ARM: dts: msm: QCS605 overlay camera changes
Add support to probe aux sensor in QCS605 CDP.
CRs-Fixed: 2187330
Change-Id: I9ee55abf2dc5d82d4a1a3f4f199f436bc0e11f74
Signed-off-by: Tanvi Aggarwal <tanvia@codeaurora.org>
diff --git a/arch/arm64/boot/dts/qcom/qcs605-cdp-overlay.dts b/arch/arm64/boot/dts/qcom/qcs605-cdp-overlay.dts
index 01471b6..1429880 100644
--- a/arch/arm64/boot/dts/qcom/qcs605-cdp-overlay.dts
+++ b/arch/arm64/boot/dts/qcom/qcs605-cdp-overlay.dts
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -32,3 +32,47 @@
<0x0001001b 0x0102001a 0x0 0x0>,
<0x0001001b 0x0201011a 0x0 0x0>;
};
+
+&cam_cci {
+ /delete-node/ qcom,cam-sensor@1;
+ qcom,cam-sensor@1 {
+ cell-index = <1>;
+ compatible = "qcom,cam-sensor";
+ reg = <0x1>;
+ csiphy-sd-index = <1>;
+ sensor-position-roll = <90>;
+ sensor-position-pitch = <0>;
+ sensor-position-yaw = <180>;
+ eeprom-src = <&eeprom_rear_aux>;
+ cam_vio-supply = <&camera_vio_ldo>;
+ cam_vana-supply = <&camera_vana_ldo>;
+ cam_vdig-supply = <&camera_ldo>;
+ cam_clk-supply = <&titan_top_gdsc>;
+ regulator-names = "cam_vdig", "cam_vio", "cam_vana",
+ "cam_clk";
+ rgltr-cntrl-support;
+ rgltr-min-voltage = <1352000 1800000 2850000 0>;
+ rgltr-max-voltage = <1352000 1800000 2850000 0>;
+ rgltr-load-current = <105000 0 80000 0>;
+ gpio-no-mux = <0>;
+ pinctrl-names = "cam_default", "cam_suspend";
+ pinctrl-0 = <&cam_sensor_mclk0_active
+ &cam_sensor_rear2_active>;
+ pinctrl-1 = <&cam_sensor_mclk0_suspend
+ &cam_sensor_rear2_suspend>;
+ gpios = <&tlmm 13 0>,
+ <&tlmm 28 0>;
+ gpio-reset = <1>;
+ gpio-req-tbl-num = <0 1>;
+ gpio-req-tbl-flags = <1 0>;
+ gpio-req-tbl-label = "CAMIF_MCLK0",
+ "CAM_RESET1";
+ sensor-mode = <0>;
+ cci-master = <1>;
+ status = "ok";
+ clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+ clock-names = "cam_clk";
+ clock-cntl-level = "turbo";
+ clock-rates = <24000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs605-cdp.dts b/arch/arm64/boot/dts/qcom/qcs605-cdp.dts
index ea10fa0..6c6012e 100644
--- a/arch/arm64/boot/dts/qcom/qcs605-cdp.dts
+++ b/arch/arm64/boot/dts/qcom/qcs605-cdp.dts
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -26,3 +26,47 @@
<0x0001001b 0x0102001a 0x0 0x0>,
<0x0001001b 0x0201011a 0x0 0x0>;
};
+
+&cam_cci {
+ /delete-node/ qcom,cam-sensor@1;
+ qcom,cam-sensor@1 {
+ cell-index = <1>;
+ compatible = "qcom,cam-sensor";
+ reg = <0x1>;
+ csiphy-sd-index = <1>;
+ sensor-position-roll = <90>;
+ sensor-position-pitch = <0>;
+ sensor-position-yaw = <180>;
+ eeprom-src = <&eeprom_rear_aux>;
+ cam_vio-supply = <&camera_vio_ldo>;
+ cam_vana-supply = <&camera_vana_ldo>;
+ cam_vdig-supply = <&camera_ldo>;
+ cam_clk-supply = <&titan_top_gdsc>;
+ regulator-names = "cam_vdig", "cam_vio", "cam_vana",
+ "cam_clk";
+ rgltr-cntrl-support;
+ rgltr-min-voltage = <1352000 1800000 2850000 0>;
+ rgltr-max-voltage = <1352000 1800000 2850000 0>;
+ rgltr-load-current = <105000 0 80000 0>;
+ gpio-no-mux = <0>;
+ pinctrl-names = "cam_default", "cam_suspend";
+ pinctrl-0 = <&cam_sensor_mclk0_active
+ &cam_sensor_rear2_active>;
+ pinctrl-1 = <&cam_sensor_mclk0_suspend
+ &cam_sensor_rear2_suspend>;
+ gpios = <&tlmm 13 0>,
+ <&tlmm 28 0>;
+ gpio-reset = <1>;
+ gpio-req-tbl-num = <0 1>;
+ gpio-req-tbl-flags = <1 0>;
+ gpio-req-tbl-label = "CAMIF_MCLK0",
+ "CAM_RESET1";
+ sensor-mode = <0>;
+ cci-master = <1>;
+ status = "ok";
+ clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+ clock-names = "cam_clk";
+ clock-cntl-level = "turbo";
+ clock-rates = <24000000>;
+ };
+};