| /*************************************************************************** |
| * |
| * Copyright (C) 2004-2008 SMSC |
| * Copyright (C) 2005-2008 ARM |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| ***************************************************************************/ |
| #ifndef __SMSC911X_H__ |
| #define __SMSC911X_H__ |
| |
| #define TX_FIFO_LOW_THRESHOLD ((u32)1600) |
| #define SMSC911X_EEPROM_SIZE ((u32)7) |
| #define USE_DEBUG 0 |
| |
| /* This is the maximum number of packets to be received every |
| * NAPI poll */ |
| #define SMSC_NAPI_WEIGHT 16 |
| |
| /* implements a PHY loopback test at initialisation time, to ensure a packet |
| * can be successfully looped back */ |
| #define USE_PHY_WORK_AROUND |
| |
| #define DPRINTK(nlevel, klevel, fmt, args...) \ |
| ((void)((NETIF_MSG_##nlevel & pdata->msg_enable) && \ |
| printk(KERN_##klevel "%s: %s: " fmt "\n", \ |
| pdata->dev->name, __func__, ## args))) |
| |
| #if USE_DEBUG >= 1 |
| #define SMSC_WARNING(nlevel, fmt, args...) \ |
| DPRINTK(nlevel, WARNING, fmt, ## args) |
| #else |
| #define SMSC_WARNING(nlevel, fmt, args...) \ |
| ({ do {} while (0); 0; }) |
| #endif |
| |
| #if USE_DEBUG >= 2 |
| #define SMSC_TRACE(nlevel, fmt, args...) \ |
| DPRINTK(nlevel, INFO, fmt, ## args) |
| #else |
| #define SMSC_TRACE(nlevel, fmt, args...) \ |
| ({ do {} while (0); 0; }) |
| #endif |
| |
| #ifdef CONFIG_DEBUG_SPINLOCK |
| #define SMSC_ASSERT_MAC_LOCK(pdata) \ |
| WARN_ON(!spin_is_locked(&pdata->mac_lock)) |
| #else |
| #define SMSC_ASSERT_MAC_LOCK(pdata) do {} while (0) |
| #endif /* CONFIG_DEBUG_SPINLOCK */ |
| |
| /* SMSC911x registers and bitfields */ |
| #define RX_DATA_FIFO 0x00 |
| |
| #define TX_DATA_FIFO 0x20 |
| #define TX_CMD_A_ON_COMP_ 0x80000000 |
| #define TX_CMD_A_BUF_END_ALGN_ 0x03000000 |
| #define TX_CMD_A_4_BYTE_ALGN_ 0x00000000 |
| #define TX_CMD_A_16_BYTE_ALGN_ 0x01000000 |
| #define TX_CMD_A_32_BYTE_ALGN_ 0x02000000 |
| #define TX_CMD_A_DATA_OFFSET_ 0x001F0000 |
| #define TX_CMD_A_FIRST_SEG_ 0x00002000 |
| #define TX_CMD_A_LAST_SEG_ 0x00001000 |
| #define TX_CMD_A_BUF_SIZE_ 0x000007FF |
| #define TX_CMD_B_PKT_TAG_ 0xFFFF0000 |
| #define TX_CMD_B_ADD_CRC_DISABLE_ 0x00002000 |
| #define TX_CMD_B_DISABLE_PADDING_ 0x00001000 |
| #define TX_CMD_B_PKT_BYTE_LENGTH_ 0x000007FF |
| |
| #define RX_STATUS_FIFO 0x40 |
| #define RX_STS_ES_ 0x00008000 |
| #define RX_STS_LENGTH_ERR_ 0x00001000 |
| #define RX_STS_MCAST_ 0x00000400 |
| #define RX_STS_FRAME_TYPE_ 0x00000020 |
| #define RX_STS_CRC_ERR_ 0x00000002 |
| |
| #define RX_STATUS_FIFO_PEEK 0x44 |
| |
| #define TX_STATUS_FIFO 0x48 |
