| /* |
| * linux/arch/arm/mach-sa1100/neponset.c |
| */ |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/serial_core.h> |
| #include <linux/slab.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/irq.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/irq.h> |
| #include <asm/mach/serial_sa1100.h> |
| #include <asm/hardware/sa1111.h> |
| #include <asm/sizes.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/assabet.h> |
| #include <mach/neponset.h> |
| |
| struct neponset_drvdata { |
| struct platform_device *sa1111; |
| struct platform_device *smc91x; |
| #ifdef CONFIG_PM_SLEEP |
| u32 ncr0; |
| u32 mdm_ctl_0; |
| #endif |
| }; |
| |
| void neponset_ncr_frob(unsigned int mask, unsigned int val) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| NCR_0 = (NCR_0 & ~mask) | val; |
| local_irq_restore(flags); |
| } |
| |
| static void neponset_set_mctrl(struct uart_port *port, u_int mctrl) |
| { |
| u_int mdm_ctl0 = MDM_CTL_0; |
| |
| if (port->mapbase == _Ser1UTCR0) { |
| if (mctrl & TIOCM_RTS) |
| mdm_ctl0 &= ~MDM_CTL0_RTS2; |
| else |
| mdm_ctl0 |= MDM_CTL0_RTS2; |
| |
| if (mctrl & TIOCM_DTR) |
| mdm_ctl0 &= ~MDM_CTL0_DTR2; |
| else |
| mdm_ctl0 |= MDM_CTL0_DTR2; |
| } else if (port->mapbase == _Ser3UTCR0) { |
| if (mctrl & TIOCM_RTS) |
| mdm_ctl0 &= ~MDM_CTL0_RTS1; |
| else |
| mdm_ctl0 |= MDM_CTL0_RTS1; |
| |
| if (mctrl & TIOCM_DTR) |
| mdm_ctl0 &= ~MDM_CTL0_DTR1; |
| else |
| mdm_ctl0 |= MDM_CTL0_DTR1; |
| } |
| |
| MDM_CTL_0 = mdm_ctl0; |
| } |
| |
| static u_int neponset_get_mctrl(struct uart_port *port) |
| { |
| u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; |
| u_int mdm_ctl1 = MDM_CTL_1; |
| |
| if (port->mapbase == _Ser1UTCR0) { |
| if (mdm_ctl1 & MDM_CTL1_DCD2) |
| ret &= ~TIOCM_CD; |
| if (mdm_ctl1 & MDM_CTL1_CTS2) |
| ret &= ~TIOCM_CTS; |
| if (mdm_ctl1 & MDM_CTL1_DSR2) |
| ret &= ~TIOCM_DSR; |
| } else if (port->mapbase == _Ser3UTCR0) { |
| if (mdm_ctl1 & MDM_CTL1_DCD1) |
| ret &= ~TIOCM_CD; |
| if (mdm_ctl1 & MDM_CTL1_CTS1) |
| ret &= ~TIOCM_CTS; |
| if (mdm_ctl1 & MDM_CTL1_DSR1) |
| ret &= ~TIOCM_DSR; |
| } |
| |
| return ret; |
| } |
| |
| static struct sa1100_port_fns neponset_port_fns __devinitdata = { |
| .set_mctrl = neponset_set_mctrl, |
| .get_mctrl = neponset_get_mctrl, |
| }; |
| |
| /* |
| * Install handler for Neponset IRQ. Note that we have to loop here |
| * since the ETHERNET and USAR IRQs are level based, and we need to |
| * ensure that the IRQ signal is deasserted before returning. This |
| * is rather unfortunate. |
| */ |
| static void |
| neponset_irq_handler(unsigned int irq, struct irq_desc *desc) |
| { |
| unsigned int irr; |
| |
| while (1) { |
| /* |
| * Acknowledge the parent IRQ. |
| */ |
| desc->irq_data.chip->irq_ack(&desc->irq_data); |
| |
| /* |
| * Read the interrupt reason register. Let's have all |
| * active IRQ bits high. Note: there is a typo in the |
| * Neponset user's guide for the SA1111 IRR level. |
| */ |
| irr = IRR ^ (IRR_ETHERNET | IRR_USAR); |
| |
| if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0) |
| break; |
| |
| /* |
| * Since there is no individual mask, we have to |
| * mask the parent IRQ. This is safe, since we'll |
