condition. |
| */ |
| |
| spin_lock_irqsave(&sport->port.lock, flags); |
| temp = readl(sport->port.membase + UCR1); |
| temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN); |
| |
| writel(temp, sport->port.membase + UCR1); |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| |
| clk_disable_unprepare(sport->clk_per); |
| clk_disable_unprepare(sport->clk_ipg); |
| } |
| |
| static void imx_flush_buffer(struct uart_port *port) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| struct scatterlist *sgl = &sport->tx_sgl[0]; |
| unsigned long temp; |
| int i = 100, ubir, ubmr, uts; |
| |
| if (!sport->dma_chan_tx) |
| return; |
| |
| sport->tx_bytes = 0; |
| dmaengine_terminate_all(sport->dma_chan_tx); |
| if (sport->dma_is_txing) { |
| dma_unmap_sg(sport->port.dev, sgl, sport->dma_tx_nents, |
| DMA_TO_DEVICE); |
| temp = readl(sport->port.membase + UCR1); |
| temp &= ~UCR1_TDMAEN; |
| writel(temp, sport->port.membase + UCR1); |
| sport->dma_is_txing = false; |
| } |
| |
| /* |
| * According to the Reference Manual description of the UART SRST bit: |
| * "Reset the transmit and receive state machines, |
| * all FIFOs and register USR1, USR2, UBIR, UBMR, UBRC, URXD, UTXD |
| * and UTS[6-3]". As we don't need to restore the old values from |
| * USR1, USR2, URXD, UTXD, only save/restore the other four registers |
| */ |
| ubir = readl(sport->port.membase + UBIR); |
| ubmr = readl(sport->port.membase + UBMR); |
| uts = readl(sport->port.membase + IMX21_UTS); |
| |
| temp = readl(sport->port.membase + UCR2); |
| temp &= ~UCR2_SRST; |
| writel(temp, sport->port.membase + UCR2); |
| |
| while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0)) |
| udelay(1); |
| |
| /* Restore the registers */ |
| writel(ubir, sport->port.membase + UBIR); |
| writel(ubmr, sport->port.membase + UBMR); |
| writel(uts, sport->port.membase + IMX21_UTS); |
| } |
| |
| static void |
| imx_set_termios(struct uart_port *port, struct ktermios *termios, |
| struct ktermios *old) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| unsigned long flags; |
| unsigned int ucr2, old_ucr1, old_txrxen, baud, quot; |
| unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; |
| unsigned int div, ufcr; |
| unsigned long num, denom; |
| uint64_t tdiv64; |
| |
| /* |
| * We only support CS7 and CS8. |
| */ |
| while ((termios->c_cflag & CSIZE) != CS7 && |
| (termios->c_cflag & CSIZE) != CS8) { |
| termios->c_cflag &= ~CSIZE; |
| termios->c_cflag |= old_csize; |
| old_csize = CS8; |
| } |
| |
| if ((termios->c_cflag & CSIZE) == CS8) |
| ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS; |
| else |
| ucr2 = UCR2_SRST | UCR2_IRTS; |
| |
| if (termios->c_cflag & CRTSCTS) { |
| if (sport->have_rtscts) { |
| ucr2 &= ~UCR2_IRTS; |
| |
| if (port->rs485.flags & SER_RS485_ENABLED) { |
| /* |
| * RTS is mandatory for rs485 operation, so keep |
| * it under manual control and keep transmitter |
| * disabled. |
| */ |
| if (!(port->rs485.flags & |
| SER_RS485_RTS_AFTER_SEND)) |
| ucr2 |= UCR2_CTS; |
| } else { |
| ucr2 |= UCR2_CTSC; |
| } |
| |
| /* Can we enable the DMA support? */ |
| if (is_imx6q_uart(sport) && !uart_console(port) |
| && !sport->dma_is_inited) |
