| /* |
| * PowerPC version |
| * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) |
| * |
| * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) |
| * and Cort Dougan (PReP) (cort@cs.nmt.edu) |
| * Copyright (C) 1996 Paul Mackerras |
| * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). |
| * PPC44x/36-bit changes by Matt Porter (mporter@mvista.com) |
| * |
| * Derived from "arch/i386/mm/init.c" |
| * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/stddef.h> |
| #include <linux/init.h> |
| #include <linux/bootmem.h> |
| #include <linux/highmem.h> |
| #include <linux/initrd.h> |
| #include <linux/pagemap.h> |
| |
| #include <asm/pgalloc.h> |
| #include <asm/prom.h> |
| #include <asm/io.h> |
| #include <asm/mmu_context.h> |
| #include <asm/pgtable.h> |
| #include <asm/mmu.h> |
| #include <asm/smp.h> |
| #include <asm/machdep.h> |
| #include <asm/btext.h> |
| #include <asm/tlb.h> |
| #include <asm/bootinfo.h> |
| |
| #include "mem_pieces.h" |
| #include "mmu_decl.h" |
| |
| #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL) |
| /* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */ |
| #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - KERNELBASE)) |
| #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL" |
| #endif |
| #endif |
| #define MAX_LOW_MEM CONFIG_LOWMEM_SIZE |
| |
| DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); |
| |
| unsigned long total_memory; |
| unsigned long total_lowmem; |
| |
| unsigned long ppc_memstart; |
| unsigned long ppc_memoffset = PAGE_OFFSET; |
| |
| int mem_init_done; |
| int init_bootmem_done; |
| int boot_mapsize; |
| #ifdef CONFIG_PPC_PMAC |
| unsigned long agp_special_page; |
| #endif |
| |
| extern char _end[]; |
| extern char etext[], _stext[]; |
| extern char __init_begin, __init_end; |
| extern char __prep_begin, __prep_end; |
| extern char __chrp_begin, __chrp_end; |
| extern char __pmac_begin, __pmac_end; |
| extern char __openfirmware_begin, __openfirmware_end; |
| |
| #ifdef CONFIG_HIGHMEM |
| pte_t *kmap_pte; |
| pgprot_t kmap_prot; |
| |
| EXPORT_SYMBOL(kmap_prot); |
| EXPORT_SYMBOL(kmap_pte); |
| #endif |
| |
| void MMU_init(void); |
| void set_phys_avail(unsigned long total_ram); |
| |
| /* XXX should be in current.h -- paulus */ |
| extern struct task_struct *current_set[NR_CPUS]; |
| |
| char *klimit = _end; |
| struct mem_pieces phys_avail; |
| |
| /* |
| * this tells the system to map all of ram with the segregs |
| * (i.e. page tables) instead of the bats. |
| * -- Cort |
| */ |
| int __map_without_bats; |
| int __map_without_ltlbs; |
| |
| /* max amount of RAM to use */ |
| unsigned long __max_memory; |
| /* max amount of low RAM to map in */ |
| unsigned long __max_low_memory = MAX_LOW_MEM; |
| |
| void show_mem(void) |
| { |
| int i,free = 0,total = 0,reserved = 0; |
| int shared = 0, cached = 0; |
| int highmem = 0; |
| |
| printk("Mem-info:\n"); |
| show_free_areas(); |
| printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); |
| i = max_mapnr; |
| while (i-- > 0) { |
| total++; |
| if (PageHighMem(mem_map+i)) |
| highmem++; |
| if (PageReserved(mem_map+i)) |
| reserved++; |
| else if (PageSwapCache(mem_map+i)) |
| cached++; |
| else if (!page_count(mem_map+i)) |
| free++; |
| else |
| shared += page_count(mem_map+i) - 1; |
| } |
| printk("%d pages of RAM\n",total); |
| printk("%d pages of HIGHMEM\n", highmem); |
| printk("%d free pages\n",free); |
| printk("%d reserved pages\n",reserved); |
| printk("%d pages shared\n",shared); |
| printk("%d pages swap cached\n",cached); |
| } |
| |
| /* Free up now-unused memory */ |
| static void free_sec(unsigned long start, unsigned long end, const char *name) |
| { |
| unsigned long cnt = 0; |
| |
| while (start < end) { |