| #define TX_STS_ES_ 0x00008000 |
| #define TX_STS_LOST_CARRIER_ 0x00000800 |
| #define TX_STS_NO_CARRIER_ 0x00000400 |
| #define TX_STS_LATE_COL_ 0x00000200 |
| #define TX_STS_EXCESS_COL_ 0x00000100 |
| |
| #define TX_STATUS_FIFO_PEEK 0x4C |
| |
| #define ID_REV 0x50 |
| #define ID_REV_CHIP_ID_ 0xFFFF0000 |
| #define ID_REV_REV_ID_ 0x0000FFFF |
| |
| #define INT_CFG 0x54 |
| #define INT_CFG_INT_DEAS_ 0xFF000000 |
| #define INT_CFG_INT_DEAS_CLR_ 0x00004000 |
| #define INT_CFG_INT_DEAS_STS_ 0x00002000 |
| #define INT_CFG_IRQ_INT_ 0x00001000 |
| #define INT_CFG_IRQ_EN_ 0x00000100 |
| #define INT_CFG_IRQ_POL_ 0x00000010 |
| #define INT_CFG_IRQ_TYPE_ 0x00000001 |
| |
| #define INT_STS 0x58 |
| #define INT_STS_SW_INT_ 0x80000000 |
| #define INT_STS_TXSTOP_INT_ 0x02000000 |
| #define INT_STS_RXSTOP_INT_ 0x01000000 |
| #define INT_STS_RXDFH_INT_ 0x00800000 |
| #define INT_STS_RXDF_INT_ 0x00400000 |
| #define INT_STS_TX_IOC_ 0x00200000 |
| #define INT_STS_RXD_INT_ 0x00100000 |
| #define INT_STS_GPT_INT_ 0x00080000 |
| #define INT_STS_PHY_INT_ 0x00040000 |
| #define INT_STS_PME_INT_ 0x00020000 |
| #define INT_STS_TXSO_ 0x00010000 |
| #define INT_STS_RWT_ 0x00008000 |
| #define INT_STS_RXE_ 0x00004000 |
| #define INT_STS_TXE_ 0x00002000 |
| #define INT_STS_TDFU_ 0x00000800 |
| #define INT_STS_TDFO_ 0x00000400 |
| #define INT_STS_TDFA_ 0x00000200 |
| #define INT_STS_TSFF_ 0x00000100 |
| #define INT_STS_TSFL_ 0x00000080 |
| #define INT_STS_RXDF_ 0x00000040 |
| #define INT_STS_RDFL_ 0x00000020 |
| #define INT_STS_RSFF_ 0x00000010 |
| #define INT_STS_RSFL_ 0x00000008 |
| #define INT_STS_GPIO2_INT_ 0x00000004 |
| #define INT_STS_GPIO1_INT_ 0x00000002 |
| #define INT_STS_GPIO0_INT_ 0x00000001 |
| |
| #define INT_EN 0x5C |
| #define INT_EN_SW_INT_EN_ 0x80000000 |
| #define INT_EN_TXSTOP_INT_EN_ 0x02000000 |
| #define INT_EN_RXSTOP_INT_EN_ 0x01000000 |
| #define INT_EN_RXDFH_INT_EN_ 0x00800000 |
| #define INT_EN_TIOC_INT_EN_ 0x00200000 |
| #define INT_EN_RXD_INT_EN_ 0x00100000 |
| #define INT_EN_GPT_INT_EN_ 0x00080000 |
| #define INT_EN_PHY_INT_EN_ 0x00040000 |
| #define INT_EN_PME_INT_EN_ 0x00020000 |
| #define INT_EN_TXSO_EN_ 0x00010000 |
| #define INT_EN_RWT_EN_ 0x00008000 |
| #define INT_EN_RXE_EN_ 0x00004000 |
| #define INT_EN_TXE_EN_ 0x00002000 |
| #define INT_EN_TDFU_EN_ 0x00000800 |
| #define INT_EN_TDFO_EN_ 0x00000400 |
| #define INT_EN_TDFA_EN_ 0x00000200 |
| #define INT_EN_TSFF_EN_ 0x00000100 |
| #define INT_EN_TSFL_EN_ 0x00000080 |
| #define INT_EN_RXDF_EN_ 0x00000040 |
| #define INT_EN_RDFL_EN_ 0x00000020 |
| #define INT_EN_RSFF_EN_ 0x00000010 |