| imx_uart_dma_init(sport); |
| } else { |
| termios->c_cflag &= ~CRTSCTS; |
| } |
| } else if (port->rs485.flags & SER_RS485_ENABLED) |
| /* disable transmitter */ |
| if (!(port->rs485.flags & SER_RS485_RTS_AFTER_SEND)) |
| ucr2 |= UCR2_CTS; |
| |
| if (termios->c_cflag & CSTOPB) |
| ucr2 |= UCR2_STPB; |
| if (termios->c_cflag & PARENB) { |
| ucr2 |= UCR2_PREN; |
| if (termios->c_cflag & PARODD) |
| ucr2 |= UCR2_PROE; |
| } |
| |
| del_timer_sync(&sport->timer); |
| |
| /* |
| * Ask the core to calculate the divisor for us. |
| */ |
| baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); |
| quot = uart_get_divisor(port, baud); |
| |
| spin_lock_irqsave(&sport->port.lock, flags); |
| |
| sport->port.read_status_mask = 0; |
| if (termios->c_iflag & INPCK) |
| sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR); |
| if (termios->c_iflag & (BRKINT | PARMRK)) |
| sport->port.read_status_mask |= URXD_BRK; |
| |
| /* |
| * Characters to ignore |
| */ |
| sport->port.ignore_status_mask = 0; |
| if (termios->c_iflag & IGNPAR) |
| sport->port.ignore_status_mask |= URXD_PRERR | URXD_FRMERR; |
| if (termios->c_iflag & IGNBRK) { |
| sport->port.ignore_status_mask |= URXD_BRK; |
| /* |
| * If we're ignoring parity and break indicators, |
| * ignore overruns too (for real raw support). |
| */ |
| if (termios->c_iflag & IGNPAR) |
| sport->port.ignore_status_mask |= URXD_OVRRUN; |
| } |
| |
| if ((termios->c_cflag & CREAD) == 0) |
| sport->port.ignore_status_mask |= URXD_DUMMY_READ; |
| |
| /* |
| * Update the per-port timeout. |
| */ |
| uart_update_timeout(port, termios->c_cflag, baud); |
| |
| /* |
| * disable interrupts and drain transmitter |
| */ |
| old_ucr1 = readl(sport->port.membase + UCR1); |
| writel(old_ucr1 & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN), |
| sport->port.membase + UCR1); |
| |
| while (!(readl(sport->port.membase + USR2) & USR2_TXDC)) |
| barrier(); |
| |
| /* then, disable everything */ |
| old_txrxen = readl(sport->port.membase + UCR2); |
| writel(old_txrxen & ~(UCR2_TXEN | UCR2_RXEN), |
| sport->port.membase + UCR2); |
| old_txrxen &= (UCR2_TXEN | UCR2_RXEN); |
| |
| /* custom-baudrate handling */ |
| div = sport->port.uartclk / (baud * 16); |
| if (baud == 38400 && quot != div) |
| baud = sport->port.uartclk / (quot * 16); |
| |
| div = sport->port.uartclk / (baud * 16); |
| if (div > 7) |
| div = 7; |
| if (!div) |
| div = 1; |
| |
| rational_best_approximation(16 * div * baud, sport->port.uartclk, |
| 1 << 16, 1 << 16, &num, &denom); |
| |
| tdiv64 = sport->port.uartclk; |
| tdiv64 *= num; |
| do_div(tdiv64, denom * 16 * div); |
| tty_termios_encode_baud_rate(termios, |
| (speed_t)tdiv64, (speed_t)tdiv64); |
| |
| num -= 1; |
| denom -= 1; |
| |
| ufcr = readl(sport->port.membase + UFCR); |
| ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div); |
| if (sport->dte_mode) |
| ufcr |= UFCR_DCEDTE; |
| writel(ufcr, sport->port.membase + UFCR); |
| |
| writel(num, sport->port.membase + UBIR); |
| writel(denom, sport->port.membase + UBMR); |
| |
| if (!is_imx1_uart(sport)) |
| writel(sport->port.uartclk / div / 1000, |
| sport->port.membase + IMX21_ONEMS); |
| |
| writel(old_ucr1, sport->port.membase + UCR1); |