| ClearPageReserved(virt_to_page(start)); |
| set_page_count(virt_to_page(start), 1); |
| free_page(start); |
| cnt++; |
| start += PAGE_SIZE; |
| } |
| if (cnt) { |
| printk(" %ldk %s", cnt << (PAGE_SHIFT - 10), name); |
| totalram_pages += cnt; |
| } |
| } |
| |
| void free_initmem(void) |
| { |
| #define FREESEC(TYPE) \ |
| free_sec((unsigned long)(&__ ## TYPE ## _begin), \ |
| (unsigned long)(&__ ## TYPE ## _end), \ |
| #TYPE); |
| |
| printk ("Freeing unused kernel memory:"); |
| FREESEC(init); |
| if (_machine != _MACH_Pmac) |
| FREESEC(pmac); |
| if (_machine != _MACH_chrp) |
| FREESEC(chrp); |
| if (_machine != _MACH_prep) |
| FREESEC(prep); |
| if (!have_of) |
| FREESEC(openfirmware); |
| printk("\n"); |
| ppc_md.progress = NULL; |
| #undef FREESEC |
| } |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| void free_initrd_mem(unsigned long start, unsigned long end) |
| { |
| printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); |
| |
| for (; start < end; start += PAGE_SIZE) { |
| ClearPageReserved(virt_to_page(start)); |
| set_page_count(virt_to_page(start), 1); |
| free_page(start); |
| totalram_pages++; |
| } |
| } |
| #endif |
| |
| /* |
| * Check for command-line options that affect what MMU_init will do. |
| */ |
| void MMU_setup(void) |
| { |
| /* Check for nobats option (used in mapin_ram). */ |
| if (strstr(cmd_line, "nobats")) { |
| __map_without_bats = 1; |
| } |
| |
| if (strstr(cmd_line, "noltlbs")) { |
| __map_without_ltlbs = 1; |
| } |
| |
| /* Look for mem= option on command line */ |
| if (strstr(cmd_line, "mem=")) { |
| char *p, *q; |
| unsigned long maxmem = 0; |
| |
| for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) { |
| q = p + 4; |
| if (p > cmd_line && p[-1] != ' ') |
| continue; |
| maxmem = simple_strtoul(q, &q, 0); |
| if (*q == 'k' || *q == 'K') { |
| maxmem <<= 10; |
| ++q; |
| } else if (*q == 'm' || *q == 'M') { |
| maxmem <<= 20; |
| ++q; |
| } |
| } |
| __max_memory = maxmem; |
| } |
| } |
| |
| /* |
| * MMU_init sets up the basic memory mappings for the kernel, |
| * including both RAM and possibly some I/O regions, |
| * and sets up the page tables and the MMU hardware ready to go. |
| */ |
| void __init MMU_init(void) |
| { |
| if (ppc_md.progress) |
| ppc_md.progress("MMU:enter", 0x111); |
| |
| /* parse args from command line */ |
| MMU_setup(); |
| |
| /* |
| * Figure out how much memory we have, how much |
| * is lowmem, and how much is highmem. If we were |
| * passed the total memory size from the bootloader, |
| * just use it. |
| */ |
| if (boot_mem_size) |
| total_memory = boot_mem_size; |
| else |
| total_memory = ppc_md.find_end_of_memory(); |
| |
| if (__max_memory && total_memory > __max_memory) |
| total_memory = __max_memory; |
| total_lowmem = total_memory; |
| #ifdef CONFIG_FSL_BOOKE |
| /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB |
| * entries, so we need to adjust lowmem to match the amount we can map |
| * in the fixed entries */ |
| adjust_total_lowmem(); |
| #endif /* CONFIG_FSL_BOOKE */ |
| if (total_lowmem > __max_low_memory) { |
| total_lowmem = __max_low_memory; |
| #ifndef CONFIG_HIGHMEM |
| total_memory = total_lowmem; |
| #endif /* CONFIG_HIGHMEM */ |
| } |
| set_phys_avail(total_lowmem); |
| |
| /* Initialize the MMU hardware */ |
| if (ppc_md.progress) |
| ppc_md.progress("MMU:hw init", 0x300); |
| MMU_init_hw(); |
| |
| /* Map in all of RAM starting at KERNELBASE */ |
| if (ppc_md.progress) |
| ppc_md.progress("MMU:mapin", 0x301); |
| mapin_ram(); |
| |
| #ifdef CONFIG_HIGHMEM |
| ioremap_base = PKMAP_BASE; |
| #else |
| ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */ |
| #endif /* CONFIG_HIGHMEM */ |
| ioremap_bot = ioremap_base; |
| |
| /* Map in I/O resources */ |
