| /* |
| * Copyright 2008-2009 Analog Devices Inc. |
| * |
| * Licensed under the ADI BSD license or the GPL-2 (or later) |
| */ |
| |
| #ifndef _DEF_BF514_H |
| #define _DEF_BF514_H |
| |
| /* Include all Core registers and bit definitions */ |
| #include <asm/def_LPBlackfin.h> |
| |
| /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */ |
| |
| /* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */ |
| #include "defBF51x_base.h" |
| |
| /* The following are the #defines needed by ADSP-BF514 that are not in the common header */ |
| |
| /* SDH Registers */ |
| |
| #define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */ |
| #define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */ |
| #define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */ |
| #define SDH_COMMAND 0xFFC0390C /* SDH Command */ |
| #define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */ |
| #define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */ |
| #define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */ |
| #define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */ |
| #define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */ |
| #define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */ |
| #define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */ |
| #define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */ |
| #define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */ |
| #define SDH_STATUS 0xFFC03934 /* SDH Status */ |
| #define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */ |
| #define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */ |
| #define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */ |
| #define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */ |
| #define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */ |
| #define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */ |
| #define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */ |
| #define SDH_CFG 0xFFC039C8 /* SDH Configuration */ |
| #define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */ |
| #define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */ |
| #define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */ |
| #define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */ |
| #define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */ |
| #define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */ |
| #define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */ |
| #define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */ |
| #define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */ |
| |
| /* Removable Storage Interface Registers */ |
| |
| #define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */ |
| #define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */ |
| #define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */ |
| #define RSI_COMMAND 0xFFC0380C /* RSI Command Register */ |
| #define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */ |
| #define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */ |
| #define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */ |
| #define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */ |
| #define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */ |
| #define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */ |
| #define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */ |
| #define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */ |
| #define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */ |
| #define RSI_STATUS 0xFFC03834 /* RSI Status Register */ |
| #define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */ |
| #define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */ |
| #define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */ |
| #define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */ |
| #define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */ |
| #define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */ |
| #define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */ |
| #define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */ |
| #define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */ |
| #define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */ |
| #define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */ |
| #define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */ |
| #define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */ |
| #define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */ |
| #define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */ |
| #define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */ |
| #define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */ |
| #define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */ |
| |
| /* ********************************************************** */ |
| /* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ |
| /* and MULTI BIT READ MACROS */ |
| /* ********************************************************** */ |
| |
| /* Bit masks for SDH_COMMAND */ |
| |
| #define CMD_IDX 0x3f /* Command Index */ |
| #define CMD_RSP 0x40 /* Response */ |
| #define CMD_L_RSP 0x80 /* Long Response */ |
| #define CMD_INT_E 0x100 /* Command Interrupt */ |
| #define CMD_PEND_E 0x200 /* Command Pending */ |
| #define CMD_E 0x400 /* Command Enable */ |
| |
| /* Bit masks for SDH_PWR_CTL */ |
| |
| #define PWR_ON 0x3 /* Power On */ |
| #if 0 |
| #define TBD 0x3c /* TBD */ |
| #endif |
| #define SD_CMD_OD 0x40 /* Open Drain Output */ |
| #define ROD_CTL 0x80 /* Rod Control */ |
| |
| /* Bit masks for SDH_CLK_CTL */ |
| |
| #define CLKDIV 0xff /* MC_CLK Divisor */ |
| #define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ |
| #define PWR_SV_E 0x200 /* Power Save Enable */ |
| #define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ |
| #define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ |
| |
| /* Bit masks for SDH_RESP_CMD */ |
| |
| #define RESP_CMD 0x3f /* Response Command */ |
| |
| /* Bit masks for SDH_DATA_CTL */ |
| |
| #define DTX_E 0x1 /* Data Transfer Enable */ |
| #define DTX_DIR 0x2 /* Data Transfer Direction */ |
| #define DTX_MODE 0x4 /* Data Transfer Mode */ |
| #define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ |
| #define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ |
| |
| /* Bit masks for SDH_STATUS */ |
| |
| #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ |
| #define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ |
| #define CMD_TIME_OUT 0x4 /* CMD Time Out */ |
| #define DAT_TIME_OUT 0x8 /* Data Time Out */ |
| #define TX_UNDERRUN 0x10 /* Transmit Underrun */ |
| #define RX_OVERRUN 0x20 /* Receive Overrun */ |
| #define CMD_RESP_END 0x40 /* CMD Response End */ |
| #define CMD_SENT 0x80 /* CMD Sent */ |
| #define DAT_END 0x100 /* Data End */ |
| #define START_BIT_ERR 0x200 /* Start Bit Error */ |
| #define DAT_BLK_END 0x400 /* Data Block End */ |
| #define CMD_ACT 0x800 /* CMD Active */ |
| #define TX_ACT 0x1000 /* Transmit Active */ |
| #define RX_ACT 0x2000 /* Receive Active */ |
| #define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ |
| #define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ |
| #define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ |
| #define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ |
| #define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ |
| #define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ |
| #define TX_DAT_RDY 0x100000 /* Transmit Data Available */ |
| #define RX_FIFO_RDY 0x200000 /* Receive Data Available */ |
| |
| /* Bit masks for SDH_STATUS_CLR */ |
| |
| #define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ |
| #define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ |
| #define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ |
| #define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ |
| #define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ |
| #define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ |
| #define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ |
| #define CMD_SENT_STAT 0x80 /* CMD Sent Status */ |
| #define DAT_END_STAT 0x100 /* Data End Status */ |
| #define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ |
| #define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ |
| |
| /* Bit masks for SDH_MASK0 */ |
| |
| #define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ |
| #define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ |
| #define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ |
| #define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ |
| #define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ |
| #define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ |
| #define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ |
| #define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ |
| #define DAT_END_MASK 0x100 /* Data End Mask */ |
| #define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ |
| #define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ |
| #define CMD_ACT_MASK 0x800 /* CMD Active Mask */ |
| #define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ |
| #define RX_ACT_MASK 0x2000 /* Receive Active Mask */ |
| #define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ |
| #define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ |
| #define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ |
| #define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ |
| #define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ |
| #define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ |
| #define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ |
| #define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ |
| |
| /* Bit masks for SDH_FIFO_CNT */ |
| |
| #define FIFO_COUNT 0x7fff /* FIFO Count */ |
| |
| /* Bit masks for SDH_E_STATUS */ |
| |
| #define SDIO_INT_DET 0x2 /* SDIO Int Detected */ |
| #define SD_CARD_DET 0x10 /* SD Card Detect */ |
| |
| /* Bit masks for SDH_E_MASK */ |
| |
| #define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ |
| #define SCD_MSK 0x40 /* Mask Card Detect */ |
| |
| /* Bit masks for SDH_CFG */ |
| |
| #define CLKS_EN 0x1 /* Clocks Enable */ |
| #define SD4E 0x4 /* SDIO 4-Bit Enable */ |
| #define MWE 0x8 /* Moving Window Enable */ |
| #define SD_RST 0x10 /* SDMMC Reset */ |
| #define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ |
| #define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ |
| #define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ |
| |
| /* Bit masks for SDH_RD_WAIT_EN */ |
| |
| #define RWR 0x1 /* Read Wait Request */ |
| |
| #endif /* _DEF_BF514_H */ |