| /* |
| * For the TDA9875 chip |
| * (The TDA9875 is used on the Diamond DTV2000 french version |
| * Other cards probably use these chips as well.) |
| * This driver will not complain if used with any |
| * other i2c device with the same address. |
| * |
| * Copyright (c) 2000 Guillaume Delvit based on Gerd Knorr source and |
| * Eric Sandeen |
| * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org> |
| * This code is placed under the terms of the GNU General Public License |
| * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu) |
| * Which was based on tda8425.c by Greg Alexander (c) 1998 |
| * |
| * OPTIONS: |
| * debug - set to 1 if you'd like to see debug messages |
| * |
| * Revision: 0.1 - original version |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| #include <linux/videodev.h> |
| #include <media/v4l2-common.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| |
| |
| #include <media/i2c-addr.h> |
| |
| static int debug; /* insmod parameter */ |
| module_param(debug, int, S_IRUGO | S_IWUSR); |
| MODULE_LICENSE("GPL"); |
| |
| /* Addresses to scan */ |
| static unsigned short normal_i2c[] = { |
| I2C_ADDR_TDA9875 >> 1, |
| I2C_CLIENT_END |
| }; |
| I2C_CLIENT_INSMOD; |
| |
| /* This is a superset of the TDA9875 */ |
| struct tda9875 { |
| int rvol, lvol; |
| int bass, treble; |
| struct i2c_client c; |
| }; |
| |
| static struct i2c_driver driver; |
| static struct i2c_client client_template; |
| |
| #define dprintk if (debug) printk |
| |
| /* The TDA9875 is made by Philips Semiconductor |
| * http://www.semiconductors.philips.com |
| * TDA9875: I2C-bus controlled DSP audio processor, FM demodulator |
| * |
| */ |
| |
| /* subaddresses for TDA9875 */ |
| #define TDA9875_MUT 0x12 /*General mute (value --> 0b11001100*/ |
| #define TDA9875_CFG 0x01 /* Config register (value --> 0b00000000 */ |
| #define TDA9875_DACOS 0x13 /*DAC i/o select (ADC) 0b0000100*/ |
| #define TDA9875_LOSR 0x16 /*Line output select regirter 0b0100 0001*/ |
| |
| #define TDA9875_CH1V 0x0c /*Channel 1 volume (mute)*/ |
| #define TDA9875_CH2V 0x0d /*Channel 2 volume (mute)*/ |
| #define TDA9875_SC1 0x14 /*SCART 1 in (mono)*/ |
| #define TDA9875_SC2 0x15 /*SCART 2 in (mono)*/ |
| |
| #define TDA9875_ADCIS 0x17 /*ADC input select (mono) 0b0110 000*/ |
| #define TDA9875_AER 0x19 /*Audio effect (AVL+Pseudo) 0b0000 0110*/ |
| #define TDA9875_MCS 0x18 /*Main channel select (DAC) 0b0000100*/ |
| #define TDA9875_MVL 0x1a /* Main volume gauche */ |
| #define TDA9875_MVR 0x1b /* Main volume droite */ |
| #define TDA9875_MBA 0x1d /* Main Basse */ |
| #define TDA9875_MTR 0x1e /* Main treble */ |
| #define TDA9875_ACS 0x1f /* Auxilary channel select (FM) 0b0000000*/ |
| #define TDA9875_AVL 0x20 /* Auxilary volume gauche */ |
| #define TDA9875_AVR 0x21 /* Auxilary volume droite */ |
| #define TDA9875_ABA 0x22 /* Auxilary Basse */ |
| #define TDA9875_ATR 0x23 /* Auxilary treble */ |
| |
| #define TDA9875_MSR 0x02 /* Monitor select register */ |
| #define TDA9875_C1MSB 0x03 /* Carrier 1 (FM) frequency register MSB */ |
| #define TDA9875_C1MIB 0x04 /* Carrier 1 (FM) frequency register (16-8]b */ |
| #define TDA9875_C1LSB 0x05 /* Carrier 1 (FM) frequency register LSB */ |
| #define TDA9875_C2MSB 0x06 /* Carrier 2 (nicam) frequency register MSB */ |
| #define TDA9875_C2MIB 0x07 /* Carrier 2 (nicam) frequency register (16-8]b */ |