| if (ppc_md.progress) |
| ppc_md.progress("MMU:setio", 0x302); |
| if (ppc_md.setup_io_mappings) |
| ppc_md.setup_io_mappings(); |
| |
| /* Initialize the context management stuff */ |
| mmu_context_init(); |
| |
| if (ppc_md.progress) |
| ppc_md.progress("MMU:exit", 0x211); |
| |
| #ifdef CONFIG_BOOTX_TEXT |
| /* By default, we are no longer mapped */ |
| boot_text_mapped = 0; |
| /* Must be done last, or ppc_md.progress will die. */ |
| map_boot_text(); |
| #endif |
| } |
| |
| /* This is only called until mem_init is done. */ |
| void __init *early_get_page(void) |
| { |
| void *p; |
| |
| if (init_bootmem_done) { |
| p = alloc_bootmem_pages(PAGE_SIZE); |
| } else { |
| p = mem_pieces_find(PAGE_SIZE, PAGE_SIZE); |
| } |
| return p; |
| } |
| |
| /* |
| * Initialize the bootmem system and give it all the memory we |
| * have available. |
| */ |
| void __init do_init_bootmem(void) |
| { |
| unsigned long start, size; |
| int i; |
| |
| /* |
| * Find an area to use for the bootmem bitmap. |
| * We look for the first area which is at least |
| * 128kB in length (128kB is enough for a bitmap |
| * for 4GB of memory, using 4kB pages), plus 1 page |
| * (in case the address isn't page-aligned). |
| */ |
| start = 0; |
| size = 0; |
| for (i = 0; i < phys_avail.n_regions; ++i) { |
| unsigned long a = phys_avail.regions[i].address; |
| unsigned long s = phys_avail.regions[i].size; |
| if (s <= size) |
| continue; |
| start = a; |
| size = s; |
| if (s >= 33 * PAGE_SIZE) |
| break; |
| } |
| start = PAGE_ALIGN(start); |
| |
| min_low_pfn = start >> PAGE_SHIFT; |
| max_low_pfn = (PPC_MEMSTART + total_lowmem) >> PAGE_SHIFT; |
| max_pfn = (PPC_MEMSTART + total_memory) >> PAGE_SHIFT; |
| boot_mapsize = init_bootmem_node(&contig_page_data, min_low_pfn, |
| PPC_MEMSTART >> PAGE_SHIFT, |
| max_low_pfn); |
| |
| /* remove the bootmem bitmap from the available memory */ |
| mem_pieces_remove(&phys_avail, start, boot_mapsize, 1); |
| |
| /* add everything in phys_avail into the bootmem map */ |
| for (i = 0; i < phys_avail.n_regions; ++i) |
| free_bootmem(phys_avail.regions[i].address, |
| phys_avail.regions[i].size); |
| |
| init_bootmem_done = 1; |
| } |
| |
| /* |
| * paging_init() sets up the page tables - in fact we've already done this. |
| */ |
| void __init paging_init(void) |
| { |
| unsigned long zones_size[MAX_NR_ZONES], i; |
| |
| #ifdef CONFIG_HIGHMEM |
| map_page(PKMAP_BASE, 0, 0); /* XXX gross */ |
| pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k |
| (PKMAP_BASE), PKMAP_BASE), PKMAP_BASE); |
| map_page(KMAP_FIX_BEGIN, 0, 0); /* XXX gross */ |
| kmap_pte = pte_offset_kernel(pmd_offset(pgd_offset_k |
| (KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN); |
| kmap_prot = PAGE_KERNEL; |
| #endif /* CONFIG_HIGHMEM */ |
| |
| /* |
| * All pages are DMA-able so we put them all in the DMA zone. |
| */ |
| zones_size[ZONE_DMA] = total_lowmem >> PAGE_SHIFT; |
| for (i = 1; i < MAX_NR_ZONES; i++) |
| zones_size[i] = 0; |
| |
| #ifdef CONFIG_HIGHMEM |
| zones_size[ZONE_HIGHMEM] = (total_memory - total_lowmem) >> PAGE_SHIFT; |
| #endif /* CONFIG_HIGHMEM */ |
| |
| free_area_init(zones_size); |
| } |
| |
| void __init mem_init(void) |
| { |
| unsigned long addr; |
| int codepages = 0; |
| int datapages = 0; |
| int initpages = 0; |
| #ifdef CONFIG_HIGHMEM |
| unsigned long highmem_mapnr; |
| |
| highmem_mapnr = total_lowmem >> PAGE_SHIFT; |
| #endif /* CONFIG_HIGHMEM */ |
| max_mapnr = total_memory >> PAGE_SHIFT; |
| |
| high_memory = (void *) __va(PPC_MEMSTART + total_lowmem); |
| num_physpages = max_mapnr; /* RAM is assumed contiguous */ |
| |
| totalram_pages += free_all_bootmem(); |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| /* if we are booted from BootX with an initial ramdisk, |
