| /* |
| * xHCI host controller driver |
| * |
| * Copyright (C) 2008 Intel Corp. |
| * |
| * Author: Sarah Sharp |
| * Some code borrowed from the Linux EHCI driver. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #ifndef __LINUX_XHCI_HCD_H |
| #define __LINUX_XHCI_HCD_H |
| |
| #include <linux/usb.h> |
| #include <linux/timer.h> |
| #include <linux/kernel.h> |
| #include <linux/usb/hcd.h> |
| |
| /* Code sharing between pci-quirks and xhci hcd */ |
| #include "xhci-ext-caps.h" |
| #include "pci-quirks.h" |
| |
| /* xHCI PCI Configuration Registers */ |
| #define XHCI_SBRN_OFFSET (0x60) |
| |
| /* Max number of USB devices for any host controller - limit in section 6.1 */ |
| #define MAX_HC_SLOTS 256 |
| /* Section 5.3.3 - MaxPorts */ |
| #define MAX_HC_PORTS 127 |
| |
| /* |
| * xHCI register interface. |
| * This corresponds to the eXtensible Host Controller Interface (xHCI) |
| * Revision 0.95 specification |
| */ |
| |
| /** |
| * struct xhci_cap_regs - xHCI Host Controller Capability Registers. |
| * @hc_capbase: length of the capabilities register and HC version number |
| * @hcs_params1: HCSPARAMS1 - Structural Parameters 1 |
| * @hcs_params2: HCSPARAMS2 - Structural Parameters 2 |
| * @hcs_params3: HCSPARAMS3 - Structural Parameters 3 |
| * @hcc_params: HCCPARAMS - Capability Parameters |
| * @db_off: DBOFF - Doorbell array offset |
| * @run_regs_off: RTSOFF - Runtime register space offset |
| */ |
| struct xhci_cap_regs { |
| __le32 hc_capbase; |
| __le32 hcs_params1; |
| __le32 hcs_params2; |
| __le32 hcs_params3; |
| __le32 hcc_params; |
| __le32 db_off; |
| __le32 run_regs_off; |
| /* Reserved up to (CAPLENGTH - 0x1C) */ |
| }; |
| |
| /* hc_capbase bitmasks */ |
| /* bits 7:0 - how long is the Capabilities register */ |
| #define HC_LENGTH(p) XHCI_HC_LENGTH(p) |
| /* bits 31:16 */ |
| #define HC_VERSION(p) (((p) >> 16) & 0xffff) |
| |
| /* HCSPARAMS1 - hcs_params1 - bitmasks */ |
| /* bits 0:7, Max Device Slots */ |
| #define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff) |
| #define HCS_SLOTS_MASK 0xff |
| /* bits 8:18, Max Interrupters */ |
| #define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff) |
| /* bits 24:31, Max Ports - max value is 0x7F = 127 ports */ |
| #define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f) |
| |
| /* HCSPARAMS2 - hcs_params2 - bitmasks */ |
| /* bits 0:3, frames or uframes that SW needs to queue transactions |
| * ahead of the HW to meet periodic deadlines */ |
| #define HCS_IST(p) (((p) >> 0) & 0xf) |
| /* bits 4:7, max number of Event Ring segments */ |
| #define HCS_ERST_MAX(p) (((p) >> 4) & 0xf) |
| /* bit 26 Scratchpad restore - for save/restore HW state - not used yet */ |
| /* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */ |
| #define HCS_MAX_SCRATCHPAD(p) (((p) >> 27) & 0x1f) |
| |
| /* HCSPARAMS3 - hcs_params3 - bitmasks */ |
| /* bits 0:7, Max U1 to U0 latency for the roothub ports */ |
| #define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff) |
| /* bits 16:31, Max U2 to U0 latency for the roothub ports */ |
| #define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff) |
| |
| /* HCCPARAMS - hcc_params - bitmasks */ |
| /* true: HC can use 64-bit address pointers */ |
| #define HCC_64BIT_ADDR(p) ((p) & (1 << 0)) |
| /* true: HC can do bandwidth negotiation */ |
| #define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1)) |
| /* true: HC uses 64-byte Device Context structures |
| * FIXME 64-byte context structures aren't supported yet. |
| */ |
| #define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2)) |
| /* true: HC has port power switches */ |
| #define HCC_PPC(p) ((p) & (1 << 3)) |
| /* true: HC has port indicators */ |
| #define HCS_INDICATOR(p) ((p) & (1 << 4)) |
| /* true: HC has Light HC Reset Capability */ |
| #define HCC_LIGHT_RESET(p) ((p) & (1 << 5)) |
| /* true: HC supports latency tolerance messaging */ |
| #define HCC_LTC(p) ((p) & (1 << 6)) |
| /* true: no secondary Stream ID Support */ |
| #define HCC_NSS(p) ((p) & (1 << 7)) |
| /* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */ |
| #define HCC_MAX_PSA(p) (1 << ((((p) >> 12) & 0xf) + 1)) |
| /* Extended Capabilities pointer from PCI base - section 5.3.6 */ |
| #define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p) |
| |
| /* db_off bitmask - bits 0:1 reserved */ |
| #define DBOFF_MASK (~0x3) |
| |
| /* run_regs_off bitmask - bits 0:4 reserved */ |
| #define RTSOFF_MASK (~0x1f) |
| |
| |
| /* Number of registers per port */ |
| #define NUM_PORT_REGS 4 |
| |
| /** |
| * struct xhci_op_regs - xHCI Host Controller Operational Registers. |
| * @command: USBCMD - xHC command register |
| * @status: USBSTS - xHC status register |
| * @page_size: This indicates the page size that the host controller |
| * supports. If bit n is set, the HC supports a page size |
| * of 2^(n+12), up to a 128MB page size. |
| * 4K is the minimum page size. |
| * @cmd_ring: CRP - 64-bit Command Ring Pointer |
| * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer |
| * @config_reg: CONFIG - Configure Register |
| * @port_status_base: PORTSCn - base address for Port Status and Control |
| * Each port has a Port Status and Control register, |
| * followed by a Port Power Management Status and Control |
| * register, a Port Link Info register, and a reserved |
| * register. |
| * @port_power_base: PORTPMSCn - base address for |
| * Port Power Management Status and Control |
| * @port_link_base: PORTLIn - base address for Port Link Info (current |
| * Link PM state and control) for USB 2.1 and USB 3.0 |
| * devices. |
| */ |
| struct xhci_op_regs { |
| __le32 command; |
| __le32 status; |
| __le32 page_size; |
| __le32 reserved1; |
| __le32 reserved2; |
| __le32 dev_notification; |
| __le64 cmd_ring; |
| /* rsvd: offset 0x20-2F */ |
| __le32 reserved3[4]; |
| __le64 dcbaa_ptr; |
| __le32 config_reg; |
| /* rsvd: offset 0x3C-3FF */ |
| __le32 reserved4[241]; |
| /* port 1 registers, which serve as a base address for other ports */ |
| __le32 port_status_base; |
| __le32 port_power_base; |
| __le32 port_link_base; |
| __le32 reserved5; |
| /* registers for ports 2-255 */ |
| __le32 reserved6[NUM_PORT_REGS*254]; |
| }; |
| |
| /* USBCMD - USB command - command bitmasks */ |
| /* start/stop HC execution - do not write unless HC is halted*/ |
| #define CMD_RUN XHCI_CMD_RUN |
| /* Reset HC - resets internal HC state machine and all registers (except |
| * PCI config regs). HC does NOT drive a USB reset on the downstream ports. |
| * The xHCI driver must reinitialize the xHC after setting this bit. |
| */ |
| #define CMD_RESET (1 << 1) |
| /* Event Interrupt Enable - a '1' allows interrupts from the host controller */ |
| #define CMD_EIE XHCI_CMD_EIE |
| /* Host System Error Interrupt Enable - get out-of-band signal for HC errors */ |
| #define CMD_HSEIE XHCI_CMD_HSEIE |
| /* bits 4:6 are reserved (and should be preserved on writes). */ |
| /* light reset (port status stays unchanged) - reset completed when this is 0 */ |
| #define CMD_LRESET (1 << 7) |
| /* host controller save/restore state. */ |
| #define CMD_CSS (1 << 8) |
| #define CMD_CRS (1 << 9) |
| /* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */ |
| #define CMD_EWE XHCI_CMD_EWE |
| /* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root |
| * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off. |
| * '0' means the xHC can power it off if all ports are in the disconnect, |
| * disabled, or powered-off state. |
| */ |
| #define CMD_PM_INDEX (1 << 11) |
| /* bits 12:31 are reserved (and should be preserved on writes). */ |
| |
| /* USBSTS - USB status - status bitmasks */ |
| /* HC not running - set to 1 when run/stop bit is cleared. */ |
| #define STS_HALT XHCI_STS_HALT |
| /* serious error, e.g. PCI parity error. The HC will clear the run/stop bit. */ |
| #define STS_FATAL (1 << 2) |
| /* event interrupt - clear this prior to clearing any IP flags in IR set*/ |
| #define STS_EINT (1 << 3) |
| /* port change detect */ |
| #define STS_PORT (1 << 4) |
| /* bits 5:7 reserved and zeroed */ |
| /* save state status - '1' means xHC is saving state */ |
| #define STS_SAVE (1 << 8) |
| /* restore state status - '1' means xHC is restoring state */ |
