diff --git a/drivers/net/irda/act200l-sir.c b/drivers/net/irda/act200l-sir.c
index a911645..e891751 100644
--- a/drivers/net/irda/act200l-sir.c
+++ b/drivers/net/irda/act200l-sir.c
@@ -107,8 +107,6 @@
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __func__ );
-
 	/* Power on the dongle */
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
 
@@ -124,8 +122,6 @@
 
 static int act200l_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__ );
-
 	/* Power off the dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
 
@@ -143,8 +139,6 @@
 	u8 control[3];
 	int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __func__ );
-
 	/* Clear DTR and set RTS to enter command mode */
 	sirdev_set_dtr_rts(dev, FALSE, TRUE);
 
@@ -212,8 +206,6 @@
 	};
 	int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __func__ );
-
 	switch (state) {
 	case SIRDEV_STATE_DONGLE_RESET:
 		/* Reset the dongle : set RTS low for 25 ms */
diff --git a/drivers/net/irda/actisys-sir.c b/drivers/net/irda/actisys-sir.c
index 50b2141..e224b8b 100644
--- a/drivers/net/irda/actisys-sir.c
+++ b/drivers/net/irda/actisys-sir.c
@@ -165,8 +165,7 @@
 	int ret = 0;
 	int i = 0;
 
-        IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __func__,
-        	speed, dev->speed);
+	pr_debug("%s(), speed=%d (was %d)\n", __func__, speed, dev->speed);
 
 	/* dongle was already resetted from irda_request state machine,
 	 * we are in known state (dongle default)
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 7f23e5f..588680a 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -154,8 +154,6 @@
 	int reg, revision;
 	int i = 0;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
-
 	ret = platform_driver_register(&ali_ircc_driver);
         if (ret) {
 		net_err_ratelimited("%s, Can't register driver!\n",
@@ -168,7 +166,7 @@
 	/* Probe for all the ALi chipsets we know about */
 	for (chip= chips; chip->name; chip++, i++) 
 	{
-		IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__, chip->name);
+		pr_debug("%s(), Probing for %s ...\n", __func__, chip->name);
 				
 		/* Try all config registers for this chip */
 		for (cfg=0; cfg<2; cfg++)
@@ -198,12 +196,13 @@
 				
 			if (reg == chip->cid_value)
 			{
-				IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __func__, cfg_base);
+				pr_debug("%s(), Chip found at 0x%03x\n",
+					 __func__, cfg_base);
 					   
 				outb(0x1F, cfg_base);
 				revision = inb(cfg_base+1);
-				IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __func__,
-					   chip->name, revision);					
+				pr_debug("%s(), Found %s chip, revision=%d\n",
+					 __func__, chip->name, revision);
 				
 				/* 
 				 * If the user supplies the base address, then
@@ -225,15 +224,14 @@
 			}
 			else
 			{
-				IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __func__, chip->name, cfg_base);
+				pr_debug("%s(), No %s chip at 0x%03x\n",
+					 __func__, chip->name, cfg_base);
 			}
 			/* Exit configuration */
 			outb(0xbb, cfg_base);
 		}
 	}		
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
-
 	if (ret)
 		platform_driver_unregister(&ali_ircc_driver);
 
@@ -250,8 +248,6 @@
 {
 	int i;
 
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
-
 	for (i=0; i < ARRAY_SIZE(dev_self); i++) {
 		if (dev_self[i])
 			ali_ircc_close(dev_self[i]);
@@ -259,7 +255,6 @@
 	
 	platform_driver_unregister(&ali_ircc_driver);
 
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 }
 
 static const struct net_device_ops ali_ircc_sir_ops = {
@@ -289,8 +284,6 @@
 	int dongle_id;
 	int err;
 			
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
-
 	if (i >= ARRAY_SIZE(dev_self)) {
 		net_err_ratelimited("%s(), maximum number of supported chips reached!\n",
 				    __func__);
@@ -394,7 +387,6 @@
 		
 	self->io.dongle_id = dongle_id;
 
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 	
 	return 0;
 
@@ -423,8 +415,6 @@
 {
 	int iobase;
 
-	IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__);
-
 	IRDA_ASSERT(self != NULL, return -1;);
 
         iobase = self->io.fir_base;
@@ -433,7 +423,7 @@
 	unregister_netdev(self->netdev);
 
 	/* Release the PORT that this driver is using */
-	IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __func__, self->io.fir_base);
+	pr_debug("%s(), Releasing Region %03x\n", __func__, self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 
 	if (self->tx_buff.head)
@@ -447,7 +437,6 @@
 	dev_self[self->index] = NULL;
 	free_netdev(self->netdev);
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 	
 	return 0;
 }
@@ -490,7 +479,6 @@
 	int cfg_base = info->cfg_base;
 	int hi, low, reg;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 	
 	/* Enter Configuration */
 	outb(chip->entr1, cfg_base);
@@ -509,13 +497,13 @@
 	
 	info->sir_base = info->fir_base;
 	
-	IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__, info->fir_base);
+	pr_debug("%s(), probing fir_base=0x%03x\n", __func__, info->fir_base);
 		
 	/* Read IRQ control register */
 	outb(0x70, cfg_base);
 	reg = inb(cfg_base+1);
 	info->irq = reg & 0x0f;
-	IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
+	pr_debug("%s(), probing irq=%d\n", __func__, info->irq);
 	
 	/* Read DMA channel */
 	outb(0x74, cfg_base);
@@ -526,24 +514,23 @@
 		net_warn_ratelimited("%s(), No DMA channel assigned !\n",
 				     __func__);
 	else
-		IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
+		pr_debug("%s(), probing dma=%d\n", __func__, info->dma);
 	
 	/* Read Enabled Status */
 	outb(0x30, cfg_base);
 	reg = inb(cfg_base+1);
 	info->enabled = (reg & 0x80) && (reg & 0x01);
-	IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __func__, info->enabled);
+	pr_debug("%s(), probing enabled=%d\n", __func__, info->enabled);
 	
 	/* Read Power Status */
 	outb(0x22, cfg_base);
 	reg = inb(cfg_base+1);
 	info->suspended = (reg & 0x20);
-	IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __func__, info->suspended);
+	pr_debug("%s(), probing suspended=%d\n", __func__, info->suspended);
 	
 	/* Exit configuration */
 	outb(0xbb, cfg_base);
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__);
 	
 	return 0;	
 }
@@ -561,7 +548,6 @@
 	int version;
 	int iobase = info->fir_base;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 	
 	/* Locking comments :
 	 * Most operations here need to be protected. We are called before
@@ -622,7 +608,6 @@
 	// outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM
 	// Turn on the interrupts in ali_ircc_net_open
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 	
 	return 0;
 }
@@ -639,7 +624,6 @@
 	int dongle_id, reg;
 	int cfg_base = info->cfg_base;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 		
 	/* Enter Configuration */
 	outb(chips[i].entr1, cfg_base);
@@ -653,13 +637,12 @@
 	outb(0xf0, cfg_base);
 	reg = inb(cfg_base+1);	
 	dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01);
-	IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __func__,
-		dongle_id, dongle_types[dongle_id]);
+	pr_debug("%s(), probing dongle_id=%d, dongle_types=%s\n",
+		 __func__, dongle_id, dongle_types[dongle_id]);
 	
 	/* Exit configuration */
 	outb(0xbb, cfg_base);
 			
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 	
 	return dongle_id;
 }
@@ -676,7 +659,6 @@
 	struct ali_ircc_cb *self;
 	int ret;
 		
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 		
 	self = netdev_priv(dev);
 	
@@ -690,7 +672,6 @@
 		
 	spin_unlock(&self->lock);
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
 	return ret;
 }
 /*
@@ -704,7 +685,6 @@
 	__u8 eir, OldMessageCount;
 	int iobase, tmp;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__);
 	
 	iobase = self->io.fir_base;
 	
@@ -717,10 +697,10 @@
 	//self->ier = inb(iobase+FIR_IER); 		2000/12/1 04:32PM
 	eir = self->InterruptID & self->ier; /* Mask out the interesting ones */ 
 	
-	IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __func__,self->InterruptID);
-	IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __func__,self->LineStatus);
-	IRDA_DEBUG(1, "%s(), self->ier = %x\n", __func__,self->ier);
-	IRDA_DEBUG(1, "%s(), eir = %x\n", __func__,eir);
+	pr_debug("%s(), self->InterruptID = %x\n", __func__, self->InterruptID);
+	pr_debug("%s(), self->LineStatus = %x\n", __func__, self->LineStatus);
+	pr_debug("%s(), self->ier = %x\n", __func__, self->ier);
+	pr_debug("%s(), eir = %x\n", __func__, eir);
 	
 	/* Disable interrupts */
 	 SetCOMInterrupts(self, FALSE);
@@ -731,7 +711,8 @@
 	{		
 		if (self->io.direction == IO_XMIT) /* TX */
 		{
-			IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __func__);
+			pr_debug("%s(), ******* IIR_EOM (Tx) *******\n",
+				 __func__);
 			
 			if(ali_ircc_dma_xmit_complete(self))
 			{
@@ -750,23 +731,27 @@
 		}	
 		else /* RX */
 		{
-			IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __func__);
+			pr_debug("%s(), ******* IIR_EOM (Rx) *******\n",
+				 __func__);
 			
 			if(OldMessageCount > ((self->LineStatus+1) & 0x07))
 			{
 				self->rcvFramesOverflow = TRUE;	
-				IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ********\n", __func__);
+				pr_debug("%s(), ******* self->rcvFramesOverflow = TRUE ********\n",
+					 __func__);
 			}
 						
 			if (ali_ircc_dma_receive_complete(self))
 			{
-				IRDA_DEBUG(1, "%s(), ******* receive complete ********\n", __func__);
+				pr_debug("%s(), ******* receive complete ********\n",
+					 __func__);
 				
 				self->ier = IER_EOM;				
 			}
 			else
 			{
-				IRDA_DEBUG(1, "%s(), ******* Not receive complete ********\n", __func__);
+				pr_debug("%s(), ******* Not receive complete ********\n",
+					 __func__);
 				
 				self->ier = IER_EOM | IER_TIMER;								
 			}	
@@ -779,7 +764,8 @@
 		if(OldMessageCount > ((self->LineStatus+1) & 0x07))
 		{
 			self->rcvFramesOverflow = TRUE;	
-			IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE *******\n", __func__);
+			pr_debug("%s(), ******* self->rcvFramesOverflow = TRUE *******\n",
+				 __func__);
 		}
 		/* Disable Timer */
 		switch_bank(iobase, BANK1);
@@ -811,7 +797,6 @@
 	/* Restore Interrupt */	
 	SetCOMInterrupts(self, TRUE);	
 		
-	IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __func__);
 	return IRQ_RETVAL(eir);
 }
 
@@ -826,7 +811,6 @@
 	int iobase;
 	int iir, lsr;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 	
 	iobase = self->io.sir_base;
 
@@ -835,13 +819,13 @@
 		/* Clear interrupt */
 		lsr = inb(iobase+UART_LSR);
 
-		IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __func__,
-			   iir, lsr, iobase);
+		pr_debug("%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
+			 __func__, iir, lsr, iobase);
 
 		switch (iir) 
 		{
 			case UART_IIR_RLSI:
-				IRDA_DEBUG(2, "%s(), RLSI\n", __func__);
+				pr_debug("%s(), RLSI\n", __func__);
 				break;
 			case UART_IIR_RDI:
 				/* Receive interrupt */
@@ -855,15 +839,14 @@
 				}				
 				break;
 			default:
-				IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __func__, iir);
+				pr_debug("%s(), unhandled IIR=%#x\n",
+					 __func__, iir);
 				break;
 		} 
 		
 	}
 	
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__);
-
 	return IRQ_RETVAL(iir);
 }
 
@@ -879,7 +862,6 @@
 	int boguscount = 0;
 	int iobase;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__);
 	IRDA_ASSERT(self != NULL, return;);
 
 	iobase = self->io.sir_base;
@@ -894,12 +876,11 @@
 
 		/* Make sure we don't stay here too long */
 		if (boguscount++ > 32) {
-			IRDA_DEBUG(2,"%s(), breaking!\n", __func__);
+			pr_debug("%s(), breaking!\n", __func__);
 			break;
 		}
 	} while (inb(iobase+UART_LSR) & UART_LSR_DR);	
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 /*
@@ -916,7 +897,6 @@
 
 	IRDA_ASSERT(self != NULL, return;);
 
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	iobase = self->io.sir_base;
 
@@ -935,16 +915,18 @@
 		{
 			/* We must wait until all data are gone */
 			while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT))
-				IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __func__ );
+				pr_debug("%s(), UART_LSR_THRE\n", __func__);
 			
-			IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __func__ , self->new_speed);
+			pr_debug("%s(), Changing speed! self->new_speed = %d\n",
+				 __func__, self->new_speed);
 			ali_ircc_change_speed(self, self->new_speed);
 			self->new_speed = 0;			
 			
 			// benjamin 2000/11/10 06:32PM
 			if (self->io.speed > 115200)
 			{
-				IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT\n", __func__ );
+				pr_debug("%s(), ali_ircc_change_speed from UART_LSR_TEMT\n",
+					 __func__);
 					
 				self->ier = IER_EOM;
 				// SetCOMInterrupts(self, TRUE);							
@@ -962,7 +944,6 @@
 		outb(UART_IER_RDI, iobase+UART_IER);
 	}
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud)
@@ -970,9 +951,8 @@
 	struct net_device *dev = self->netdev;
 	int iobase;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
-	IRDA_DEBUG(2, "%s(), setting speed = %d\n", __func__ , baud);
+	pr_debug("%s(), setting speed = %d\n", __func__, baud);
 	
 	/* This function *must* be called with irq off and spin-lock.
 	 * - Jean II */
@@ -1011,7 +991,6 @@
 		
 	netif_wake_queue(self->netdev);	
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud)
@@ -1021,14 +1000,14 @@
 	struct ali_ircc_cb *self = priv;
 	struct net_device *dev;
 
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 		
 	IRDA_ASSERT(self != NULL, return;);
 
 	dev = self->netdev;
 	iobase = self->io.fir_base;
 	
-	IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __func__ ,self->io.speed,baud);
+	pr_debug("%s(), self->io.speed = %d, change to speed = %d\n",
+		 __func__, self->io.speed, baud);
 	
 	/* Come from SIR speed */
 	if(self->io.speed <=115200)
@@ -1042,7 +1021,6 @@
 	// Set Dongle Speed mode
 	ali_ircc_change_dongle_speed(self, baud);
 		
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 /*
@@ -1060,9 +1038,8 @@
 	int lcr;    /* Line control reg */
 	int divisor;
 
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
-	IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __func__ , speed);
+	pr_debug("%s(), Setting speed to: %d\n", __func__, speed);
 
 	IRDA_ASSERT(self != NULL, return;);
 
@@ -1116,7 +1093,6 @@
 	
 	spin_unlock_irqrestore(&self->lock, flags);
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed)
@@ -1126,14 +1102,14 @@
 	int iobase,dongle_id;
 	int tmp = 0;
 			
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	iobase = self->io.fir_base; 	/* or iobase = self->io.sir_base; */
 	dongle_id = self->io.dongle_id;
 	
 	/* We are already locked, no need to do it again */
 		
-	IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __func__ , dongle_types[dongle_id], speed);
+	pr_debug("%s(), Set Speed for %s , Speed = %d\n",
+		 __func__, dongle_types[dongle_id], speed);
 	
 	switch_bank(iobase, BANK2);
 	tmp = inb(iobase+FIR_IRDA_CR);
@@ -1297,7 +1273,6 @@
 			
 	switch_bank(iobase, BANK0);
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 /*
@@ -1310,11 +1285,10 @@
 {
 	int actual = 0;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 		
 	/* Tx FIFO should be empty! */
 	if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) {
-		IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __func__ );
+		pr_debug("%s(), failed, fifo not empty!\n", __func__);
 		return 0;
 	}
         
@@ -1326,7 +1300,6 @@
 		actual++;
 	}
 	
-        IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	return actual;
 }
 