| #define TDA9875_C2LSB 0x08 /* Carrier 2 (nicam) frequency register LSB */ |
| #define TDA9875_DCR 0x09 /* Demodulateur configuration regirter*/ |
| #define TDA9875_DEEM 0x0a /* FM de-emphasis regirter*/ |
| #define TDA9875_FMAT 0x0b /* FM Matrix regirter*/ |
| |
| /* values */ |
| #define TDA9875_MUTE_ON 0xff /* general mute */ |
| #define TDA9875_MUTE_OFF 0xcc /* general no mute */ |
| |
| |
| |
| /* Begin code */ |
| |
| static int tda9875_write(struct i2c_client *client, int subaddr, unsigned char val) |
| { |
| unsigned char buffer[2]; |
| dprintk("In tda9875_write\n"); |
| dprintk("Writing %d 0x%x\n", subaddr, val); |
| buffer[0] = subaddr; |
| buffer[1] = val; |
| if (2 != i2c_master_send(client,buffer,2)) { |
| printk(KERN_WARNING "tda9875: I/O error, trying (write %d 0x%x)\n", |
| subaddr, val); |
| return -1; |
| } |
| return 0; |
| } |
| |
| |
| static int i2c_read_register(struct i2c_adapter *adap, int addr, int reg) |
| { |
| unsigned char write[1]; |
| unsigned char read[1]; |
| struct i2c_msg msgs[2] = { |
| { addr, 0, 1, write }, |
| { addr, I2C_M_RD, 1, read } |
| }; |
| write[0] = reg; |
| |
| if (2 != i2c_transfer(adap,msgs,2)) { |
| printk(KERN_WARNING "tda9875: I/O error (read2)\n"); |
| return -1; |
| } |
| dprintk("tda9875: chip_read2: reg%d=0x%x\n",reg,read[0]); |
| return read[0]; |
| } |
| |
| static void tda9875_set(struct i2c_client *client) |
| { |
| struct tda9875 *tda = i2c_get_clientdata(client); |
| unsigned char a; |
| |
| dprintk(KERN_DEBUG "tda9875_set(%04x,%04x,%04x,%04x)\n", |
| tda->lvol,tda->rvol,tda->bass,tda->treble); |
| |
| |
| a = tda->lvol & 0xff; |
| tda9875_write(client, TDA9875_MVL, a); |
| a =tda->rvol & 0xff; |
| tda9875_write(client, TDA9875_MVR, a); |
| a =tda->bass & 0xff; |
| tda9875_write(client, TDA9875_MBA, a); |
| a =tda->treble & 0xff; |
| tda9875_write(client, TDA9875_MTR, a); |
| } |
| |
| static void do_tda9875_init(struct i2c_client *client) |
| { |
| struct tda9875 *t = i2c_get_clientdata(client); |
| dprintk("In tda9875_init\n"); |
| tda9875_write(client, TDA9875_CFG, 0xd0 ); /*reg de config 0 (reset)*/ |
| tda9875_write(client, TDA9875_MSR, 0x03 ); /* Monitor 0b00000XXX*/ |
| tda9875_write(client, TDA9875_C1MSB, 0x00 ); /*Car1(FM) MSB XMHz*/ |
| tda9875_write(client, TDA9875_C1MIB, 0x00 ); /*Car1(FM) MIB XMHz*/ |
| tda9875_write(client, TDA9875_C1LSB, 0x00 ); /*Car1(FM) LSB XMHz*/ |
| tda9875_write(client, TDA9875_C2MSB, 0x00 ); /*Car2(NICAM) MSB XMHz*/ |
| tda9875_write(client, TDA9875_C2MIB, 0x00 ); /*Car2(NICAM) MIB XMHz*/ |
| tda9875_write(client, TDA9875_C2LSB, 0x00 ); /*Car2(NICAM) LSB XMHz*/ |
| tda9875_write(client, TDA9875_DCR, 0x00 ); /*Demod config 0x00*/ |
| tda9875_write(client, TDA9875_DEEM, 0x44 ); /*DE-Emph 0b0100 0100*/ |
| tda9875_write(client, TDA9875_FMAT, 0x00 ); /*FM Matrix reg 0x00*/ |
| tda9875_write(client, TDA9875_SC1, 0x00 ); /* SCART 1 (SC1)*/ |
| tda9875_write(client, TDA9875_SC2, 0x01 ); /* SCART 2 (sc2)*/ |
| |
| tda9875_write(client, TDA9875_CH1V, 0x10 ); /* Channel volume 1 mute*/ |
| tda9875_write(client, TDA9875_CH2V, 0x10 ); /* Channel volume 2 mute */ |
| tda9875_write(client, TDA9875_DACOS, 0x02 ); /* sig DAC i/o(in:nicam)*/ |
| tda9875_write(client, TDA9875_ADCIS, 0x6f ); /* sig ADC input(in:mono)*/ |
| tda9875_write(client, TDA9875_LOSR, 0x00 ); /* line out (in:mono)*/ |
