[ARM] Fix SA110/SA1100 cache flushing
We had two implementations for flushing the cache, which meant StrongARM
caches weren't being correctly flushed. Fix this by always using the
v4wb_flush_kern_cache_all method, rather than duplicating it.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 41f21f2..777ad99 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -30,30 +30,6 @@
* the cache line size of the I and D cache
*/
#define DCACHELINESIZE 32
-#define FLUSH_OFFSET 32768
-
- .macro flush_1100_dcache rd, ra, re
- ldr \rd, =flush_base
- ldr \ra, [\rd]
- eor \ra, \ra, #FLUSH_OFFSET
- str \ra, [\rd]
- add \re, \ra, #8192 @ only necessary for 8k
-1001: ldr \rd, [\ra], #DCACHELINESIZE
- teq \re, \ra
- bne 1001b
-#ifdef FLUSH_BASE_MINICACHE
- add \ra, \ra, #FLUSH_BASE_MINICACHE - FLUSH_BASE
- add \re, \ra, #512 @ only 512 bytes
-1002: ldr \rd, [\ra], #DCACHELINESIZE
- teq \re, \ra
- bne 1002b
-#endif
- .endm
-
- .data
-flush_base:
- .long FLUSH_BASE
- .text
__INIT
@@ -79,9 +55,8 @@
stmfd sp!, {lr}
mov ip, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
msr cpsr_c, ip
- flush_1100_dcache r0, r1, r2 @ clean caches
- mov r0, #0
- mcr p15, 0, r0, c15, c2, 2 @ Disable clock switching
+ bl v4wb_flush_kern_cache_all
+ mcr p15, 0, ip, c15, c2, 2 @ Disable clock switching
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
@@ -167,14 +142,12 @@
*/
.align 5
ENTRY(cpu_sa1100_switch_mm)
- flush_1100_dcache r3, ip, r1
- mov ip, #0
- mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ str lr, [sp, #-4]!
+ bl v4wb_flush_kern_cache_all @ clears IP
mcr p15, 0, ip, c9, c0, 0 @ invalidate RB
- mcr p15, 0, ip, c7, c10, 4 @ drain WB
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
- mov pc, lr
+ ldr pc, [sp], #4
/*
* cpu_sa1100_set_pte(ptep, pte)