@@ -1342,7 +1315,6 @@
 	int iobase;
 	char hwname[32];
 		
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 	
@@ -1386,7 +1358,6 @@
 	 */
 	self->irlap = irlap_open(dev, &self->qos, hwname);
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return 0;
 }
@@ -1403,7 +1374,6 @@
 	struct ali_ircc_cb *self;
 	//int iobase;
 			
-	IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__ );
 		
 	IRDA_ASSERT(dev != NULL, return -1;);
 
@@ -1426,7 +1396,6 @@
 	free_irq(self->io.irq, dev);
 	free_dma(self->io.dma);
 
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return 0;
 }
@@ -1446,7 +1415,6 @@
 	__u32 speed;
 	int mtt, diff;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	self = netdev_priv(dev);
 	iobase = self->io.fir_base;
@@ -1500,7 +1468,8 @@
 			diff = self->now.tv_usec - self->stamp.tv_usec;
 			/* self->stamp is set from ali_ircc_dma_receive_complete() */
 							
-			IRDA_DEBUG(1, "%s(), ******* diff = %d *******\n", __func__ , diff);
+			pr_debug("%s(), ******* diff = %d *******\n",
+				 __func__, diff);
 			
 			if (diff < 0) 
 				diff += 1000000;
@@ -1522,7 +1491,8 @@
 					/* Adjust for timer resolution */
 					mtt = (mtt+250) / 500; 	/* 4 discard, 5 get advanced, Let's round off */
 					
-					IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __func__ , mtt);
+					pr_debug("%s(), ************** mtt = %d ***********\n",
+						 __func__, mtt);
 					
 					/* Setup timer */
 					if (mtt == 1) /* 500 us */
@@ -1579,7 +1549,6 @@
 	spin_unlock_irqrestore(&self->lock, flags);
 	dev_kfree_skb(skb);
 
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 	return NETDEV_TX_OK;	
 }
 
@@ -1590,7 +1559,6 @@
 	unsigned char FIFO_OPTI, Hi, Lo;
 	
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	iobase = self->io.fir_base;
 	
@@ -1641,7 +1609,8 @@
 	tmp = inb(iobase+FIR_LCR_B);
 	tmp &= ~0x20; // Disable SIP
 	outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B);
-	IRDA_DEBUG(1, "%s(), *** Change to TX mode: FIR_LCR_B = 0x%x ***\n", __func__ , inb(iobase+FIR_LCR_B));
+	pr_debug("%s(), *** Change to TX mode: FIR_LCR_B = 0x%x ***\n",
+		 __func__, inb(iobase + FIR_LCR_B));
 	
 	outb(0, iobase+FIR_LSR);
 			
@@ -1651,7 +1620,6 @@
 	
 	switch_bank(iobase, BANK0); 
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static int  ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self)
@@ -1659,7 +1627,6 @@
 	int iobase;
 	int ret = TRUE;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	iobase = self->io.fir_base;
 	
@@ -1716,7 +1683,6 @@
 		
 	switch_bank(iobase, BANK0); 
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 	return ret;
 }
 
@@ -1731,7 +1697,6 @@
 {
 	int iobase, tmp;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	iobase = self->io.fir_base;
 	
@@ -1769,7 +1734,8 @@
 	//switch_bank(iobase, BANK0);
 	tmp = inb(iobase+FIR_LCR_B);
 	outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM
-	IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x ***\n", __func__ , inb(iobase+FIR_LCR_B));
+	pr_debug("%s(), *** Change To RX mode: FIR_LCR_B = 0x%x ***\n",
+		 __func__, inb(iobase + FIR_LCR_B));
 			
 	/* Set Rx Threshold */
 	switch_bank(iobase, BANK1);
@@ -1781,7 +1747,6 @@
 	outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR);
 				
 	switch_bank(iobase, BANK0); 
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 	return 0;
 }
 
@@ -1792,8 +1757,6 @@
 	__u8 status, MessageCount;
 	int len, i, iobase, val;	
 
-	IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ );
-
 	st_fifo = &self->st_fifo;		
 	iobase = self->io.fir_base;	
 		
@@ -1801,7 +1764,7 @@
 	MessageCount = inb(iobase+ FIR_LSR)&0x07;
 	
 	if (MessageCount > 0)	
-		IRDA_DEBUG(0, "%s(), Message count = %d,\n", __func__ , MessageCount);
+		pr_debug("%s(), Message count = %d\n", __func__, MessageCount);
 		
 	for (i=0; i<=MessageCount; i++)
 	{
@@ -1814,11 +1777,11 @@
 		len = len << 8; 
 		len |= inb(iobase+FIR_RX_DSR_LO);
 		
-		IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __func__ , len);
-		IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __func__ , status);
+		pr_debug("%s(), RX Length = 0x%.2x,\n", __func__ , len);
+		pr_debug("%s(), RX Status = 0x%.2x,\n", __func__ , status);
 		
 		if (st_fifo->tail >= MAX_RX_WINDOW) {
-			IRDA_DEBUG(0, "%s(), window is full!\n", __func__ );
+			pr_debug("%s(), window is full!\n", __func__);
 			continue;
 		}
 			
@@ -1841,7 +1804,8 @@
 		/* Check for errors */
 		if ((status & 0xd8) || self->rcvFramesOverflow || (len==0)) 		
 		{
-			IRDA_DEBUG(0,"%s(), ************* RX Errors ************\n", __func__ );
+			pr_debug("%s(), ************* RX Errors ************\n",
+				 __func__);
 			
 			/* Skip frame */
 			self->netdev->stats.rx_errors++;
@@ -1851,29 +1815,34 @@
 			if (status & LSR_FIFO_UR) 
 			{
 				self->netdev->stats.rx_frame_errors++;
-				IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************\n", __func__ );
+				pr_debug("%s(), ************* FIFO Errors ************\n",
+					 __func__);
 			}	
 			if (status & LSR_FRAME_ERROR)
 			{
 				self->netdev->stats.rx_frame_errors++;
-				IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************\n", __func__ );
+				pr_debug("%s(), ************* FRAME Errors ************\n",
+					 __func__);
 			}
 							
 			if (status & LSR_CRC_ERROR) 
 			{
 				self->netdev->stats.rx_crc_errors++;
-				IRDA_DEBUG(0,"%s(), ************* CRC Errors ************\n", __func__ );
+				pr_debug("%s(), ************* CRC Errors ************\n",
+					 __func__);
 			}
 			
 			if(self->rcvFramesOverflow)
 			{
 				self->netdev->stats.rx_frame_errors++;
-				IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************\n", __func__ );
+				pr_debug("%s(), ************* Overran DMA buffer ************\n",
+					 __func__);
 			}
 			if(len == 0)
 			{
 				self->netdev->stats.rx_frame_errors++;
-				IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 *********\n", __func__ );
+				pr_debug("%s(), ********** Receive Frame Size = 0 *********\n",
+					 __func__);
 			}
 		}	 
 		else 
@@ -1885,7 +1854,8 @@
 				val = inb(iobase+FIR_BSR);	
 				if ((val& BSR_FIFO_NOT_EMPTY)== 0x80) 
 				{
-					IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************\n", __func__ );
+					pr_debug("%s(), ************* BSR_FIFO_NOT_EMPTY ************\n",
+						 __func__);
 					
 					/* Put this entry back in fifo */
 					st_fifo->head--;
@@ -1946,7 +1916,6 @@
 	
 	switch_bank(iobase, BANK0);	
 		
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 	return TRUE;
 }
 
@@ -1966,7 +1935,6 @@
 	int iobase;
 	__u32 speed;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;);
 	
@@ -2015,7 +1983,6 @@
 
 	dev_kfree_skb(skb);
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return NETDEV_TX_OK;	
 }
@@ -2034,7 +2001,6 @@
 	unsigned long flags;
 	int ret = 0;
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 
@@ -2042,11 +2008,11 @@
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
+	pr_debug("%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
 	
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
-		IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __func__ );
+		pr_debug("%s(), SIOCSBANDWIDTH\n", __func__);
 		/*
 		 * This function will also be used by IrLAP to change the
 		 * speed, so we still must allow for speed change within
@@ -2060,13 +2026,13 @@
 		spin_unlock_irqrestore(&self->lock, flags);
 		break;
 	case SIOCSMEDIABUSY: /* Set media busy */
-		IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __func__ );
+		pr_debug("%s(), SIOCSMEDIABUSY\n", __func__);
 		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 		irda_device_set_media_busy(self->netdev, TRUE);
 		break;
 	case SIOCGRECEIVING: /* Check if we are receiving right now */
-		IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __func__ );
+		pr_debug("%s(), SIOCGRECEIVING\n", __func__);
 		/* This is protected */
 		irq->ifr_receiving = ali_ircc_is_receiving(self);
 		break;
@@ -2074,7 +2040,6 @@
 		ret = -EOPNOTSUPP;
 	}
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return ret;
 }
@@ -2091,7 +2056,6 @@
 	int status = FALSE;
 	int iobase;		
 	
-	IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __func__ );
 	
 	IRDA_ASSERT(self != NULL, return FALSE;);
 
@@ -2105,7 +2069,8 @@
 		if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0) 		
 		{
 			/* We are receiving something */
-			IRDA_DEBUG(1, "%s(), We are receiving something\n", __func__ );
+			pr_debug("%s(), We are receiving something\n",
+				 __func__);
 			status = TRUE;
 		}
 		switch_bank(iobase, BANK0);		
@@ -2117,7 +2082,6 @@
 	
 	spin_unlock_irqrestore(&self->lock, flags);
 	
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 	
 	return status;
 }
@@ -2163,7 +2127,8 @@
 	
 	int iobase = self->io.fir_base; /* or sir_base */
 
-	IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __func__ , enable);
+	pr_debug("%s(), -------- Start -------- ( Enable = %d )\n",
+		 __func__, enable);
 	
 	/* Enable the interrupt which we wish to */
 	if (enable){
@@ -2204,14 +2169,12 @@
 	else
 		outb(newMask, iobase+UART_IER);
 		
-	IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void SIR2FIR(int iobase)
 {
 	//unsigned char tmp;
 		
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	/* Already protected (change_speed() or setup()), no need to lock.
 	 * Jean II */
@@ -2227,14 +2190,12 @@
 	//tmp |= 0x20;
 	//outb(tmp, iobase+FIR_LCR_B);	
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 static void FIR2SIR(int iobase)
 {
 	unsigned char val;
 	
-	IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ );
 	
 	/* Already protected (change_speed() or setup()), no need to lock.
 	 * Jean II */
@@ -2250,7 +2211,6 @@
 	val = inb(iobase+UART_LSR);
 	val = inb(iobase+UART_MSR);
 	
-	IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ );
 }
 
 MODULE_AUTHOR("Benjamin Kong <benjamin_kong@ali.com.tw>");
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index a87a82c..b337e6d 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -232,7 +232,7 @@
 for (i=0;i<len;i+=16) {
     for (j=0;j<16 && i+j<len;j++) { sprintf(&dump[3*j],"%02x.",data[i+j]); }
     dump [3*j]=0;
-    IRDA_DEBUG (2, "%c%s\n",head , dump);
+    pr_debug("%c%s\n", head, dump);
     head='+';
     }
 }
@@ -245,8 +245,6 @@
 {
   __u32 ringbase;
 
-  IRDA_DEBUG (4, "%s()\n", __func__);
-
   ringbase = INB (OBOE_RING_BASE0) << 10;
   ringbase |= INB (OBOE_RING_BASE1) << 18;
   ringbase |= INB (OBOE_RING_BASE2) << 26;
@@ -293,8 +291,6 @@
 toshoboe_disablebm (struct toshoboe_cb *self)
 {
   __u8 command;
-  IRDA_DEBUG (4, "%s()\n", __func__);
-
   pci_read_config_byte (self->pdev, PCI_COMMAND, &command);
   command &= ~PCI_COMMAND_MASTER;
   pci_write_config_byte (self->pdev, PCI_COMMAND, command);
@@ -305,8 +301,6 @@
 static void
 toshoboe_stopchip (struct toshoboe_cb *self)
 {
-  IRDA_DEBUG (4, "%s()\n", __func__);
-
   /*Disable interrupts */
   OUTB (0x0, OBOE_IER);
   /*Disable DMA, Disable Rx, Disable Tx */
@@ -350,7 +344,7 @@
   __u16 pconfig = 0;
   __u8 config0l = 0;
 
-  IRDA_DEBUG (2, "%s(%d/%d)\n", __func__, self->speed, self->io.speed);
+  pr_debug("%s(%d/%d)\n", __func__, self->speed, self->io.speed);
 
   switch (self->speed)
     {
@@ -482,7 +476,6 @@
 static void
 toshoboe_enablebm (struct toshoboe_cb *self)
 {
-  IRDA_DEBUG (4, "%s()\n", __func__);
   pci_set_master (self->pdev);
 }
 
@@ -492,8 +485,6 @@
 {
   int i;
 
-  IRDA_DEBUG (4, "%s()\n", __func__);
-
   for (i = 0; i < TX_SLOTS; ++i)
     {
       self->ring->tx[i].len = 0;
@@ -550,8 +541,6 @@
 {
   __u32 physaddr;
 
-  IRDA_DEBUG (4, "%s()\n", __func__);
-
   toshoboe_initring (self);
   toshoboe_enablebm (self);
   OUTBP (OBOE_CONFIG1_RESET, OBOE_CONFIG1);
@@ -636,9 +625,8 @@
   xbofs=xbofs/80000; /*Eight bits per byte, and mtt is in us*/
   xbofs++;
 
-  IRDA_DEBUG (2, DRIVER_NAME
-      ": generated mtt of %d bytes for %d us at %d baud\n"
-	  , xbofs,mtt,self->speed);
+  pr_debug(DRIVER_NAME ": generated mtt of %d bytes for %d us at %d baud\n",
+	   xbofs, mtt, self->speed);
 
   if (xbofs > TX_LEN)
     {
@@ -824,8 +812,6 @@
 #endif
   unsigned long flags;
 
-  IRDA_DEBUG (4, "%s()\n", __func__);
-
   if (request_irq (self->io.irq, toshoboe_probeinterrupt,
                    self->io.irqflags, "toshoboe", (void *) self))
     {
@@ -983,10 +969,10 @@
 
   IRDA_ASSERT (self != NULL, return NETDEV_TX_OK; );
 
-  IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __func__
-      ,skb->len,self->txpending,INB (OBOE_ENABLEH));
+  pr_debug("%s.tx:%x(%x)%x\n",
+	   __func__, skb->len, self->txpending, INB(OBOE_ENABLEH));
   if (!cb->magic) {
-      IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __func__, cb->magic);
+	  pr_debug("%s.Not IrLAP:%x\n", __func__, cb->magic);
 #ifdef DUMP_PACKETS
       _dumpbufs(skb->data,skb->len,'>');
 #endif
@@ -1012,8 +998,8 @@
       if (self->txpending || skb->len)
         {
           self->new_speed = speed;
-          IRDA_DEBUG (1, "%s: Queued TxDone scheduled speed change %d\n" ,
-		      __func__, speed);
+	  pr_debug("%s: Queued TxDone scheduled speed change %d\n" ,
+		   __func__, speed);
           /* if no data, that's all! */
           if (!skb->len)
             {
@@ -1055,8 +1041,7 @@
       /* which we will add a wrong checksum to */
 
       mtt = toshoboe_makemttpacket (self, self->tx_bufs[self->txs], mtt);
-      IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __func__
-          ,skb->len,mtt,self->txpending);
+      pr_debug("%s.mtt:%x(%x)%d\n", __func__, skb->len, mtt, self->txpending);
       if (mtt)
         {
           self->ring->tx[self->txs].len = mtt & 0xfff;
@@ -1099,8 +1084,9 @@
 
   if (self->ring->tx[self->txs].control & OBOE_CTL_TX_HW_OWNS)
     {
-      IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __func__
-          ,skb->len, self->ring->tx[self->txs].control, self->txpending);
+	    pr_debug("%s.ful:%x(%x)%x\n",
+		     __func__, skb->len, self->ring->tx[self->txs].control,
+		     self->txpending);
       toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
       spin_unlock_irqrestore(&self->spinlock, flags);
       return NETDEV_TX_BUSY;
@@ -1177,8 +1163,7 @@
           if (self->ring->tx[i].control & OBOE_CTL_TX_HW_OWNS)
               self->txpending++;
         }
-      IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __func__
-          ,irqstat,txp,self->txpending);
+      pr_debug("%s.txd(%x)%x/%x\n", __func__, irqstat, txp, self->txpending);
 
       txp = INB (OBOE_TXSLOT) & OBOE_SLOT_MASK;
 