| #define INT_EN_RSFL_EN_ 0x00000008 |
| #define INT_EN_GPIO2_INT_ 0x00000004 |
| #define INT_EN_GPIO1_INT_ 0x00000002 |
| #define INT_EN_GPIO0_INT_ 0x00000001 |
| |
| #define BYTE_TEST 0x64 |
| |
| #define FIFO_INT 0x68 |
| #define FIFO_INT_TX_AVAIL_LEVEL_ 0xFF000000 |
| #define FIFO_INT_TX_STS_LEVEL_ 0x00FF0000 |
| #define FIFO_INT_RX_AVAIL_LEVEL_ 0x0000FF00 |
| #define FIFO_INT_RX_STS_LEVEL_ 0x000000FF |
| |
| #define RX_CFG 0x6C |
| #define RX_CFG_RX_END_ALGN_ 0xC0000000 |
| #define RX_CFG_RX_END_ALGN4_ 0x00000000 |
| #define RX_CFG_RX_END_ALGN16_ 0x40000000 |
| #define RX_CFG_RX_END_ALGN32_ 0x80000000 |
| #define RX_CFG_RX_DMA_CNT_ 0x0FFF0000 |
| #define RX_CFG_RX_DUMP_ 0x00008000 |
| #define RX_CFG_RXDOFF_ 0x00001F00 |
| |
| #define TX_CFG 0x70 |
| #define TX_CFG_TXS_DUMP_ 0x00008000 |
| #define TX_CFG_TXD_DUMP_ 0x00004000 |
| #define TX_CFG_TXSAO_ 0x00000004 |
| #define TX_CFG_TX_ON_ 0x00000002 |
| #define TX_CFG_STOP_TX_ 0x00000001 |
| |
| #define HW_CFG 0x74 |
| #define HW_CFG_TTM_ 0x00200000 |
| #define HW_CFG_SF_ 0x00100000 |
| #define HW_CFG_TX_FIF_SZ_ 0x000F0000 |
| #define HW_CFG_TR_ 0x00003000 |
| #define HW_CFG_SRST_ 0x00000001 |
| |
| /* only available on 115/117 */ |
| #define HW_CFG_PHY_CLK_SEL_ 0x00000060 |
| #define HW_CFG_PHY_CLK_SEL_INT_PHY_ 0x00000000 |
| #define HW_CFG_PHY_CLK_SEL_EXT_PHY_ 0x00000020 |
| #define HW_CFG_PHY_CLK_SEL_CLK_DIS_ 0x00000040 |
| #define HW_CFG_SMI_SEL_ 0x00000010 |
| #define HW_CFG_EXT_PHY_DET_ 0x00000008 |
| #define HW_CFG_EXT_PHY_EN_ 0x00000004 |
| #define HW_CFG_SRST_TO_ 0x00000002 |
| |
| /* only available on 116/118 */ |
| #define HW_CFG_32_16_BIT_MODE_ 0x00000004 |
| |
| #define RX_DP_CTRL 0x78 |
| #define RX_DP_CTRL_RX_FFWD_ 0x80000000 |
| |
| #define RX_FIFO_INF 0x7C |
| #define RX_FIFO_INF_RXSUSED_ 0x00FF0000 |
| #define RX_FIFO_INF_RXDUSED_ 0x0000FFFF |
| |
| #define TX_FIFO_INF 0x80 |
| #define TX_FIFO_INF_TSUSED_ 0x00FF0000 |
| #define TX_FIFO_INF_TDFREE_ 0x0000FFFF |
| |
| #define PMT_CTRL 0x84 |
| #define PMT_CTRL_PM_MODE_ 0x00003000 |
| #define PMT_CTRL_PM_MODE_D0_ 0x00000000 |
| #define PMT_CTRL_PM_MODE_D1_ 0x00001000 |
| #define PMT_CTRL_PM_MODE_D2_ 0x00002000 |
| #define PMT_CTRL_PM_MODE_D3_ 0x00003000 |
| #define PMT_CTRL_PHY_RST_ 0x00000400 |
| #define PMT_CTRL_WOL_EN_ 0x00000200 |
| #define PMT_CTRL_ED_EN_ 0x00000100 |
| #define PMT_CTRL_PME_TYPE_ 0x00000040 |
| #define PMT_CTRL_WUPS_ 0x00000030 |
| #define PMT_CTRL_WUPS_NOWAKE_ 0x00000000 |
| #define PMT_CTRL_WUPS_ED_ 0x00000010 |
| #define PMT_CTRL_WUPS_WOL_ 0x00000020 |
| #define PMT_CTRL_WUPS_MULTI_ 0x00000030 |