| * recheck the register for any pending IRQs. |
| */ |
| if (irr & (IRR_ETHERNET | IRR_USAR)) { |
| desc->irq_data.chip->irq_mask(&desc->irq_data); |
| |
| /* |
| * Ack the interrupt now to prevent re-entering |
| * this neponset handler. Again, this is safe |
| * since we'll check the IRR register prior to |
| * leaving. |
| */ |
| desc->irq_data.chip->irq_ack(&desc->irq_data); |
| |
| if (irr & IRR_ETHERNET) { |
| generic_handle_irq(IRQ_NEPONSET_SMC9196); |
| } |
| |
| if (irr & IRR_USAR) { |
| generic_handle_irq(IRQ_NEPONSET_USAR); |
| } |
| |
| desc->irq_data.chip->irq_unmask(&desc->irq_data); |
| } |
| |
| if (irr & IRR_SA1111) { |
| generic_handle_irq(IRQ_NEPONSET_SA1111); |
| } |
| } |
| } |
| |
| /* |
| * Yes, we really do not have any kind of masking or unmasking |
| */ |
| static void nochip_noop(struct irq_data *irq) |
| { |
| } |
| |
| static struct irq_chip nochip = { |
| .name = "neponset", |
| .irq_ack = nochip_noop, |
| .irq_mask = nochip_noop, |
| .irq_unmask = nochip_noop, |
| }; |
| |
| static struct resource sa1111_resources[] = { |
| [0] = DEFINE_RES_MEM(0x40000000, SZ_8K), |
| [1] = DEFINE_RES_IRQ(IRQ_NEPONSET_SA1111), |
| }; |
| |
| static struct sa1111_platform_data sa1111_info = { |
| .irq_base = IRQ_BOARD_END, |
| }; |
| |
| static struct resource smc91x_resources[] = { |
| [0] = DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS, 0x02000000, "smc91x-regs"), |
| [1] = DEFINE_RES_IRQ(IRQ_NEPONSET_SMC9196), |
| [2] = DEFINE_RES_MEM_NAMED(SA1100_CS3_PHYS + 0x02000000, |
| 0x02000000, "smc91x-attrib"), |
| }; |
| |
| static int __devinit neponset_probe(struct platform_device *dev) |
| { |
| struct neponset_drvdata *d; |
| struct platform_device_info sa1111_devinfo = { |
| .parent = &dev->dev, |
| .name = "sa1111", |
| .id = 0, |
| .res = sa1111_resources, |
| .num_res = ARRAY_SIZE(sa1111_resources), |
| .data = &sa1111_info, |
| .size_data = sizeof(sa1111_info), |
| .dma_mask = 0xffffffffUL, |
| }; |
| struct platform_device_info smc91x_devinfo = { |
| .parent = &dev->dev, |
| .name = "smc91x", |
| .id = 0, |
| .res = smc91x_resources, |
| .num_res = ARRAY_SIZE(smc91x_resources), |
| }; |
| int ret; |
| |
| d = kzalloc(sizeof(*d), GFP_KERNEL); |
| if (!d) { |
| ret = -ENOMEM; |
| goto err_alloc; |
| } |
| |
| sa1100_register_uart_fns(&neponset_port_fns); |
| |
| /* |
| * Install handler for GPIO25. |
| */ |
| irq_set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING); |
| irq_set_chained_handler(IRQ_GPIO25, neponset_irq_handler); |
| |
| /* |
| * We would set IRQ_GPIO25 to be a wake-up IRQ, but |
| * unfortunately something on the Neponset activates |
| * this IRQ on sleep (ethernet?) |
| */ |
| #if 0 |
| enable_irq_wake(IRQ_GPIO25); |
| #endif |
| |
| /* |
| * Setup other Neponset IRQs. SA1111 will be done by the |
| * generic SA1111 code. |
| */ |
| irq_set_chip_and_handler(IRQ_NEPONSET_SMC9196, &nochip, |
| handle_simple_irq); |
| set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE); |
| irq_set_chip_and_handler(IRQ_NEPONSET_USAR, &nochip, |
| handle_simple_irq); |
| set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE); |
| irq_set_chip(IRQ_NEPONSET_SA1111, &nochip); |
| |
| /* |