@@ -1206,8 +1191,8 @@
       if ((!self->txpending) && (self->new_speed))
         {
           self->speed = self->new_speed;
-          IRDA_DEBUG (1, "%s: Executed TxDone scheduled speed change %d\n",
-		      __func__, self->speed);
+	  pr_debug("%s: Executed TxDone scheduled speed change %d\n",
+		   __func__, self->speed);
           toshoboe_setbaud (self);
         }
 
@@ -1222,8 +1207,8 @@
         {
           int len = self->ring->rx[self->rxs].len;
           skb = NULL;
-          IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __func__
-		      ,len,self->ring->rx[self->rxs].control);
+	  pr_debug("%s.rcv:%x(%x)\n", __func__
+		   , len, self->ring->rx[self->rxs].control);
 
 #ifdef DUMP_PACKETS
 dumpbufs(self->rx_bufs[self->rxs],len,'<');
@@ -1244,7 +1229,7 @@
                       len -= 2;
                   else
                       len = 0;
-                  IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __func__, len,enable);
+                  pr_debug("%s.SIR:%x(%x)\n", __func__, len, enable);
                 }
 
 #ifdef USE_MIR
@@ -1254,7 +1239,7 @@
                       len -= 2;
                   else
                       len = 0;
-                  IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __func__, len,enable);
+                  pr_debug("%s.MIR:%x(%x)\n", __func__, len, enable);
                 }
 #endif
               else if (enable & OBOE_ENABLEH_FIRON)
@@ -1263,10 +1248,10 @@
                       len -= 4;   /*FIXME: check this */
                   else
                       len = 0;
-                  IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __func__, len,enable);
+                  pr_debug("%s.FIR:%x(%x)\n", __func__, len, enable);
                 }
               else
-                  IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __func__, len,enable);
+		      pr_debug("%s.?IR:%x(%x)\n", __func__, len, enable);
 
               if (len)
                 {
@@ -1299,8 +1284,8 @@
             /* (SIR) data is splitted in several slots. */
             /* we have to join all the received buffers received */
             /*in a large buffer before checking CRC. */
-            IRDA_DEBUG (0, "%s.err:%x(%x)\n", __func__
-                ,len,self->ring->rx[self->rxs].control);
+		    pr_debug("%s.err:%x(%x)\n", __func__
+			     , len, self->ring->rx[self->rxs].control);
             }
 
           self->ring->rx[self->rxs].len = 0x0;
@@ -1327,8 +1312,8 @@
   if (irqstat & OBOE_INT_SIP)
     {
       self->int_sip++;
-      IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __func__
-	      ,self->int_sip,irqstat,self->txpending);
+      pr_debug("%s.sip:%x(%x)%x\n",
+	       __func__, self->int_sip, irqstat, self->txpending);
     }
   return IRQ_HANDLED;
 }
@@ -1341,8 +1326,6 @@
   unsigned long flags;
   int rc;
 
-  IRDA_DEBUG (4, "%s()\n", __func__);
-
   self = netdev_priv(dev);
 
   if (self->async)
@@ -1379,8 +1362,6 @@
 {
   struct toshoboe_cb *self;
 
-  IRDA_DEBUG (4, "%s()\n", __func__);
-
   IRDA_ASSERT (dev != NULL, return -1; );
   self = netdev_priv(dev);
 
@@ -1424,7 +1405,7 @@
 
   IRDA_ASSERT (self != NULL, return -1; );
 
-  IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
+  pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 
   /* Disable interrupts & save flags */
   spin_lock_irqsave(&self->spinlock, flags);
@@ -1436,8 +1417,8 @@
        * speed, so we still must allow for speed change within
        * interrupt context.
        */
-      IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __func__
-          ,dev->name, INB (OBOE_STATUS), irq->ifr_baudrate );
+	    pr_debug("%s(BANDWIDTH), %s, (%X/%ld\n",
+		     __func__, dev->name, INB(OBOE_STATUS), irq->ifr_baudrate);
       if (!in_interrupt () && !capable (CAP_NET_ADMIN)) {
 	ret = -EPERM;
 	goto out;
@@ -1449,8 +1430,9 @@
       self->new_speed = irq->ifr_baudrate;
       break;
     case SIOCSMEDIABUSY:       /* Set media busy */
-      IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __func__
-          ,dev->name, INB (OBOE_STATUS), capable (CAP_NET_ADMIN) );
+	    pr_debug("%s(MEDIABUSY), %s, (%X/%x)\n",
+		     __func__, dev->name,
+		     INB(OBOE_STATUS), capable(CAP_NET_ADMIN));
       if (!capable (CAP_NET_ADMIN)) {
 	ret = -EPERM;
 	goto out;
@@ -1459,11 +1441,11 @@
       break;
     case SIOCGRECEIVING:       /* Check if we are receiving right now */
       irq->ifr_receiving = (INB (OBOE_STATUS) & OBOE_STATUS_RXBUSY) ? 1 : 0;
-      IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __func__
-          ,dev->name, INB (OBOE_STATUS), irq->ifr_receiving );
+	    pr_debug("%s(RECEIVING), %s, (%X/%x)\n",
+		     __func__, dev->name, INB(OBOE_STATUS), irq->ifr_receiving);
       break;
     default:
-      IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
+	    pr_debug("%s(?), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
       ret = -EOPNOTSUPP;
     }
 out:
@@ -1490,8 +1472,6 @@
   int i;
   struct toshoboe_cb *self = pci_get_drvdata(pci_dev);
 
-  IRDA_DEBUG (4, "%s()\n", __func__);
-
   IRDA_ASSERT (self != NULL, return; );
 
   if (!self->stopped)
@@ -1538,8 +1518,6 @@
   int ok = 0;
   int err;
 
-  IRDA_DEBUG (4, "%s()\n", __func__);
-
   if ((err=pci_enable_device(pci_dev)))
     return err;
 
@@ -1700,8 +1678,6 @@
   unsigned long flags;
   int i = 10;
 
-  IRDA_DEBUG (4, "%s()\n", __func__);
-
   if (!self || self->stopped)
     return 0;
 
@@ -1728,8 +1704,6 @@
   struct toshoboe_cb *self = pci_get_drvdata(pci_dev);
   unsigned long flags;
 
-  IRDA_DEBUG (4, "%s()\n", __func__);
-
   if (!self || !self->stopped)
     return 0;
 
diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c
index f0512ad..7e0a5b8 100644
--- a/drivers/net/irda/girbil-sir.c
+++ b/drivers/net/irda/girbil-sir.c
@@ -86,8 +86,6 @@
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Power on dongle */
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
 
@@ -102,8 +100,6 @@
 
 static int girbil_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
 
@@ -126,8 +122,6 @@
 	u8 control[2];
 	static int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* dongle alread reset - port and dongle at default speed */
 
 	switch(state) {
@@ -210,8 +204,6 @@
 	u8 control = GIRBIL_TXEN | GIRBIL_RXEN;
 	int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	switch (state) {
 	case SIRDEV_STATE_DONGLE_RESET:
 		/* Reset dongle */
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index e9aedbe..48b2f9a 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -176,12 +176,13 @@
 		    (!force) && (self->speed != -1)) {
 			/* No speed and xbofs change here
 			 * (we'll do it later in the write callback) */
-			IRDA_DEBUG(2, "%s(), not changing speed yet\n", __func__);
+			pr_debug("%s(), not changing speed yet\n", __func__);
 			*header = 0;
 			return;
 		}
 
-		IRDA_DEBUG(2, "%s(), changing speed to %d\n", __func__, self->new_speed);
+		pr_debug("%s(), changing speed to %d\n",
+			 __func__, self->new_speed);
 		self->speed = self->new_speed;
 		/* We will do ` self->new_speed = -1; ' in the completion
 		 * handler just in case the current URB fail - Jean II */
@@ -227,7 +228,8 @@
 	
 	/* Set the negotiated additional XBOFS */
 	if (self->new_xbofs != -1) {
-		IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __func__, self->new_xbofs);
+		pr_debug("%s(), changing xbofs to %d\n",
+			 __func__, self->new_xbofs);
 		self->xbofs = self->new_xbofs;
 		/* We will do ` self->new_xbofs = -1; ' in the completion
 		 * handler just in case the current URB fail - Jean II */
@@ -301,8 +303,8 @@
 	struct urb *urb;
 	int ret;
 
-	IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __func__,
-		   self->new_speed, self->new_xbofs);
+	pr_debug("%s(), speed=%d, xbofs=%d\n", __func__,
+		 self->new_speed, self->new_xbofs);
 
 	/* Grab the speed URB */
 	urb = self->speed_urb;
@@ -346,8 +348,6 @@
 {
 	struct irda_usb_cb *self = urb->context;
 	
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* We should always have a context */
 	IRDA_ASSERT(self != NULL, return;);
 	/* We should always be called for the speed URB */
@@ -356,7 +356,8 @@
 	/* Check for timeout and other USB nasties */
 	if (urb->status != 0) {
 		/* I get a lot of -ECONNABORTED = -103 here - Jean II */
-		IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags);
+		pr_debug("%s(), URB complete status %d, transfer_flags 0x%04X\n",
+			 __func__, urb->status, urb->transfer_flags);
 
 		/* Don't do anything here, that might confuse the USB layer.
 		 * Instead, we will wait for irda_usb_net_timeout(), the
@@ -391,7 +392,7 @@
 	s16 xbofs;
 	int res, mtt;
 
-	IRDA_DEBUG(4, "%s() on %s\n", __func__, netdev->name);
+	pr_debug("%s() on %s\n", __func__, netdev->name);
 
 	netif_stop_queue(netdev);
 
@@ -402,7 +403,7 @@
 	 * We need to check self->present under the spinlock because
 	 * of irda_usb_disconnect() is synchronous - Jean II */
 	if (!self->present) {
-		IRDA_DEBUG(0, "%s(), Device is gone...\n", __func__);
+		pr_debug("%s(), Device is gone...\n", __func__);
 		goto drop;
 	}
 
@@ -554,8 +555,6 @@
 	struct sk_buff *skb = urb->context;
 	struct irda_usb_cb *self = ((struct irda_skb_cb *) skb->cb)->context;
 	
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* We should always have a context */
 	IRDA_ASSERT(self != NULL, return;);
 	/* We should always be called for the speed URB */
@@ -568,7 +567,8 @@
 	/* Check for timeout and other USB nasties */
 	if (urb->status != 0) {
 		/* I get a lot of -ECONNABORTED = -103 here - Jean II */
-		IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags);
+		pr_debug("%s(), URB complete status %d, transfer_flags 0x%04X\n",
+			 __func__, urb->status, urb->transfer_flags);
 
 		/* Don't do anything here, that might confuse the USB layer,
 		 * and we could go in recursion and blow the kernel stack...
@@ -587,7 +587,7 @@
 
 	/* If the network is closed, stop everything */
 	if ((!self->netopen) || (!self->present)) {
-		IRDA_DEBUG(0, "%s(), Network is gone...\n", __func__);
+		pr_debug("%s(), Network is gone...\n", __func__);
 		spin_unlock_irqrestore(&self->lock, flags);
 		return;
 	}
@@ -598,7 +598,7 @@
 		    (self->new_xbofs != self->xbofs)) {
 			/* We haven't changed speed yet (because of
 			 * IUC_SPEED_BUG), so do it now - Jean II */
-			IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__);
+			pr_debug("%s(), Changing speed now...\n", __func__);
 			irda_usb_change_speed_xbofs(self);
 		} else {
 			/* New speed and xbof is now committed in hardware */
@@ -630,7 +630,7 @@
 	struct urb *urb;
 	int	done = 0;	/* If we have made any progress */
 
-	IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __func__);
+	pr_debug("%s(), Network layer thinks we timed out!\n", __func__);
 	IRDA_ASSERT(self != NULL, return;);
 
 	/* Protect us from USB callbacks, net Tx and else. */
@@ -647,7 +647,8 @@
 	/* Check speed URB */
 	urb = self->speed_urb;
 	if (urb->status != 0) {
-		IRDA_DEBUG(0, "%s: Speed change timed out, urb->status=%d, urb->transfer_flags=0x%04X\n", netdev->name, urb->status, urb->transfer_flags);
+		pr_debug("%s: Speed change timed out, urb->status=%d, urb->transfer_flags=0x%04X\n",
+			 netdev->name, urb->status, urb->transfer_flags);
 
 		switch (urb->status) {
 		case -EINPROGRESS:
@@ -672,7 +673,8 @@
 	if (urb->status != 0) {
 		struct sk_buff *skb = urb->context;
 
-		IRDA_DEBUG(0, "%s: Tx timed out, urb->status=%d, urb->transfer_flags=0x%04X\n", netdev->name, urb->status, urb->transfer_flags);
+		pr_debug("%s: Tx timed out, urb->status=%d, urb->transfer_flags=0x%04X\n",
+			 netdev->name, urb->status, urb->transfer_flags);
 
 		/* Increase error count */
 		netdev->stats.tx_errors++;
@@ -761,8 +763,6 @@
 	struct irda_skb_cb *cb;
 	int ret;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* This should never happen */
 	IRDA_ASSERT(skb != NULL, return;);
 	IRDA_ASSERT(urb != NULL, return;);
@@ -805,7 +805,7 @@
 	struct urb *next_urb;
 	unsigned int len, docopy;
 
-	IRDA_DEBUG(2, "%s(), len=%d\n", __func__, urb->actual_length);
+	pr_debug("%s(), len=%d\n", __func__, urb->actual_length);
 	
 	/* Find ourselves */
 	cb = (struct irda_skb_cb *) skb->cb;
@@ -815,7 +815,7 @@
 
 	/* If the network is closed or the device gone, stop everything */
 	if ((!self->netopen) || (!self->present)) {
-		IRDA_DEBUG(0, "%s(), Network is gone!\n", __func__);
+		pr_debug("%s(), Network is gone!\n", __func__);
 		/* Don't re-submit the URB : will stall the Rx path */
 		return;
 	}
@@ -838,7 +838,8 @@
 			/* Usually precursor to a hot-unplug on OHCI. */
 		default:
 			self->netdev->stats.rx_errors++;
-			IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags);
+			pr_debug("%s(), RX status %d, transfer_flags 0x%04X\n",
+				 __func__, urb->status, urb->transfer_flags);
 			break;
 		}
 		/* If we received an error, we don't want to resubmit the
@@ -964,8 +965,6 @@
 	struct irda_skb_cb *cb;
 	struct urb *next_urb;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Find ourselves */
 	cb = (struct irda_skb_cb *) skb->cb;
 	IRDA_ASSERT(cb != NULL, return;);
@@ -1049,8 +1048,8 @@
 						   self->bulk_out_ep),
 				   patch_block, block_size,
 				   &actual_len, msecs_to_jiffies(500));
-		IRDA_DEBUG(3,"%s(): Bulk send %u bytes, ret=%d\n",
-			   __func__, actual_len, ret);
+		pr_debug("%s(): Bulk send %u bytes, ret=%d\n",
+			 __func__, actual_len, ret);
 
 		if (ret < 0)
 			break;
@@ -1112,8 +1111,8 @@
 				+ ((build / 10) << 4)
 				+ (build % 10);
 
-			IRDA_DEBUG(3, "%s(): Firmware Product version %ld\n",
-                                   __func__, fw_version);
+			pr_debug("%s(): Firmware Product version %ld\n",
+				 __func__, fw_version);
                 }
         }
 
@@ -1169,8 +1168,6 @@
 	char	hwname[16];
 	int i;
 	
