Documentation/vm/slub.txt - kernel/msm-4.9 - Gitiles

 Short users guide for SLUB
 --------------------------

 The basic philosophy of SLUB is very different from SLAB. SLAB
 requires rebuilding the kernel to activate debug options for all
 slab caches. SLUB always includes full debugging but it is off by default.
 SLUB can enable debugging only for selected slabs in order to avoid
 an impact on overall system performance which may make a bug more
 difficult to find.

 In order to switch debugging on one can add a option "slub_debug"
 to the kernel command line. That will enable full debugging for
 all slabs.

 Typically one would then use the "slabinfo" command to get statistical
 data and perform operation on the slabs. By default slabinfo only lists
 slabs that have data in them. See "slabinfo -h" for more options when
 running the command. slabinfo can be compiled with

 gcc -o slabinfo Documentation/vm/slabinfo.c

 Some of the modes of operation of slabinfo require that slub debugging
 be enabled on the command line. F.e. no tracking information will be
 available without debugging on and validation can only partially
 be performed if debugging was not switched on.

 Some more sophisticated uses of slub_debug:
 -------------------------------------------

 Parameters may be given to slub_debug. If none is specified then full
 debugging is enabled. Format:

 slub_debug=<Debug-Options>       Enable options for all slabs
 slub_debug=<Debug-Options>,<slab name>
 				Enable options only for select slabs

 Possible debug options are
 	F		Sanity checks on (enables SLAB_DEBUG_FREE. Sorry
 			SLAB legacy issues)
 	Z		Red zoning
 	P		Poisoning (object and padding)
 	U		User tracking (free and alloc)
 	T		Trace (please only use on single slabs)
 	A		Toggle failslab filter mark for the cache
 	O		Switch debugging off for caches that would have
 			caused higher minimum slab orders
 	-		Switch all debugging off (useful if the kernel is
 			configured with CONFIG_SLUB_DEBUG_ON)

 F.e. in order to boot just with sanity checks and red zoning one would specify:

 	slub_debug=FZ

 Trying to find an issue in the dentry cache? Try

 	slub_debug=,dentry

 to only enable debugging on the dentry cache.

 Red zoning and tracking may realign the slab.  We can just apply sanity checks
 to the dentry cache with

 	slub_debug=F,dentry

 Debugging options may require the minimum possible slab order to increase as
 a result of storing the metadata (for example, caches with PAGE_SIZE object
 sizes).  This has a higher liklihood of resulting in slab allocation errors
 in low memory situations or if there's high fragmentation of memory.  To
 switch off debugging for such caches by default, use

 	slub_debug=O

 In case you forgot to enable debugging on the kernel command line: It is
 possible to enable debugging manually when the kernel is up. Look at the
 contents of:

 /sys/kernel/slab/<slab name>/

 Look at the writable files. Writing 1 to them will enable the
 corresponding debug option. All options can be set on a slab that does
 not contain objects. If the slab already contains objects then sanity checks
 and tracing may only be enabled. The other options may cause the realignment
 of objects.

 Careful with tracing: It may spew out lots of information and never stop if
 used on the wrong slab.

 Slab merging
 ------------

 If no debug options are specified then SLUB may merge similar slabs together
 in order to reduce overhead and increase cache hotness of objects.
 slabinfo -a displays which slabs were merged together.

 Slab validation
 ---------------

 SLUB can validate all object if the kernel was booted with slub_debug. In
 order to do so you must have the slabinfo tool. Then you can do

 slabinfo -v

 which will test all objects. Output will be generated to the syslog.

 This also works in a more limited way if boot was without slab debug.
 In that case slabinfo -v simply tests all reachable objects. Usually
 these are in the cpu slabs and the partial slabs. Full slabs are not
 tracked by SLUB in a non debug situation.

