pata_it821x: Driver updates and reworking
- Add support for the RDC 1010 variant
- Rework the core library to have a read_id method. This allows the hacky
bits of it821x to go and prepares us for pata_hd
- Switch from WARN to BUG in ata_id_string as it will reboot if you get
it wrong so WARN won't be seen
- Allow the issue of command 0xFC on the 821x. This is needed to query
rebuild status.
- Tidy up printk formatting
- Do more ident rewriting on RAID volumes to handle firmware provided
ident data which is rather wonky
- Report the firmware revision and device layout in RAID mode
- Don't try and disable raid on the 8211 or RDC - they don't have the
relevant bits
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index e108169..27843c7 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -80,7 +80,7 @@
#define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.3.8"
+#define DRV_VERSION "0.4.0"
struct it821x_dev
{
@@ -425,6 +425,8 @@
case ATA_CMD_WRITE_MULTI:
case ATA_CMD_WRITE_MULTI_EXT:
case ATA_CMD_ID_ATA:
+ case ATA_CMD_INIT_DEV_PARAMS:
+ case 0xFC: /* Internal 'report rebuild state' */
/* Arguably should just no-op this one */
case ATA_CMD_SET_FEATURES:
return ata_sff_qc_issue(qc);
@@ -509,7 +511,7 @@
if (strstr(model_num, "Integrated Technology Express")) {
/* RAID mode */
- printk(KERN_INFO "IT821x %sRAID%d volume",
+ ata_dev_printk(adev, KERN_INFO, "%sRAID%d volume",
adev->id[147]?"Bootable ":"",
adev->id[129]);
if (adev->id[129] != 1)
@@ -519,36 +521,50 @@
/* This is a controller firmware triggered funny, don't
report the drive faulty! */
adev->horkage &= ~ATA_HORKAGE_DIAGNOSTIC;
+ /* No HPA in 'smart' mode */
+ adev->horkage |= ATA_HORKAGE_BROKEN_HPA;
}
/**
- * it821x_ident_hack - Hack identify data up
- * @ap: Port
+ * it821x_read_id - Hack identify data up
+ * @adev: device to read
+ * @tf: proposed taskfile
+ * @id: buffer for returned ident data
*
- * Walk the devices on this firmware driven port and slightly
+ * Query the devices on this firmware driven port and slightly
* mash the identify data to stop us and common tools trying to
* use features not firmware supported. The firmware itself does
* some masking (eg SMART) but not enough.
- *
- * This is a bit of an abuse of the cable method, but it is the
- * only method called at the right time. We could modify the libata
- * core specifically for ident hacking but while we have one offender
- * it seems better to keep the fallout localised.
*/
-static int it821x_ident_hack(struct ata_port *ap)
+static unsigned int it821x_read_id(struct ata_device *adev,
+ struct ata_taskfile *tf, u16 *id)
{
- struct ata_device *adev;
- ata_link_for_each_dev(adev, &ap->link) {
- if (ata_dev_enabled(adev)) {
- adev->id[84] &= ~(1 << 6); /* No FUA */
- adev->id[85] &= ~(1 << 10); /* No HPA */
- adev->id[76] = 0; /* No NCQ/AN etc */
- }
- }
- return ata_cable_unknown(ap);
-}
+ unsigned int err_mask;
+ unsigned char model_num[ATA_ID_PROD_LEN + 1];
+ err_mask = ata_do_dev_read_id(adev, tf, id);
+ if (err_mask)
+ return err_mask;
+ ata_id_c_string(id, model_num, ATA_ID_PROD, sizeof(model_num));
+
+ id[83] &= ~(1 << 12); /* Cache flush is firmware handled */
+ id[83] &= ~(1 << 13); /* Ditto for LBA48 flushes */
+ id[84] &= ~(1 << 6); /* No FUA */
+ id[85] &= ~(1 << 10); /* No HPA */
+ id[76] = 0; /* No NCQ/AN etc */
+
+ if (strstr(model_num, "Integrated Technology Express")) {
+ /* Set feature bits the firmware neglects */
+ id[49] |= 0x0300; /* LBA, DMA */
+ id[82] |= 0x0400; /* LBA48 */
+ id[83] &= 0x7FFF;
+ id[83] |= 0x4000; /* Word 83 is valid */
+ id[86] |= 0x0400; /* LBA48 on */
+ id[ATA_ID_MAJOR_VER] |= 0x1F;
+ }
+ return err_mask;
+}
/**
* it821x_check_atapi_dma - ATAPI DMA handler
@@ -577,6 +593,136 @@
return 0;
}
+/**
+ * it821x_display_disk - display disk setup
+ * @n: Device number
+ * @buf: Buffer block from firmware
+ *
+ * Produce a nice informative display of the device setup as provided
+ * by the firmware.
