[SCSI] pm8001: Fixes for tag alloc, error goto and code cleanup
Allocate right size for bitmap tag,fix error goto and cleanup print
message and undocable commemts. patch attached.
Signed-off-by: Lindar Liu <lindar_liu@usish.com>
Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 1e840fd..1f767a0 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -330,15 +330,12 @@
return 0;
}
/**
- * pm8001_task_exec -execute the task which come from upper level, send the
- * command or data to DMA area and then increase CI,for queuecommand(ssp),
- * it is from upper layer and for smp command,it is from libsas,
- * for ata command it is from libata.
+ * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware.
* @task: the task to be execute.
* @num: if can_queue great than 1, the task can be queued up. for SMP task,
* we always execute one one time.
* @gfp_flags: gfp_flags.
- * @is tmf: if it is task management task.
+ * @is_tmf: if it is task management task.
* @tmf: the task management IU
*/
#define DEV_IS_GONE(pm8001_dev) \
@@ -379,7 +376,7 @@
pm8001_printk("device %016llx not "
"ready.\n", SAS_ADDR(dev->sas_addr)));
}
- rc = SAS_PHY_DOWN;
+ rc = SAS_PHY_DOWN;
goto out_done;
}
rc = pm8001_tag_alloc(pm8001_ha, &tag);
@@ -395,14 +392,14 @@
t->data_dir);
if (!n_elem) {
rc = -ENOMEM;
- goto err_out;
+ goto err_out_tag;
}
}
} else {
n_elem = t->num_scatter;
}
- t->lldd_task = NULL;
+ t->lldd_task = ccb;
ccb->n_elem = n_elem;
ccb->ccb_tag = tag;
ccb->task = t;
@@ -435,7 +432,6 @@
pm8001_printk("rc is %x\n", rc));
goto err_out_tag;
}
- t->lldd_task = ccb;
/* TODO: select normal or high priority */
spin_lock(&t->task_state_lock);
t->task_state_flags |= SAS_TASK_AT_INITIATOR;
@@ -518,8 +514,7 @@
}
/**
- * pm8001_alloc_dev - find the empty pm8001_device structure, allocate and
- * return it for use.
+ * pm8001_alloc_dev - find a empty pm8001_device
* @pm8001_ha: our hba card information
*/
struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
@@ -550,14 +545,16 @@
}
/**
- * pm8001_dev_found_notify - when libsas find a sas domain device, it should
- * tell the LLDD that device is found, and then LLDD register this device to
- * HBA FW by the command "OPC_INB_REG_DEV", after that the HBA will assign
- * a device ID(according to device's sas address) and returned it to LLDD.from
+ * pm8001_dev_found_notify - libsas notify a device is found.
+ * @dev: the device structure which sas layer used.
+ *
+ * when libsas find a sas domain device, it should tell the LLDD that
+ * device is found, and then LLDD register this device to HBA firmware
+ * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
+ * device ID(according to device's sas address) and returned it to LLDD. From
* now on, we communicate with HBA FW with the device ID which HBA assigned
* rather than sas address. it is the neccessary step for our HBA but it is
* the optional for other HBA driver.
- * @dev: the device structure which sas layer used.
*/
static int pm8001_dev_found_notify(struct domain_device *dev)
{
@@ -665,14 +662,15 @@
#define PM8001_TASK_TIMEOUT 20
/**
- * pm8001_exec_internal_tmf_task - when errors or exception happened, we may
- * want to do something, for example abort issued task which result in this
- * execption, this is by calling this function, note it is also with the task
- * execute interface.
+ * pm8001_exec_internal_tmf_task - execute some task management commands.
* @dev: the wanted device.
* @tmf: which task management wanted to be take.
* @para_len: para_len.
* @parameter: ssp task parameter.
+ *
+ * when errors or exception happened, we may want to do something, for example
+ * abort the issued task which result in this execption, it is done by calling
+ * this function, note it is also with the task execute interface.
*/
static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
void *parameter, u32 para_len, struct pm8001_tmf_task *tmf)
@@ -737,9 +735,9 @@
res = -EMSGSIZE;
break;
} else {
- PM8001_IO_DBG(pm8001_ha,
- pm8001_printk(" Task to dev %016llx response: 0x%x"
- "status 0x%x\n",
+ PM8001_EH_DBG(pm8001_ha,
+ pm8001_printk(" Task to dev %016llx response:"
+ "0x%x status 0x%x\n",
SAS_ADDR(dev->sas_addr),
task->task_status.resp,
task->task_status.stat));
@@ -760,7 +758,7 @@
u32 task_tag)
{
int res, retry;
- u32 rc, ccb_tag;
+ u32 ccb_tag;
struct pm8001_ccb_info *ccb;
struct sas_task *task = NULL;
@@ -777,9 +775,9 @@
task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
add_timer(&task->timer);
- rc = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
- if (rc)
- return rc;
+ res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
+ if (res)
+ return res;
ccb = &pm8001_ha->ccb_info[ccb_tag];
ccb->device = pm8001_dev;
ccb->ccb_tag = ccb_tag;
@@ -812,7 +810,7 @@
break;
} else {
- PM8001_IO_DBG(pm8001_ha,
+ PM8001_EH_DBG(pm8001_ha,
pm8001_printk(" Task to dev %016llx response: "
"0x%x status 0x%x\n",
SAS_ADDR(dev->sas_addr),
@@ -1027,11 +1025,11 @@
}
device_id = pm8001_dev->device_id;
PM8001_EH_DBG(pm8001_ha,
- pm8001_printk("abort io to device_id = %d\n", device_id));
- tmf_task.tmf = TMF_ABORT_TASK;
+ pm8001_printk("abort io to deviceid= %d\n", device_id));
+ tmf_task.tmf = TMF_ABORT_TASK;
tmf_task.tag_of_task_to_be_managed = tag;
rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
- rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+ pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
pm8001_dev->sas_device, 0, tag);
} else if (task->task_proto & SAS_PROTOCOL_SATA ||
task->task_proto & SAS_PROTOCOL_STP) {