| tda9875_write(client, TDA9875_AER, 0x00 ); /*06 Effect (AVL+PSEUDO) */ |
| tda9875_write(client, TDA9875_MCS, 0x44 ); /* Main ch select (DAC) */ |
| tda9875_write(client, TDA9875_MVL, 0x03 ); /* Vol Main left 10dB */ |
| tda9875_write(client, TDA9875_MVR, 0x03 ); /* Vol Main right 10dB*/ |
| tda9875_write(client, TDA9875_MBA, 0x00 ); /* Main Bass Main 0dB*/ |
| tda9875_write(client, TDA9875_MTR, 0x00 ); /* Main Treble Main 0dB*/ |
| tda9875_write(client, TDA9875_ACS, 0x44 ); /* Aux chan select (dac)*/ |
| tda9875_write(client, TDA9875_AVL, 0x00 ); /* Vol Aux left 0dB*/ |
| tda9875_write(client, TDA9875_AVR, 0x00 ); /* Vol Aux right 0dB*/ |
| tda9875_write(client, TDA9875_ABA, 0x00 ); /* Aux Bass Main 0dB*/ |
| tda9875_write(client, TDA9875_ATR, 0x00 ); /* Aux Aigus Main 0dB*/ |
| |
| tda9875_write(client, TDA9875_MUT, 0xcc ); /* General mute */ |
| |
| t->lvol=t->rvol =0; /* 0dB */ |
| t->bass=0; /* 0dB */ |
| t->treble=0; /* 0dB */ |
| tda9875_set(client); |
| |
| } |
| |
| |
| /* *********************** * |
| * i2c interface functions * |
| * *********************** */ |
| |
| static int tda9875_checkit(struct i2c_adapter *adap, int addr) |
| { |
| int dic,rev; |
| |
| dic=i2c_read_register(adap,addr,254); |
| rev=i2c_read_register(adap,addr,255); |
| |
| if(dic==0 || dic==2) { // tda9875 and tda9875A |
| printk("tda9875: TDA9875%s Rev.%d detected at 0x%x\n", |
| dic==0?"":"A", rev,addr<<1); |
| return 1; |
| } |
| printk("tda9875: no such chip at 0x%x (dic=0x%x rev=0x%x)\n",addr<<1,dic,rev); |
| return(0); |
| } |
| |
| static int tda9875_attach(struct i2c_adapter *adap, int addr, int kind) |
| { |
| struct tda9875 *t; |
| struct i2c_client *client; |
| dprintk("In tda9875_attach\n"); |
| |
| t = kzalloc(sizeof *t,GFP_KERNEL); |
| if (!t) |
| return -ENOMEM; |
| |
| client = &t->c; |
| memcpy(client,&client_template,sizeof(struct i2c_client)); |
| client->adapter = adap; |
| client->addr = addr; |
| i2c_set_clientdata(client, t); |
| |
| if(!tda9875_checkit(adap,addr)) { |
| kfree(t); |
| return 1; |
| } |
| |
| do_tda9875_init(client); |
| printk(KERN_INFO "tda9875: init\n"); |
| |
| i2c_attach_client(client); |
| return 0; |
| } |
| |
| static int tda9875_probe(struct i2c_adapter *adap) |
| { |
| if (adap->class & I2C_CLASS_TV_ANALOG) |
| return i2c_probe(adap, &addr_data, tda9875_attach); |
| return 0; |
| } |
| |
| static int tda9875_detach(struct i2c_client *client) |
| { |
| struct tda9875 *t = i2c_get_clientdata(client); |
| |
| do_tda9875_init(client); |
| i2c_detach_client(client); |
| |
| kfree(t); |
| return 0; |
| } |
| |
| static int tda9875_get_ctrl(struct i2c_client *client, |
| struct v4l2_control *ctrl) |
| { |
| struct tda9875 *t = i2c_get_clientdata(client); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_VOLUME: |
| { |
| int left = (t->lvol+84)*606; |
| int right = (t->rvol+84)*606; |
| |
| ctrl->value=max(left,right); |
| return 0; |
| } |
| case V4L2_CID_AUDIO_BALANCE: |
| { |
| int left = (t->lvol+84)*606; |
| int right = (t->rvol+84)*606; |
| int volume = max(left,right); |
| int balance = (32768*min(left,right))/ |
| (volume ? volume : 1); |
| ctrl->value=(left<right)? |
| (65535-balance) : balance; |
| return 0; |
| } |
| case V4L2_CID_AUDIO_BASS: |
| ctrl->value = (t->bass+12)*2427; /* min -12 max +15 */ |
| return 0; |