| |
| /* set the parity, stop bits and data size */ |
| writel(ucr2 | old_txrxen, sport->port.membase + UCR2); |
| |
| if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) |
| imx_enable_ms(&sport->port); |
| |
| if (sport->dma_is_inited && !sport->dma_is_enabled) |
| imx_enable_dma(sport); |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| } |
| |
| static const char *imx_type(struct uart_port *port) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| |
| return sport->port.type == PORT_IMX ? "IMX" : NULL; |
| } |
| |
| /* |
| * Configure/autoconfigure the port. |
| */ |
| static void imx_config_port(struct uart_port *port, int flags) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| |
| if (flags & UART_CONFIG_TYPE) |
| sport->port.type = PORT_IMX; |
| } |
| |
| /* |
| * Verify the new serial_struct (for TIOCSSERIAL). |
| * The only change we allow are to the flags and type, and |
| * even then only between PORT_IMX and PORT_UNKNOWN |
| */ |
| static int |
| imx_verify_port(struct uart_port *port, struct serial_struct *ser) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| int ret = 0; |
| |
| if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX) |
| ret = -EINVAL; |
| if (sport->port.irq != ser->irq) |
| ret = -EINVAL; |
| if (ser->io_type != UPIO_MEM) |
| ret = -EINVAL; |
| if (sport->port.uartclk / 16 != ser->baud_base) |
| ret = -EINVAL; |
| if (sport->port.mapbase != (unsigned long)ser->iomem_base) |
| ret = -EINVAL; |
| if (sport->port.iobase != ser->port) |
| ret = -EINVAL; |
| if (ser->hub6 != 0) |
| ret = -EINVAL; |
| return ret; |
| } |
| |
| #if defined(CONFIG_CONSOLE_POLL) |
| |
| static int imx_poll_init(struct uart_port *port) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| unsigned long flags; |
| unsigned long temp; |
| int retval; |
| |
| retval = clk_prepare_enable(sport->clk_ipg); |
| if (retval) |
| return retval; |
| retval = clk_prepare_enable(sport->clk_per); |
| if (retval) |
| clk_disable_unprepare(sport->clk_ipg); |
| |
| imx_setup_ufcr(sport, 0); |
| |
| spin_lock_irqsave(&sport->port.lock, flags); |
| |
| temp = readl(sport->port.membase + UCR1); |
| if (is_imx1_uart(sport)) |
| temp |= IMX1_UCR1_UARTCLKEN; |
| temp |= UCR1_UARTEN | UCR1_RRDYEN; |
| temp &= ~(UCR1_TXMPTYEN | UCR1_RTSDEN); |
| writel(temp, sport->port.membase + UCR1); |
| |
| temp = readl(sport->port.membase + UCR2); |
| temp |= UCR2_RXEN; |
| writel(temp, sport->port.membase + UCR2); |
| |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| |
| return 0; |
| } |
| |
| static int imx_poll_get_char(struct uart_port *port) |
| { |
| if (!(readl_relaxed(port->membase + USR2) & USR2_RDR)) |
| return NO_POLL_CHAR; |
| |
| return readl_relaxed(port->membase + URXD0) & URXD_RX_DATA; |
| } |
| |
| static void imx_poll_put_char(struct uart_port *port, unsigned char c) |
| { |
| unsigned int status; |
| |
| /* drain */ |
| do { |
| status = readl_relaxed(port->membase + USR1); |
| } while (~status & USR1_TRDY); |
| |
| /* write */ |
| writel_relaxed(c, port->membase + URTX0); |
| |
| /* flush */ |
| do { |
| status = readl_relaxed(port->membase + USR2); |
| } while (~status & USR2_TXDC); |
| } |