 Getting more performance
 ------------------------

 To some degree SLUB's performance is limited by the need to take the
 list_lock once in a while to deal with partial slabs. That overhead is
 governed by the order of the allocation for each slab. The allocations
 can be influenced by kernel parameters:

 slub_min_objects=x		(default 4)
 slub_min_order=x		(default 0)
 slub_max_order=x		(default 1)

 slub_min_objects allows to specify how many objects must at least fit
 into one slab in order for the allocation order to be acceptable.
 In general slub will be able to perform this number of allocations
 on a slab without consulting centralized resources (list_lock) where
 contention may occur.

 slub_min_order specifies a minim order of slabs. A similar effect like
 slub_min_objects.

 slub_max_order specified the order at which slub_min_objects should no
 longer be checked. This is useful to avoid SLUB trying to generate
 super large order pages to fit slub_min_objects of a slab cache with
 large object sizes into one high order page.

 SLUB Debug output
 -----------------

 Here is a sample of slub debug output:

 ====================================================================
 BUG kmalloc-8: Redzone overwritten
 --------------------------------------------------------------------

 INFO: 0xc90f6d28-0xc90f6d2b. First byte 0x00 instead of 0xcc
 INFO: Slab 0xc528c530 flags=0x400000c3 inuse=61 fp=0xc90f6d58
 INFO: Object 0xc90f6d20 @offset=3360 fp=0xc90f6d58
 INFO: Allocated in get_modalias+0x61/0xf5 age=53 cpu=1 pid=554

 Bytes b4 0xc90f6d10:  00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
   Object 0xc90f6d20:  31 30 31 39 2e 30 30 35                         1019.005
  Redzone 0xc90f6d28:  00 cc cc cc                                     .
  Padding 0xc90f6d50:  5a 5a 5a 5a 5a 5a 5a 5a                         ZZZZZZZZ

   [<c010523d>] dump_trace+0x63/0x1eb
   [<c01053df>] show_trace_log_lvl+0x1a/0x2f
   [<c010601d>] show_trace+0x12/0x14
   [<c0106035>] dump_stack+0x16/0x18
   [<c017e0fa>] object_err+0x143/0x14b
   [<c017e2cc>] check_object+0x66/0x234
   [<c017eb43>] __slab_free+0x239/0x384
   [<c017f446>] kfree+0xa6/0xc6
   [<c02e2335>] get_modalias+0xb9/0xf5
   [<c02e23b7>] dmi_dev_uevent+0x27/0x3c
   [<c027866a>] dev_uevent+0x1ad/0x1da
   [<c0205024>] kobject_uevent_env+0x20a/0x45b
   [<c020527f>] kobject_uevent+0xa/0xf
   [<c02779f1>] store_uevent+0x4f/0x58
   [<c027758e>] dev_attr_store+0x29/0x2f
   [<c01bec4f>] sysfs_write_file+0x16e/0x19c
   [<c0183ba7>] vfs_write+0xd1/0x15a
   [<c01841d7>] sys_write+0x3d/0x72
   [<c0104112>] sysenter_past_esp+0x5f/0x99
   [<b7f7b410>] 0xb7f7b410
   =======================

 FIX kmalloc-8: Restoring Redzone 0xc90f6d28-0xc90f6d2b=0xcc

 If SLUB encounters a corrupted object (full detection requires the kernel
 to be booted with slub_debug) then the following output will be dumped
 into the syslog:

 1. Description of the problem encountered

 This will be a message in the system log starting with

 ===============================================
 BUG <slab cache affected>: <What went wrong>
 -----------------------------------------------

 INFO: <corruption start>-<corruption_end> <more info>
 INFO: Slab <address> <slab information>
 INFO: Object <address> <object information>
 INFO: Allocated in <kernel function> age=<jiffies since alloc> cpu=<allocated by
 	cpu> pid=<pid of the process>
 INFO: Freed in <kernel function> age=<jiffies since free> cpu=<freed by cpu>
 	 pid=<pid of the process>

 (Object allocation / free information is only available if SLAB_STORE_USER is
 set for the slab. slub_debug sets that option)

 2. The object contents if an object was involved.

 Various types of lines can follow the BUG SLUB line:

 Bytes b4 <address> : <bytes>
 	Shows a few bytes before the object where the problem was detected.
 	Can be useful if the corruption does not stop with the start of the
 	object.