| #define STS_RESTORE (1 << 9) |
| /* true: save or restore error */ |
| #define STS_SRE (1 << 10) |
| /* true: Controller Not Ready to accept doorbell or op reg writes after reset */ |
| #define STS_CNR XHCI_STS_CNR |
| /* true: internal Host Controller Error - SW needs to reset and reinitialize */ |
| #define STS_HCE (1 << 12) |
| /* bits 13:31 reserved and should be preserved */ |
| |
| /* |
| * DNCTRL - Device Notification Control Register - dev_notification bitmasks |
| * Generate a device notification event when the HC sees a transaction with a |
| * notification type that matches a bit set in this bit field. |
| */ |
| #define DEV_NOTE_MASK (0xffff) |
| #define ENABLE_DEV_NOTE(x) (1 << (x)) |
| /* Most of the device notification types should only be used for debug. |
| * SW does need to pay attention to function wake notifications. |
| */ |
| #define DEV_NOTE_FWAKE ENABLE_DEV_NOTE(1) |
| |
| /* CRCR - Command Ring Control Register - cmd_ring bitmasks */ |
| /* bit 0 is the command ring cycle state */ |
| /* stop ring operation after completion of the currently executing command */ |
| #define CMD_RING_PAUSE (1 << 1) |
| /* stop ring immediately - abort the currently executing command */ |
| #define CMD_RING_ABORT (1 << 2) |
| /* true: command ring is running */ |
| #define CMD_RING_RUNNING (1 << 3) |
| /* bits 4:5 reserved and should be preserved */ |
| /* Command Ring pointer - bit mask for the lower 32 bits. */ |
| #define CMD_RING_RSVD_BITS (0x3f) |
| |
| /* CONFIG - Configure Register - config_reg bitmasks */ |
| /* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */ |
| #define MAX_DEVS(p) ((p) & 0xff) |
| /* bits 8:31 - reserved and should be preserved */ |
| |
| /* PORTSC - Port Status and Control Register - port_status_base bitmasks */ |
| /* true: device connected */ |
| #define PORT_CONNECT (1 << 0) |
| /* true: port enabled */ |
| #define PORT_PE (1 << 1) |
| /* bit 2 reserved and zeroed */ |
| /* true: port has an over-current condition */ |
| #define PORT_OC (1 << 3) |
| /* true: port reset signaling asserted */ |
| #define PORT_RESET (1 << 4) |
| /* Port Link State - bits 5:8 |
| * A read gives the current link PM state of the port, |
| * a write with Link State Write Strobe set sets the link state. |
| */ |
| #define PORT_PLS_MASK (0xf << 5) |
| #define XDEV_U0 (0x0 << 5) |
| #define XDEV_U2 (0x2 << 5) |
| #define XDEV_U3 (0x3 << 5) |
| #define XDEV_RESUME (0xf << 5) |
| /* true: port has power (see HCC_PPC) */ |
| #define PORT_POWER (1 << 9) |
| /* bits 10:13 indicate device speed: |
| * 0 - undefined speed - port hasn't be initialized by a reset yet |
| * 1 - full speed |
| * 2 - low speed |
| * 3 - high speed |
| * 4 - super speed |
| * 5-15 reserved |
| */ |
| #define DEV_SPEED_MASK (0xf << 10) |
| #define XDEV_FS (0x1 << 10) |
| #define XDEV_LS (0x2 << 10) |
| #define XDEV_HS (0x3 << 10) |
| #define XDEV_SS (0x4 << 10) |
| #define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10)) |
| #define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS) |
| #define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS) |
| #define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS) |
| #define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS) |
| /* Bits 20:23 in the Slot Context are the speed for the device */ |
| #define SLOT_SPEED_FS (XDEV_FS << 10) |
| #define SLOT_SPEED_LS (XDEV_LS << 10) |
| #define SLOT_SPEED_HS (XDEV_HS << 10) |
| #define SLOT_SPEED_SS (XDEV_SS << 10) |
| /* Port Indicator Control */ |
| #define PORT_LED_OFF (0 << 14) |
| #define PORT_LED_AMBER (1 << 14) |
| #define PORT_LED_GREEN (2 << 14) |
| #define PORT_LED_MASK (3 << 14) |
| /* Port Link State Write Strobe - set this when changing link state */ |
| #define PORT_LINK_STROBE (1 << 16) |
| /* true: connect status change */ |
| #define PORT_CSC (1 << 17) |
| /* true: port enable change */ |
| #define PORT_PEC (1 << 18) |
| /* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port |
| * into an enabled state, and the device into the default state. A "warm" reset |
| * also resets the link, forcing the device through the link training sequence. |
| * SW can also look at the Port Reset register to see when warm reset is done. |
| */ |
| #define PORT_WRC (1 << 19) |
| /* true: over-current change */ |
| #define PORT_OCC (1 << 20) |
| /* true: reset change - 1 to 0 transition of PORT_RESET */ |
| #define PORT_RC (1 << 21) |
| /* port link status change - set on some port link state transitions: |
| * Transition Reason |
| * ------------------------------------------------------------------------------ |
| * - U3 to Resume Wakeup signaling from a device |
| * - Resume to Recovery to U0 USB 3.0 device resume |
| * - Resume to U0 USB 2.0 device resume |
| * - U3 to Recovery to U0 Software resume of USB 3.0 device complete |
| * - U3 to U0 Software resume of USB 2.0 device complete |
| * - U2 to U0 L1 resume of USB 2.1 device complete |
| * - U0 to U0 (???) L1 entry rejection by USB 2.1 device |
| * - U0 to disabled L1 entry error with USB 2.1 device |
| * - Any state to inactive Error on USB 3.0 port |
| */ |
| #define PORT_PLC (1 << 22) |
| /* port configure error change - port failed to configure its link partner */ |
| #define PORT_CEC (1 << 23) |
| /* bit 24 reserved */ |
| /* wake on connect (enable) */ |
| #define PORT_WKCONN_E (1 << 25) |
| /* wake on disconnect (enable) */ |
| #define PORT_WKDISC_E (1 << 26) |
| /* wake on over-current (enable) */ |
| #define PORT_WKOC_E (1 << 27) |
| /* bits 28:29 reserved */ |
| /* true: device is removable - for USB 3.0 roothub emulation */ |
| #define PORT_DEV_REMOVE (1 << 30) |
| /* Initiate a warm port reset - complete when PORT_WRC is '1' */ |
| #define PORT_WR (1 << 31) |
| |
| /* We mark duplicate entries with -1 */ |
| #define DUPLICATE_ENTRY ((u8)(-1)) |
| |
| /* Port Power Management Status and Control - port_power_base bitmasks */ |
| /* Inactivity timer value for transitions into U1, in microseconds. |
| * Timeout can be up to 127us. 0xFF means an infinite timeout. |
| */ |
| #define PORT_U1_TIMEOUT(p) ((p) & 0xff) |
| /* Inactivity timer value for transitions into U2 */ |
| #define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8) |
| /* Bits 24:31 for port testing */ |
| |
| /* USB2 Protocol PORTSPMSC */ |
| #define PORT_L1S_MASK 7 |
| #define PORT_L1S_SUCCESS 1 |
| #define PORT_RWE (1 << 3) |
| #define PORT_HIRD(p) (((p) & 0xf) << 4) |
| #define PORT_L1DS(p) (((p) & 0xff) << 8) |
| |
| /** |
| * struct xhci_intr_reg - Interrupt Register Set |
| * @irq_pending: IMAN - Interrupt Management Register. Used to enable |
| * interrupts and check for pending interrupts. |
| * @irq_control: IMOD - Interrupt Moderation Register. |
| * Used to throttle interrupts. |
| * @erst_size: Number of segments in the Event Ring Segment Table (ERST). |
| * @erst_base: ERST base address. |
| * @erst_dequeue: Event ring dequeue pointer. |
| * |
| * Each interrupter (defined by a MSI-X vector) has an event ring and an Event |
| * Ring Segment Table (ERST) associated with it. The event ring is comprised of |
| * multiple segments of the same size. The HC places events on the ring and |
| * "updates the Cycle bit in the TRBs to indicate to software the current |
| * position of the Enqueue Pointer." The HCD (Linux) processes those events and |
| * updates the dequeue pointer. |
| */ |
| struct xhci_intr_reg { |
| __le32 irq_pending; |
| __le32 irq_control; |
| __le32 erst_size; |
| __le32 rsvd; |
| __le64 erst_base; |
| __le64 erst_dequeue; |
| }; |
| |
| /* irq_pending bitmasks */ |
| #define ER_IRQ_PENDING(p) ((p) & 0x1) |
| /* bits 2:31 need to be preserved */ |
| /* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */ |
| #define ER_IRQ_CLEAR(p) ((p) & 0xfffffffe) |
| #define ER_IRQ_ENABLE(p) ((ER_IRQ_CLEAR(p)) | 0x2) |
| #define ER_IRQ_DISABLE(p) ((ER_IRQ_CLEAR(p)) & ~(0x2)) |
| |
| /* irq_control bitmasks */ |
| /* Minimum interval between interrupts (in 250ns intervals). The interval |
| * between interrupts will be longer if there are no events on the event ring. |
| * Default is 4000 (1 ms). |
| */ |
| #define ER_IRQ_INTERVAL_MASK (0xffff) |