| #endif |
| |
| static int imx_rs485_config(struct uart_port *port, |
| struct serial_rs485 *rs485conf) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| |
| /* unimplemented */ |
| rs485conf->delay_rts_before_send = 0; |
| rs485conf->delay_rts_after_send = 0; |
| rs485conf->flags |= SER_RS485_RX_DURING_TX; |
| |
| /* RTS is required to control the transmitter */ |
| if (!sport->have_rtscts) |
| rs485conf->flags &= ~SER_RS485_ENABLED; |
| |
| if (rs485conf->flags & SER_RS485_ENABLED) { |
| unsigned long temp; |
| |
| /* disable transmitter */ |
| temp = readl(sport->port.membase + UCR2); |
| temp &= ~UCR2_CTSC; |
| if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND) |
| temp &= ~UCR2_CTS; |
| else |
| temp |= UCR2_CTS; |
| writel(temp, sport->port.membase + UCR2); |
| } |
| |
| port->rs485 = *rs485conf; |
| |
| return 0; |
| } |
| |
| static struct uart_ops imx_pops = { |
| .tx_empty = imx_tx_empty, |
| .set_mctrl = imx_set_mctrl, |
| .get_mctrl = imx_get_mctrl, |
| .stop_tx = imx_stop_tx, |
| .start_tx = imx_start_tx, |
| .stop_rx = imx_stop_rx, |
| .enable_ms = imx_enable_ms, |
| .break_ctl = imx_break_ctl, |
| .startup = imx_startup, |
| .shutdown = imx_shutdown, |
| .flush_buffer = imx_flush_buffer, |
| .set_termios = imx_set_termios, |
| .type = imx_type, |
| .config_port = imx_config_port, |
| .verify_port = imx_verify_port, |
| #if defined(CONFIG_CONSOLE_POLL) |
| .poll_init = imx_poll_init, |
| .poll_get_char = imx_poll_get_char, |
| .poll_put_char = imx_poll_put_char, |
| #endif |
| }; |
| |
| static struct imx_port *imx_ports[UART_NR]; |
| |
| #ifdef CONFIG_SERIAL_IMX_CONSOLE |
| static void imx_console_putchar(struct uart_port *port, int ch) |
| { |
| struct imx_port *sport = (struct imx_port *)port; |
| |
| while (readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL) |
| barrier(); |
| |
| writel(ch, sport->port.membase + URTX0); |
| } |
| |
| /* |
| * Interrupts are disabled on entering |
| */ |
| static void |
| imx_console_write(struct console *co, const char *s, unsigned int count) |
| { |
| struct imx_port *sport = imx_ports[co->index]; |
| struct imx_port_ucrs old_ucr; |
| unsigned int ucr1; |
| unsigned long flags = 0; |
| int locked = 1; |
| int retval; |
| |
| retval = clk_enable(sport->clk_per); |
| if (retval) |
| return; |
| retval = clk_enable(sport->clk_ipg); |
| if (retval) { |
| clk_disable(sport->clk_per); |
| return; |
| } |
| |
| if (sport->port.sysrq) |
| locked = 0; |
| else if (oops_in_progress) |
| locked = spin_trylock_irqsave(&sport->port.lock, flags); |
| else |
| spin_lock_irqsave(&sport->port.lock, flags); |
| |
| /* |
| * First, save UCR1/2/3 and then disable interrupts |
| */ |
| imx_port_ucrs_save(&sport->port, &old_ucr); |
| ucr1 = old_ucr.ucr1; |
| |
| if (is_imx1_uart(sport)) |
| ucr1 |= IMX1_UCR1_UARTCLKEN; |
| ucr1 |= UCR1_UARTEN; |
| ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN); |
| |
| writel(ucr1, sport->port.membase + UCR1); |
| |
| writel(old_ucr.ucr2 | UCR2_TXEN, sport->port.membase + UCR2); |
| |
| uart_console_write(&sport->port, s, count, imx_console_putchar); |
| |
| /* |
| * Finally, wait for transmitter to become empty |
| * and restore UCR1/2/3 |