 Object <address> : <bytes>
 	The bytes of the object. If the object is inactive then the bytes
 	typically contain poison values. Any non-poison value shows a
 	corruption by a write after free.

 Redzone <address> : <bytes>
 	The Redzone following the object. The Redzone is used to detect
 	writes after the object. All bytes should always have the same
 	value. If there is any deviation then it is due to a write after
 	the object boundary.

 	(Redzone information is only available if SLAB_RED_ZONE is set.
 	slub_debug sets that option)

 Padding <address> : <bytes>
 	Unused data to fill up the space in order to get the next object
 	properly aligned. In the debug case we make sure that there are
 	at least 4 bytes of padding. This allows the detection of writes
 	before the object.

 3. A stackdump

 The stackdump describes the location where the error was detected. The cause
 of the corruption is may be more likely found by looking at the function that
 allocated or freed the object.

 4. Report on how the problem was dealt with in order to ensure the continued
 operation of the system.

 These are messages in the system log beginning with

 FIX <slab cache affected>: <corrective action taken>

 In the above sample SLUB found that the Redzone of an active object has
 been overwritten. Here a string of 8 characters was written into a slab that
 has the length of 8 characters. However, a 8 character string needs a
 terminating 0. That zero has overwritten the first byte of the Redzone field.
 After reporting the details of the issue encountered the FIX SLUB message
 tells us that SLUB has restored the Redzone to its proper value and then
 system operations continue.

 Emergency operations:
 ---------------------

 Minimal debugging (sanity checks alone) can be enabled by booting with

 	slub_debug=F

 This will be generally be enough to enable the resiliency features of slub
 which will keep the system running even if a bad kernel component will
 keep corrupting objects. This may be important for production systems.
 Performance will be impacted by the sanity checks and there will be a
 continual stream of error messages to the syslog but no additional memory
 will be used (unlike full debugging).

 No guarantees. The kernel component still needs to be fixed. Performance
 may be optimized further by locating the slab that experiences corruption
 and enabling debugging only for that cache

 I.e.

 	slub_debug=F,dentry

 If the corruption occurs by writing after the end of the object then it
 may be advisable to enable a Redzone to avoid corrupting the beginning
 of other objects.

 	slub_debug=FZ,dentry

 Christoph Lameter, May 30, 2007
	Short users guide for SLUB
	--------------------------

	The basic philosophy of SLUB is very different from SLAB. SLAB
	requires rebuilding the kernel to activate debug options for all
	slab caches. SLUB always includes full debugging but it is off by default.
	SLUB can enable debugging only for selected slabs in order to avoid
	an impact on overall system performance which may make a bug more
	difficult to find.

	In order to switch debugging on one can add a option "slub_debug"
	to the kernel command line. That will enable full debugging for
	all slabs.

	Typically one would then use the "slabinfo" command to get statistical
	data and perform operation on the slabs. By default slabinfo only lists
	slabs that have data in them. See "slabinfo -h" for more options when
	running the command. slabinfo can be compiled with

	gcc -o slabinfo Documentation/vm/slabinfo.c

	Some of the modes of operation of slabinfo require that slub debugging
	be enabled on the command line. F.e. no tracking information will be
	available without debugging on and validation can only partially
	be performed if debugging was not switched on.

	Some more sophisticated uses of slub_debug:
	-------------------------------------------

	Parameters may be given to slub_debug. If none is specified then full
	debugging is enabled. Format:

	slub_debug=<Debug-Options> Enable options for all slabs
	slub_debug=<Debug-Options>,<slab name>
	Enable options only for select slabs

	Possible debug options are
	F Sanity checks on (enables SLAB_DEBUG_FREE. Sorry
	SLAB legacy issues)
	Z Red zoning
	P Poisoning (object and padding)
	U User tracking (free and alloc)
	T Trace (please only use on single slabs)
	A Toggle failslab filter mark for the cache
	O Switch debugging off for caches that would have
	caused higher minimum slab orders
	- Switch all debugging off (useful if the kernel is
	configured with CONFIG_SLUB_DEBUG_ON)

	F.e. in order to boot just with sanity checks and red zoning one would specify:

	slub_debug=FZ

	Trying to find an issue in the dentry cache? Try

	slub_debug=,dentry

	to only enable debugging on the dentry cache.