+ */
+
+static void it821x_display_disk(int n, u8 *buf)
+{
+ unsigned char id[41];
+ int mode = 0;
+ char *mtype;
+ char mbuf[8];
+ char *cbl = "(40 wire cable)";
+
+ static const char *types[5] = {
+ "RAID0", "RAID1" "RAID 0+1", "JBOD", "DISK"
+ };
+
+ if (buf[52] > 4) /* No Disk */
+ return;
+
+ ata_id_c_string((u16 *)buf, id, 0, 41);
+
+ if (buf[51]) {
+ mode = ffs(buf[51]);
+ mtype = "UDMA";
+ } else if (buf[49]) {
+ mode = ffs(buf[49]);
+ mtype = "MWDMA";
+ }
+
+ if (buf[76])
+ cbl = "";
+
+ if (mode)
+ snprintf(mbuf, 8, "%5s%d", mtype, mode - 1);
+ else
+ strcpy(mbuf, "PIO");
+ if (buf[52] == 4)
+ printk(KERN_INFO "%d: %-6s %-8s %s %s\n",
+ n, mbuf, types[buf[52]], id, cbl);
+ else
+ printk(KERN_INFO "%d: %-6s %-8s Volume: %1d %s %s\n",
+ n, mbuf, types[buf[52]], buf[53], id, cbl);
+ if (buf[125] < 100)
+ printk(KERN_INFO "%d: Rebuilding: %d%%\n", n, buf[125]);
+}
+
+/**
+ * it821x_firmware_command - issue firmware command
+ * @ap: IT821x port to interrogate
+ * @cmd: command
+ * @len: length
+ *
+ * Issue firmware commands expecting data back from the controller. We
+ * use this to issue commands that do not go via the normal paths. Other
+ * commands such as 0xFC can be issued normally.
+ */
+
+static u8 *it821x_firmware_command(struct ata_port *ap, u8 cmd, int len)
+{
+ u8 status;
+ int n = 0;
+ u16 *buf = kmalloc(len, GFP_KERNEL);
+ if (buf == NULL) {
+ printk(KERN_ERR "it821x_firmware_command: Out of memory\n");
+ return NULL;
+ }
+ /* This isn't quite a normal ATA command as we are talking to the
+ firmware not the drives */
+ ap->ctl |= ATA_NIEN;
+ iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+ ata_wait_idle(ap);
+ iowrite8(ATA_DEVICE_OBS, ap->ioaddr.device_addr);
+ iowrite8(cmd, ap->ioaddr.command_addr);
+ udelay(1);
+ /* This should be almost immediate but a little paranoia goes a long
+ way. */
+ while(n++ < 10) {
+ status = ioread8(ap->ioaddr.status_addr);
+ if (status & ATA_ERR) {
+ kfree(buf);
+ printk(KERN_ERR "it821x_firmware_command: rejected\n");
+ return NULL;
+ }
+ if (status & ATA_DRQ) {
+ ioread16_rep(ap->ioaddr.data_addr, buf, len/2);
+ return (u8 *)buf;
+ }
+ mdelay(1);
+ }
+ kfree(buf);
+ printk(KERN_ERR "it821x_firmware_command: timeout\n");
+ return NULL;
+}
+
+/**
+ * it821x_probe_firmware - firmware reporting/setup
+ * @ap: IT821x port being probed
+ *
+ * Probe the firmware of the controller by issuing firmware command
+ * 0xFA and analysing the returned data.