| */ |
| while (!(readl(sport->port.membase + USR2) & USR2_TXDC)); |
| |
| imx_port_ucrs_restore(&sport->port, &old_ucr); |
| |
| if (locked) |
| spin_unlock_irqrestore(&sport->port.lock, flags); |
| |
| clk_disable(sport->clk_ipg); |
| clk_disable(sport->clk_per); |
| } |
| |
| /* |
| * If the port was already initialised (eg, by a boot loader), |
| * try to determine the current setup. |
| */ |
| static void __init |
| imx_console_get_options(struct imx_port *sport, int *baud, |
| int *parity, int *bits) |
| { |
| |
| if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) { |
| /* ok, the port was enabled */ |
| unsigned int ucr2, ubir, ubmr, uartclk; |
| unsigned int baud_raw; |
| unsigned int ucfr_rfdiv; |
| |
| ucr2 = readl(sport->port.membase + UCR2); |
| |
| *parity = 'n'; |
| if (ucr2 & UCR2_PREN) { |
| if (ucr2 & UCR2_PROE) |
| *parity = 'o'; |
| else |
| *parity = 'e'; |
| } |
| |
| if (ucr2 & UCR2_WS) |
| *bits = 8; |
| else |
| *bits = 7; |
| |
| ubir = readl(sport->port.membase + UBIR) & 0xffff; |
| ubmr = readl(sport->port.membase + UBMR) & 0xffff; |
| |
| ucfr_rfdiv = (readl(sport->port.membase + UFCR) & UFCR_RFDIV) >> 7; |
| if (ucfr_rfdiv == 6) |
| ucfr_rfdiv = 7; |
| else |
| ucfr_rfdiv = 6 - ucfr_rfdiv; |
| |
| uartclk = clk_get_rate(sport->clk_per); |
| uartclk /= ucfr_rfdiv; |
| |
| { /* |
| * The next code provides exact computation of |
| * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1)) |
| * without need of float support or long long division, |
| * which would be required to prevent 32bit arithmetic overflow |
| */ |
| unsigned int mul = ubir + 1; |
| unsigned int div = 16 * (ubmr + 1); |
| unsigned int rem = uartclk % div; |
| |
| baud_raw = (uartclk / div) * mul; |
| baud_raw += (rem * mul + div / 2) / div; |
| *baud = (baud_raw + 50) / 100 * 100; |
| } |
| |
| if (*baud != baud_raw) |
| pr_info("Console IMX rounded baud rate from %d to %d\n", |
| baud_raw, *baud); |
| } |
| } |
| |
| static int __init |
| imx_console_setup(struct console *co, char *options) |
| { |
| struct imx_port *sport; |
| int baud = 9600; |
| int bits = 8; |
| int parity = 'n'; |
| int flow = 'n'; |
| int retval; |
| |
| /* |
| * Check whether an invalid uart number has been specified, and |
| * if so, search for the first available port that does have |
| * console support. |
| */ |
| if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports)) |
| co->index = 0; |
| sport = imx_ports[co->index]; |
| if (sport == NULL) |
| return -ENODEV; |
| |
| /* For setting the registers, we only need to enable the ipg clock. */ |
| retval = clk_prepare_enable(sport->clk_ipg); |
| if (retval) |
| goto error_console; |
| |
| if (options) |
| uart_parse_options(options, &baud, &parity, &bits, &flow); |
| else |
| imx_console_get_options(sport, &baud, &parity, &bits); |
| |
| imx_setup_ufcr(sport, 0); |
| |
| retval = uart_set_options(&sport->port, co, baud, parity, bits, flow); |
| |
| clk_disable(sport->clk_ipg); |
| if (retval) { |
| clk_unprepare(sport->clk_ipg); |
| goto error_console; |
| } |
| |
| retval = clk_prepare(sport->clk_per); |
| if (retval) |
| clk_disable_unprepare(sport->clk_ipg); |
| |
| error_console: |