-	IRDA_DEBUG(1, "%s()\n", __func__);
-
 	IRDA_ASSERT(netdev != NULL, return -1;);
 	self = netdev_priv(netdev);
 	IRDA_ASSERT(self != NULL, return -1;);
@@ -1249,8 +1246,6 @@
 	struct irda_usb_cb *self;
 	int	i;
 
-	IRDA_DEBUG(1, "%s()\n", __func__);
-
 	IRDA_ASSERT(netdev != NULL, return -1;);
 	self = netdev_priv(netdev);
 	IRDA_ASSERT(self != NULL, return -1;);
@@ -1304,7 +1299,7 @@
 	self = netdev_priv(dev);
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
+	pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -1354,7 +1349,6 @@
 {
 	struct irda_class_desc *desc;
 
-	IRDA_DEBUG(3, "%s()\n", __func__);
 	
 	desc = self->irda_desc;
 	
@@ -1370,8 +1364,10 @@
 	self->qos.window_size.bits     = desc->bmWindowSize;
 	self->qos.data_size.bits       = desc->bmDataSize;
 
-	IRDA_DEBUG(0, "%s(), dongle says speed=0x%X, size=0x%X, window=0x%X, bofs=0x%X, turn=0x%X\n", 
-		__func__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits);
+	pr_debug("%s(), dongle says speed=0x%X, size=0x%X, window=0x%X, bofs=0x%X, turn=0x%X\n",
+		 __func__, self->qos.baud_rate.bits, self->qos.data_size.bits,
+		 self->qos.window_size.bits, self->qos.additional_bofs.bits,
+		 self->qos.min_turn_time.bits);
 
 	/* Don't always trust what the dongle tell us */
 	if(self->capability & IUC_SIR_ONLY)
@@ -1414,8 +1410,6 @@
 {
 	struct net_device *netdev = self->netdev;
 
-	IRDA_DEBUG(1, "%s()\n", __func__);
-
 	netdev->netdev_ops = &irda_usb_netdev_ops;
 
 	irda_usb_init_qos(self);
@@ -1430,8 +1424,6 @@
  */
 static inline void irda_usb_close(struct irda_usb_cb *self)
 {
-	IRDA_DEBUG(1, "%s()\n", __func__);
-
 	/* Remove netdevice */
 	unregister_netdev(self->netdev);
 
@@ -1509,8 +1501,9 @@
 		}
 	}
 
-	IRDA_DEBUG(0, "%s(), And our endpoints are : in=%02X, out=%02X (%d), int=%02X\n",
-		__func__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep);
+	pr_debug("%s(), And our endpoints are : in=%02X, out=%02X (%d), int=%02X\n",
+		 __func__, self->bulk_in_ep, self->bulk_out_ep,
+		 self->bulk_out_mtu, self->bulk_int_ep);
 
 	return (self->bulk_in_ep != 0) && (self->bulk_out_ep != 0);
 }
@@ -1572,7 +1565,7 @@
 		0, intf->altsetting->desc.bInterfaceNumber, desc,
 		sizeof(*desc), 500);
 	
-	IRDA_DEBUG(1, "%s(), ret=%d\n", __func__, ret);
+	pr_debug("%s(), ret=%d\n", __func__, ret);
 	if (ret < sizeof(*desc)) {
 		net_warn_ratelimited("usb-irda: class_descriptor read %s (%d)\n",
 				     ret < 0 ? "failed" : "too short", ret);
@@ -1679,7 +1672,8 @@
 	 * specify an alternate, but very few driver do like this.
 	 * Jean II */
 	ret = usb_set_interface(dev, intf->altsetting->desc.bInterfaceNumber, 0);
-	IRDA_DEBUG(1, "usb-irda: set interface %d result %d\n", intf->altsetting->desc.bInterfaceNumber, ret);
+	pr_debug("usb-irda: set interface %d result %d\n",
+		 intf->altsetting->desc.bInterfaceNumber, ret);
 	switch (ret) {
 		case 0:
 			break;
@@ -1687,10 +1681,11 @@
 			/* Martin Diehl says if we get a -EPIPE we should
 			 * be fine and we don't need to do a usb_clear_halt().
 			 * - Jean II */
-			IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __func__);
+			pr_debug("%s(), Received -EPIPE, ignoring...\n",
+				 __func__);
 			break;
 		default:
-			IRDA_DEBUG(0, "%s(), Unknown error %d\n", __func__, ret);
+			pr_debug("%s(), Unknown error %d\n", __func__, ret);
 			ret = -EIO;
 			goto err_out_3;
 	}
@@ -1716,7 +1711,7 @@
 		ret = usb_control_msg (self->usbdev, usb_sndctrlpipe (self->usbdev, 0),
 				       0x02, 0x40, 0, 0, NULL, 0, 500);
 		if (ret < 0) {
-			IRDA_DEBUG (0, "usb_control_msg failed %d\n", ret);
+			pr_debug("usb_control_msg failed %d\n", ret);
 			goto err_out_3;
 		} else {
 			mdelay(10);
@@ -1808,8 +1803,6 @@
 	struct irda_usb_cb *self = usb_get_intfdata(intf);
 	int i;
 
-	IRDA_DEBUG(1, "%s()\n", __func__);
-
 	usb_set_intfdata(intf, NULL);
 	if (!self)
 		return;
@@ -1858,7 +1851,7 @@
 
 	/* Free self and network device */
 	free_netdev(self->netdev);
-	IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __func__);
+	pr_debug("%s(), USB IrDA Disconnected\n", __func__);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index abbb654..696852e 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -240,7 +240,7 @@
 		 *  Characters received with a parity error, etc?
 		 */
  		if (fp && *fp++) { 
-			IRDA_DEBUG(0, "Framing or parity error!\n");
+			pr_debug("Framing or parity error!\n");
 			sirdev_receive(dev, NULL, 0);	/* notify sir_dev (updating stats) */
 			return;
  		}
@@ -387,7 +387,7 @@
 	IRDA_ASSERT(priv != NULL, return -ENODEV;);
 	IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -EBADR;);
 
-	IRDA_DEBUG(3, "%s(cmd=0x%X)\n", __func__, cmd);
+	pr_debug("%s(cmd=0x%X)\n", __func__, cmd);
 
 	dev = priv->dev;
 	IRDA_ASSERT(dev != NULL, return -1;);
@@ -477,7 +477,7 @@
 
 	mutex_unlock(&irtty_mutex);
 
-	IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __func__, tty->name);
+	pr_debug("%s - %s: irda line discipline opened\n", __func__, tty->name);
 
 	return 0;
 
@@ -528,7 +528,7 @@
 
 	kfree(priv);
 
-	IRDA_DEBUG(0, "%s - %s: irda line discipline closed\n", __func__, tty->name);
+	pr_debug("%s - %s: irda line discipline closed\n", __func__, tty->name);
 }
 
 /* ------------------------------------------------------- */
diff --git a/drivers/net/irda/litelink-sir.c b/drivers/net/irda/litelink-sir.c
index 6827777..8eefcb4 100644
--- a/drivers/net/irda/litelink-sir.c
+++ b/drivers/net/irda/litelink-sir.c
@@ -76,8 +76,6 @@
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Power up dongle */
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
 
@@ -93,8 +91,6 @@
 
 static int litelink_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
 
@@ -111,8 +107,6 @@
 {
         int i;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* dongle already reset by irda-thread - current speed (dongle and
 	 * port) is the default speed (115200 for litelink!)
 	 */
@@ -154,8 +148,6 @@
  */
 static int litelink_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* probably the power-up can be dropped here, but with only
 	 * 15 usec delay it's not worth the risk unless somebody with
 	 * the hardware confirms it doesn't break anything...
diff --git a/drivers/net/irda/ma600-sir.c b/drivers/net/irda/ma600-sir.c
index 944d044..a764817 100644
--- a/drivers/net/irda/ma600-sir.c
+++ b/drivers/net/irda/ma600-sir.c
@@ -65,13 +65,11 @@
 
 static int __init ma600_sir_init(void)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
 	return irda_register_dongle(&ma600);
 }
 
 static void __exit ma600_sir_cleanup(void)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
 	irda_unregister_dongle(&ma600);
 }
 
@@ -86,8 +84,6 @@
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
 
 	/* Explicitly set the speeds we can accept */
@@ -104,8 +100,6 @@
 
 static int ma600_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
 
@@ -174,8 +168,8 @@
 {
 	u8	byte;
 	
-	IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __func__,
-		speed, dev->speed);
+	pr_debug("%s(), speed=%d (was %d)\n", __func__,
+		 speed, dev->speed);
 
 	/* dongle already reset, dongle and port at default speed (9600) */
 
@@ -204,7 +198,7 @@
 		return -1;
 	}
 	else
-		IRDA_DEBUG(2, "%s() control byte write read OK\n", __func__);
+		pr_debug("%s() control byte write read OK\n", __func__);
 #endif
 
 	/* Set DTR, Set RTS */
@@ -236,8 +230,6 @@
 
 static int ma600_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Reset the dongle : set DTR low for 10 ms */
 	sirdev_set_dtr_rts(dev, FALSE, TRUE);
 	msleep(10);
diff --git a/drivers/net/irda/mcp2120-sir.c b/drivers/net/irda/mcp2120-sir.c
index 9767469..2e33f91 100644
--- a/drivers/net/irda/mcp2120-sir.c
+++ b/drivers/net/irda/mcp2120-sir.c
@@ -63,8 +63,6 @@
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* seems no explicit power-on required here and reset switching it on anyway */
 
 	qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
@@ -76,8 +74,6 @@
 
 static int mcp2120_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Power off dongle */
         /* reset and inhibit mcp2120 */
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
@@ -102,8 +98,6 @@
 	u8 control[2];
 	static int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	switch (state) {
 	case SIRDEV_STATE_DONGLE_SPEED:
 		/* Set DTR to enter command mode */
@@ -188,8 +182,6 @@
 	unsigned delay = 0;
 	int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	switch (state) {
 	case SIRDEV_STATE_DONGLE_RESET:
                 //printk("mcp2120_reset: dongle_reset\n");
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index 6cbd29d..e4d678f 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -894,7 +894,7 @@
 	if (!ndev)
 		goto error1;
 
-	IRDA_DEBUG(1, "MCS7780 USB-IrDA bridge found at %d.\n", udev->devnum);
+	pr_debug("MCS7780 USB-IrDA bridge found at %d.\n", udev->devnum);
 
 	SET_NETDEV_DEV(ndev, &intf->dev);
 
@@ -942,8 +942,8 @@
 	if (ret != 0)
 		goto error2;
 
-	IRDA_DEBUG(1, "IrDA: Registered MosChip MCS7780 device as %s\n",
-		   ndev->name);
+	pr_debug("IrDA: Registered MosChip MCS7780 device as %s\n",
+		 ndev->name);
 
 	mcs->transceiver_type = transceiver_type;
 	mcs->sir_tweak = sir_tweak;
@@ -973,7 +973,7 @@
 	free_netdev(mcs->netdev);
 
 	usb_set_intfdata(intf, NULL);
-	IRDA_DEBUG(0, "MCS7780 now disconnected.\n");
+	pr_debug("MCS7780 now disconnected.\n");
 }
 
 module_usb_driver(mcs_driver);
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index c0a1790..e7317b1 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -226,8 +226,8 @@
 
 	/* Probe for all the NSC chipsets we know about */
 	for (chip = chips; chip->name ; chip++) {
-		IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__,
-			   chip->name);
+		pr_debug("%s(), Probing for %s ...\n", __func__,
+			 chip->name);
 		
 		/* Try all config registers for this chip */
 		for (cfg = 0; cfg < ARRAY_SIZE(chip->cfg); cfg++) {
@@ -238,7 +238,8 @@
 			/* Read index register */
 			reg = inb(cfg_base);
 			if (reg == 0xff) {
-				IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __func__, cfg_base);
+				pr_debug("%s() no chip at 0x%03x\n",
+					 __func__, cfg_base);
 				continue;
 			}
 			
@@ -246,8 +247,9 @@
 			outb(chip->cid_index, cfg_base);
 			id = inb(cfg_base+1);
 			if ((id & chip->cid_mask) == chip->cid_value) {
-				IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n",
-					   __func__, chip->name, id & ~chip->cid_mask);
+				pr_debug("%s() Found %s chip, revision=%d\n",
+					 __func__, chip->name,
+					 id & ~chip->cid_mask);
 
 				/*
 				 * If we found a correct PnP setting,
@@ -277,7 +279,8 @@
 				 * the chip.
 				 */
 				if (ret) {
-					IRDA_DEBUG(2, "%s, PnP init failed\n", driver_name);
+					pr_debug("%s, PnP init failed\n",
+						 driver_name);
 					memset(&info, 0, sizeof(chipio_t));
 					info.cfg_base = cfg_base;
 					info.fir_base = io[i];
@@ -299,7 +302,8 @@
 				}
 				i++;
 			} else {
-				IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __func__, id);
+				pr_debug("%s(), Wrong chip id=0x%02x\n",
+					 __func__, id);
 			}
 		} 
 	}
@@ -363,9 +367,6 @@
 	void *ret;
 	int err, chip_index;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
-
  	for (chip_index = 0; chip_index < ARRAY_SIZE(dev_self); chip_index++) {
 		if (!dev_self[chip_index])
 			break;
@@ -520,8 +521,6 @@
 {
 	int iobase;
 
-	IRDA_DEBUG(4, "%s()\n", __func__);
-
 	IRDA_ASSERT(self != NULL, return -1;);
 
         iobase = self->io.fir_base;
@@ -532,8 +531,8 @@
 	unregister_netdev(self->netdev);
 
 	/* Release the PORT that this driver is using */
-	IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", 
-		   __func__, self->io.fir_base);
+	pr_debug("%s(), Releasing Region %03x\n",
+		 __func__, self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 
 	if (self->tx_buff.head)
@@ -630,8 +629,8 @@
 		break;
 	}
 	info->sir_base = info->fir_base;
-	IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__,
-		   info->fir_base);
+	pr_debug("%s(), probing fir_base=0x%03x\n", __func__,
+		 info->fir_base);
 
 	/* Read control signals routing register (CSRT) */
 	outb(CFG_108_CSRT, cfg_base);
@@ -663,7 +662,7 @@
 		info->irq = 15;
 		break;
 	}
-	IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq);
+	pr_debug("%s(), probing irq=%d\n", __func__, info->irq);
 
 	/* Currently we only read Rx DMA but it will also be used for Tx */
 	switch ((reg >> 3) & 0x03) {
@@ -680,7 +679,7 @@
 		info->dma = 3;
 		break;
 	}
-	IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma);
+	pr_debug("%s(), probing dma=%d\n", __func__, info->dma);
 
 	/* Read mode control register (MCTL) */
 	outb(CFG_108_MCTL, cfg_base);
@@ -731,7 +730,7 @@
 	
 	pnp = (reg >> 3) & 0x01;
 	if (pnp) {
-		IRDA_DEBUG(2, "(), Chip is in PnP mode\n");
+		pr_debug("(), Chip is in PnP mode\n");
 		outb(0x46, cfg_base);
 		reg = (inb(cfg_base+1) & 0xfe) << 2;
 
@@ -835,9 +834,8 @@
 	int enabled;
 
 	/* User is sure about his config... accept it. */
-	IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
-		   "io=0x%04x, irq=%d, dma=%d\n", 
-		   __func__, info->fir_base, info->irq, info->dma);
+	pr_debug("%s(): nsc_ircc_init_39x (user settings): io=0x%04x, irq=%d, dma=%d\n",
+		 __func__, info->fir_base, info->irq, info->dma);
 
 	/* Access bank for SP2 */
 	outb(CFG_39X_LDN, cfg_base);
@@ -877,8 +875,8 @@
 	int reg1, reg2, irq, irqt, dma1, dma2;
 	int enabled, susp;
 
-	IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n",
-		   __func__, cfg_base);
+	pr_debug("%s(), nsc_ircc_probe_39x, base=%d\n",
+		 __func__, cfg_base);
 
 	/* This function should be executed with irq off to avoid
 	 * another driver messing with the Super I/O bank - Jean II */
@@ -912,7 +910,8 @@
 	outb(CFG_39X_SPC, cfg_base);
 	susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1);
 
