mfd: retu: Add Tahvo support
Tahvo is a multi-function device on Nokia 770, implementing USB
transceiver and charge/battery control.
It's so close to Retu that a single driver can support both.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/drivers/mfd/retu-mfd.c b/drivers/mfd/retu-mfd.c
index 3ba0486..a183098 100644
--- a/drivers/mfd/retu-mfd.c
+++ b/drivers/mfd/retu-mfd.c
@@ -1,5 +1,5 @@
/*
- * Retu MFD driver
+ * Retu/Tahvo MFD driver
*
* Copyright (C) 2004, 2005 Nokia Corporation
*
@@ -33,7 +33,8 @@
#define RETU_REG_ASICR 0x00 /* ASIC ID and revision */
#define RETU_REG_ASICR_VILMA (1 << 7) /* Bit indicating Vilma */
#define RETU_REG_IDR 0x01 /* Interrupt ID */
-#define RETU_REG_IMR 0x02 /* Interrupt mask */
+#define RETU_REG_IMR 0x02 /* Interrupt mask (Retu) */
+#define TAHVO_REG_IMR 0x03 /* Interrupt mask (Tahvo) */
/* Interrupt sources */
#define RETU_INT_PWR 0 /* Power button */
@@ -84,6 +85,62 @@
/* Retu device registered for the power off. */
static struct retu_dev *retu_pm_power_off;
+static struct resource tahvo_usb_res[] = {
+ {
+ .name = "tahvo-usb",
+ .start = TAHVO_INT_VBUS,
+ .end = TAHVO_INT_VBUS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell tahvo_devs[] = {
+ {
+ .name = "tahvo-usb",
+ .resources = tahvo_usb_res,
+ .num_resources = ARRAY_SIZE(tahvo_usb_res),
+ },
+};
+
+static struct regmap_irq tahvo_irqs[] = {
+ [TAHVO_INT_VBUS] = {
+ .mask = 1 << TAHVO_INT_VBUS,
+ }
+};
+
+static struct regmap_irq_chip tahvo_irq_chip = {
+ .name = "TAHVO",
+ .irqs = tahvo_irqs,
+ .num_irqs = ARRAY_SIZE(tahvo_irqs),
+ .num_regs = 1,
+ .status_base = RETU_REG_IDR,
+ .mask_base = TAHVO_REG_IMR,
+ .ack_base = RETU_REG_IDR,
+};
+
+static const struct retu_data {
+ char *chip_name;
+ char *companion_name;
+ struct regmap_irq_chip *irq_chip;
+ struct mfd_cell *children;
+ int nchildren;
+} retu_data[] = {
+ [0] = {
+ .chip_name = "Retu",
+ .companion_name = "Vilma",
+ .irq_chip = &retu_irq_chip,
+ .children = retu_devs,
+ .nchildren = ARRAY_SIZE(retu_devs),
+ },
+ [1] = {
+ .chip_name = "Tahvo",
+ .companion_name = "Betty",
+ .irq_chip = &tahvo_irq_chip,
+ .children = tahvo_devs,
+ .nchildren = ARRAY_SIZE(tahvo_devs),
+ }
+};
+
int retu_read(struct retu_dev *rdev, u8 reg)
{
int ret;
@@ -173,9 +230,14 @@
static int retu_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
+ struct retu_data const *rdat;
struct retu_dev *rdev;
int ret;
+ if (i2c->addr > ARRAY_SIZE(retu_data))
+ return -ENODEV;
+ rdat = &retu_data[i2c->addr - 1];
+
rdev = devm_kzalloc(&i2c->dev, sizeof(*rdev), GFP_KERNEL);
if (rdev == NULL)
return -ENOMEM;
@@ -190,25 +252,27 @@
ret = retu_read(rdev, RETU_REG_ASICR);
if (ret < 0) {
- dev_err(rdev->dev, "could not read Retu revision: %d\n", ret);
+ dev_err(rdev->dev, "could not read %s revision: %d\n",
+ rdat->chip_name, ret);
return ret;
}
- dev_info(rdev->dev, "Retu%s v%d.%d found\n",
- (ret & RETU_REG_ASICR_VILMA) ? " & Vilma" : "",
+ dev_info(rdev->dev, "%s%s%s v%d.%d found\n", rdat->chip_name,
+ (ret & RETU_REG_ASICR_VILMA) ? " & " : "",
+ (ret & RETU_REG_ASICR_VILMA) ? rdat->companion_name : "",
(ret >> 4) & 0x7, ret & 0xf);
- /* Mask all RETU interrupts. */
- ret = retu_write(rdev, RETU_REG_IMR, 0xffff);
+ /* Mask all interrupts. */
+ ret = retu_write(rdev, rdat->irq_chip->mask_base, 0xffff);
if (ret < 0)
return ret;
ret = regmap_add_irq_chip(rdev->regmap, i2c->irq, IRQF_ONESHOT, -1,
- &retu_irq_chip, &rdev->irq_data);
+ rdat->irq_chip, &rdev->irq_data);
if (ret < 0)
return ret;
- ret = mfd_add_devices(rdev->dev, -1, retu_devs, ARRAY_SIZE(retu_devs),
+ ret = mfd_add_devices(rdev->dev, -1, rdat->children, rdat->nchildren,
NULL, regmap_irq_chip_get_base(rdev->irq_data),
NULL);
if (ret < 0) {
@@ -216,7 +280,7 @@
return ret;
}
- if (!pm_power_off) {
+ if (i2c->addr == 1 && !pm_power_off) {
retu_pm_power_off = rdev;
pm_power_off = retu_power_off;
}
@@ -240,6 +304,7 @@
static const struct i2c_device_id retu_id[] = {
{ "retu-mfd", 0 },
+ { "tahvo-mfd", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, retu_id);