| /* Counter used to count down the time to the next interrupt - HW use only */ |
| #define ER_IRQ_COUNTER_MASK (0xffff << 16) |
| |
| /* erst_size bitmasks */ |
| /* Preserve bits 16:31 of erst_size */ |
| #define ERST_SIZE_MASK (0xffff << 16) |
| |
| /* erst_dequeue bitmasks */ |
| /* Dequeue ERST Segment Index (DESI) - Segment number (or alias) |
| * where the current dequeue pointer lies. This is an optional HW hint. |
| */ |
| #define ERST_DESI_MASK (0x7) |
| /* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by |
| * a work queue (or delayed service routine)? |
| */ |
| #define ERST_EHB (1 << 3) |
| #define ERST_PTR_MASK (0xf) |
| |
| /** |
| * struct xhci_run_regs |
| * @microframe_index: |
| * MFINDEX - current microframe number |
| * |
| * Section 5.5 Host Controller Runtime Registers: |
| * "Software should read and write these registers using only Dword (32 bit) |
| * or larger accesses" |
| */ |
| struct xhci_run_regs { |
| __le32 microframe_index; |
| __le32 rsvd[7]; |
| struct xhci_intr_reg ir_set[128]; |
| }; |
| |
| /** |
| * struct doorbell_array |
| * |
| * Bits 0 - 7: Endpoint target |
| * Bits 8 - 15: RsvdZ |
| * Bits 16 - 31: Stream ID |
| * |
| * Section 5.6 |
| */ |
| struct xhci_doorbell_array { |
| __le32 doorbell[256]; |
| }; |
| |
| #define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16)) |
| #define DB_VALUE_HOST 0x00000000 |
| |
| /** |
| * struct xhci_protocol_caps |
| * @revision: major revision, minor revision, capability ID, |
| * and next capability pointer. |
| * @name_string: Four ASCII characters to say which spec this xHC |
| * follows, typically "USB ". |
| * @port_info: Port offset, count, and protocol-defined information. |
| */ |
| struct xhci_protocol_caps { |
| u32 revision; |
| u32 name_string; |
| u32 port_info; |
| }; |
| |
| #define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) |
| #define XHCI_EXT_PORT_OFF(x) ((x) & 0xff) |
| #define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) |
| |
| /** |
| * struct xhci_container_ctx |
| * @type: Type of context. Used to calculated offsets to contained contexts. |
| * @size: Size of the context data |
| * @bytes: The raw context data given to HW |
| * @dma: dma address of the bytes |
| * |
| * Represents either a Device or Input context. Holds a pointer to the raw |
| * memory used for the context (bytes) and dma address of it (dma). |
| */ |
| struct xhci_container_ctx { |
| unsigned type; |
| #define XHCI_CTX_TYPE_DEVICE 0x1 |
| #define XHCI_CTX_TYPE_INPUT 0x2 |
| |
| int size; |
| |
| u8 *bytes; |
| dma_addr_t dma; |
| }; |
| |
| /** |
| * struct xhci_slot_ctx |
| * @dev_info: Route string, device speed, hub info, and last valid endpoint |
| * @dev_info2: Max exit latency for device number, root hub port number |
| * @tt_info: tt_info is used to construct split transaction tokens |
| * @dev_state: slot state and device address |
| * |
| * Slot Context - section 6.2.1.1. This assumes the HC uses 32-byte context |
| * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes |
| * reserved at the end of the slot context for HC internal use. |
| */ |
| struct xhci_slot_ctx { |
| __le32 dev_info; |
| __le32 dev_info2; |
| __le32 tt_info; |
| __le32 dev_state; |
| /* offset 0x10 to 0x1f reserved for HC internal use */ |
| __le32 reserved[4]; |
| }; |
| |
| /* dev_info bitmasks */ |
| /* Route String - 0:19 */ |
| #define ROUTE_STRING_MASK (0xfffff) |
| /* Device speed - values defined by PORTSC Device Speed field - 20:23 */ |
| #define DEV_SPEED (0xf << 20) |
| /* bit 24 reserved */ |
| /* Is this LS/FS device connected through a HS hub? - bit 25 */ |
| #define DEV_MTT (0x1 << 25) |
| /* Set if the device is a hub - bit 26 */ |
| #define DEV_HUB (0x1 << 26) |
| /* Index of the last valid endpoint context in this device context - 27:31 */ |
| #define LAST_CTX_MASK (0x1f << 27) |
| #define LAST_CTX(p) ((p) << 27) |
| #define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1) |
| #define SLOT_FLAG (1 << 0) |
| #define EP0_FLAG (1 << 1) |
| |
| /* dev_info2 bitmasks */ |
| /* Max Exit Latency (ms) - worst case time to wake up all links in dev path */ |
| #define MAX_EXIT (0xffff) |
| /* Root hub port number that is needed to access the USB device */ |
| #define ROOT_HUB_PORT(p) (((p) & 0xff) << 16) |
| #define DEVINFO_TO_ROOT_HUB_PORT(p) (((p) >> 16) & 0xff) |
| /* Maximum number of ports under a hub device */ |
| #define XHCI_MAX_PORTS(p) (((p) & 0xff) << 24) |
| |
| /* tt_info bitmasks */ |
| /* |
| * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub |
| * The Slot ID of the hub that isolates the high speed signaling from |
| * this low or full-speed device. '0' if attached to root hub port. |
| */ |
| #define TT_SLOT (0xff) |
| /* |
| * The number of the downstream facing port of the high-speed hub |
| * '0' if the device is not low or full speed. |
| */ |
| #define TT_PORT (0xff << 8) |
| #define TT_THINK_TIME(p) (((p) & 0x3) << 16) |
| |
| /* dev_state bitmasks */ |
| /* USB device address - assigned by the HC */ |
| #define DEV_ADDR_MASK (0xff) |
| /* bits 8:26 reserved */ |
| /* Slot state */ |
| #define SLOT_STATE (0x1f << 27) |
| #define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27) |
| |
| #define SLOT_STATE_DISABLED 0 |
| #define SLOT_STATE_ENABLED SLOT_STATE_DISABLED |
| #define SLOT_STATE_DEFAULT 1 |
| #define SLOT_STATE_ADDRESSED 2 |
| #define SLOT_STATE_CONFIGURED 3 |
| |
| /** |
| * struct xhci_ep_ctx |
| * @ep_info: endpoint state, streams, mult, and interval information. |
| * @ep_info2: information on endpoint type, max packet size, max burst size, |
| * error count, and whether the HC will force an event for all |
| * transactions. |
| * @deq: 64-bit ring dequeue pointer address. If the endpoint only |
| * defines one stream, this points to the endpoint transfer ring. |
| * Otherwise, it points to a stream context array, which has a |
| * ring pointer for each flow. |
| * @tx_info: |
| * Average TRB lengths for the endpoint ring and |
| * max payload within an Endpoint Service Interval Time (ESIT). |
| * |
| * Endpoint Context - section 6.2.1.2. This assumes the HC uses 32-byte context |
| * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes |
| * reserved at the end of the endpoint context for HC internal use. |
| */ |
| struct xhci_ep_ctx { |
| __le32 ep_info; |
| __le32 ep_info2; |
| __le64 deq; |
| __le32 tx_info; |
| /* offset 0x14 - 0x1f reserved for HC internal use */ |
| __le32 reserved[3]; |
| }; |
| |
| /* ep_info bitmasks */ |
| /* |
| * Endpoint State - bits 0:2 |
| * 0 - disabled |
| * 1 - running |
| * 2 - halted due to halt condition - ok to manipulate endpoint ring |
| * 3 - stopped |
| * 4 - TRB error |
| * 5-7 - reserved |
| */ |
| #define EP_STATE_MASK (0xf) |
| #define EP_STATE_DISABLED 0 |
| #define EP_STATE_RUNNING 1 |
| #define EP_STATE_HALTED 2 |
| #define EP_STATE_STOPPED 3 |
| #define EP_STATE_ERROR 4 |
| /* Mult - Max number of burtst within an interval, in EP companion desc. */ |
| #define EP_MULT(p) (((p) & 0x3) << 8) |
| #define CTX_TO_EP_MULT(p) (((p) >> 8) & 0x3) |
| /* bits 10:14 are Max Primary Streams */ |
| /* bit 15 is Linear Stream Array */ |
| /* Interval - period between requests to an endpoint - 125u increments. */ |
| #define EP_INTERVAL(p) (((p) & 0xff) << 16) |
| #define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff)) |
| #define CTX_TO_EP_INTERVAL(p) (((p) >> 16) & 0xff) |
| #define EP_MAXPSTREAMS_MASK (0x1f << 10) |
| #define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK) |
| /* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */ |
| #define EP_HAS_LSA (1 << 15) |
| |
| /* ep_info2 bitmasks */ |
| /* |
| * Force Event - generate transfer events for all TRBs for this endpoint |
| * This will tell the HC to ignore the IOC and ISP flags (for debugging only). |
| */ |
| #define FORCE_EVENT (0x1) |
| #define ERROR_COUNT(p) (((p) & 0x3) << 1) |
| #define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7) |
| #define EP_TYPE(p) ((p) << 3) |
| #define ISOC_OUT_EP 1 |
| #define BULK_OUT_EP 2 |
| #define INT_OUT_EP 3 |
| #define CTRL_EP 4 |
| #define ISOC_IN_EP 5 |
| #define BULK_IN_EP 6 |
| #define INT_IN_EP 7 |
| /* bit 6 reserved */ |
| /* bit 7 is Host Initiate Disable - for disabling stream selection */ |