-	IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __func__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp);
+	pr_debug("%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n",
+		 __func__, reg1, reg2, irq, irqt, dma1, dma2, enabled, susp);
 
 	/* Configure SP2 */
 
@@ -963,8 +962,8 @@
 		!(pnp_dma_flags(dev, 0) & IORESOURCE_DISABLED))
 		pnp_info.dma = pnp_dma(dev, 0);
 
-	IRDA_DEBUG(0, "%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
-		   __func__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
+	pr_debug("%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n",
+		 __func__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma);
 
 	if((pnp_info.fir_base == 0) ||
 	   (pnp_info.irq == -1) || (pnp_info.dma == -1)) {
@@ -992,8 +991,8 @@
 	switch_bank(iobase, BANK3);
 	version = inb(iobase+MID);
 
-	IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n",
-		   __func__, driver_name, version);
+	pr_debug("%s() Driver %s Found chip version %02x\n",
+		 __func__, driver_name, version);
 
 	/* Should be 0x2? */
 	if (0x20 != (version & 0xf0)) {
@@ -1096,39 +1095,39 @@
 	switch (dongle_id) {
 	case 0x00: /* same as */
 	case 0x01: /* Differential serial interface */
-		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s not defined by irda yet\n",
+			 __func__, dongle_types[dongle_id]);
 		break;
 	case 0x02: /* same as */
 	case 0x03: /* Reserved */
-		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s not defined by irda yet\n",
+			 __func__, dongle_types[dongle_id]);
 		break;
 	case 0x04: /* Sharp RY5HD01 */
 		break;
 	case 0x05: /* Reserved, but this is what the Thinkpad reports */
-		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s not defined by irda yet\n",
+			 __func__, dongle_types[dongle_id]);
 		break;
 	case 0x06: /* Single-ended serial interface */
-		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s not defined by irda yet\n",
+			 __func__, dongle_types[dongle_id]);
 		break;
 	case 0x07: /* Consumer-IR only */
-		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s is not for IrDA mode\n",
+			 __func__, dongle_types[dongle_id]);
 		break;
 	case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
-		IRDA_DEBUG(0, "%s(), %s\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s\n",
+			 __func__, dongle_types[dongle_id]);
 		break;
 	case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */
 		outb(0x28, iobase+7); /* Set irsl[0-2] as output */
 		break;
 	case 0x0A: /* same as */
 	case 0x0B: /* Reserved */
-		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s not defined by irda yet\n",
+			 __func__, dongle_types[dongle_id]);
 		break;
 	case 0x0C: /* same as */
 	case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -1142,15 +1141,15 @@
 		outb(0x28, iobase+7); /* Set irsl[0-2] as output */
 		break;
 	case 0x0F: /* No dongle connected */
-		IRDA_DEBUG(0, "%s(), %s\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s\n",
+			 __func__, dongle_types[dongle_id]);
 
 		switch_bank(iobase, BANK0);
 		outb(0x62, iobase+MCR);
 		break;
 	default: 
-		IRDA_DEBUG(0, "%s(), invalid dongle_id %#x", 
-			   __func__, dongle_id);
+		pr_debug("%s(), invalid dongle_id %#x",
+			 __func__, dongle_id);
 	}
 	
 	/* IRCFG1: IRSL1 and 2 are set to IrDA mode */
@@ -1181,31 +1180,31 @@
 	switch (dongle_id) {
 	case 0x00: /* same as */
 	case 0x01: /* Differential serial interface */
-		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s not defined by irda yet\n",
+			 __func__, dongle_types[dongle_id]);
 		break;
 	case 0x02: /* same as */
 	case 0x03: /* Reserved */
-		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s not defined by irda yet\n",
+			 __func__, dongle_types[dongle_id]);
 		break;
 	case 0x04: /* Sharp RY5HD01 */
 		break;
 	case 0x05: /* Reserved */
-		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s not defined by irda yet\n",
+			 __func__, dongle_types[dongle_id]);
 		break;
 	case 0x06: /* Single-ended serial interface */
-		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s not defined by irda yet\n",
+			 __func__, dongle_types[dongle_id]);
 		break;
 	case 0x07: /* Consumer-IR only */
-		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s is not for IrDA mode\n",
+			 __func__, dongle_types[dongle_id]);
 		break;
 	case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */
-		IRDA_DEBUG(0, "%s(), %s\n", 
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s\n",
+			 __func__, dongle_types[dongle_id]);
 		outb(0x00, iobase+4);
 		if (speed > 115200)
 			outb(0x01, iobase+4);
@@ -1223,8 +1222,8 @@
 		break;
 	case 0x0A: /* same as */
 	case 0x0B: /* Reserved */
-		IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s not defined by irda yet\n",
+			 __func__, dongle_types[dongle_id]);
 		break;
 	case 0x0C: /* same as */
 	case 0x0D: /* HP HSDL-1100/HSDL-2100 */
@@ -1232,14 +1231,14 @@
 	case 0x0E: /* Supports SIR Mode only */
 		break;
 	case 0x0F: /* No dongle connected */
-		IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n",
-			   __func__, dongle_types[dongle_id]);
+		pr_debug("%s(), %s is not for IrDA mode\n",
+			 __func__, dongle_types[dongle_id]);
 
 		switch_bank(iobase, BANK0); 
 		outb(0x62, iobase+MCR);
 		break;
 	default: 
-		IRDA_DEBUG(0, "%s(), invalid data_rate\n", __func__);
+		pr_debug("%s(), invalid data_rate\n", __func__);
 	}
 	/* Restore bank register */
 	outb(bank, iobase+BSR);
@@ -1260,7 +1259,7 @@
 	__u8 bank;
 	__u8 ier;                  /* Interrupt enable register */
 
-	IRDA_DEBUG(2, "%s(), speed=%d\n", __func__, speed);
+	pr_debug("%s(), speed=%d\n", __func__, speed);
 
 	IRDA_ASSERT(self != NULL, return 0;);
 
@@ -1293,20 +1292,20 @@
 		outb(inb(iobase+4) | 0x04, iobase+4);
 	       
 		mcr = MCR_MIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__);
+		pr_debug("%s(), handling baud of 576000\n", __func__);
 		break;
 	case 1152000:
 		mcr = MCR_MIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__);
+		pr_debug("%s(), handling baud of 1152000\n", __func__);
 		break;
 	case 4000000:
 		mcr = MCR_FIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__);
+		pr_debug("%s(), handling baud of 4000000\n", __func__);
 		break;
 	default:
 		mcr = MCR_FIR;
-		IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", 
-			   __func__, speed);
+		pr_debug("%s(), unknown baud rate of %d\n",
+			 __func__, speed);
 		break;
 	}
 
@@ -1613,15 +1612,13 @@
 	int actual = 0;
 	__u8 bank;
 	
-	IRDA_DEBUG(4, "%s()\n", __func__);
-
 	/* Save current bank */
 	bank = inb(iobase+BSR);
 
 	switch_bank(iobase, BANK0);
 	if (!(inb_p(iobase+LSR) & LSR_TXEMP)) {
-		IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n",
-			   __func__);
+		pr_debug("%s(), warning, FIFO not empty yet!\n",
+			 __func__);
 
 		/* FIFO may still be filled to the Tx interrupt threshold */
 		fifo_size -= 17;
@@ -1633,8 +1630,8 @@
 		outb(buf[actual++], iobase+TXD);
 	}
         
-	IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", 
-		   __func__, fifo_size, actual, len);
+	pr_debug("%s(), fifo_size %d ; %d sent of %d\n",
+		 __func__, fifo_size, actual, len);
 	
 	/* Restore bank */
 	outb(bank, iobase+BSR);
@@ -1655,8 +1652,6 @@
 	__u8 bank;
 	int ret = TRUE;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	iobase = self->io.fir_base;
 
 	/* Save current bank */
@@ -1786,7 +1781,7 @@
 		len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8);
 
 		if (st_fifo->tail >= MAX_RX_WINDOW) {
-			IRDA_DEBUG(0, "%s(), window is full!\n", __func__);
+			pr_debug("%s(), window is full!\n", __func__);
 			continue;
 		}
 			
@@ -1980,7 +1975,7 @@
 		 * Need to be after self->io.direction to avoid race with
 		 * nsc_ircc_hard_xmit_sir() - Jean II */
 		if (self->new_speed) {
-			IRDA_DEBUG(2, "%s(), Changing speed!\n", __func__);
+			pr_debug("%s(), Changing speed!\n", __func__);
 			self->ier = nsc_ircc_change_speed(self,
 							  self->new_speed);
 			self->new_speed = 0;
@@ -2174,7 +2169,6 @@
 	char hwname[32];
 	__u8 bank;
 	
-	IRDA_DEBUG(4, "%s()\n", __func__);
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = netdev_priv(dev);
@@ -2236,7 +2230,6 @@
 	int iobase;
 	__u8 bank;
 
-	IRDA_DEBUG(4, "%s()\n", __func__);
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 
@@ -2290,7 +2283,7 @@
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
+	pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 	
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -2329,7 +2322,7 @@
 	if (self->io.suspended)
 		return 0;
 
-	IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
+	pr_debug("%s, Suspending\n", driver_name);
 
 	rtnl_lock();
 	if (netif_running(self->netdev)) {
@@ -2363,7 +2356,7 @@
 	if (!self->io.suspended)
 		return 0;
 
-	IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
+	pr_debug("%s, Waking up\n", driver_name);
 
 	rtnl_lock();
 	nsc_ircc_setup(&self->io);
diff --git a/drivers/net/irda/old_belkin-sir.c b/drivers/net/irda/old_belkin-sir.c
index f237136..a7c2e99 100644
--- a/drivers/net/irda/old_belkin-sir.c
+++ b/drivers/net/irda/old_belkin-sir.c
@@ -90,8 +90,6 @@
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Power on dongle */
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
 
@@ -108,8 +106,6 @@
 
 static int old_belkin_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
 
@@ -123,8 +119,6 @@
  */
 static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	dev->speed = 9600;
 	return (speed==dev->speed) ? 0 : -EINVAL;
 }
@@ -137,8 +131,6 @@
  */
 static int old_belkin_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* This dongles speed "defaults" to 9600 bps ;-) */
 	dev->speed = 9600;
 
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index 5bfcd25..6af26a7 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -109,11 +109,11 @@
 	int ret = -1;
 	unsigned delay;
 
-	IRDA_DEBUG(2, "%s(), <%ld>\n", __func__, jiffies);
+	pr_debug("%s(), <%ld>\n", __func__, jiffies);
 
 	do {
-		IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
-			__func__, fsm->state, fsm->substate);
+		pr_debug("%s - state=0x%04x / substate=0x%04x\n",
+			 __func__, fsm->state, fsm->substate);
 
 		next_state = fsm->state;
 		delay = 0;
@@ -287,12 +287,12 @@
 {
 	struct sir_fsm *fsm = &dev->fsm;
 
-	IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __func__,
-			initial_state, param);
+	pr_debug("%s - state=0x%04x / param=%u\n", __func__,
+		 initial_state, param);
 
 	if (down_trylock(&fsm->sem)) {
 		if (in_interrupt()  ||  in_atomic()  ||  irqs_disabled()) {
-			IRDA_DEBUG(1, "%s(), state machine busy!\n", __func__);
+			pr_debug("%s(), state machine busy!\n", __func__);
 			return -EWOULDBLOCK;
 		} else
 			down(&fsm->sem);
@@ -345,7 +345,7 @@
 {
 	int err;
 
-	IRDA_DEBUG(3, "%s : requesting dongle %d.\n", __func__, type);
+	pr_debug("%s : requesting dongle %d.\n", __func__, type);
 
 	err = sirdev_schedule_dongle_open(dev, type);
 	if (unlikely(err))
@@ -380,7 +380,7 @@
 
 	ret = dev->drv->do_write(dev, dev->tx_buff.data, dev->tx_buff.len);
 	if (ret > 0) {
-		IRDA_DEBUG(3, "%s(), raw-tx started\n", __func__);
+		pr_debug("%s(), raw-tx started\n", __func__);
 
 		dev->tx_buff.data += ret;
 		dev->tx_buff.len -= ret;
@@ -440,8 +440,8 @@
 	
 	spin_lock_irqsave(&dev->tx_lock, flags);
 
-	IRDA_DEBUG(3, "%s() - dev->tx_buff.len = %d\n",
-		   __func__, dev->tx_buff.len);
+	pr_debug("%s() - dev->tx_buff.len = %d\n",
+		 __func__, dev->tx_buff.len);
 
 	if (likely(dev->tx_buff.len > 0))  {
 		/* Write data left in transmit buffer */
@@ -475,7 +475,7 @@
 		 * restarted when the irda-thread has completed the request.
 		 */
 
-		IRDA_DEBUG(3, "%s(), raw-tx done\n", __func__);
+		pr_debug("%s(), raw-tx done\n", __func__);
 		dev->raw_tx = 0;
 		goto done;	/* no post-frame handling in raw mode */
 	}
@@ -492,7 +492,7 @@
 	 * re-activated.
 	 */
 
-	IRDA_DEBUG(5, "%s(), finished with frame!\n", __func__);
+	pr_debug("%s(), finished with frame!\n", __func__);
 		
 	if ((skb=dev->tx_skb) != NULL) {
 		dev->tx_skb = NULL;
@@ -502,7 +502,7 @@
 	}
 
 	if (unlikely(dev->new_speed > 0)) {
-		IRDA_DEBUG(5, "%s(), Changing speed!\n", __func__);
+		pr_debug("%s(), Changing speed!\n", __func__);
 		err = sirdev_schedule_speed(dev, dev->new_speed);
 		if (unlikely(err)) {
 			/* should never happen
@@ -552,7 +552,7 @@
 		 */
 		irda_device_set_media_busy(dev->netdev, TRUE);
 		dev->netdev->stats.rx_dropped++;
-		IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __func__, count);
+		pr_debug("%s; rx-drop: %zd\n", __func__, count);
 		return 0;
 	}
 
@@ -598,7 +598,7 @@
 
 	netif_stop_queue(ndev);
 
-	IRDA_DEBUG(3, "%s(), skb->len = %d\n", __func__, skb->len);
+	pr_debug("%s(), skb->len = %d\n", __func__, skb->len);
 
 	speed = irda_get_next_speed(skb);
 	if ((speed != dev->speed) && (speed != -1)) {
@@ -635,7 +635,7 @@
 
 	/* Check problems */
 	if(spin_is_locked(&dev->tx_lock)) {
-		IRDA_DEBUG(3, "%s(), write not completed\n", __func__);
+		pr_debug("%s(), write not completed\n", __func__);
 	}
 
 	/* serialize with write completion */
@@ -684,7 +684,7 @@
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 
-	IRDA_DEBUG(3, "%s(), %s, (cmd=0x%X)\n", __func__, ndev->name, cmd);
+	pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, ndev->name, cmd);
 	
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -801,8 +801,6 @@
 	if (!try_module_get(drv->owner))
 		return -ESTALE;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	if (sirdev_alloc_buffers(dev))
 		goto errout_dec;
 
@@ -819,7 +817,7 @@
 
 	netif_wake_queue(ndev);
 
-	IRDA_DEBUG(2, "%s - done, speed = %d\n", __func__, dev->speed);
+	pr_debug("%s - done, speed = %d\n", __func__, dev->speed);
 
 	return 0;
 
@@ -839,7 +837,7 @@
 	struct sir_dev *dev = netdev_priv(ndev);
 	const struct sir_driver *drv;
 
-//	IRDA_DEBUG(0, "%s\n", __func__);
+/* pr_debug("%s\n", __func__); */
 
 	netif_stop_queue(ndev);
 
@@ -881,7 +879,7 @@
 	struct net_device *ndev;
 	struct sir_dev *dev;
 
-	IRDA_DEBUG(0, "%s - %s\n", __func__, name);
+	pr_debug("%s - %s\n", __func__, name);
 
 	/* instead of adding tests to protect against drv->do_write==NULL
 	 * at several places we refuse to create a sir_dev instance for
@@ -939,7 +937,7 @@
 {
 	int err = 0;
 