| return retval; |
| } |
| |
| static struct uart_driver imx_reg; |
| static struct console imx_console = { |
| .name = DEV_NAME, |
| .write = imx_console_write, |
| .device = uart_console_device, |
| .setup = imx_console_setup, |
| .flags = CON_PRINTBUFFER, |
| .index = -1, |
| .data = &imx_reg, |
| }; |
| |
| #define IMX_CONSOLE &imx_console |
| #else |
| #define IMX_CONSOLE NULL |
| #endif |
| |
| static struct uart_driver imx_reg = { |
| .owner = THIS_MODULE, |
| .driver_name = DRIVER_NAME, |
| .dev_name = DEV_NAME, |
| .major = SERIAL_IMX_MAJOR, |
| .minor = MINOR_START, |
| .nr = ARRAY_SIZE(imx_ports), |
| .cons = IMX_CONSOLE, |
| }; |
| |
| static int serial_imx_suspend(struct platform_device *dev, pm_message_t state) |
| { |
| struct imx_port *sport = platform_get_drvdata(dev); |
| unsigned int val; |
| |
| /* enable wakeup from i.MX UART */ |
| val = readl(sport->port.membase + UCR3); |
| val |= UCR3_AWAKEN; |
| writel(val, sport->port.membase + UCR3); |
| |
| uart_suspend_port(&imx_reg, &sport->port); |
| |
| return 0; |
| } |
| |
| static int serial_imx_resume(struct platform_device *dev) |
| { |
| struct imx_port *sport = platform_get_drvdata(dev); |
| unsigned int val; |
| |
| /* disable wakeup from i.MX UART */ |
| val = readl(sport->port.membase + UCR3); |
| val &= ~UCR3_AWAKEN; |
| writel(val, sport->port.membase + UCR3); |
| |
| uart_resume_port(&imx_reg, &sport->port); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF |
| /* |
| * This function returns 1 iff pdev isn't a device instatiated by dt, 0 iff it |
| * could successfully get all information from dt or a negative errno. |
| */ |
| static int serial_imx_probe_dt(struct imx_port *sport, |
| struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| const struct of_device_id *of_id = |
| of_match_device(imx_uart_dt_ids, &pdev->dev); |
| int ret; |
| |
| if (!np) |
| /* no device tree device */ |
| return 1; |
| |
| ret = of_alias_get_id(np, "serial"); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); |
| return ret; |
| } |
| sport->port.line = ret; |
| |
| if (of_get_property(np, "fsl,uart-has-rtscts", NULL)) |
| sport->have_rtscts = 1; |
| |
| if (of_get_property(np, "fsl,dte-mode", NULL)) |
| sport->dte_mode = 1; |
| |
| sport->devdata = of_id->data; |
| |
| return 0; |
| } |
| #else |
| static inline int serial_imx_probe_dt(struct imx_port *sport, |
| struct platform_device *pdev) |
| { |
| return 1; |
| } |
| #endif |
| |
| static void serial_imx_probe_pdata(struct imx_port *sport, |
| struct platform_device *pdev) |
| { |
| struct imxuart_platform_data *pdata = dev_get_platdata(&pdev->dev); |
| |
| sport->port.line = pdev->id; |
| sport->devdata = (struct imx_uart_data *) pdev->id_entry->driver_data; |
| |
| if (!pdata) |
| return; |
| |
| if (pdata->flags & IMXUART_HAVE_RTSCTS) |
| sport->have_rtscts = 1; |
| } |
| |
| static int serial_imx_probe(struct platform_device *pdev) |
| { |
| struct imx_port *sport; |
| void __iomem *base; |
| int ret = 0; |
| struct resource *res; |
| int txirq, rxirq, rtsirq; |
| |
| sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); |
| if (!sport) |
| return -ENOMEM; |
| |
| ret = serial_imx_probe_dt(sport, pdev); |