	Red zoning and tracking may realign the slab. We can just apply sanity checks
	to the dentry cache with

	slub_debug=F,dentry

	Debugging options may require the minimum possible slab order to increase as
	a result of storing the metadata (for example, caches with PAGE_SIZE object
	sizes). This has a higher liklihood of resulting in slab allocation errors
	in low memory situations or if there's high fragmentation of memory. To
	switch off debugging for such caches by default, use

	slub_debug=O

	In case you forgot to enable debugging on the kernel command line: It is
	possible to enable debugging manually when the kernel is up. Look at the
	contents of:

	/sys/kernel/slab/<slab name>/

	Look at the writable files. Writing 1 to them will enable the
	corresponding debug option. All options can be set on a slab that does
	not contain objects. If the slab already contains objects then sanity checks
	and tracing may only be enabled. The other options may cause the realignment
	of objects.

	Careful with tracing: It may spew out lots of information and never stop if
	used on the wrong slab.

	Slab merging
	------------

	If no debug options are specified then SLUB may merge similar slabs together
	in order to reduce overhead and increase cache hotness of objects.
	slabinfo -a displays which slabs were merged together.

	Slab validation
	---------------

	SLUB can validate all object if the kernel was booted with slub_debug. In
	order to do so you must have the slabinfo tool. Then you can do

	slabinfo -v

	which will test all objects. Output will be generated to the syslog.

	This also works in a more limited way if boot was without slab debug.
	In that case slabinfo -v simply tests all reachable objects. Usually
	these are in the cpu slabs and the partial slabs. Full slabs are not
	tracked by SLUB in a non debug situation.

	Getting more performance
	------------------------

	To some degree SLUB's performance is limited by the need to take the
	list_lock once in a while to deal with partial slabs. That overhead is
	governed by the order of the allocation for each slab. The allocations
	can be influenced by kernel parameters:

	slub_min_objects=x (default 4)
	slub_min_order=x (default 0)
	slub_max_order=x (default 1)

	slub_min_objects allows to specify how many objects must at least fit
	into one slab in order for the allocation order to be acceptable.
	In general slub will be able to perform this number of allocations
	on a slab without consulting centralized resources (list_lock) where
	contention may occur.

	slub_min_order specifies a minim order of slabs. A similar effect like
	slub_min_objects.

	slub_max_order specified the order at which slub_min_objects should no
	longer be checked. This is useful to avoid SLUB trying to generate
	super large order pages to fit slub_min_objects of a slab cache with
	large object sizes into one high order page.

	SLUB Debug output
	-----------------

	Here is a sample of slub debug output:

	====================================================================
	BUG kmalloc-8: Redzone overwritten
	--------------------------------------------------------------------

	INFO: 0xc90f6d28-0xc90f6d2b. First byte 0x00 instead of 0xcc
	INFO: Slab 0xc528c530 flags=0x400000c3 inuse=61 fp=0xc90f6d58
	INFO: Object 0xc90f6d20 @offset=3360 fp=0xc90f6d58
	INFO: Allocated in get_modalias+0x61/0xf5 age=53 cpu=1 pid=554

	Bytes b4 0xc90f6d10: 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
	Object 0xc90f6d20: 31 30 31 39 2e 30 30 35 1019.005
	Redzone 0xc90f6d28: 00 cc cc cc .
	Padding 0xc90f6d50: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ

