libata: reimplement suspend/resume support using sdev->manage_start_stop
Reimplement suspend/resume support using sdev->manage_start_stop.
* Device suspend/resume is now SCSI layer's responsibility and the
code is simplified a lot.
* DPM is dropped. This also simplifies code a lot. Suspend/resume
status is port-wide now.
* ata_scsi_device_suspend/resume() and ata_dev_ready() removed.
* Resume now has to wait for disk to spin up before proceeding. I
couldn't find easy way out as libata is in EH waiting for the
disk to be ready and sd is waiting for EH to complete to issue
START_STOP.
* sdev->manage_start_stop is set to 1 in ata_scsi_slave_config().
This fixes spindown on shutdown and suspend-to-disk.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 8256655..412d604 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -77,29 +77,12 @@
#ifdef CONFIG_PM
static void ata_eh_handle_port_suspend(struct ata_port *ap);
static void ata_eh_handle_port_resume(struct ata_port *ap);
-static int ata_eh_suspend(struct ata_port *ap,
- struct ata_device **r_failed_dev);
-static void ata_eh_prep_resume(struct ata_port *ap);
-static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev);
#else /* CONFIG_PM */
static void ata_eh_handle_port_suspend(struct ata_port *ap)
{ }
static void ata_eh_handle_port_resume(struct ata_port *ap)
{ }
-
-static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
- return 0;
-}
-
-static void ata_eh_prep_resume(struct ata_port *ap)
-{ }
-
-static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
- return 0;
-}
#endif /* CONFIG_PM */
static void ata_ering_record(struct ata_ering *ering, int is_io,
@@ -1791,7 +1774,7 @@
if (ehc->i.flags & ATA_EHI_DID_RESET)
readid_flags |= ATA_READID_POSTRESET;
- if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) {
+ if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) {
if (ata_port_offline(ap)) {
rc = -EIO;
goto err;
@@ -1872,166 +1855,6 @@
return rc;
}
-#ifdef CONFIG_PM
-/**
- * ata_eh_suspend - handle suspend EH action
- * @ap: target host port
- * @r_failed_dev: result parameter to indicate failing device
- *
- * Handle suspend EH action. Disk devices are spinned down and
- * other types of devices are just marked suspended. Once
- * suspended, no EH action to the device is allowed until it is
- * resumed.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise
- */
-static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
- struct ata_device *dev;
- int i, rc = 0;
-
- DPRINTK("ENTER\n");
-
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- unsigned long flags;
- unsigned int action, err_mask;
-
- dev = &ap->device[i];
- action = ata_eh_dev_action(dev);
-
- if (!ata_dev_enabled(dev) || !(action & ATA_EH_SUSPEND))
- continue;
-
- WARN_ON(dev->flags & ATA_DFLAG_SUSPENDED);
-
- ata_eh_about_to_do(ap, dev, ATA_EH_SUSPEND);
-
- if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) {
- /* flush cache */
- rc = ata_flush_cache(dev);
- if (rc)
- break;
-
- /* spin down */
- err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1);
- if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to "
- "spin down (err_mask=0x%x)\n",
- err_mask);
- rc = -EIO;
- break;
- }
- }
-
- spin_lock_irqsave(ap->lock, flags);
- dev->flags |= ATA_DFLAG_SUSPENDED;
- spin_unlock_irqrestore(ap->lock, flags);
-
- ata_eh_done(ap, dev, ATA_EH_SUSPEND);
- }
-
- if (rc)
- *r_failed_dev = dev;
-
- DPRINTK("EXIT\n");
- return rc;
-}
-
-/**
- * ata_eh_prep_resume - prep for resume EH action
- * @ap: target host port
- *
- * Clear SUSPENDED in preparation for scheduled resume actions.