| if (ret > 0) |
| serial_imx_probe_pdata(sport, pdev); |
| else if (ret < 0) |
| return ret; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| rxirq = platform_get_irq(pdev, 0); |
| txirq = platform_get_irq(pdev, 1); |
| rtsirq = platform_get_irq(pdev, 2); |
| |
| sport->port.dev = &pdev->dev; |
| sport->port.mapbase = res->start; |
| sport->port.membase = base; |
| sport->port.type = PORT_IMX, |
| sport->port.iotype = UPIO_MEM; |
| sport->port.irq = rxirq; |
| sport->port.fifosize = 32; |
| sport->port.ops = &imx_pops; |
| sport->port.rs485_config = imx_rs485_config; |
| sport->port.rs485.flags = |
| SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX; |
| sport->port.flags = UPF_BOOT_AUTOCONF; |
| init_timer(&sport->timer); |
| sport->timer.function = imx_timeout; |
| sport->timer.data = (unsigned long)sport; |
| |
| sport->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); |
| if (IS_ERR(sport->clk_ipg)) { |
| ret = PTR_ERR(sport->clk_ipg); |
| dev_err(&pdev->dev, "failed to get ipg clk: %d\n", ret); |
| return ret; |
| } |
| |
| sport->clk_per = devm_clk_get(&pdev->dev, "per"); |
| if (IS_ERR(sport->clk_per)) { |
| ret = PTR_ERR(sport->clk_per); |
| dev_err(&pdev->dev, "failed to get per clk: %d\n", ret); |
| return ret; |
| } |
| |
| sport->port.uartclk = clk_get_rate(sport->clk_per); |
| |
| /* |
| * Allocate the IRQ(s) i.MX1 has three interrupts whereas later |
| * chips only have one interrupt. |
| */ |
| if (txirq > 0) { |
| ret = devm_request_irq(&pdev->dev, rxirq, imx_rxint, 0, |
| dev_name(&pdev->dev), sport); |
| if (ret) |
| return ret; |
| |
| ret = devm_request_irq(&pdev->dev, txirq, imx_txint, 0, |
| dev_name(&pdev->dev), sport); |
| if (ret) |
| return ret; |
| } else { |
| ret = devm_request_irq(&pdev->dev, rxirq, imx_int, 0, |
| dev_name(&pdev->dev), sport); |
| if (ret) |
| return ret; |
| } |
| |
| imx_ports[sport->port.line] = sport; |
| |
| platform_set_drvdata(pdev, sport); |
| |
| return uart_add_one_port(&imx_reg, &sport->port); |
| } |
| |
| static int serial_imx_remove(struct platform_device *pdev) |
| { |
| struct imx_port *sport = platform_get_drvdata(pdev); |
| |
| return uart_remove_one_port(&imx_reg, &sport->port); |
| } |
| |
| static struct platform_driver serial_imx_driver = { |
| .probe = serial_imx_probe, |
| .remove = serial_imx_remove, |
| |
| .suspend = serial_imx_suspend, |
| .resume = serial_imx_resume, |
| .id_table = imx_uart_devtype, |
| .driver = { |
| .name = "imx-uart", |
| .of_match_table = imx_uart_dt_ids, |
| }, |
| }; |
| |
| static int __init imx_serial_init(void) |
| { |
| int ret = uart_register_driver(&imx_reg); |
| |
| if (ret) |
| return ret; |
| |
| ret = platform_driver_register(&serial_imx_driver); |
| if (ret != 0) |
| uart_unregister_driver(&imx_reg); |
| |
| return ret; |
| } |
| |
| static void __exit imx_serial_exit(void) |
| { |
| platform_driver_unregister(&serial_imx_driver); |
| uart_unregister_driver(&imx_reg); |
| } |
| |
| module_init(imx_serial_init); |
| module_exit(imx_serial_exit); |
| |
| MODULE_AUTHOR("Sascha Hauer"); |
| MODULE_DESCRIPTION("IMX generic serial port driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:imx-uart"); |