-	IRDA_DEBUG(0, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	atomic_set(&dev->enable_rx, 0);
 
diff --git a/drivers/net/irda/sir_dongle.c b/drivers/net/irda/sir_dongle.c
index cfbabb6..7436f73 100644
--- a/drivers/net/irda/sir_dongle.c
+++ b/drivers/net/irda/sir_dongle.c
@@ -34,8 +34,8 @@
 	struct list_head *entry;
 	struct dongle_driver *drv;
 
-	IRDA_DEBUG(0, "%s : registering dongle \"%s\" (%d).\n",
-		   __func__, new->driver_name, new->type);
+	pr_debug("%s : registering dongle \"%s\" (%d).\n",
+		 __func__, new->driver_name, new->type);
 
 	mutex_lock(&dongle_list_lock);
 	list_for_each(entry, &dongle_list) {
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index a7f0f52..b455ffe 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -461,7 +461,7 @@
 {
 	int ret;
 
-	IRDA_DEBUG(1, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	ret = platform_driver_register(&smsc_ircc_driver);
 	if (ret) {
@@ -523,7 +523,7 @@
 	struct net_device *dev;
 	int err;
 
-	IRDA_DEBUG(1, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	err = smsc_ircc_present(fir_base, sir_base);
 	if (err)
@@ -803,7 +803,7 @@
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
+	pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd);
 
 	switch (cmd) {
 	case SIOCSBANDWIDTH: /* Set bandwidth */
@@ -882,7 +882,7 @@
 	unsigned long flags;
 	s32 speed;
 
-	IRDA_DEBUG(1, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	IRDA_ASSERT(dev != NULL, return NETDEV_TX_OK;);
 
@@ -957,21 +957,21 @@
 		ir_mode = IRCC_CFGA_IRDA_HDLC;
 		ctrl = IRCC_CRC;
 		fast = 0;
-		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__);
+		pr_debug("%s(), handling baud of 576000\n", __func__);
 		break;
 	case 1152000:
 		ir_mode = IRCC_CFGA_IRDA_HDLC;
 		ctrl = IRCC_1152 | IRCC_CRC;
 		fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA;
-		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n",
-			   __func__);
+		pr_debug("%s(), handling baud of 1152000\n",
+			 __func__);
 		break;
 	case 4000000:
 		ir_mode = IRCC_CFGA_IRDA_4PPM;
 		ctrl = IRCC_CRC;
 		fast = IRCC_LCR_A_FAST;
-		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n",
-			   __func__);
+		pr_debug("%s(), handling baud of 4000000\n",
+			 __func__);
 		break;
 	}
 	#if 0
@@ -999,7 +999,7 @@
 	struct net_device *dev;
 	int fir_base;
 
-	IRDA_DEBUG(1, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return;);
 	dev = self->netdev;
@@ -1044,7 +1044,7 @@
 {
 	int fir_base;
 
-	IRDA_DEBUG(1, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return;);
 
@@ -1068,7 +1068,7 @@
 	struct net_device *dev;
 	int last_speed_was_sir;
 
-	IRDA_DEBUG(0, "%s() changing speed to: %d\n", __func__, speed);
+	pr_debug("%s() changing speed to: %d\n", __func__, speed);
 
 	IRDA_ASSERT(self != NULL, return;);
 	dev = self->netdev;
@@ -1136,7 +1136,7 @@
 	int lcr;    /* Line control reg */
 	int divisor;
 
-	IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __func__, speed);
+	pr_debug("%s(), Setting speed to: %d\n", __func__, speed);
 
 	IRDA_ASSERT(self != NULL, return;);
 	iobase = self->io.sir_base;
@@ -1171,7 +1171,7 @@
 	/* Turn on interrups */
 	outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER);
 
-	IRDA_DEBUG(2, "%s() speed changed to: %d\n", __func__, speed);
+	pr_debug("%s() speed changed to: %d\n", __func__, speed);
 }
 
 
@@ -1255,7 +1255,7 @@
 	int iobase = self->io.fir_base;
 	u8 ctrl;
 
-	IRDA_DEBUG(3, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 #if 1
 	/* Disable Rx */
 	register_bank(iobase, 0);
@@ -1309,7 +1309,7 @@
 {
 	int iobase = self->io.fir_base;
 
-	IRDA_DEBUG(3, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 #if 0
 	/* Disable Tx */
 	register_bank(iobase, 0);
@@ -1413,7 +1413,7 @@
 
 	register_bank(iobase, 0);
 
-	IRDA_DEBUG(3, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 #if 0
 	/* Disable Rx */
 	register_bank(iobase, 0);
@@ -1424,8 +1424,8 @@
 	lsr= inb(iobase + IRCC_LSR);
 	msgcnt = inb(iobase + IRCC_LCR_B) & 0x08;
 
-	IRDA_DEBUG(2, "%s: dma count = %d\n", __func__,
-		   get_dma_residue(self->io.dma));
+	pr_debug("%s: dma count = %d\n", __func__,
+		 get_dma_residue(self->io.dma));
 
 	len = self->rx_buff.truesize - get_dma_residue(self->io.dma);
 
@@ -1450,7 +1450,7 @@
 		net_warn_ratelimited("%s(), bogus len=%d\n", __func__, len);
 		return;
 	}
-	IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __func__, msgcnt, len);
+	pr_debug("%s: msgcnt = %d, len=%d\n", __func__, msgcnt, len);
 
 	skb = dev_alloc_skb(len + 1);
 	if (!skb)
@@ -1494,7 +1494,7 @@
 
 		/* Make sure we don't stay here to long */
 		if (boguscount++ > 32) {
-			IRDA_DEBUG(2, "%s(), breaking!\n", __func__);
+			pr_debug("%s(), breaking!\n", __func__);
 			break;
 		}
 	} while (inb(iobase + UART_LSR) & UART_LSR_DR);
@@ -1536,7 +1536,7 @@
 	lcra = inb(iobase + IRCC_LCR_A);
 	lsr = inb(iobase + IRCC_LSR);
 
-	IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __func__, iir);
+	pr_debug("%s(), iir = 0x%02x\n", __func__, iir);
 
 	if (iir & IRCC_IIR_EOM) {
 		if (self->io.direction == IO_RECV)
@@ -1586,12 +1586,12 @@
 		/* Clear interrupt */
 		lsr = inb(iobase + UART_LSR);
 
-		IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
-			    __func__, iir, lsr, iobase);
+		pr_debug("%s(), iir=%02x, lsr=%02x, iobase=%#x\n",
+			 __func__, iir, lsr, iobase);
 
 		switch (iir) {
 		case UART_IIR_RLSI:
-			IRDA_DEBUG(2, "%s(), RLSI\n", __func__);
+			pr_debug("%s(), RLSI\n", __func__);
 			break;
 		case UART_IIR_RDI:
 			/* Receive interrupt */
@@ -1603,8 +1603,8 @@
 				smsc_ircc_sir_write_wakeup(self);
 			break;
 		default:
-			IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n",
-				   __func__, iir);
+			pr_debug("%s(), unhandled IIR=%#x\n",
+				 __func__, iir);
 			break;
 		}
 
@@ -1631,12 +1631,12 @@
 	int status = FALSE;
 	/* int iobase; */
 
-	IRDA_DEBUG(1, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return FALSE;);
 
-	IRDA_DEBUG(0, "%s: dma count = %d\n", __func__,
-		   get_dma_residue(self->io.dma));
+	pr_debug("%s: dma count = %d\n", __func__,
+		 get_dma_residue(self->io.dma));
 
 	status = (self->rx_buff.state != OUTSIDE_FRAME);
 
@@ -1651,8 +1651,8 @@
 	error = request_irq(self->io.irq, smsc_ircc_interrupt, 0,
 			    self->netdev->name, self->netdev);
 	if (error)
-		IRDA_DEBUG(0, "%s(), unable to allocate irq=%d, err=%d\n",
-			   __func__, self->io.irq, error);
+		pr_debug("%s(), unable to allocate irq=%d, err=%d\n",
+			 __func__, self->io.irq, error);
 
 	return error;
 }
@@ -1696,21 +1696,21 @@
 	struct smsc_ircc_cb *self;
 	char hwname[16];
 
-	IRDA_DEBUG(1, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = netdev_priv(dev);
 	IRDA_ASSERT(self != NULL, return 0;);
 
 	if (self->io.suspended) {
-		IRDA_DEBUG(0, "%s(), device is suspended\n", __func__);
+		pr_debug("%s(), device is suspended\n", __func__);
 		return -EAGAIN;
 	}
 
 	if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name,
 			(void *) dev)) {
-		IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n",
-			   __func__, self->io.irq);
+		pr_debug("%s(), unable to allocate irq=%d\n",
+			 __func__, self->io.irq);
 		return -EAGAIN;
 	}
 
@@ -1753,7 +1753,7 @@
 {
 	struct smsc_ircc_cb *self;
 
-	IRDA_DEBUG(1, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = netdev_priv(dev);
@@ -1784,7 +1784,7 @@
 	struct smsc_ircc_cb *self = platform_get_drvdata(dev);
 
 	if (!self->io.suspended) {
-		IRDA_DEBUG(1, "%s, Suspending\n", driver_name);
+		pr_debug("%s, Suspending\n", driver_name);
 
 		rtnl_lock();
 		if (netif_running(self->netdev)) {
@@ -1805,7 +1805,7 @@
 	struct smsc_ircc_cb *self = platform_get_drvdata(dev);
 
 	if (self->io.suspended) {
-		IRDA_DEBUG(1, "%s, Waking up\n", driver_name);
+		pr_debug("%s, Waking up\n", driver_name);
 
 		rtnl_lock();
 		smsc_ircc_init_chip(self);
@@ -1836,7 +1836,7 @@
  */
 static int __exit smsc_ircc_close(struct smsc_ircc_cb *self)
 {
-	IRDA_DEBUG(1, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
@@ -1848,13 +1848,13 @@
 	smsc_ircc_stop_interrupts(self);
 
 	/* Release the PORTS that this driver is using */
-	IRDA_DEBUG(0, "%s(), releasing 0x%03x\n",  __func__,
-		   self->io.fir_base);
+	pr_debug("%s(), releasing 0x%03x\n",  __func__,
+		 self->io.fir_base);
 
 	release_region(self->io.fir_base, self->io.fir_ext);
 
-	IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __func__,
-		   self->io.sir_base);
+	pr_debug("%s(), releasing 0x%03x\n", __func__,
+		 self->io.sir_base);
 
 	release_region(self->io.sir_base, self->io.sir_ext);
 
@@ -1875,7 +1875,7 @@
 {
 	int i;
 
-	IRDA_DEBUG(1, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	for (i = 0; i < 2; i++) {
 		if (dev_self[i])
@@ -1899,7 +1899,7 @@
 	struct net_device *dev;
 	int fir_base, sir_base;
 
-	IRDA_DEBUG(3, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	IRDA_ASSERT(self != NULL, return;);
 	dev = self->netdev;
@@ -1925,7 +1925,7 @@
 	/* Turn on interrups */
 	outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER);
 
-	IRDA_DEBUG(3, "%s() - exit\n", __func__);
+	pr_debug("%s() - exit\n", __func__);
 
 	outb(0x00, fir_base + IRCC_MASTER);
 }
@@ -1935,7 +1935,7 @@
 {
 	int iobase;
 
-	IRDA_DEBUG(3, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 	iobase = self->io.sir_base;
 
 	/* Reset UART */
@@ -1961,7 +1961,7 @@
 
 	IRDA_ASSERT(self != NULL, return;);
 
-	IRDA_DEBUG(4, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	iobase = self->io.sir_base;
 
@@ -1982,8 +1982,8 @@
 		 *  if we need to change the speed of the hardware
 		 */
 		if (self->new_speed) {
-			IRDA_DEBUG(5, "%s(), Changing speed to %d.\n",
-				   __func__, self->new_speed);
+			pr_debug("%s(), Changing speed to %d.\n",
+				 __func__, self->new_speed);
 			smsc_ircc_sir_wait_hw_transmitter_finish(self);
 			smsc_ircc_change_speed(self, self->new_speed);
 			self->new_speed = 0;
@@ -2123,7 +2123,7 @@
 		udelay(1);
 
 	if (count < 0)
-		IRDA_DEBUG(0, "%s(): stuck transmitter\n", __func__);
+		pr_debug("%s(): stuck transmitter\n", __func__);
 }
 
 
@@ -2184,7 +2184,7 @@
 	u8 mode, dma, irq;
 	int ret = -ENODEV;
 
-	IRDA_DEBUG(1, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL)
 		return ret;
@@ -2235,7 +2235,7 @@
 	unsigned short fir_io, sir_io;
 	int ret = -ENODEV;
 
-	IRDA_DEBUG(1, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL)
 		return ret;
@@ -2269,7 +2269,7 @@
 
 static int __init smsc_access(unsigned short cfg_base, unsigned char reg)
 {
-	IRDA_DEBUG(1, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	outb(reg, cfg_base);
 	return inb(cfg_base) != reg ? -1 : 0;
@@ -2279,7 +2279,7 @@
 {
 	u8 devid, xdevid, rev;
 
-	IRDA_DEBUG(1, "%s\n", __func__);
+	pr_debug("%s\n", __func__);
 
 	/* Leave configuration */
 
@@ -2534,9 +2534,8 @@
 	outb(LPC47N227_CFGACCESSKEY, iobase); // enter configuration state
 	outb(SMSCSIOFLAT_DEVICEID_REG, iobase); // set for device ID
 	tmpbyte = inb(iobase +1); // Read device ID
-	IRDA_DEBUG(0,
-		   "Detected Chip id: 0x%02x, setting up registers...\n",
-		   tmpbyte);
+	pr_debug("Detected Chip id: 0x%02x, setting up registers...\n",
+		 tmpbyte);
 
 	/* Disable UART1 and set up SIR I/O port */
 	outb(0x24, iobase);  // select CR24 - UART1 base addr
@@ -2682,7 +2681,7 @@
 	default:
 		tmpbyte |= 0x01; /* COM2 default */
 	}
-	IRDA_DEBUG(1, "COM_DEC (write): 0x%02x\n", tmpbyte);
+	pr_debug("COM_DEC (write): 0x%02x\n", tmpbyte);
 	pci_write_config_byte(dev, COM_DEC, tmpbyte);
 
 	/* Enable Low Pin Count interface */
@@ -2710,7 +2709,7 @@
 	}
 	tmpword &= 0xfffd; /* disable LPC COMB */
 	tmpword |= 0x0001; /* set bit 0 : enable LPC COMA addr range (GEN2) */
-	IRDA_DEBUG(1, "LPC_EN (write): 0x%04x\n", tmpword);
+	pr_debug("LPC_EN (write): 0x%04x\n", tmpword);
 	pci_write_config_word(dev, LPC_EN, tmpword);
 
 	/*
@@ -2755,7 +2754,7 @@
 	default:
 		break; /* do not change settings */
 	}
-	IRDA_DEBUG(1, "PCI_DMA_C (write): 0x%04x\n", tmpword);
+	pr_debug("PCI_DMA_C (write): 0x%04x\n", tmpword);
 	pci_write_config_word(dev, PCI_DMA_C, tmpword);
 
 	/*
@@ -2766,7 +2765,7 @@
 	 */
 	tmpword = conf->fir_io & 0xfff8;
 	tmpword |= 0x0001;
-	IRDA_DEBUG(1, "GEN2_DEC (write): 0x%04x\n", tmpword);
+	pr_debug("GEN2_DEC (write): 0x%04x\n", tmpword);
 	pci_write_config_word(dev, GEN2_DEC, tmpword);
 
 	/* Pre-configure chip */
diff --git a/drivers/net/irda/tekram-sir.c b/drivers/net/irda/tekram-sir.c
index 04db4ea..9dcf0c1 100644
--- a/drivers/net/irda/tekram-sir.c
+++ b/drivers/net/irda/tekram-sir.c
@@ -63,8 +63,8 @@
 {
 	if (tekram_delay < 1  ||  tekram_delay > 500)
 		tekram_delay = 200;
-	IRDA_DEBUG(1, "%s - using %d ms delay\n",
-		tekram.driver_name, tekram_delay);
+	pr_debug("%s - using %d ms delay\n",
+		 tekram.driver_name, tekram_delay);
 	return irda_register_dongle(&tekram);
 }
 
