b43: Convert to use of the new SPROM structure
The b43 driver is modified to use the new SPROM structure.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 72321d8..16b413d 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1924,7 +1924,7 @@
mask |= 0x0180;
set |= 0x0180;
}
- if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_PACTRL) {
+ if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) {
b43_write16(dev, B43_MMIO_GPIO_MASK,
b43_read16(dev, B43_MMIO_GPIO_MASK)
| 0x0200);
@@ -2289,7 +2289,7 @@
if (!b43_has_hardware_pctl(phy))
b43_lo_g_ctl_mark_all_unused(dev);
- if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI) {
+ if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
b43_mac_suspend(dev);
b43_calc_nrssi_slope(dev);
if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) {
@@ -3208,13 +3208,13 @@
struct ssb_sprom *sprom = &dev->dev->bus->sprom;
u32 hf;
- if (!(sprom->r1.boardflags_lo & B43_BFL_BTCOEXIST))
+ if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST))
return;
if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode)
return;
hf = b43_hf_read(dev);
- if (sprom->r1.boardflags_lo & B43_BFL_BTCMOD)
+ if (sprom->boardflags_lo & B43_BFL_BTCMOD)
hf |= B43_HF_BTCOEXALT;
else
hf |= B43_HF_BTCOEX;
@@ -3345,7 +3345,7 @@
hf |= B43_HF_SYMW;
if (phy->rev == 1)
hf |= B43_HF_GDCW;
- if (sprom->r1.boardflags_lo & B43_BFL_PACTRL)
+ if (sprom->boardflags_lo & B43_BFL_PACTRL)
hf |= B43_HF_OFDMPABOOST;
} else if (phy->type == B43_PHYTYPE_B) {
hf |= B43_HF_SYMW;
@@ -3862,20 +3862,20 @@
/* boardflags workarounds */
if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74)
- bus->sprom.r1.boardflags_lo |= B43_BFL_BTCOEXIST;
+ bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
- bus->sprom.r1.boardflags_lo |= B43_BFL_PACTRL;
+ bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
/* Handle case when gain is not set in sprom */
- if (bus->sprom.r1.antenna_gain_a == 0xFF)
- bus->sprom.r1.antenna_gain_a = 2;
- if (bus->sprom.r1.antenna_gain_bg == 0xFF)
- bus->sprom.r1.antenna_gain_bg = 2;
+ if (bus->sprom.antenna_gain_a == 0xFF)
+ bus->sprom.antenna_gain_a = 2;
+ if (bus->sprom.antenna_gain_bg == 0xFF)
+ bus->sprom.antenna_gain_bg = 2;
/* Convert Antennagain values to Q5.2 */
- bus->sprom.r1.antenna_gain_a <<= 2;
- bus->sprom.r1.antenna_gain_bg <<= 2;
+ bus->sprom.antenna_gain_a <<= 2;
+ bus->sprom.antenna_gain_bg <<= 2;
}
static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl)
@@ -3908,10 +3908,10 @@
hw->max_noise = -110;
hw->queues = 1; /* FIXME: hardware has more queues */
SET_IEEE80211_DEV(hw, dev->dev);
- if (is_valid_ether_addr(sprom->r1.et1mac))
- SET_IEEE80211_PERM_ADDR(hw, sprom->r1.et1mac);
+ if (is_valid_ether_addr(sprom->et1mac))
+ SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
else
- SET_IEEE80211_PERM_ADDR(hw, sprom->r1.il0mac);
+ SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
/* Get and initialize struct b43_wl */
wl = hw_to_b43_wl(hw);