Input: ads7846 - add support for the ads7843 touchscreen
The ads7843 support has now become almost trivial since the last
rework.
Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 0a26e06..2f5fc80 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -39,7 +39,8 @@
/*
* This code has been heavily tested on a Nokia 770, and lightly
* tested on other ads7846 devices (OSK/Mistral, Lubbock).
- * Support for ads7843 and ads7845 has only been stubbed in.
+ * Support for ads7843 tested on Atmel at91sam926x-EK.
+ * Support for ads7845 has only been stubbed in.
*
* IRQ handling needs a workaround because of a shortcoming in handling
* edge triggered IRQs on some platforms like the OMAP1/2. These
@@ -246,18 +247,16 @@
/* REVISIT: take a few more samples, and compare ... */
- /* maybe off internal vREF */
- if (use_internal) {
- req->ref_off = REF_OFF;
- req->xfer[4].tx_buf = &req->ref_off;
- req->xfer[4].len = 1;
- spi_message_add_tail(&req->xfer[4], &req->msg);
+ /* converter in low power mode & enable PENIRQ */
+ req->ref_off = PWRDOWN;
+ req->xfer[4].tx_buf = &req->ref_off;
+ req->xfer[4].len = 1;
+ spi_message_add_tail(&req->xfer[4], &req->msg);
- req->xfer[5].rx_buf = &req->scratch;
- req->xfer[5].len = 2;
- CS_CHANGE(req->xfer[5]);
- spi_message_add_tail(&req->xfer[5], &req->msg);
- }
+ req->xfer[5].rx_buf = &req->scratch;
+ req->xfer[5].len = 2;
+ CS_CHANGE(req->xfer[5]);
+ spi_message_add_tail(&req->xfer[5], &req->msg);
ts->irq_disabled = 1;
disable_irq(spi->irq);
@@ -536,6 +535,9 @@
} else
Rt = 0;
+ if (ts->model == 7843)
+ Rt = ts->pressure_max / 2;
+
/* Sample found inconsistent by debouncing or pressure is beyond
* the maximum. Don't report it to user space, repeat at least
* once more the measurement