@@ -77,8 +77,6 @@
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	sirdev_set_dtr_rts(dev, TRUE, TRUE);
 
 	qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
@@ -92,8 +90,6 @@
 
 static int tekram_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
 
@@ -130,8 +126,6 @@
 	u8 byte;
 	static int ret = 0;
 	
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	switch(state) {
 	case SIRDEV_STATE_DONGLE_SPEED:
 
@@ -205,8 +199,6 @@
 
 static int tekram_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Clear DTR, Set RTS */
 	sirdev_set_dtr_rts(dev, FALSE, TRUE); 
 
diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c
index 19ad460..6d2f559 100644
--- a/drivers/net/irda/toim3232-sir.c
+++ b/drivers/net/irda/toim3232-sir.c
@@ -168,8 +168,8 @@
 {
 	if (toim3232delay < 1  ||  toim3232delay > 500)
 		toim3232delay = 200;
-	IRDA_DEBUG(1, "%s - using %d ms delay\n",
-		toim3232.driver_name, toim3232delay);
+	pr_debug("%s - using %d ms delay\n",
+		 toim3232.driver_name, toim3232delay);
 	return irda_register_dongle(&toim3232);
 }
 
@@ -182,8 +182,6 @@
 {
 	struct qos_info *qos = &dev->qos;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Pull the lines high to start with.
 	 *
 	 * For the IR320ST-2, we need to charge the main supply capacitor to
@@ -210,8 +208,6 @@
 
 static int toim3232_close(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Power off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
 
@@ -242,8 +238,6 @@
 	u8 byte;
 	static int ret = 0;
 
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	switch(state) {
 	case SIRDEV_STATE_DONGLE_SPEED:
 
@@ -345,8 +339,6 @@
 
 static int toim3232_reset(struct sir_dev *dev)
 {
-	IRDA_DEBUG(2, "%s()\n", __func__);
-
 	/* Switch off both DTR and RTS to switch off dongle */
 	sirdev_set_dtr_rts(dev, FALSE, FALSE);
 
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index b07b4cc..6960d4c 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -144,12 +144,10 @@
 {
 	int rc;
 
-	IRDA_DEBUG(3, "%s()\n", __func__);
-
 	rc = pci_register_driver(&via_driver);
 	if (rc < 0) {
-		IRDA_DEBUG(0, "%s(): error rc = %d, returning  -ENODEV...\n",
-			   __func__, rc);
+		pr_debug("%s(): error rc = %d, returning  -ENODEV...\n",
+			 __func__, rc);
 		return -ENODEV;
 	}
 	return 0;
@@ -162,11 +160,11 @@
 	u16 Chipset,FirDRQ1,FirDRQ0,FirIRQ,FirIOBase;
 	chipio_t info;
 
-	IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __func__, id->device);
+	pr_debug("%s(): Device ID=(0X%X)\n", __func__, id->device);
 
 	rc = pci_enable_device (pcidev);
 	if (rc) {
-		IRDA_DEBUG(0, "%s(): error rc = %d\n", __func__, rc);
+		pr_debug("%s(): error rc = %d\n", __func__, rc);
 		return -ENODEV;
 	}
 
@@ -177,7 +175,7 @@
 		Chipset=0x3076;
 
 	if (Chipset==0x3076) {
-		IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __func__);
+		pr_debug("%s(): Chipset = 3076\n", __func__);
 
 		WriteLPCReg(7,0x0c );
 		temp=ReadLPCReg(0x30);//check if BIOS Enable Fir
@@ -213,7 +211,7 @@
 		} else
 			rc = -ENODEV; //IR not turn on	 
 	} else { //Not VT1211
-		IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __func__);
+		pr_debug("%s(): Chipset = 3096\n", __func__);
 
 		pci_read_config_byte(pcidev,0x67,&bTmp);//check if BIOS Enable Fir
 		if((bTmp&0x01)==1) {  // BIOS enable FIR
@@ -252,14 +250,12 @@
 			rc = -ENODEV; //IR not turn on !!!!!
 	}//Not VT1211
 
-	IRDA_DEBUG(2, "%s(): End - rc = %d\n", __func__, rc);
+	pr_debug("%s(): End - rc = %d\n", __func__, rc);
 	return rc;
 }
 
 static void __exit via_ircc_cleanup(void)
 {
-	IRDA_DEBUG(3, "%s()\n", __func__);
-
 	/* Cleanup all instances of the driver */
 	pci_unregister_driver (&via_driver); 
 }
@@ -289,8 +285,6 @@
 	struct via_ircc_cb *self;
 	int err;
 
-	IRDA_DEBUG(3, "%s()\n", __func__);
-
 	/* Allocate new instance of the driver */
 	dev = alloc_irdadev(sizeof(struct via_ircc_cb));
 	if (dev == NULL) 
@@ -316,8 +310,8 @@
 
 	/* Reserve the ioports that we need */
 	if (!request_region(self->io.fir_base, self->io.fir_ext, driver_name)) {
-		IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
-			   __func__, self->io.fir_base);
+		pr_debug("%s(), can't get iobase of 0x%03x\n",
+			 __func__, self->io.fir_base);
 		err = -ENODEV;
 		goto err_out1;
 	}
@@ -423,8 +417,6 @@
 	struct via_ircc_cb *self = pci_get_drvdata(pdev);
 	int iobase;
 
-	IRDA_DEBUG(3, "%s()\n", __func__);
-
 	iobase = self->io.fir_base;
 
 	ResetChip(iobase, 5);	//hardware reset.
@@ -432,8 +424,8 @@
 	unregister_netdev(self->netdev);
 
 	/* Release the PORT that this driver is using */
-	IRDA_DEBUG(2, "%s(), Releasing Region %03x\n",
-		   __func__, self->io.fir_base);
+	pr_debug("%s(), Releasing Region %03x\n",
+		 __func__, self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 	if (self->tx_buff.head)
 		dma_free_coherent(&pdev->dev, self->tx_buff.truesize,
@@ -458,8 +450,6 @@
 {
 	int iobase = self->io.fir_base;
 
-	IRDA_DEBUG(3, "%s()\n", __func__);
-
 	SetMaxRxPacketSize(iobase, 0x0fff);	//set to max:4095
 	// FIFO Init
 	EnRXFIFOReadyInt(iobase, OFF);
@@ -528,8 +518,8 @@
 	/* speed is unused, as we use IsSIROn()/IsMIROn() */
 	speed = speed;
 
-	IRDA_DEBUG(1, "%s(): change_dongle_speed to %d for 0x%x, %d\n",
-		   __func__, speed, iobase, dongle_id);
+	pr_debug("%s(): change_dongle_speed to %d for 0x%x, %d\n",
+		 __func__, speed, iobase, dongle_id);
 
 	switch (dongle_id) {
 
@@ -618,7 +608,8 @@
 
 	case 0x11:		/* Temic TFDS4500 */
 
-		IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __func__);
+		pr_debug("%s: Temic TFDS4500: One RX pin, TX normal, RX inverted\n",
+			 __func__);
 
 		UseOneRX(iobase, ON);	//use ONE RX....RX1
 		InvertTX(iobase, OFF);
@@ -636,7 +627,8 @@
 			SlowIRRXLowActive(iobase, OFF);
 
 		} else{
-			IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __func__);
+			pr_debug("%s: Warning: TFDS4500 not running in SIR mode !\n",
+				 __func__);
 		}
 		break;
 
@@ -673,7 +665,7 @@
 	iobase = self->io.fir_base;
 	/* Update accounting for new speed */
 	self->io.speed = speed;
-	IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __func__, speed);
+	pr_debug("%s: change_speed to %d bps.\n", __func__, speed);
 
 	WriteReg(iobase, I_ST_CT_0, 0x0);
 
@@ -903,10 +895,10 @@
 		       ((u8 *)self->tx_fifo.queue[self->tx_fifo.ptr].start -
 			self->tx_buff.head) + self->tx_buff_dma,
 		       self->tx_fifo.queue[self->tx_fifo.ptr].len, DMA_TX_MODE);
-	IRDA_DEBUG(1, "%s: tx_fifo.ptr=%x,len=%x,tx_fifo.len=%x..\n",
-		   __func__, self->tx_fifo.ptr,
-		   self->tx_fifo.queue[self->tx_fifo.ptr].len,
-		   self->tx_fifo.len);
+	pr_debug("%s: tx_fifo.ptr=%x,len=%x,tx_fifo.len=%x..\n",
+		 __func__, self->tx_fifo.ptr,
+		 self->tx_fifo.queue[self->tx_fifo.ptr].len,
+		 self->tx_fifo.len);
 
 	SetSendByte(iobase, self->tx_fifo.queue[self->tx_fifo.ptr].len);
 	RXStart(iobase, OFF);
@@ -927,8 +919,6 @@
 	int iobase;
 	u8 Tx_status;
 
-	IRDA_DEBUG(3, "%s()\n", __func__);
-
 	iobase = self->io.fir_base;
 	/* Disable DMA */
 //      DisableDmaChannel(self->io.dma);
@@ -958,10 +948,9 @@
 			self->tx_fifo.ptr++;
 		}
 	}
-	IRDA_DEBUG(1,
-		   "%s: tx_fifo.len=%x ,tx_fifo.ptr=%x,tx_fifo.free=%x...\n",
-		   __func__,
-		   self->tx_fifo.len, self->tx_fifo.ptr, self->tx_fifo.free);
+	pr_debug("%s: tx_fifo.len=%x ,tx_fifo.ptr=%x,tx_fifo.free=%x...\n",
+		 __func__,
+		 self->tx_fifo.len, self->tx_fifo.ptr, self->tx_fifo.free);
 /* F01_S
 	// Any frames to be sent back-to-back? 
 	if (self->tx_fifo.len) {
@@ -996,8 +985,6 @@
 
 	iobase = self->io.fir_base;
 
-	IRDA_DEBUG(3, "%s()\n", __func__);
-
 	self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0;
 	self->tx_fifo.tail = self->tx_buff.head;
 	self->RxDataReady = 0;
@@ -1079,15 +1066,15 @@
 		if (len == 0)
 			return TRUE;	//interrupt only, data maybe move by RxT  
 		if (((len - 4) < 2) || ((len - 4) > 2048)) {
-			IRDA_DEBUG(1, "%s(): Trouble:len=%x,CurCount=%x,LastCount=%x..\n",
-				   __func__, len, RxCurCount(iobase, self),
-				   self->RxLastCount);
+			pr_debug("%s(): Trouble:len=%x,CurCount=%x,LastCount=%x\n",
+				 __func__, len, RxCurCount(iobase, self),
+				 self->RxLastCount);
 			hwreset(self);
 			return FALSE;
 		}
-		IRDA_DEBUG(2, "%s(): fifo.len=%x,len=%x,CurCount=%x..\n",
-			   __func__,
-			   st_fifo->len, len - 4, RxCurCount(iobase, self));
+		pr_debug("%s(): fifo.len=%x,len=%x,CurCount=%x..\n",
+			 __func__,
+			 st_fifo->len, len - 4, RxCurCount(iobase, self));
 
 		st_fifo->entries[st_fifo->tail].status = status;
 		st_fifo->entries[st_fifo->tail].len = len;
@@ -1134,8 +1121,8 @@
 		skb_put(skb, len - 4);
 
 		skb_copy_to_linear_data(skb, self->rx_buff.data, len - 4);
-		IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __func__,
-			   len - 4, self->rx_buff.data);
+		pr_debug("%s(): len=%x.rx_buff=%p\n", __func__,
+			 len - 4, self->rx_buff.data);
 
 		// Move to next frame 
 		self->rx_buff.data += len;
@@ -1164,7 +1151,7 @@
 
 	len = GetRecvByte(iobase, self);
 
-	IRDA_DEBUG(2, "%s(): len=%x\n", __func__, len);
+	pr_debug("%s(): len=%x\n", __func__, len);
 
 	if ((len - 4) < 2) {
 		self->netdev->stats.rx_dropped++;
@@ -1249,8 +1236,8 @@
 			skb_put(skb, len - 4);
 			skb_copy_to_linear_data(skb, self->rx_buff.data, len - 4);
 
-			IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __func__,
-				   len - 4, st_fifo->head);
+			pr_debug("%s(): len=%x.head=%x\n", __func__,
+				 len - 4, st_fifo->head);
 
 			// Move to next frame 
 			self->rx_buff.data += len;
@@ -1263,10 +1250,8 @@
 		}		//while
 		self->RetryCount = 0;
 
-		IRDA_DEBUG(2,
-			   "%s(): End of upload HostStatus=%x,RxStatus=%x\n",
-			   __func__,
-			   GetHostStatus(iobase), GetRXStatus(iobase));
+		pr_debug("%s(): End of upload HostStatus=%x,RxStatus=%x\n",
+			 __func__, GetHostStatus(iobase), GetRXStatus(iobase));
 
 		/*
 		 * if frame is receive complete at this routine ,then upload
@@ -1304,12 +1289,12 @@
 	spin_lock(&self->lock);
 	iHostIntType = GetHostStatus(iobase);
 
-	IRDA_DEBUG(4, "%s(): iHostIntType %02x:  %s %s %s  %02x\n",
-		   __func__, iHostIntType,
-		   (iHostIntType & 0x40) ? "Timer" : "",
-		   (iHostIntType & 0x20) ? "Tx" : "",
-		   (iHostIntType & 0x10) ? "Rx" : "",
-		   (iHostIntType & 0x0e) >> 1);
+	pr_debug("%s(): iHostIntType %02x:  %s %s %s  %02x\n",
+		 __func__, iHostIntType,
+		 (iHostIntType & 0x40) ? "Timer" : "",
+		 (iHostIntType & 0x20) ? "Tx" : "",
+		 (iHostIntType & 0x10) ? "Rx" : "",
+		 (iHostIntType & 0x0e) >> 1);
 
 	if ((iHostIntType & 0x40) != 0) {	//Timer Event
 		self->EventFlag.TimeOut++;
@@ -1334,12 +1319,12 @@
 	if ((iHostIntType & 0x20) != 0) {	//Tx Event
 		iTxIntType = GetTXStatus(iobase);
 
-		IRDA_DEBUG(4, "%s(): iTxIntType %02x:  %s %s %s %s\n",
-			   __func__, iTxIntType,
-			   (iTxIntType & 0x08) ? "FIFO underr." : "",
-			   (iTxIntType & 0x04) ? "EOM" : "",
-			   (iTxIntType & 0x02) ? "FIFO ready" : "",
-			   (iTxIntType & 0x01) ? "Early EOM" : "");
+		pr_debug("%s(): iTxIntType %02x:  %s %s %s %s\n",
+			 __func__, iTxIntType,
+			 (iTxIntType & 0x08) ? "FIFO underr." : "",
+			 (iTxIntType & 0x04) ? "EOM" : "",
+			 (iTxIntType & 0x02) ? "FIFO ready" : "",
+			 (iTxIntType & 0x01) ? "Early EOM" : "");
 
 		if (iTxIntType & 0x4) {
 			self->EventFlag.EOMessage++;	// read and will auto clean
@@ -1358,17 +1343,17 @@
 		/* Check if DMA has finished */
 		iRxIntType = GetRXStatus(iobase);
 