+ */
+
+static void it821x_probe_firmware(struct ata_port *ap)
+{
+ u8 *buf;
+ int i;
+
+ /* This is a bit ugly as we can't just issue a task file to a device
+ as this is controller magic */
+
+ buf = it821x_firmware_command(ap, 0xFA, 512);
+
+ if (buf != NULL) {
+ printk(KERN_INFO "pata_it821x: Firmware %02X/%02X/%02X%02X\n",
+ buf[505],
+ buf[506],
+ buf[507],
+ buf[508]);
+ for (i = 0; i < 4; i++)
+ it821x_display_disk(i, buf + 128 * i);
+ kfree(buf);
+ }
+}
+
+
/**
* it821x_port_start - port setup
@@ -610,6 +756,8 @@
/* Long I/O's although allowed in LBA48 space cause the
onboard firmware to enter the twighlight zone */
/* No ATAPI DMA in this mode either */
+ if (ap->port_no == 0)
+ it821x_probe_firmware(ap);
}
/* Pull the current clocks from 0x50 */
if (conf & (1 << (1 + ap->port_no)))
@@ -631,6 +779,25 @@
return 0;
}
+/**
+ * it821x_rdc_cable - Cable detect for RDC1010
+ * @ap: port we are checking
+ *
+ * Return the RDC1010 cable type. Unlike the IT821x we know how to do
+ * this and can do host side cable detect
+ */
+
+static int it821x_rdc_cable(struct ata_port *ap)
+{
+ u16 r40;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ pci_read_config_word(pdev, 0x40, &r40);
+ if (r40 & (1 << (2 + ap->port_no)))
+ return ATA_CBL_PATA40;
+ return ATA_CBL_PATA80;
+}
+
static struct scsi_host_template it821x_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
@@ -641,9 +808,10 @@
.check_atapi_dma= it821x_check_atapi_dma,
.qc_issue = it821x_smart_qc_issue,
- .cable_detect = it821x_ident_hack,
+ .cable_detect = ata_cable_80wire,
.set_mode = it821x_smart_set_mode,
.dev_config = it821x_dev_config,
+ .read_id = it821x_read_id,
.port_start = it821x_port_start,
};
@@ -664,8 +832,29 @@
.port_start = it821x_port_start,
};
+static struct ata_port_operations it821x_rdc_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+
+ .check_atapi_dma= it821x_check_atapi_dma,
+ .sff_dev_select = it821x_passthru_dev_select,
+ .bmdma_start = it821x_passthru_bmdma_start,
+ .bmdma_stop = it821x_passthru_bmdma_stop,
+ .qc_issue = it821x_passthru_qc_issue,
+
+ .cable_detect = it821x_rdc_cable,
+ .set_piomode = it821x_passthru_set_piomode,
+ .set_dmamode = it821x_passthru_set_dmamode,
+
+ .port_start = it821x_port_start,
+};
+
static void it821x_disable_raid(struct pci_dev *pdev)
{
+ /* Neither the RDC nor the IT8211 */
+ if (pdev->vendor != PCI_VENDOR_ID_ITE ||
+ pdev->device != PCI_DEVICE_ID_ITE_8212)
+ return;
+
/* Reset local CPU, and set BIOS not ready */
pci_write_config_byte(pdev, 0x5E, 0x01);
@@ -690,6 +879,7 @@
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA6,
.port_ops = &it821x_smart_port_ops
};
static const struct ata_port_info info_passthru = {
@@ -699,6 +889,13 @@
.udma_mask = ATA_UDMA6,
.port_ops = &it821x_passthru_port_ops
};
+ static const struct ata_port_info info_rdc = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ /* No UDMA */
+ .port_ops = &it821x_rdc_port_ops
+ };
const struct ata_port_info *ppi[] = { NULL, NULL };
static char *mode[2] = { "pass through", "smart" };
@@ -707,21 +904,25 @@
rc = pcim_enable_device(pdev);
if (rc)
return rc;
+
+ if (pdev->vendor == PCI_VENDOR_ID_RDC) {
+ ppi[0] = &info_rdc;
+ } else {
+ /* Force the card into bypass mode if so requested */
+ if (it8212_noraid) {
+ printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n");
+ it821x_disable_raid(pdev);
+ }
+ pci_read_config_byte(pdev, 0x50, &conf);
+ conf &= 1;
- /* Force the card into bypass mode if so requested */
- if (it8212_noraid) {
- printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n");
- it821x_disable_raid(pdev);
+ printk(KERN_INFO DRV_NAME": controller in %s mode.\n",
+ mode[conf]);
+ if (conf == 0)
+ ppi[0] = &info_passthru;
+ else
+ ppi[0] = &info_smart;
}
- pci_read_config_byte(pdev, 0x50, &conf);
- conf &= 1;
-
- printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]);
- if (conf == 0)
- ppi[0] = &info_passthru;
- else
- ppi[0] = &info_smart;
-
return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL);
}
@@ -745,6 +946,7 @@
static const struct pci_device_id it821x[] = {
{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), },
{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), },
+ { PCI_VDEVICE(RDC, 0x1010), },
{ },
};