| * Disable GPIO 0/1 drivers so the buttons work on the module. |
| */ |
| NCR_0 = NCR_GP01_OFF; |
| |
| d->sa1111 = platform_device_register_full(&sa1111_devinfo); |
| d->smc91x = platform_device_register_full(&smc91x_devinfo); |
| |
| platform_set_drvdata(dev, d); |
| |
| return 0; |
| |
| err_alloc: |
| return ret; |
| } |
| |
| static int __devexit neponset_remove(struct platform_device *dev) |
| { |
| struct neponset_drvdata *d = platform_get_drvdata(dev); |
| |
| if (!IS_ERR(d->sa1111)) |
| platform_device_unregister(d->sa1111); |
| if (!IS_ERR(d->smc91x)) |
| platform_device_unregister(d->smc91x); |
| irq_set_chained_handler(IRQ_GPIO25, NULL); |
| |
| kfree(d); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int neponset_suspend(struct platform_device *dev, pm_message_t state) |
| { |
| struct neponset_drvdata *d = platform_get_drvdata(dev); |
| |
| d->ncr0 = NCR_0; |
| d->mdm_ctl_0 = MDM_CTL_0; |
| |
| return 0; |
| } |
| |
| static int neponset_resume(struct platform_device *dev) |
| { |
| struct neponset_drvdata *d = platform_get_drvdata(dev); |
| |
| NCR_0 = d->ncr0; |
| MDM_CTL_0 = d->mdm_ctl_0; |
| |
| return 0; |
| } |
| |
| #else |
| #define neponset_suspend NULL |
| #define neponset_resume NULL |
| #endif |
| |
| static struct platform_driver neponset_device_driver = { |
| .probe = neponset_probe, |
| .remove = __devexit_p(neponset_remove), |
| .suspend = neponset_suspend, |
| .resume = neponset_resume, |
| .driver = { |
| .name = "neponset", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static struct resource neponset_resources[] = { |
| [0] = DEFINE_RES_MEM(0x10000000, 0x08000000), |
| }; |
| |
| static struct platform_device neponset_device = { |
| .name = "neponset", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(neponset_resources), |
| .resource = neponset_resources, |
| }; |
| |
| extern void sa1110_mb_disable(void); |
| |
| static int __init neponset_init(void) |
| { |
| platform_driver_register(&neponset_device_driver); |
| |
| /* |
| * The Neponset is only present on the Assabet machine type. |
| */ |
| if (!machine_is_assabet()) |
| return -ENODEV; |
| |
| /* |
| * Ensure that the memory bus request/grant signals are setup, |
| * and the grant is held in its inactive state, whether or not |
| * we actually have a Neponset attached. |
| */ |
| sa1110_mb_disable(); |
| |
| if (!machine_has_neponset()) { |
| printk(KERN_DEBUG "Neponset expansion board not present\n"); |
| return -ENODEV; |
| } |
| |
| if (WHOAMI != 0x11) { |
| printk(KERN_WARNING "Neponset board detected, but " |
| "wrong ID: %02x\n", WHOAMI); |
| return -ENODEV; |
| } |
| |
| return platform_device_register(&neponset_device); |
| } |
| |
| subsys_initcall(neponset_init); |
| |
| static struct map_desc neponset_io_desc[] __initdata = { |
| { /* System Registers */ |
| .virtual = 0xf3000000, |
| .pfn = __phys_to_pfn(0x10000000), |
| .length = SZ_1M, |
| .type = MT_DEVICE |
| }, { /* SA-1111 */ |
| .virtual = 0xf4000000, |
| .pfn = __phys_to_pfn(0x40000000), |
| .length = SZ_1M, |
| .type = MT_DEVICE |
| } |
| }; |
| |
| void __init neponset_map_io(void) |
| { |
| iotable_init(neponset_io_desc, ARRAY_SIZE(neponset_io_desc)); |
| } |