| #define MAX_BURST(p) (((p)&0xff) << 8) |
| #define CTX_TO_MAX_BURST(p) (((p) >> 8) & 0xff) |
| #define MAX_PACKET(p) (((p)&0xffff) << 16) |
| #define MAX_PACKET_MASK (0xffff << 16) |
| #define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff) |
| |
| /* Get max packet size from ep desc. Bit 10..0 specify the max packet size. |
| * USB2.0 spec 9.6.6. |
| */ |
| #define GET_MAX_PACKET(p) ((p) & 0x7ff) |
| |
| /* tx_info bitmasks */ |
| #define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff) |
| #define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16) |
| #define CTX_TO_MAX_ESIT_PAYLOAD(p) (((p) >> 16) & 0xffff) |
| |
| /* deq bitmasks */ |
| #define EP_CTX_CYCLE_MASK (1 << 0) |
| |
| |
| /** |
| * struct xhci_input_control_context |
| * Input control context; see section 6.2.5. |
| * |
| * @drop_context: set the bit of the endpoint context you want to disable |
| * @add_context: set the bit of the endpoint context you want to enable |
| */ |
| struct xhci_input_control_ctx { |
| __le32 drop_flags; |
| __le32 add_flags; |
| __le32 rsvd2[6]; |
| }; |
| |
| #define EP_IS_ADDED(ctrl_ctx, i) \ |
| (le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1))) |
| #define EP_IS_DROPPED(ctrl_ctx, i) \ |
| (le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) |
| |
| /* Represents everything that is needed to issue a command on the command ring. |
| * It's useful to pre-allocate these for commands that cannot fail due to |
| * out-of-memory errors, like freeing streams. |
| */ |
| struct xhci_command { |
| /* Input context for changing device state */ |
| struct xhci_container_ctx *in_ctx; |
| u32 status; |
| /* If completion is null, no one is waiting on this command |
| * and the structure can be freed after the command completes. |
| */ |
| struct completion *completion; |
| union xhci_trb *command_trb; |
| struct list_head cmd_list; |
| }; |
| |
| /* drop context bitmasks */ |
| #define DROP_EP(x) (0x1 << x) |
| /* add context bitmasks */ |
| #define ADD_EP(x) (0x1 << x) |
| |
| struct xhci_stream_ctx { |
| /* 64-bit stream ring address, cycle state, and stream type */ |
| __le64 stream_ring; |
| /* offset 0x14 - 0x1f reserved for HC internal use */ |
| __le32 reserved[2]; |
| }; |
| |
| /* Stream Context Types (section 6.4.1) - bits 3:1 of stream ctx deq ptr */ |
| #define SCT_FOR_CTX(p) (((p) << 1) & 0x7) |
| /* Secondary stream array type, dequeue pointer is to a transfer ring */ |
| #define SCT_SEC_TR 0 |
| /* Primary stream array type, dequeue pointer is to a transfer ring */ |
| #define SCT_PRI_TR 1 |
| /* Dequeue pointer is for a secondary stream array (SSA) with 8 entries */ |
| #define SCT_SSA_8 2 |
| #define SCT_SSA_16 3 |
| #define SCT_SSA_32 4 |
| #define SCT_SSA_64 5 |
| #define SCT_SSA_128 6 |
| #define SCT_SSA_256 7 |
| |
| /* Assume no secondary streams for now */ |
| struct xhci_stream_info { |
| struct xhci_ring **stream_rings; |
| /* Number of streams, including stream 0 (which drivers can't use) */ |
| unsigned int num_streams; |
| /* The stream context array may be bigger than |
| * the number of streams the driver asked for |
| */ |
| struct xhci_stream_ctx *stream_ctx_array; |
| unsigned int num_stream_ctxs; |
| dma_addr_t ctx_array_dma; |
| /* For mapping physical TRB addresses to segments in stream rings */ |
| struct radix_tree_root trb_address_map; |
| struct xhci_command *free_streams_command; |
| }; |
| |
| #define SMALL_STREAM_ARRAY_SIZE 256 |
| #define MEDIUM_STREAM_ARRAY_SIZE 1024 |
| |
| /* Some Intel xHCI host controllers need software to keep track of the bus |
| * bandwidth. Keep track of endpoint info here. Each root port is allocated |
| * the full bus bandwidth. We must also treat TTs (including each port under a |
| * multi-TT hub) as a separate bandwidth domain. The direct memory interface |
| * (DMI) also limits the total bandwidth (across all domains) that can be used. |
| */ |
| struct xhci_bw_info { |
| /* ep_interval is zero-based */ |
| unsigned int ep_interval; |
| /* mult and num_packets are one-based */ |
| unsigned int mult; |
| unsigned int num_packets; |
| unsigned int max_packet_size; |
| unsigned int max_esit_payload; |
| unsigned int type; |
| }; |
| |
| /* "Block" sizes in bytes the hardware uses for different device speeds. |
| * The logic in this part of the hardware limits the number of bits the hardware |
| * can use, so must represent bandwidth in a less precise manner to mimic what |
| * the scheduler hardware computes. |
| */ |
| #define FS_BLOCK 1 |
| #define HS_BLOCK 4 |
| #define SS_BLOCK 16 |
| #define DMI_BLOCK 32 |
| |
| /* Each device speed has a protocol overhead (CRC, bit stuffing, etc) associated |
| * with each byte transferred. SuperSpeed devices have an initial overhead to |
| * set up bursts. These are in blocks, see above. LS overhead has already been |
| * translated into FS blocks. |
| */ |
| #define DMI_OVERHEAD 8 |
| #define DMI_OVERHEAD_BURST 4 |
| #define SS_OVERHEAD 8 |
| #define SS_OVERHEAD_BURST 32 |
| #define HS_OVERHEAD 26 |
| #define FS_OVERHEAD 20 |
| #define LS_OVERHEAD 128 |
| /* The TTs need to claim roughly twice as much bandwidth (94 bytes per |
| * microframe ~= 24Mbps) of the HS bus as the devices can actually use because |
| * of overhead associated with split transfers crossing microframe boundaries. |
| * 31 blocks is pure protocol overhead. |
| */ |
| #define TT_HS_OVERHEAD (31 + 94) |
| #define TT_DMI_OVERHEAD (25 + 12) |
| |
| /* Bandwidth limits in blocks */ |
| #define FS_BW_LIMIT 1285 |
| #define TT_BW_LIMIT 1320 |
| #define HS_BW_LIMIT 1607 |
| #define SS_BW_LIMIT_IN 3906 |
| #define DMI_BW_LIMIT_IN 3906 |
| #define SS_BW_LIMIT_OUT 3906 |
| #define DMI_BW_LIMIT_OUT 3906 |
| |
| /* Percentage of bus bandwidth reserved for non-periodic transfers */ |
| #define FS_BW_RESERVED 10 |
| #define HS_BW_RESERVED 20 |
| #define SS_BW_RESERVED 10 |
| |
| struct xhci_virt_ep { |
| struct xhci_ring *ring; |
| /* Related to endpoints that are configured to use stream IDs only */ |
| struct xhci_stream_info *stream_info; |
| /* Temporary storage in case the configure endpoint command fails and we |
| * have to restore the device state to the previous state |
| */ |
| struct xhci_ring *new_ring; |
| unsigned int ep_state; |
| #define SET_DEQ_PENDING (1 << 0) |
| #define EP_HALTED (1 << 1) /* For stall handling */ |
| #define EP_HALT_PENDING (1 << 2) /* For URB cancellation */ |
| /* Transitioning the endpoint to using streams, don't enqueue URBs */ |
| #define EP_GETTING_STREAMS (1 << 3) |
| #define EP_HAS_STREAMS (1 << 4) |
| /* Transitioning the endpoint to not using streams, don't enqueue URBs */ |
| #define EP_GETTING_NO_STREAMS (1 << 5) |
| /* ---- Related to URB cancellation ---- */ |
| struct list_head cancelled_td_list; |
| /* The TRB that was last reported in a stopped endpoint ring */ |
| union xhci_trb *stopped_trb; |
| struct xhci_td *stopped_td; |
| unsigned int stopped_stream; |
| /* Watchdog timer for stop endpoint command to cancel URBs */ |
| struct timer_list stop_cmd_timer; |
| int stop_cmds_pending; |
| struct xhci_hcd *xhci; |
| /* Dequeue pointer and dequeue segment for a submitted Set TR Dequeue |
| * command. We'll need to update the ring's dequeue segment and dequeue |
| * pointer after the command completes. |
| */ |
| struct xhci_segment *queued_deq_seg; |
| union xhci_trb *queued_deq_ptr; |
| /* |
| * Sometimes the xHC can not process isochronous endpoint ring quickly |
| * enough, and it will miss some isoc tds on the ring and generate |
| * a Missed Service Error Event. |
| * Set skip flag when receive a Missed Service Error Event and |
| * process the missed tds on the endpoint ring. |
| */ |
| bool skip; |
| /* Bandwidth checking storage */ |
| struct xhci_bw_info bw_info; |
| struct list_head bw_endpoint_list; |
| }; |
| |
| enum xhci_overhead_type { |
| LS_OVERHEAD_TYPE = 0, |
| FS_OVERHEAD_TYPE, |
| HS_OVERHEAD_TYPE, |
| }; |
| |
| struct xhci_interval_bw { |
| unsigned int num_packets; |
| /* Sorted by max packet size. |
| * Head of the list is the greatest max packet size. |
| */ |
| struct list_head endpoints; |
| /* How many endpoints of each speed are present. */ |
| unsigned int overhead[3]; |