| #define PMT_CTRL_PME_IND_ 0x00000008 |
| #define PMT_CTRL_PME_POL_ 0x00000004 |
| #define PMT_CTRL_PME_EN_ 0x00000002 |
| #define PMT_CTRL_READY_ 0x00000001 |
| |
| #define GPIO_CFG 0x88 |
| #define GPIO_CFG_LED3_EN_ 0x40000000 |
| #define GPIO_CFG_LED2_EN_ 0x20000000 |
| #define GPIO_CFG_LED1_EN_ 0x10000000 |
| #define GPIO_CFG_GPIO2_INT_POL_ 0x04000000 |
| #define GPIO_CFG_GPIO1_INT_POL_ 0x02000000 |
| #define GPIO_CFG_GPIO0_INT_POL_ 0x01000000 |
| #define GPIO_CFG_EEPR_EN_ 0x00700000 |
| #define GPIO_CFG_GPIOBUF2_ 0x00040000 |
| #define GPIO_CFG_GPIOBUF1_ 0x00020000 |
| #define GPIO_CFG_GPIOBUF0_ 0x00010000 |
| #define GPIO_CFG_GPIODIR2_ 0x00000400 |
| #define GPIO_CFG_GPIODIR1_ 0x00000200 |
| #define GPIO_CFG_GPIODIR0_ 0x00000100 |
| #define GPIO_CFG_GPIOD4_ 0x00000020 |
| #define GPIO_CFG_GPIOD3_ 0x00000010 |
| #define GPIO_CFG_GPIOD2_ 0x00000004 |
| #define GPIO_CFG_GPIOD1_ 0x00000002 |
| #define GPIO_CFG_GPIOD0_ 0x00000001 |
| |
| #define GPT_CFG 0x8C |
| #define GPT_CFG_TIMER_EN_ 0x20000000 |
| #define GPT_CFG_GPT_LOAD_ 0x0000FFFF |
| |
| #define GPT_CNT 0x90 |
| #define GPT_CNT_GPT_CNT_ 0x0000FFFF |
| |
| #define WORD_SWAP 0x98 |
| |
| #define FREE_RUN 0x9C |
| |
| #define RX_DROP 0xA0 |
| |
| #define MAC_CSR_CMD 0xA4 |
| #define MAC_CSR_CMD_CSR_BUSY_ 0x80000000 |
| #define MAC_CSR_CMD_R_NOT_W_ 0x40000000 |
| #define MAC_CSR_CMD_CSR_ADDR_ 0x000000FF |
| |
| #define MAC_CSR_DATA 0xA8 |
| |
| #define AFC_CFG 0xAC |
| #define AFC_CFG_AFC_HI_ 0x00FF0000 |
| #define AFC_CFG_AFC_LO_ 0x0000FF00 |
| #define AFC_CFG_BACK_DUR_ 0x000000F0 |
| #define AFC_CFG_FCMULT_ 0x00000008 |
| #define AFC_CFG_FCBRD_ 0x00000004 |
| #define AFC_CFG_FCADD_ 0x00000002 |
| #define AFC_CFG_FCANY_ 0x00000001 |
| |
| #define E2P_CMD 0xB0 |
| #define E2P_CMD_EPC_BUSY_ 0x80000000 |
| #define E2P_CMD_EPC_CMD_ 0x70000000 |
| #define E2P_CMD_EPC_CMD_READ_ 0x00000000 |
| #define E2P_CMD_EPC_CMD_EWDS_ 0x10000000 |
| #define E2P_CMD_EPC_CMD_EWEN_ 0x20000000 |
| #define E2P_CMD_EPC_CMD_WRITE_ 0x30000000 |
| #define E2P_CMD_EPC_CMD_WRAL_ 0x40000000 |
| #define E2P_CMD_EPC_CMD_ERASE_ 0x50000000 |
| #define E2P_CMD_EPC_CMD_ERAL_ 0x60000000 |
| #define E2P_CMD_EPC_CMD_RELOAD_ 0x70000000 |
| #define E2P_CMD_EPC_TIMEOUT_ 0x00000200 |
| #define E2P_CMD_MAC_ADDR_LOADED_ 0x00000100 |
| #define E2P_CMD_EPC_ADDR_ 0x000000FF |
| |
| #define E2P_DATA 0xB4 |
| #define E2P_DATA_EEPROM_DATA_ 0x000000FF |
| #define LAN_REGISTER_EXTENT 0x00000100 |
| |
| /* |
| * MAC Control and Status Register (Indirect Address) |
| * Offset (through the MAC_CSR CMD and DATA port) |
| */ |
| #define MAC_CR 0x01 |