	[<c010523d>] dump_trace+0x63/0x1eb
	[<c01053df>] show_trace_log_lvl+0x1a/0x2f
	[<c010601d>] show_trace+0x12/0x14
	[<c0106035>] dump_stack+0x16/0x18
	[<c017e0fa>] object_err+0x143/0x14b
	[<c017e2cc>] check_object+0x66/0x234
	[<c017eb43>] __slab_free+0x239/0x384
	[<c017f446>] kfree+0xa6/0xc6
	[<c02e2335>] get_modalias+0xb9/0xf5
	[<c02e23b7>] dmi_dev_uevent+0x27/0x3c
	[<c027866a>] dev_uevent+0x1ad/0x1da
	[<c0205024>] kobject_uevent_env+0x20a/0x45b
	[<c020527f>] kobject_uevent+0xa/0xf
	[<c02779f1>] store_uevent+0x4f/0x58
	[<c027758e>] dev_attr_store+0x29/0x2f
	[<c01bec4f>] sysfs_write_file+0x16e/0x19c
	[<c0183ba7>] vfs_write+0xd1/0x15a
	[<c01841d7>] sys_write+0x3d/0x72
	[<c0104112>] sysenter_past_esp+0x5f/0x99
	[<b7f7b410>] 0xb7f7b410
	=======================

	FIX kmalloc-8: Restoring Redzone 0xc90f6d28-0xc90f6d2b=0xcc

	If SLUB encounters a corrupted object (full detection requires the kernel
	to be booted with slub_debug) then the following output will be dumped
	into the syslog:

	1. Description of the problem encountered

	This will be a message in the system log starting with

	===============================================
	BUG <slab cache affected>: <What went wrong>
	-----------------------------------------------

	INFO: <corruption start>-<corruption_end> <more info>
	INFO: Slab <address> <slab information>
	INFO: Object <address> <object information>
	INFO: Allocated in <kernel function> age=<jiffies since alloc> cpu=<allocated by
	cpu> pid=<pid of the process>
	INFO: Freed in <kernel function> age=<jiffies since free> cpu=<freed by cpu>
	pid=<pid of the process>

	(Object allocation / free information is only available if SLAB_STORE_USER is
	set for the slab. slub_debug sets that option)

	2. The object contents if an object was involved.

	Various types of lines can follow the BUG SLUB line:

	Bytes b4 <address> : <bytes>
	Shows a few bytes before the object where the problem was detected.
	Can be useful if the corruption does not stop with the start of the
	object.

	Object <address> : <bytes>
	The bytes of the object. If the object is inactive then the bytes
	typically contain poison values. Any non-poison value shows a
	corruption by a write after free.

	Redzone <address> : <bytes>
	The Redzone following the object. The Redzone is used to detect
	writes after the object. All bytes should always have the same
	value. If there is any deviation then it is due to a write after
	the object boundary.

	(Redzone information is only available if SLAB_RED_ZONE is set.
	slub_debug sets that option)

	Padding <address> : <bytes>
	Unused data to fill up the space in order to get the next object
	properly aligned. In the debug case we make sure that there are
	at least 4 bytes of padding. This allows the detection of writes
	before the object.

	3. A stackdump

	The stackdump describes the location where the error was detected. The cause
	of the corruption is may be more likely found by looking at the function that
	allocated or freed the object.

	4. Report on how the problem was dealt with in order to ensure the continued
	operation of the system.

	These are messages in the system log beginning with

	FIX <slab cache affected>: <corrective action taken>

	In the above sample SLUB found that the Redzone of an active object has
	been overwritten. Here a string of 8 characters was written into a slab that
	has the length of 8 characters. However, a 8 character string needs a
	terminating 0. That zero has overwritten the first byte of the Redzone field.
	After reporting the details of the issue encountered the FIX SLUB message
	tells us that SLUB has restored the Redzone to its proper value and then
	system operations continue.

	Emergency operations:
	---------------------

	Minimal debugging (sanity checks alone) can be enabled by booting with

	slub_debug=F

	This will be generally be enough to enable the resiliency features of slub
	which will keep the system running even if a bad kernel component will
	keep corrupting objects. This may be important for production systems.
	Performance will be impacted by the sanity checks and there will be a
	continual stream of error messages to the syslog but no additional memory
	will be used (unlike full debugging).

	No guarantees. The kernel component still needs to be fixed. Performance
	may be optimized further by locating the slab that experiences corruption
	and enabling debugging only for that cache

	I.e.

	slub_debug=F,dentry

	If the corruption occurs by writing after the end of the object then it
	may be advisable to enable a Redzone to avoid corrupting the beginning
	of other objects.

	slub_debug=FZ,dentry

	Christoph Lameter, May 30, 2007