- * This allows other parts of EH to access the devices being
- * resumed.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- */
-static void ata_eh_prep_resume(struct ata_port *ap)
-{
- struct ata_device *dev;
- unsigned long flags;
- int i;
-
- DPRINTK("ENTER\n");
-
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- unsigned int action;
-
- dev = &ap->device[i];
- action = ata_eh_dev_action(dev);
-
- if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME))
- continue;
-
- spin_lock_irqsave(ap->lock, flags);
- dev->flags &= ~ATA_DFLAG_SUSPENDED;
- spin_unlock_irqrestore(ap->lock, flags);
- }
-
- DPRINTK("EXIT\n");
-}
-
-/**
- * ata_eh_resume - handle resume EH action
- * @ap: target host port
- * @r_failed_dev: result parameter to indicate failing device
- *
- * Handle resume EH action. Target devices are already reset and
- * revalidated. Spinning up is the only operation left.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise
- */
-static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
- struct ata_device *dev;
- int i, rc = 0;
-
- DPRINTK("ENTER\n");
-
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- unsigned int action, err_mask;
-
- dev = &ap->device[i];
- action = ata_eh_dev_action(dev);
-
- if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME))
- continue;
-
- ata_eh_about_to_do(ap, dev, ATA_EH_RESUME);
-
- if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) {
- err_mask = ata_do_simple_cmd(dev,
- ATA_CMD_IDLEIMMEDIATE);
- if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to "
- "spin up (err_mask=0x%x)\n",
- err_mask);
- rc = -EIO;
- break;
- }
- }
-
- ata_eh_done(ap, dev, ATA_EH_RESUME);
- }
-
- if (rc)
- *r_failed_dev = dev;
-
- DPRINTK("EXIT\n");
- return 0;
-}
-#endif /* CONFIG_PM */
-
static int ata_port_nr_enabled(struct ata_port *ap)
{
int i, cnt = 0;
@@ -2057,17 +1880,6 @@
struct ata_eh_context *ehc = &ap->eh_context;
int i;
- /* skip if all possible devices are suspended */
- for (i = 0; i < ata_port_max_devices(ap); i++) {
- struct ata_device *dev = &ap->device[i];
-
- if (!(dev->flags & ATA_DFLAG_SUSPENDED))
- break;
- }
-
- if (i == ata_port_max_devices(ap))
- return 1;
-
/* thaw frozen port, resume link and recover failed devices */
if ((ap->pflags & ATA_PFLAG_FROZEN) ||
(ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_port_nr_enabled(ap))
@@ -2147,9 +1959,6 @@
if (ap->pflags & ATA_PFLAG_UNLOADING)
goto out;
- /* prep for resume */
- ata_eh_prep_resume(ap);
-
/* skip EH if possible. */
if (ata_eh_skip_recovery(ap))
ehc->i.action = 0;
@@ -2177,11 +1986,6 @@
if (rc)
goto dev_fail;
- /* resume devices */
- rc = ata_eh_resume(ap, &dev);
- if (rc)
- goto dev_fail;
-
/* configure transfer mode if necessary */
if (ehc->i.flags & ATA_EHI_SETMODE) {
rc = ata_set_mode(ap, &dev);
@@ -2190,11 +1994,6 @@
ehc->i.flags &= ~ATA_EHI_SETMODE;
}
- /* suspend devices */
- rc = ata_eh_suspend(ap, &dev);
- if (rc)
- goto dev_fail;
-
goto out;
dev_fail:
@@ -2390,22 +2189,13 @@
*
* Resume @ap.
*
- * This function also waits upto one second until all devices
- * hanging off this port requests resume EH action. This is to
- * prevent invoking EH and thus reset multiple times on resume.
- *
- * On DPM resume, where some of devices might not be resumed
- * together, this may delay port resume upto one second, but such
- * DPM resumes are rare and 1 sec delay isn't too bad.
- *
* LOCKING:
* Kernel thread context (may sleep).
*/
static void ata_eh_handle_port_resume(struct ata_port *ap)
{
- unsigned long timeout;
unsigned long flags;
- int i, rc = 0;
+ int rc = 0;
/* are we resuming? */
spin_lock_irqsave(ap->lock, flags);
@@ -2416,31 +2206,12 @@
}
spin_unlock_irqrestore(ap->lock, flags);
- /* spurious? */
- if (!(ap->pflags & ATA_PFLAG_SUSPENDED))
- goto done;
+ WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
if (ap->ops->port_resume)
rc = ap->ops->port_resume(ap);
- /* give devices time to request EH */
- timeout = jiffies + HZ; /* 1s max */
- while (1) {
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- struct ata_device *dev = &ap->device[i];
- unsigned int action = ata_eh_dev_action(dev);
-
- if ((dev->flags & ATA_DFLAG_SUSPENDED) &&
- !(action & ATA_EH_RESUME))
- break;
- }
-
- if (i == ATA_MAX_DEVICES || time_after(jiffies, timeout))
- break;
- msleep(10);
- }
-
- done:
+ /* report result */
spin_lock_irqsave(ap->lock, flags);
ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED);
if (ap->pm_result) {