| #define MAC_CR_RXALL_ 0x80000000 |
| #define MAC_CR_HBDIS_ 0x10000000 |
| #define MAC_CR_RCVOWN_ 0x00800000 |
| #define MAC_CR_LOOPBK_ 0x00200000 |
| #define MAC_CR_FDPX_ 0x00100000 |
| #define MAC_CR_MCPAS_ 0x00080000 |
| #define MAC_CR_PRMS_ 0x00040000 |
| #define MAC_CR_INVFILT_ 0x00020000 |
| #define MAC_CR_PASSBAD_ 0x00010000 |
| #define MAC_CR_HFILT_ 0x00008000 |
| #define MAC_CR_HPFILT_ 0x00002000 |
| #define MAC_CR_LCOLL_ 0x00001000 |
| #define MAC_CR_BCAST_ 0x00000800 |
| #define MAC_CR_DISRTY_ 0x00000400 |
| #define MAC_CR_PADSTR_ 0x00000100 |
| #define MAC_CR_BOLMT_MASK_ 0x000000C0 |
| #define MAC_CR_DFCHK_ 0x00000020 |
| #define MAC_CR_TXEN_ 0x00000008 |
| #define MAC_CR_RXEN_ 0x00000004 |
| |
| #define ADDRH 0x02 |
| |
| #define ADDRL 0x03 |
| |
| #define HASHH 0x04 |
| |
| #define HASHL 0x05 |
| |
| #define MII_ACC 0x06 |
| #define MII_ACC_PHY_ADDR_ 0x0000F800 |
| #define MII_ACC_MIIRINDA_ 0x000007C0 |
| #define MII_ACC_MII_WRITE_ 0x00000002 |
| #define MII_ACC_MII_BUSY_ 0x00000001 |
| |
| #define MII_DATA 0x07 |
| |
| #define FLOW 0x08 |
| #define FLOW_FCPT_ 0xFFFF0000 |
| #define FLOW_FCPASS_ 0x00000004 |
| #define FLOW_FCEN_ 0x00000002 |
| #define FLOW_FCBSY_ 0x00000001 |
| |
| #define VLAN1 0x09 |
| |
| #define VLAN2 0x0A |
| |
| #define WUFF 0x0B |
| |
| #define WUCSR 0x0C |
| #define WUCSR_GUE_ 0x00000200 |
| #define WUCSR_WUFR_ 0x00000040 |
| #define WUCSR_MPR_ 0x00000020 |
| #define WUCSR_WAKE_EN_ 0x00000004 |
| #define WUCSR_MPEN_ 0x00000002 |
| |
| /* |
| * Phy definitions (vendor-specific) |
| */ |
| #define LAN9118_PHY_ID 0x00C0001C |
| |
| #define MII_INTSTS 0x1D |
| |
| #define MII_INTMSK 0x1E |
| #define PHY_INTMSK_AN_RCV_ (1 << 1) |
| #define PHY_INTMSK_PDFAULT_ (1 << 2) |
| #define PHY_INTMSK_AN_ACK_ (1 << 3) |
| #define PHY_INTMSK_LNKDOWN_ (1 << 4) |
| #define PHY_INTMSK_RFAULT_ (1 << 5) |
| #define PHY_INTMSK_AN_COMP_ (1 << 6) |
| #define PHY_INTMSK_ENERGYON_ (1 << 7) |
| #define PHY_INTMSK_DEFAULT_ (PHY_INTMSK_ENERGYON_ | \ |
| PHY_INTMSK_AN_COMP_ | \ |
| PHY_INTMSK_RFAULT_ | \ |
| PHY_INTMSK_LNKDOWN_) |
| |
| #define ADVERTISE_PAUSE_ALL (ADVERTISE_PAUSE_CAP | \ |
| ADVERTISE_PAUSE_ASYM) |
| |
| #define LPA_PAUSE_ALL (LPA_PAUSE_CAP | \ |
| LPA_PAUSE_ASYM) |
| |
| /* |
| * Provide hooks to let the arch add to the initialisation procedure |
| * and to override the source of the MAC address. |
| */ |
| #define SMSC_INITIALIZE() do {} while (0) |
| #define smsc_get_mac(dev) smsc911x_read_mac_address((dev)) |
| |
| #ifdef CONFIG_SMSC911X_ARCH_HOOKS |
| #include <asm/smsc911x.h> |
| #endif |
| |
| #endif /* __SMSC911X_H__ */ |