| }; |
| |
| #define XHCI_MAX_INTERVAL 16 |
| |
| struct xhci_interval_bw_table { |
| unsigned int interval0_esit_payload; |
| struct xhci_interval_bw interval_bw[XHCI_MAX_INTERVAL]; |
| /* Includes reserved bandwidth for async endpoints */ |
| unsigned int bw_used; |
| unsigned int ss_bw_in; |
| unsigned int ss_bw_out; |
| }; |
| |
| |
| struct xhci_virt_device { |
| struct usb_device *udev; |
| /* |
| * Commands to the hardware are passed an "input context" that |
| * tells the hardware what to change in its data structures. |
| * The hardware will return changes in an "output context" that |
| * software must allocate for the hardware. We need to keep |
| * track of input and output contexts separately because |
| * these commands might fail and we don't trust the hardware. |
| */ |
| struct xhci_container_ctx *out_ctx; |
| /* Used for addressing devices and configuration changes */ |
| struct xhci_container_ctx *in_ctx; |
| /* Rings saved to ensure old alt settings can be re-instated */ |
| struct xhci_ring **ring_cache; |
| int num_rings_cached; |
| /* Store xHC assigned device address */ |
| int address; |
| #define XHCI_MAX_RINGS_CACHED 31 |
| struct xhci_virt_ep eps[31]; |
| struct completion cmd_completion; |
| /* Status of the last command issued for this device */ |
| u32 cmd_status; |
| struct list_head cmd_list; |
| u8 fake_port; |
| u8 real_port; |
| struct xhci_interval_bw_table *bw_table; |
| struct xhci_tt_bw_info *tt_info; |
| }; |
| |
| /* |
| * For each roothub, keep track of the bandwidth information for each periodic |
| * interval. |
| * |
| * If a high speed hub is attached to the roothub, each TT associated with that |
| * hub is a separate bandwidth domain. The interval information for the |
| * endpoints on the devices under that TT will appear in the TT structure. |
| */ |
| struct xhci_root_port_bw_info { |
| struct list_head tts; |
| unsigned int num_active_tts; |
| struct xhci_interval_bw_table bw_table; |
| }; |
| |
| struct xhci_tt_bw_info { |
| struct list_head tt_list; |
| int slot_id; |
| int ttport; |
| struct xhci_interval_bw_table bw_table; |
| int active_eps; |
| }; |
| |
| |
| /** |
| * struct xhci_device_context_array |
| * @dev_context_ptr array of 64-bit DMA addresses for device contexts |
| */ |
| struct xhci_device_context_array { |
| /* 64-bit device addresses; we only write 32-bit addresses */ |
| __le64 dev_context_ptrs[MAX_HC_SLOTS]; |
| /* private xHCD pointers */ |
| dma_addr_t dma; |
| }; |
| /* TODO: write function to set the 64-bit device DMA address */ |
| /* |
| * TODO: change this to be dynamically sized at HC mem init time since the HC |
| * might not be able to handle the maximum number of devices possible. |
| */ |
| |
| |
| struct xhci_transfer_event { |
| /* 64-bit buffer address, or immediate data */ |
| __le64 buffer; |
| __le32 transfer_len; |
| /* This field is interpreted differently based on the type of TRB */ |
| __le32 flags; |
| }; |
| |
| /** Transfer Event bit fields **/ |
| #define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f) |
| |
| /* Completion Code - only applicable for some types of TRBs */ |
| #define COMP_CODE_MASK (0xff << 24) |
| #define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24) |
| #define COMP_SUCCESS 1 |
| /* Data Buffer Error */ |
| #define COMP_DB_ERR 2 |
| /* Babble Detected Error */ |
| #define COMP_BABBLE 3 |
| /* USB Transaction Error */ |
| #define COMP_TX_ERR 4 |
| /* TRB Error - some TRB field is invalid */ |
| #define COMP_TRB_ERR 5 |
| /* Stall Error - USB device is stalled */ |
| #define COMP_STALL 6 |
| /* Resource Error - HC doesn't have memory for that device configuration */ |
| #define COMP_ENOMEM 7 |
| /* Bandwidth Error - not enough room in schedule for this dev config */ |
| #define COMP_BW_ERR 8 |
| /* No Slots Available Error - HC ran out of device slots */ |
| #define COMP_ENOSLOTS 9 |
| /* Invalid Stream Type Error */ |
| #define COMP_STREAM_ERR 10 |
| /* Slot Not Enabled Error - doorbell rung for disabled device slot */ |
| #define COMP_EBADSLT 11 |
| /* Endpoint Not Enabled Error */ |
| #define COMP_EBADEP 12 |
| /* Short Packet */ |
| #define COMP_SHORT_TX 13 |
| /* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */ |
| #define COMP_UNDERRUN 14 |
| /* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */ |
| #define COMP_OVERRUN 15 |
| /* Virtual Function Event Ring Full Error */ |
| #define COMP_VF_FULL 16 |
| /* Parameter Error - Context parameter is invalid */ |
| #define COMP_EINVAL 17 |
| /* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */ |
| #define COMP_BW_OVER 18 |
| /* Context State Error - illegal context state transition requested */ |
| #define COMP_CTX_STATE 19 |
| /* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */ |
| #define COMP_PING_ERR 20 |
| /* Event Ring is full */ |
| #define COMP_ER_FULL 21 |
| /* Incompatible Device Error */ |
| #define COMP_DEV_ERR 22 |
| /* Missed Service Error - HC couldn't service an isoc ep within interval */ |
| #define COMP_MISSED_INT 23 |
| /* Successfully stopped command ring */ |
| #define COMP_CMD_STOP 24 |
| /* Successfully aborted current command and stopped command ring */ |
| #define COMP_CMD_ABORT 25 |
| /* Stopped - transfer was terminated by a stop endpoint command */ |
| #define COMP_STOP 26 |
| /* Same as COMP_EP_STOPPED, but the transferred length in the event is invalid */ |
| #define COMP_STOP_INVAL 27 |
| /* Control Abort Error - Debug Capability - control pipe aborted */ |
| #define COMP_DBG_ABORT 28 |
| /* Max Exit Latency Too Large Error */ |
| #define COMP_MEL_ERR 29 |
| /* TRB type 30 reserved */ |
| /* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */ |
| #define COMP_BUFF_OVER 31 |
| /* Event Lost Error - xHC has an "internal event overrun condition" */ |
| #define COMP_ISSUES 32 |
| /* Undefined Error - reported when other error codes don't apply */ |
| #define COMP_UNKNOWN 33 |
| /* Invalid Stream ID Error */ |
| #define COMP_STRID_ERR 34 |
| /* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */ |
| /* FIXME - check for this */ |
| #define COMP_2ND_BW_ERR 35 |
| /* Split Transaction Error */ |
| #define COMP_SPLIT_ERR 36 |
| |
| struct xhci_link_trb { |
| /* 64-bit segment pointer*/ |
| __le64 segment_ptr; |
| __le32 intr_target; |
| __le32 control; |
| }; |
| |
| /* control bitfields */ |
| #define LINK_TOGGLE (0x1<<1) |
| |
| /* Command completion event TRB */ |
| struct xhci_event_cmd { |
| /* Pointer to command TRB, or the value passed by the event data trb */ |
| __le64 cmd_trb; |
| __le32 status; |
| __le32 flags; |
| }; |
| |
| /* flags bitmasks */ |
| /* bits 16:23 are the virtual function ID */ |
| /* bits 24:31 are the slot ID */ |
| #define TRB_TO_SLOT_ID(p) (((p) & (0xff<<24)) >> 24) |
| #define SLOT_ID_FOR_TRB(p) (((p) & 0xff) << 24) |
| |
| /* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */ |
| #define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1) |
| #define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16) |
| |
| #define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23) |
| #define TRB_TO_SUSPEND_PORT(p) (((p) & (1 << 23)) >> 23) |
| #define LAST_EP_INDEX 30 |
| |
| /* Set TR Dequeue Pointer command TRB fields */ |
| #define TRB_TO_STREAM_ID(p) ((((p) & (0xffff << 16)) >> 16)) |
| #define STREAM_ID_FOR_TRB(p) ((((p)) & 0xffff) << 16) |
| |
| |
| /* Port Status Change Event TRB fields */ |
| /* Port ID - bits 31:24 */ |
| #define GET_PORT_ID(p) (((p) & (0xff << 24)) >> 24) |
| |
| /* Normal TRB fields */ |
| /* transfer_len bitmasks - bits 0:16 */ |
| #define TRB_LEN(p) ((p) & 0x1ffff) |
| /* Interrupter Target - which MSI-X vector to target the completion event at */ |
| #define TRB_INTR_TARGET(p) (((p) & 0x3ff) << 22) |
| #define GET_INTR_TARGET(p) (((p) >> 22) & 0x3ff) |
| #define TRB_TBC(p) (((p) & 0x3) << 7) |
| #define TRB_TLBPC(p) (((p) & 0xf) << 16) |
| |
| /* Cycle bit - indicates TRB ownership by HC or HCD */ |
| #define TRB_CYCLE (1<<0) |
| /* |
| * Force next event data TRB to be evaluated before task switch. |
| * Used to pass OS data back after a TD completes. |
| */ |
| #define TRB_ENT (1<<1) |
| /* Interrupt on short packet */ |
| #define TRB_ISP (1<<2) |