| case V4L2_CID_AUDIO_TREBLE: |
| ctrl->value = (t->treble+12)*2730;/* min -12 max +12 */ |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int tda9875_set_ctrl(struct i2c_client *client, |
| struct v4l2_control *ctrl) |
| { |
| struct tda9875 *t = i2c_get_clientdata(client); |
| int chvol=0, volume, balance, left, right; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_VOLUME: |
| left = (t->lvol+84)*606; |
| right = (t->rvol+84)*606; |
| |
| volume = max(left,right); |
| balance = (32768*min(left,right))/ |
| (volume ? volume : 1); |
| balance =(left<right)? |
| (65535-balance) : balance; |
| |
| volume = ctrl->value; |
| |
| chvol=1; |
| break; |
| case V4L2_CID_AUDIO_BALANCE: |
| left = (t->lvol+84)*606; |
| right = (t->rvol+84)*606; |
| |
| volume=max(left,right); |
| |
| balance = ctrl->value; |
| |
| chvol=1; |
| break; |
| case V4L2_CID_AUDIO_BASS: |
| t->bass = ((ctrl->value/2400)-12) & 0xff; |
| if (t->bass > 15) |
| t->bass = 15; |
| if (t->bass < -12) |
| t->bass = -12 & 0xff; |
| break; |
| case V4L2_CID_AUDIO_TREBLE: |
| t->treble = ((ctrl->value/2700)-12) & 0xff; |
| if (t->treble > 12) |
| t->treble = 12; |
| if (t->treble < -12) |
| t->treble = -12 & 0xff; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (chvol) { |
| left = (min(65536 - balance,32768) * |
| volume) / 32768; |
| right = (min(balance,32768) * |
| volume) / 32768; |
| t->lvol = ((left/606)-84) & 0xff; |
| if (t->lvol > 24) |
| t->lvol = 24; |
| if (t->lvol < -84) |
| t->lvol = -84 & 0xff; |
| |
| t->rvol = ((right/606)-84) & 0xff; |
| if (t->rvol > 24) |
| t->rvol = 24; |
| if (t->rvol < -84) |
| t->rvol = -84 & 0xff; |
| } |
| |
| //printk("tda9875 bal:%04x vol:%04x bass:%04x treble:%04x\n",va->balance,va->volume,va->bass,va->treble); |
| |
| tda9875_set(client); |
| |
| return 0; |
| } |
| |
| |
| static int tda9875_command(struct i2c_client *client, |
| unsigned int cmd, void *arg) |
| { |
| dprintk("In tda9875_command...\n"); |
| |
| switch (cmd) { |
| /* --- v4l ioctls --- */ |
| /* take care: bttv does userspace copying, we'll get a |
| kernel pointer here... */ |
| case VIDIOC_QUERYCTRL: |
| { |
| struct v4l2_queryctrl *qc = arg; |
| |
| switch (qc->id) { |
| case V4L2_CID_AUDIO_VOLUME: |
| case V4L2_CID_AUDIO_BASS: |
| case V4L2_CID_AUDIO_TREBLE: |
| default: |
| return -EINVAL; |
| } |
| return v4l2_ctrl_query_fill_std(qc); |
| } |
| case VIDIOC_S_CTRL: |
| return tda9875_set_ctrl(client, arg); |
| |
| case VIDIOC_G_CTRL: |
| return tda9875_get_ctrl(client, arg); |
| |
| default: /* Not VIDEOCGAUDIO or VIDEOCSAUDIO */ |
| |
| /* nothing */ |
| dprintk("Default\n"); |
| |
| } /* end of (cmd) switch */ |
| |
| return 0; |
| } |
| |
| |
| static struct i2c_driver driver = { |
| .driver = { |
| .name = "tda9875", |
| }, |
| .id = I2C_DRIVERID_TDA9875, |
| .attach_adapter = tda9875_probe, |
| .detach_client = tda9875_detach, |
| .command = tda9875_command, |
| }; |
| |
| static struct i2c_client client_template = |
| { |
| .name = "tda9875", |
| .driver = &driver, |
| }; |
| |
| static int __init tda9875_init(void) |
| { |
| return i2c_add_driver(&driver); |
| } |
| |
| static void __exit tda9875_fini(void) |
| { |
| i2c_del_driver(&driver); |
| } |
| |
| module_init(tda9875_init); |
| module_exit(tda9875_fini); |
| |
| /* |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |
| |