| make sure the ramdisk pages aren't reserved. */ |
| if (initrd_start) { |
| for (addr = initrd_start; addr < initrd_end; addr += PAGE_SIZE) |
| ClearPageReserved(virt_to_page(addr)); |
| } |
| #endif /* CONFIG_BLK_DEV_INITRD */ |
| |
| #ifdef CONFIG_PPC_OF |
| /* mark the RTAS pages as reserved */ |
| if ( rtas_data ) |
| for (addr = (ulong)__va(rtas_data); |
| addr < PAGE_ALIGN((ulong)__va(rtas_data)+rtas_size) ; |
| addr += PAGE_SIZE) |
| SetPageReserved(virt_to_page(addr)); |
| #endif |
| #ifdef CONFIG_PPC_PMAC |
| if (agp_special_page) |
| SetPageReserved(virt_to_page(agp_special_page)); |
| #endif |
| for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory; |
| addr += PAGE_SIZE) { |
| if (!PageReserved(virt_to_page(addr))) |
| continue; |
| if (addr < (ulong) etext) |
| codepages++; |
| else if (addr >= (unsigned long)&__init_begin |
| && addr < (unsigned long)&__init_end) |
| initpages++; |
| else if (addr < (ulong) klimit) |
| datapages++; |
| } |
| |
| #ifdef CONFIG_HIGHMEM |
| { |
| unsigned long pfn; |
| |
| for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) { |
| struct page *page = mem_map + pfn; |
| |
| ClearPageReserved(page); |
| set_page_count(page, 1); |
| __free_page(page); |
| totalhigh_pages++; |
| } |
| totalram_pages += totalhigh_pages; |
| } |
| #endif /* CONFIG_HIGHMEM */ |
| |
| printk("Memory: %luk available (%dk kernel code, %dk data, %dk init, %ldk highmem)\n", |
| (unsigned long)nr_free_pages()<< (PAGE_SHIFT-10), |
| codepages<< (PAGE_SHIFT-10), datapages<< (PAGE_SHIFT-10), |
| initpages<< (PAGE_SHIFT-10), |
| (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))); |
| |
| #ifdef CONFIG_PPC_PMAC |
| if (agp_special_page) |
| printk(KERN_INFO "AGP special page: 0x%08lx\n", agp_special_page); |
| #endif |
| |
| mem_init_done = 1; |
| } |
| |
| /* |
| * Set phys_avail to the amount of physical memory, |
| * less the kernel text/data/bss. |
| */ |
| void __init |
| set_phys_avail(unsigned long total_memory) |
| { |
| unsigned long kstart, ksize; |
| |
| /* |
| * Initially, available physical memory is equivalent to all |
| * physical memory. |
| */ |
| |
| phys_avail.regions[0].address = PPC_MEMSTART; |
| phys_avail.regions[0].size = total_memory; |
| phys_avail.n_regions = 1; |
| |
| /* |
| * Map out the kernel text/data/bss from the available physical |
| * memory. |
| */ |
| |
| kstart = __pa(_stext); /* should be 0 */ |
| ksize = PAGE_ALIGN(klimit - _stext); |
| |
| mem_pieces_remove(&phys_avail, kstart, ksize, 0); |
| mem_pieces_remove(&phys_avail, 0, 0x4000, 0); |
| |
| #if defined(CONFIG_BLK_DEV_INITRD) |
| /* Remove the init RAM disk from the available memory. */ |
| if (initrd_start) { |
| mem_pieces_remove(&phys_avail, __pa(initrd_start), |
| initrd_end - initrd_start, 1); |
| } |
| #endif /* CONFIG_BLK_DEV_INITRD */ |
| #ifdef CONFIG_PPC_OF |
| /* remove the RTAS pages from the available memory */ |
| if (rtas_data) |
| mem_pieces_remove(&phys_avail, rtas_data, rtas_size, 1); |
| #endif |
| #ifdef CONFIG_PPC_PMAC |
| /* Because of some uninorth weirdness, we need a page of |
| * memory as high as possible (it must be outside of the |
| * bus address seen as the AGP aperture). It will be used |
| * by the r128 DRM driver |
| * |
| * FIXME: We need to make sure that page doesn't overlap any of the\ |
| * above. This could be done by improving mem_pieces_find to be able |
| * to do a backward search from the end of the list. |
| */ |
| if (_machine == _MACH_Pmac && find_devices("uni-north-agp")) { |
| agp_special_page = (total_memory - PAGE_SIZE); |
| mem_pieces_remove(&phys_avail, agp_special_page, PAGE_SIZE, 0); |
| agp_special_page = (unsigned long)__va(agp_special_page); |