| /* Set PCIe no snoop attribute */ |
| #define TRB_NO_SNOOP (1<<3) |
| /* Chain multiple TRBs into a TD */ |
| #define TRB_CHAIN (1<<4) |
| /* Interrupt on completion */ |
| #define TRB_IOC (1<<5) |
| /* The buffer pointer contains immediate data */ |
| #define TRB_IDT (1<<6) |
| |
| /* Block Event Interrupt */ |
| #define TRB_BEI (1<<9) |
| |
| /* Control transfer TRB specific fields */ |
| #define TRB_DIR_IN (1<<16) |
| #define TRB_TX_TYPE(p) ((p) << 16) |
| #define TRB_DATA_OUT 2 |
| #define TRB_DATA_IN 3 |
| |
| /* Isochronous TRB specific fields */ |
| #define TRB_SIA (1<<31) |
| |
| struct xhci_generic_trb { |
| __le32 field[4]; |
| }; |
| |
| union xhci_trb { |
| struct xhci_link_trb link; |
| struct xhci_transfer_event trans_event; |
| struct xhci_event_cmd event_cmd; |
| struct xhci_generic_trb generic; |
| }; |
| |
| /* TRB bit mask */ |
| #define TRB_TYPE_BITMASK (0xfc00) |
| #define TRB_TYPE(p) ((p) << 10) |
| #define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10) |
| /* TRB type IDs */ |
| /* bulk, interrupt, isoc scatter/gather, and control data stage */ |
| #define TRB_NORMAL 1 |
| /* setup stage for control transfers */ |
| #define TRB_SETUP 2 |
| /* data stage for control transfers */ |
| #define TRB_DATA 3 |
| /* status stage for control transfers */ |
| #define TRB_STATUS 4 |
| /* isoc transfers */ |
| #define TRB_ISOC 5 |
| /* TRB for linking ring segments */ |
| #define TRB_LINK 6 |
| #define TRB_EVENT_DATA 7 |
| /* Transfer Ring No-op (not for the command ring) */ |
| #define TRB_TR_NOOP 8 |
| /* Command TRBs */ |
| /* Enable Slot Command */ |
| #define TRB_ENABLE_SLOT 9 |
| /* Disable Slot Command */ |
| #define TRB_DISABLE_SLOT 10 |
| /* Address Device Command */ |
| #define TRB_ADDR_DEV 11 |
| /* Configure Endpoint Command */ |
| #define TRB_CONFIG_EP 12 |
| /* Evaluate Context Command */ |
| #define TRB_EVAL_CONTEXT 13 |
| /* Reset Endpoint Command */ |
| #define TRB_RESET_EP 14 |
| /* Stop Transfer Ring Command */ |
| #define TRB_STOP_RING 15 |
| /* Set Transfer Ring Dequeue Pointer Command */ |
| #define TRB_SET_DEQ 16 |
| /* Reset Device Command */ |
| #define TRB_RESET_DEV 17 |
| /* Force Event Command (opt) */ |
| #define TRB_FORCE_EVENT 18 |
| /* Negotiate Bandwidth Command (opt) */ |
| #define TRB_NEG_BANDWIDTH 19 |
| /* Set Latency Tolerance Value Command (opt) */ |
| #define TRB_SET_LT 20 |
| /* Get port bandwidth Command */ |
| #define TRB_GET_BW 21 |
| /* Force Header Command - generate a transaction or link management packet */ |
| #define TRB_FORCE_HEADER 22 |
| /* No-op Command - not for transfer rings */ |
| #define TRB_CMD_NOOP 23 |
| /* TRB IDs 24-31 reserved */ |
| /* Event TRBS */ |
| /* Transfer Event */ |
| #define TRB_TRANSFER 32 |
| /* Command Completion Event */ |
| #define TRB_COMPLETION 33 |
| /* Port Status Change Event */ |
| #define TRB_PORT_STATUS 34 |
| /* Bandwidth Request Event (opt) */ |
| #define TRB_BANDWIDTH_EVENT 35 |
| /* Doorbell Event (opt) */ |
| #define TRB_DOORBELL 36 |
| /* Host Controller Event */ |
| #define TRB_HC_EVENT 37 |
| /* Device Notification Event - device sent function wake notification */ |
| #define TRB_DEV_NOTE 38 |
| /* MFINDEX Wrap Event - microframe counter wrapped */ |
| #define TRB_MFINDEX_WRAP 39 |
| /* TRB IDs 40-47 reserved, 48-63 is vendor-defined */ |
| |
| /* Nec vendor-specific command completion event. */ |
| #define TRB_NEC_CMD_COMP 48 |
| /* Get NEC firmware revision. */ |
| #define TRB_NEC_GET_FW 49 |
| |
| #define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK)) |
| /* Above, but for __le32 types -- can avoid work by swapping constants: */ |
| #define TRB_TYPE_LINK_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \ |
| cpu_to_le32(TRB_TYPE(TRB_LINK))) |
| #define TRB_TYPE_NOOP_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \ |
| cpu_to_le32(TRB_TYPE(TRB_TR_NOOP))) |
| |
| #define NEC_FW_MINOR(p) (((p) >> 0) & 0xff) |
| #define NEC_FW_MAJOR(p) (((p) >> 8) & 0xff) |
| |
| /* |
| * TRBS_PER_SEGMENT must be a multiple of 4, |
| * since the command ring is 64-byte aligned. |
| * It must also be greater than 16. |
| */ |
| #define TRBS_PER_SEGMENT 64 |
| /* Allow two commands + a link TRB, along with any reserved command TRBs */ |
| #define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3) |
| #define SEGMENT_SIZE (TRBS_PER_SEGMENT*16) |
| /* SEGMENT_SHIFT should be log2(SEGMENT_SIZE). |
| * Change this if you change TRBS_PER_SEGMENT! |
| */ |
| #define SEGMENT_SHIFT 10 |
| /* TRB buffer pointers can't cross 64KB boundaries */ |
| #define TRB_MAX_BUFF_SHIFT 16 |
| #define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT) |
| |
| struct xhci_segment { |
| union xhci_trb *trbs; |
| /* private to HCD */ |
| struct xhci_segment *next; |
| dma_addr_t dma; |
| }; |
| |
| struct xhci_td { |
| struct list_head td_list; |
| struct list_head cancelled_td_list; |
| struct urb *urb; |
| struct xhci_segment *start_seg; |
| union xhci_trb *first_trb; |
| union xhci_trb *last_trb; |
| }; |
| |
| struct xhci_dequeue_state { |
| struct xhci_segment *new_deq_seg; |
| union xhci_trb *new_deq_ptr; |
| int new_cycle_state; |
| }; |
| |
| struct xhci_ring { |
| struct xhci_segment *first_seg; |
| union xhci_trb *enqueue; |
| struct xhci_segment *enq_seg; |
| unsigned int enq_updates; |
| union xhci_trb *dequeue; |
| struct xhci_segment *deq_seg; |
| unsigned int deq_updates; |
| struct list_head td_list; |
| /* |
| * Write the cycle state into the TRB cycle field to give ownership of |
| * the TRB to the host controller (if we are the producer), or to check |
| * if we own the TRB (if we are the consumer). See section 4.9.1. |
| */ |
| u32 cycle_state; |
| unsigned int stream_id; |
| bool last_td_was_short; |
| }; |
| |
| struct xhci_erst_entry { |
| /* 64-bit event ring segment address */ |
| __le64 seg_addr; |
| __le32 seg_size; |
| /* Set to zero */ |
| __le32 rsvd; |
| }; |
| |
| struct xhci_erst { |
| struct xhci_erst_entry *entries; |
| unsigned int num_entries; |
| /* xhci->event_ring keeps track of segment dma addresses */ |
| dma_addr_t erst_dma_addr; |
| /* Num entries the ERST can contain */ |
| unsigned int erst_size; |
| }; |
| |
| struct xhci_scratchpad { |
| u64 *sp_array; |
| dma_addr_t sp_dma; |
| void **sp_buffers; |
| dma_addr_t *sp_dma_buffers; |
| }; |
| |
| struct urb_priv { |
| int length; |
| int td_cnt; |
| struct xhci_td *td[0]; |
| }; |
| |
| /* |
| * Each segment table entry is 4*32bits long. 1K seems like an ok size: |
| * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table, |
| * meaning 64 ring segments. |
| * Initial allocated size of the ERST, in number of entries */ |
| #define ERST_NUM_SEGS 1 |
| /* Initial allocated size of the ERST, in number of entries */ |
| #define ERST_SIZE 64 |
| /* Initial number of event segment rings allocated */ |
| #define ERST_ENTRIES 1 |
| /* Poll every 60 seconds */ |
| #define POLL_TIMEOUT 60 |
| /* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */ |
| #define XHCI_STOP_EP_CMD_TIMEOUT 5 |
| /* XXX: Make these module parameters */ |
| |
| struct s3_save { |
| u32 command; |
| u32 dev_nt; |
| u64 dcbaa_ptr; |
| u32 config_reg; |
| u32 irq_pending; |
| u32 irq_control; |
| u32 erst_size; |
| u64 erst_base; |
| u64 erst_dequeue; |
| }; |
| |
| /* Use for lpm */ |
| struct dev_info { |
| u32 dev_id; |
| struct list_head list; |
| }; |
| |
| struct xhci_bus_state { |
| unsigned long bus_suspended; |
| unsigned long next_statechange; |
| |
| /* Port suspend arrays are indexed by the portnum of the fake roothub */ |
| /* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */ |
| u32 port_c_suspend; |
| u32 suspended_ports; |
| unsigned long resume_done[USB_MAXCHILDREN]; |
| }; |
| |
| static inline unsigned int hcd_index(struct usb_hcd *hcd) |
| { |
| if (hcd->speed == HCD_USB3) |
| return 0; |
| else |
| return 1; |
| } |
| |
| /* There is one ehci_hci structure per controller */ |
| struct xhci_hcd { |
| struct usb_hcd *main_hcd; |
| struct usb_hcd *shared_hcd; |
| /* glue to PCI and HCD framework */ |
| struct xhci_cap_regs __iomem *cap_regs; |
| struct xhci_op_regs __iomem *op_regs; |
| struct xhci_run_regs __iomem *run_regs; |
| struct xhci_doorbell_array __iomem *dba; |