-		IRDA_DEBUG(4, "%s(): iRxIntType %02x:  %s %s %s %s %s %s %s\n",
-			   __func__, iRxIntType,
-			   (iRxIntType & 0x80) ? "PHY err."	: "",
-			   (iRxIntType & 0x40) ? "CRC err"	: "",
-			   (iRxIntType & 0x20) ? "FIFO overr."	: "",
-			   (iRxIntType & 0x10) ? "EOF"		: "",
-			   (iRxIntType & 0x08) ? "RxData"	: "",
-			   (iRxIntType & 0x02) ? "RxMaxLen"	: "",
-			   (iRxIntType & 0x01) ? "SIR bad"	: "");
+		pr_debug("%s(): iRxIntType %02x:  %s %s %s %s %s %s %s\n",
+			 __func__, iRxIntType,
+			 (iRxIntType & 0x80) ? "PHY err."	: "",
+			 (iRxIntType & 0x40) ? "CRC err"	: "",
+			 (iRxIntType & 0x20) ? "FIFO overr."	: "",
+			 (iRxIntType & 0x10) ? "EOF"		: "",
+			 (iRxIntType & 0x08) ? "RxData"		: "",
+			 (iRxIntType & 0x02) ? "RxMaxLen"	: "",
+			 (iRxIntType & 0x01) ? "SIR bad"	: "");
 		if (!iRxIntType)
-			IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __func__);
+			pr_debug("%s(): RxIRQ =0\n", __func__);
 
 		if (iRxIntType & 0x10) {
 			if (via_ircc_dma_receive_complete(self, iobase)) {
@@ -1377,10 +1362,9 @@
 			}
 		}		// No ERR     
 		else {		//ERR
-			IRDA_DEBUG(4, "%s(): RxIRQ ERR:iRxIntType=%x,HostIntType=%x,CurCount=%x,RxLastCount=%x_____\n",
-				   __func__, iRxIntType, iHostIntType,
-				   RxCurCount(iobase, self),
-				   self->RxLastCount);
+			pr_debug("%s(): RxIRQ ERR:iRxIntType=%x,HostIntType=%x,CurCount=%x,RxLastCount=%x_____\n",
+				 __func__, iRxIntType, iHostIntType,
+				 RxCurCount(iobase, self), self->RxLastCount);
 
 			if (iRxIntType & 0x20) {	//FIFO OverRun ERR
 				ResetChip(iobase, 0);
@@ -1403,8 +1387,6 @@
 	int iobase;
 	iobase = self->io.fir_base;
 
-	IRDA_DEBUG(3, "%s()\n", __func__);
-
 	ResetChip(iobase, 5);
 	EnableDMA(iobase, OFF);
 	EnableTX(iobase, OFF);
@@ -1448,7 +1430,7 @@
 	if (CkRxRecv(iobase, self))
 		status = TRUE;
 
-	IRDA_DEBUG(2, "%s(): status=%x....\n", __func__, status);
+	pr_debug("%s(): status=%x....\n", __func__, status);
 
 	return status;
 }
@@ -1466,8 +1448,6 @@
 	int iobase;
 	char hwname[32];
 
-	IRDA_DEBUG(3, "%s()\n", __func__);
-
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = netdev_priv(dev);
 	dev->stats.rx_packets = 0;
@@ -1533,8 +1513,6 @@
 	struct via_ircc_cb *self;
 	int iobase;
 
-	IRDA_DEBUG(3, "%s()\n", __func__);
-
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = netdev_priv(dev);
 	IRDA_ASSERT(self != NULL, return 0;);
@@ -1577,8 +1555,8 @@
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = netdev_priv(dev);
 	IRDA_ASSERT(self != NULL, return -1;);
-	IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name,
-		   cmd);
+	pr_debug("%s(), %s, (cmd=0x%X)\n", __func__, dev->name,
+		 cmd);
 	/* Disable interrupts & save flags */
 	spin_lock_irqsave(&self->lock, flags);
 	switch (cmd) {
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index fd4dede..ac39d9f 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -556,7 +556,7 @@
 	crclen = (idev->mode==IFF_FIR) ? sizeof(u32) : sizeof(u16);
 	len -= crclen;		/* remove trailing CRC */
 	if (len <= 0) {
-		IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __func__, len);
+		pr_debug("%s: strange frame (len=%d)\n", __func__, len);
 		ret |= VLSI_RX_DROP;
 		goto done;
 	}
@@ -571,7 +571,7 @@
 		 */
 		le16_to_cpus(rd->buf+len);
 		if (irda_calc_crc16(INIT_FCS,rd->buf,len+crclen) != GOOD_FCS) {
-			IRDA_DEBUG(0, "%s: crc error\n", __func__);
+			pr_debug("%s: crc error\n", __func__);
 			ret |= VLSI_RX_CRC;
 			goto done;
 		}
@@ -689,7 +689,7 @@
 		if (rd_is_active(rd)) {
 			rd_set_status(rd, 0);
 			if (rd_get_count(rd)) {
-				IRDA_DEBUG(0, "%s - dropping rx packet\n", __func__);
+				pr_debug("%s - dropping rx packet\n", __func__);
 				ret = -VLSI_RX_DROP;
 			}
 			rd_set_count(rd, 0);
@@ -764,7 +764,7 @@
 	int	fifocnt;
 
 	baudrate = idev->new_baud;
-	IRDA_DEBUG(2, "%s: %d -> %d\n", __func__, idev->baud, idev->new_baud);
+	pr_debug("%s: %d -> %d\n", __func__, idev->baud, idev->new_baud);
 	if (baudrate == 4000000) {
 		mode = IFF_FIR;
 		config = IRCFG_FIR;
@@ -798,7 +798,7 @@
 
 	fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
 	if (fifocnt != 0) {
-		IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __func__, fifocnt);
+		pr_debug("%s: rx fifo not empty(%d)\n", __func__, fifocnt);
 	}
 
 	outw(0, iobase+VLSI_PIO_IRENABLE);
@@ -1022,7 +1022,8 @@
 
 		fifocnt = inw(ndev->base_addr+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
 		if (fifocnt != 0) {
-			IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __func__, fifocnt);
+			pr_debug("%s: rx fifo not empty(%d)\n",
+				 __func__, fifocnt);
 		}
 
 		config = inw(iobase+VLSI_PIO_IRCFG);
@@ -1034,7 +1035,7 @@
 
 	if (ring_put(r) == NULL) {
 		netif_stop_queue(ndev);
-		IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __func__);
+		pr_debug("%s: tx ring full - queue stopped\n", __func__);
 	}
 	spin_unlock_irqrestore(&idev->lock, flags);
 
@@ -1099,8 +1100,8 @@
 
 		fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK;
 		if (fifocnt != 0) {
-			IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n",
-				__func__, fifocnt);
+			pr_debug("%s: rx fifo not empty(%d)\n",
+				 __func__, fifocnt);
 		}
 		outw(config | IRCFG_ENTX, iobase+VLSI_PIO_IRCFG);
 	}
@@ -1109,7 +1110,7 @@
 
 	if (netif_queue_stopped(ndev)  &&  !idev->new_baud) {
 		netif_wake_queue(ndev);
-		IRDA_DEBUG(3, "%s: queue awoken\n", __func__);
+		pr_debug("%s: queue awoken\n", __func__);
 	}
 }
 
@@ -1133,7 +1134,7 @@
 				dev_kfree_skb_any(rd->skb);
 				rd->skb = NULL;
 			}
-			IRDA_DEBUG(0, "%s - dropping tx packet\n", __func__);
+			pr_debug("%s - dropping tx packet\n", __func__);
 			ret = -VLSI_TX_DROP;
 		}
 		else
@@ -1191,8 +1192,8 @@
 			else			/* was: clksrc=0(auto) */
 				clksrc = 3;	/* fallback to 40MHz XCLK (OB800) */
 
-			IRDA_DEBUG(0, "%s: PLL not locked, fallback to clksrc=%d\n",
-				__func__, clksrc);
+			pr_debug("%s: PLL not locked, fallback to clksrc=%d\n",
+				 __func__, clksrc);
 		}
 		else
 			clksrc = 1;	/* got successful PLL lock */
diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c
index 86ca123..4e3d2e7 100644
--- a/drivers/net/irda/w83977af_ir.c
+++ b/drivers/net/irda/w83977af_ir.c
@@ -110,8 +110,6 @@
 {
         int i;
 
-	IRDA_DEBUG(0, "%s()\n", __func__ );
-
 	for (i=0; i < ARRAY_SIZE(dev_self) && io[i] < 2000; i++) {
 		if (w83977af_open(i, io[i], irq[i], dma[i]) == 0)
 			return 0;
@@ -129,8 +127,6 @@
 {
 	int i;
 
-        IRDA_DEBUG(4, "%s()\n", __func__ );
-
 	for (i=0; i < ARRAY_SIZE(dev_self); i++) {
 		if (dev_self[i])
 			w83977af_close(dev_self[i]);
@@ -157,12 +153,10 @@
         struct w83977af_ir *self;
 	int err;
 
-	IRDA_DEBUG(0, "%s()\n", __func__ );
-
 	/* Lock the port that we need */
 	if (!request_region(iobase, CHIP_IO_EXTENT, driver_name)) {
-		IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n",
-		      __func__ , iobase);
+		pr_debug("%s(), can't get iobase of 0x%03x\n",
+			 __func__ , iobase);
 		return -ENODEV;
 	}
 
@@ -269,8 +263,6 @@
 {
 	int iobase;
 
-	IRDA_DEBUG(0, "%s()\n", __func__ );
-
         iobase = self->io.fir_base;
 
 #ifdef CONFIG_USE_W977_PNP
@@ -289,8 +281,8 @@
 	unregister_netdev(self->netdev);
 
 	/* Release the PORT that this driver is using */
-	IRDA_DEBUG(0 , "%s(), Releasing Region %03x\n", 
-	      __func__ , self->io.fir_base);
+	pr_debug("%s(), Releasing Region %03x\n",
+		 __func__ , self->io.fir_base);
 	release_region(self->io.fir_base, self->io.fir_ext);
 
 	if (self->tx_buff.head)
@@ -312,7 +304,6 @@
 	int i;
   	
  	for (i=0; i < 2; i++) {
-		IRDA_DEBUG( 0, "%s()\n", __func__ );
 #ifdef CONFIG_USE_W977_PNP
  		/* Enter PnP configuration mode */
 		w977_efm_enter(efbase[i]);
@@ -399,7 +390,7 @@
 			return 0;
 		} else {
 			/* Try next extented function register address */
-			IRDA_DEBUG( 0, "%s(), Wrong chip version", __func__ );
+			pr_debug("%s(), Wrong chip version", __func__);
 		}
   	}   	
 	return -1;
@@ -435,19 +426,19 @@
 	case 115200: outb(0x01, iobase+ABLL); break;
 	case 576000:
 		ir_mode = HCR_MIR_576;
-		IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__ );
+		pr_debug("%s(), handling baud of 576000\n", __func__);
 		break;
 	case 1152000:
 		ir_mode = HCR_MIR_1152;
-		IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__ );
+		pr_debug("%s(), handling baud of 1152000\n", __func__);
 		break;
 	case 4000000:
 		ir_mode = HCR_FIR;
-		IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__ );
+		pr_debug("%s(), handling baud of 4000000\n", __func__);
 		break;
 	default:
 		ir_mode = HCR_FIR;
-		IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __func__ , speed);
+		pr_debug("%s(), unknown baud rate of %d\n", __func__ , speed);
 		break;
 	}
 
@@ -498,8 +489,8 @@
 
 	iobase = self->io.fir_base;
 
-	IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __func__ , jiffies,
-		   (int) skb->len);
+	pr_debug("%s(%ld), skb->len=%d\n", __func__ , jiffies,
+		 (int)skb->len);
 	
 	/* Lock transmit buffer */
 	netif_stop_queue(dev);
@@ -526,7 +517,7 @@
 		self->tx_buff.len = skb->len;
 		
 		mtt = irda_get_mtt(skb);
-			IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __func__ , jiffies, mtt);
+		pr_debug("%s(%ld), mtt=%d\n", __func__ , jiffies, mtt);
 			if (mtt)
 				udelay(mtt);
 
@@ -560,7 +551,7 @@
 static void w83977af_dma_write(struct w83977af_ir *self, int iobase)
 {
 	__u8 set;
-        IRDA_DEBUG(4, "%s(), len=%d\n", __func__ , self->tx_buff.len);
+	pr_debug("%s(), len=%d\n", __func__ , self->tx_buff.len);
 
 	/* Save current set */
 	set = inb(iobase+SSR);
@@ -595,19 +586,16 @@
 	int actual = 0;
 	__u8 set;
 	
-	IRDA_DEBUG(4, "%s()\n", __func__ );
-
 	/* Save current bank */
 	set = inb(iobase+SSR);
 
 	switch_bank(iobase, SET0);
 	if (!(inb_p(iobase+USR) & USR_TSRE)) {
-		IRDA_DEBUG(4,
-			   "%s(), warning, FIFO not empty yet!\n", __func__  );
+		pr_debug("%s(), warning, FIFO not empty yet!\n", __func__);
 
 		fifo_size -= 17;
-		IRDA_DEBUG(4, "%s(), %d bytes left in tx fifo\n", 
-			   __func__ , fifo_size);
+		pr_debug("%s(), %d bytes left in tx fifo\n",
+			 __func__ , fifo_size);
 	}
 
 	/* Fill FIFO with current frame */
@@ -616,8 +604,8 @@
 		outb(buf[actual++], iobase+TBR);
 	}
         
-	IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", 
-		   __func__ , fifo_size, actual, len);
+	pr_debug("%s(), fifo_size %d ; %d sent of %d\n",
+		 __func__ , fifo_size, actual, len);
 
 	/* Restore bank */
 	outb(set, iobase+SSR);
@@ -637,7 +625,7 @@
 	int iobase;
 	__u8 set;
 
-	IRDA_DEBUG(4, "%s(%ld)\n", __func__ , jiffies);
+	pr_debug("%s(%ld)\n", __func__ , jiffies);
 
 	IRDA_ASSERT(self != NULL, return;);
 
@@ -652,7 +640,7 @@
 	
 	/* Check for underrun! */
 	if (inb(iobase+AUDR) & AUDR_UNDR) {
-		IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __func__ );
+		pr_debug("%s(), Transmit underrun!\n", __func__);
 		
 		self->netdev->stats.tx_errors++;
 		self->netdev->stats.tx_fifo_errors++;
@@ -693,7 +681,7 @@
 #endif
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(4, "%s\n", __func__ );
+	pr_debug("%s\n", __func__);
 
 	iobase= self->io.fir_base;
 
@@ -764,7 +752,7 @@
 	__u8 set;
 	__u8 status;
 
-	IRDA_DEBUG(4, "%s\n", __func__ );
+	pr_debug("%s\n", __func__);
 
 	st_fifo = &self->st_fifo;
 
@@ -881,8 +869,6 @@
 	__u8 byte = 0x00;
 	int iobase;
 
-	IRDA_DEBUG(4, "%s()\n", __func__ );
-
 	IRDA_ASSERT(self != NULL, return;);
 	
 	iobase = self->io.fir_base;
@@ -908,7 +894,7 @@
 	__u8 set;
 	int iobase;
 
-	IRDA_DEBUG(4, "%s(), isr=%#x\n", __func__ , isr);
+	pr_debug("%s(), isr=%#x\n", __func__ , isr);
 	
 	iobase = self->io.fir_base;
 	/* Transmit FIFO low on data */
@@ -944,8 +930,7 @@
 	if (isr & ISR_TXEMP_I) {		
 		/* Check if we need to change the speed? */
 		if (self->new_speed) {
-			IRDA_DEBUG(2,
-				   "%s(), Changing speed!\n", __func__ );
+			pr_debug("%s(), Changing speed!\n", __func__);
 			w83977af_change_speed(self, self->new_speed);
 			self->new_speed = 0;
 		}
@@ -1127,7 +1112,6 @@
 	char hwname[32];
 	__u8 set;
 	
-	IRDA_DEBUG(0, "%s()\n", __func__ );
 	
 	IRDA_ASSERT(dev != NULL, return -1;);
 	self = netdev_priv(dev);
@@ -1190,8 +1174,6 @@
 	int iobase;
 	__u8 set;
 
-	IRDA_DEBUG(0, "%s()\n", __func__ );
-
 	IRDA_ASSERT(dev != NULL, return -1;);
 	
 	self = netdev_priv(dev);
@@ -1245,7 +1227,7 @@
 
 	IRDA_ASSERT(self != NULL, return -1;);
 
-	IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
+	pr_debug("%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
 	
 	spin_lock_irqsave(&self->lock, flags);