| } |
| #endif /* CONFIG_PPC_PMAC */ |
| } |
| |
| /* Mark some memory as reserved by removing it from phys_avail. */ |
| void __init reserve_phys_mem(unsigned long start, unsigned long size) |
| { |
| mem_pieces_remove(&phys_avail, start, size, 1); |
| } |
| |
| /* |
| * This is called when a page has been modified by the kernel. |
| * It just marks the page as not i-cache clean. We do the i-cache |
| * flush later when the page is given to a user process, if necessary. |
| */ |
| void flush_dcache_page(struct page *page) |
| { |
| clear_bit(PG_arch_1, &page->flags); |
| } |
| |
| void flush_dcache_icache_page(struct page *page) |
| { |
| #ifdef CONFIG_BOOKE |
| __flush_dcache_icache(kmap(page)); |
| kunmap(page); |
| #elif CONFIG_8xx |
| /* On 8xx there is no need to kmap since highmem is not supported */ |
| __flush_dcache_icache(page_address(page)); |
| #else |
| __flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT); |
| #endif |
| |
| } |
| void clear_user_page(void *page, unsigned long vaddr, struct page *pg) |
| { |
| clear_page(page); |
| clear_bit(PG_arch_1, &pg->flags); |
| } |
| |
| void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, |
| struct page *pg) |
| { |
| copy_page(vto, vfrom); |
| clear_bit(PG_arch_1, &pg->flags); |
| } |
| |
| void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, |
| unsigned long addr, int len) |
| { |
| unsigned long maddr; |
| |
| maddr = (unsigned long) kmap(page) + (addr & ~PAGE_MASK); |
| flush_icache_range(maddr, maddr + len); |
| kunmap(page); |
| } |
| |
| /* |
| * This is called at the end of handling a user page fault, when the |
| * fault has been handled by updating a PTE in the linux page tables. |
| * We use it to preload an HPTE into the hash table corresponding to |
| * the updated linux PTE. |
| */ |
| void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, |
| pte_t pte) |
| { |
| /* handle i-cache coherency */ |
| unsigned long pfn = pte_pfn(pte); |
| |
| if (pfn_valid(pfn)) { |
| struct page *page = pfn_to_page(pfn); |
| if (!PageReserved(page) |
| && !test_bit(PG_arch_1, &page->flags)) { |
| if (vma->vm_mm == current->active_mm) { |
| #ifdef CONFIG_8xx |
| /* On 8xx, cache control instructions (particularly |
| * "dcbst" from flush_dcache_icache) fault as write |
| * operation if there is an unpopulated TLB entry |
| * for the address in question. To workaround that, |
| * we invalidate the TLB here, thus avoiding dcbst |
| * misbehaviour. |
| */ |
| _tlbie(address); |
| #endif |
| __flush_dcache_icache((void *) address); |
| } else |
| flush_dcache_icache_page(page); |
| set_bit(PG_arch_1, &page->flags); |
| } |
| } |
| |
| #ifdef CONFIG_PPC_STD_MMU |
| /* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */ |
| if (Hash != 0 && pte_young(pte)) { |
| struct mm_struct *mm; |
| pmd_t *pmd; |
| |
| mm = (address < TASK_SIZE)? vma->vm_mm: &init_mm; |
| pmd = pmd_offset(pgd_offset(mm, address), address); |
| if (!pmd_none(*pmd)) |
| add_hash_page(mm->context, address, pmd_val(*pmd)); |
| } |
| #endif |
| } |
| |
| /* |
| * This is called by /dev/mem to know if a given address has to |
| * be mapped non-cacheable or not |
| */ |
| int page_is_ram(unsigned long pfn) |
| { |
| unsigned long paddr = (pfn << PAGE_SHIFT); |
| |
| return paddr < __pa(high_memory); |
| } |
| |
| pgprot_t phys_mem_access_prot(struct file *file, unsigned long addr, |
| unsigned long size, pgprot_t vma_prot) |
| { |
| if (ppc_md.phys_mem_access_prot) |
| return ppc_md.phys_mem_access_prot(file, addr, size, vma_prot); |
| |
| if (!page_is_ram(addr >> PAGE_SHIFT)) |
| vma_prot = __pgprot(pgprot_val(vma_prot) |
| | _PAGE_GUARDED | _PAGE_NO_CACHE); |
| return vma_prot; |
| } |
| EXPORT_SYMBOL(phys_mem_access_prot); |