| /* Our HCD's current interrupter register set */ |
| struct xhci_intr_reg __iomem *ir_set; |
| |
| /* Cached register copies of read-only HC data */ |
| __u32 hcs_params1; |
| __u32 hcs_params2; |
| __u32 hcs_params3; |
| __u32 hcc_params; |
| |
| spinlock_t lock; |
| |
| /* packed release number */ |
| u8 sbrn; |
| u16 hci_version; |
| u8 max_slots; |
| u8 max_interrupters; |
| u8 max_ports; |
| u8 isoc_threshold; |
| int event_ring_max; |
| int addr_64; |
| /* 4KB min, 128MB max */ |
| int page_size; |
| /* Valid values are 12 to 20, inclusive */ |
| int page_shift; |
| /* msi-x vectors */ |
| int msix_count; |
| struct msix_entry *msix_entries; |
| /* data structures */ |
| struct xhci_device_context_array *dcbaa; |
| struct xhci_ring *cmd_ring; |
| unsigned int cmd_ring_reserved_trbs; |
| struct xhci_ring *event_ring; |
| struct xhci_erst erst; |
| /* Scratchpad */ |
| struct xhci_scratchpad *scratchpad; |
| /* Store LPM test failed devices' information */ |
| struct list_head lpm_failed_devs; |
| |
| /* slot enabling and address device helpers */ |
| struct completion addr_dev; |
| int slot_id; |
| /* Internal mirror of the HW's dcbaa */ |
| struct xhci_virt_device *devs[MAX_HC_SLOTS]; |
| /* For keeping track of bandwidth domains per roothub. */ |
| struct xhci_root_port_bw_info *rh_bw; |
| |
| /* DMA pools */ |
| struct dma_pool *device_pool; |
| struct dma_pool *segment_pool; |
| struct dma_pool *small_streams_pool; |
| struct dma_pool *medium_streams_pool; |
| |
| #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING |
| /* Poll the rings - for debugging */ |
| struct timer_list event_ring_timer; |
| int zombie; |
| #endif |
| /* Host controller watchdog timer structures */ |
| unsigned int xhc_state; |
| |
| u32 command; |
| struct s3_save s3; |
| /* Host controller is dying - not responding to commands. "I'm not dead yet!" |
| * |
| * xHC interrupts have been disabled and a watchdog timer will (or has already) |
| * halt the xHCI host, and complete all URBs with an -ESHUTDOWN code. Any code |
| * that sees this status (other than the timer that set it) should stop touching |
| * hardware immediately. Interrupt handlers should return immediately when |
| * they see this status (any time they drop and re-acquire xhci->lock). |
| * xhci_urb_dequeue() should call usb_hcd_check_unlink_urb() and return without |
| * putting the TD on the canceled list, etc. |
| * |
| * There are no reports of xHCI host controllers that display this issue. |
| */ |
| #define XHCI_STATE_DYING (1 << 0) |
| #define XHCI_STATE_HALTED (1 << 1) |
| /* Statistics */ |
| int error_bitmask; |
| unsigned int quirks; |
| #define XHCI_LINK_TRB_QUIRK (1 << 0) |
| #define XHCI_RESET_EP_QUIRK (1 << 1) |
| #define XHCI_NEC_HOST (1 << 2) |
| #define XHCI_AMD_PLL_FIX (1 << 3) |
| #define XHCI_SPURIOUS_SUCCESS (1 << 4) |
| /* |
| * Certain Intel host controllers have a limit to the number of endpoint |
| * contexts they can handle. Ideally, they would signal that they can't handle |
| * anymore endpoint contexts by returning a Resource Error for the Configure |
| * Endpoint command, but they don't. Instead they expect software to keep track |
| * of the number of active endpoints for them, across configure endpoint |
| * commands, reset device commands, disable slot commands, and address device |
| * commands. |
| */ |
| #define XHCI_EP_LIMIT_QUIRK (1 << 5) |
| #define XHCI_BROKEN_MSI (1 << 6) |
| #define XHCI_RESET_ON_RESUME (1 << 7) |
| #define XHCI_SW_BW_CHECKING (1 << 8) |
| unsigned int num_active_eps; |
| unsigned int limit_active_eps; |
| /* There are two roothubs to keep track of bus suspend info for */ |
| struct xhci_bus_state bus_state[2]; |
| /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */ |
| u8 *port_array; |
| /* Array of pointers to USB 3.0 PORTSC registers */ |
| __le32 __iomem **usb3_ports; |
| unsigned int num_usb3_ports; |
| /* Array of pointers to USB 2.0 PORTSC registers */ |
| __le32 __iomem **usb2_ports; |
| unsigned int num_usb2_ports; |
| /* support xHCI 0.96 spec USB2 software LPM */ |
| unsigned sw_lpm_support:1; |
| /* support xHCI 1.0 spec USB2 hardware LPM */ |
| unsigned hw_lpm_support:1; |
| }; |
| |
| /* convert between an HCD pointer and the corresponding EHCI_HCD */ |
| static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd) |
| { |
| return *((struct xhci_hcd **) (hcd->hcd_priv)); |
| } |
| |
| static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci) |
| { |
| return xhci->main_hcd; |
| } |
| |
| #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING |
| #define XHCI_DEBUG 1 |
| #else |
| #define XHCI_DEBUG 0 |
| #endif |
| |
| #define xhci_dbg(xhci, fmt, args...) \ |
| do { if (XHCI_DEBUG) dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0) |
| #define xhci_info(xhci, fmt, args...) \ |
| do { if (XHCI_DEBUG) dev_info(xhci_to_hcd(xhci)->self.controller , fmt , ## args); } while (0) |
| #define xhci_err(xhci, fmt, args...) \ |
| dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args) |
| #define xhci_warn(xhci, fmt, args...) \ |
| dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args) |
| |
| /* TODO: copied from ehci.h - can be refactored? */ |
| /* xHCI spec says all registers are little endian */ |
| static inline unsigned int xhci_readl(const struct xhci_hcd *xhci, |
| __le32 __iomem *regs) |
| { |
| return readl(regs); |
| } |
| static inline void xhci_writel(struct xhci_hcd *xhci, |
| const unsigned int val, __le32 __iomem *regs) |
| { |
| writel(val, regs); |
| } |
| |
| /* |
| * Registers should always be accessed with double word or quad word accesses. |
| * |
| * Some xHCI implementations may support 64-bit address pointers. Registers |
| * with 64-bit address pointers should be written to with dword accesses by |
| * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second. |
| * xHCI implementations that do not support 64-bit address pointers will ignore |
| * the high dword, and write order is irrelevant. |
| */ |
| static inline u64 xhci_read_64(const struct xhci_hcd *xhci, |
| __le64 __iomem *regs) |
| { |
| __u32 __iomem *ptr = (__u32 __iomem *) regs; |
| u64 val_lo = readl(ptr); |
| u64 val_hi = readl(ptr + 1); |
| return val_lo + (val_hi << 32); |
| } |
| static inline void xhci_write_64(struct xhci_hcd *xhci, |
| const u64 val, __le64 __iomem *regs) |
| { |
| __u32 __iomem *ptr = (__u32 __iomem *) regs; |
| u32 val_lo = lower_32_bits(val); |
| u32 val_hi = upper_32_bits(val); |
| |
| writel(val_lo, ptr); |
| writel(val_hi, ptr + 1); |
| } |
| |
| static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci) |
| { |
| return xhci->quirks & XHCI_LINK_TRB_QUIRK; |
| } |
| |
| /* xHCI debugging */ |
| void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num); |
| void xhci_print_registers(struct xhci_hcd *xhci); |
| void xhci_dbg_regs(struct xhci_hcd *xhci); |
| void xhci_print_run_regs(struct xhci_hcd *xhci); |
| void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb); |
| void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb); |
| void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg); |
| void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring); |
| void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst); |
| void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci); |
| void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring); |
| void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep); |
| char *xhci_get_slot_state(struct xhci_hcd *xhci, |
| struct xhci_container_ctx *ctx); |
| void xhci_dbg_ep_rings(struct xhci_hcd *xhci, |
| unsigned int slot_id, unsigned int ep_index, |
| struct xhci_virt_ep *ep); |
| |
| /* xHCI memory management */ |
| void xhci_mem_cleanup(struct xhci_hcd *xhci); |
| int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags); |
| void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id); |
| int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags); |
| int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev); |
| void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, |
| struct usb_device *udev); |
| unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc); |
| unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc); |
| unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index); |
| unsigned int xhci_last_valid_endpoint(u32 added_ctxs); |
| void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep); |
| void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci, |
| struct xhci_bw_info *ep_bw, |
| struct xhci_interval_bw_table *bw_table, |
| struct usb_device *udev, |
| struct xhci_virt_ep *virt_ep, |
| struct xhci_tt_bw_info *tt_info); |
| void xhci_update_tt_active_eps(struct xhci_hcd *xhci, |
| struct xhci_virt_device *virt_dev, |
| int old_active_eps); |
| void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info); |
| void xhci_update_bw_info(struct xhci_hcd *xhci, |
| struct xhci_container_ctx *in_ctx, |
| struct xhci_input_control_ctx *ctrl_ctx, |
| struct xhci_virt_device *virt_dev); |
| void xhci_endpoint_copy(struct xhci_hcd *xhci, |
| struct xhci_container_ctx *in_ctx, |
| struct xhci_container_ctx *out_ctx, |
| unsigned int ep_index); |
| void xhci_slot_copy(struct xhci_hcd *xhci, |
| struct xhci_container_ctx *in_ctx, |
| struct xhci_container_ctx *out_ctx); |
| int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, |
| struct usb_device *udev, struct usb_host_endpoint *ep, |
| gfp_t mem_flags); |
| void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring); |
| void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci, |
| struct xhci_virt_device *virt_dev, |
| unsigned int ep_index); |
| struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, |
| unsigned int num_stream_ctxs, |
| unsigned int num_streams, gfp_t flags); |
| void xhci_free_stream_info(struct xhci_hcd *xhci, |
| struct xhci_stream_info *stream_info); |
| void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci, |
| struct xhci_ep_ctx *ep_ctx, |
| struct xhci_stream_info *stream_info); |
| void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci, |
| struct xhci_ep_ctx *ep_ctx, |
| struct xhci_virt_ep *ep); |
| void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci, |
| struct xhci_virt_device *virt_dev, bool drop_control_ep); |
| struct xhci_ring *xhci_dma_to_transfer_ring( |
| struct xhci_virt_ep *ep, |
| u64 address); |
| struct xhci_ring *xhci_stream_id_to_ring( |
| struct xhci_virt_device *dev, |
| unsigned int ep_index, |
| unsigned int stream_id); |
| struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, |
| bool allocate_in_ctx, bool allocate_completion, |
| gfp_t mem_flags); |
| void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv); |
| void xhci_free_command(struct xhci_hcd *xhci, |
| struct xhci_command *command); |
| |
| #ifdef CONFIG_PCI |
| /* xHCI PCI glue */ |
| int xhci_register_pci(void); |
| void xhci_unregister_pci(void); |
| #endif |
| |
| /* xHCI host controller glue */ |
| void xhci_quiesce(struct xhci_hcd *xhci); |
| int xhci_halt(struct xhci_hcd *xhci); |
| int xhci_reset(struct xhci_hcd *xhci); |
| int xhci_init(struct usb_hcd *hcd); |
| int xhci_run(struct usb_hcd *hcd); |
| void xhci_stop(struct usb_hcd *hcd); |
| void xhci_shutdown(struct usb_hcd *hcd); |
| |
| #ifdef CONFIG_PM |
| int xhci_suspend(struct xhci_hcd *xhci); |
| int xhci_resume(struct xhci_hcd *xhci, bool hibernated); |
| #else |
| #define xhci_suspend NULL |
| #define xhci_resume NULL |
| #endif |
| |
| int xhci_get_frame(struct usb_hcd *hcd); |
| irqreturn_t xhci_irq(struct usb_hcd *hcd); |
| irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd); |
| int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev); |
| void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev); |
| int xhci_alloc_tt_info(struct xhci_hcd *xhci, |
| struct xhci_virt_device *virt_dev, |
| struct usb_device *hdev, |
| struct usb_tt *tt, gfp_t mem_flags); |
| int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, |
| struct usb_host_endpoint **eps, unsigned int num_eps, |
| unsigned int num_streams, gfp_t mem_flags); |
| int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, |
| struct usb_host_endpoint **eps, unsigned int num_eps, |
| gfp_t mem_flags); |
| int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev); |
| int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev); |
| int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, |
| struct usb_tt *tt, gfp_t mem_flags); |
| int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags); |
| int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); |
| int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); |
| int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep); |
| void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep); |
| int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev); |
| int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); |
| void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); |
| |
| /* xHCI ring, segment, TRB, and TD functions */ |
| dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb); |
| struct xhci_segment *trb_in_td(struct xhci_segment *start_seg, |
| union xhci_trb *start_trb, union xhci_trb *end_trb, |
| dma_addr_t suspect_dma); |
| int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code); |
| void xhci_ring_cmd_db(struct xhci_hcd *xhci); |
| int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id); |
| int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, |
| u32 slot_id); |
| int xhci_queue_vendor_command(struct xhci_hcd *xhci, |
| u32 field1, u32 field2, u32 field3, u32 field4); |
| int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id, |
| unsigned int ep_index, int suspend); |
| int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, |
| int slot_id, unsigned int ep_index); |
| int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, |
| int slot_id, unsigned int ep_index); |
| int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, |
| int slot_id, unsigned int ep_index); |
| int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, |
| struct urb *urb, int slot_id, unsigned int ep_index); |
| int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, |
| u32 slot_id, bool command_must_succeed); |
| int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, |
| u32 slot_id); |
| int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id, |
| unsigned int ep_index); |
| int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id); |
| void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, |
| unsigned int slot_id, unsigned int ep_index, |
| unsigned int stream_id, struct xhci_td *cur_td, |
| struct xhci_dequeue_state *state); |
| void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci, |
| unsigned int slot_id, unsigned int ep_index, |
| unsigned int stream_id, |
| struct xhci_dequeue_state *deq_state); |
| void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci, |
| struct usb_device *udev, unsigned int ep_index); |
| void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci, |
| unsigned int slot_id, unsigned int ep_index, |
| struct xhci_dequeue_state *deq_state); |
| void xhci_stop_endpoint_command_watchdog(unsigned long arg); |
| void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, |
| unsigned int ep_index, unsigned int stream_id); |
| |
| /* xHCI roothub code */ |
| void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, |
| int port_id, u32 link_state); |
| void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, |
| int port_id, u32 port_bit); |
| int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, |
| char *buf, u16 wLength); |
| int xhci_hub_status_data(struct usb_hcd *hcd, char *buf); |
| |
| #ifdef CONFIG_PM |
| int xhci_bus_suspend(struct usb_hcd *hcd); |
| int xhci_bus_resume(struct usb_hcd *hcd); |
| #else |
| #define xhci_bus_suspend NULL |
| #define xhci_bus_resume NULL |
| #endif /* CONFIG_PM */ |
| |
| u32 xhci_port_state_to_neutral(u32 state); |
| int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, |
| u16 port); |
| void xhci_ring_device(struct xhci_hcd *xhci, int slot_id); |
| |
| /* xHCI contexts */ |
| struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); |
| struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); |
| struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index); |
| |
| #endif /* __LINUX_XHCI_HCD_H */ |