cfg80211: add P2P Device abstraction

In order to support using a different MAC address
for the P2P Device address we must first have a
P2P Device abstraction that can be assigned a MAC
address.

This abstraction will also be useful to support
offloading P2P operations to the device, e.g.
periodic listen for discoverability.

Currently, the driver is responsible for assigning
a MAC address to the P2P Device, but this could be
changed by allowing a MAC address to be given to
the NEW_INTERFACE command.

As it has no associated netdev, a P2P Device can
only be identified by its wdev identifier but the
previous patches allowed using the wdev identifier
in various APIs, e.g. remain-on-channel.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index fbab7a8..366d9d3 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -449,6 +449,7 @@
 	case NUM_NL80211_IFTYPES:
 	case NL80211_IFTYPE_P2P_CLIENT:
 	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_P2P_DEVICE:
 		/* cannot happen */
 		WARN_ON(1);
 		break;
@@ -1146,6 +1147,8 @@
 	case NL80211_IFTYPE_WDS:
 	case NL80211_IFTYPE_AP_VLAN:
 		break;
+	case NL80211_IFTYPE_P2P_DEVICE:
+		/* not yet supported */
 	case NL80211_IFTYPE_UNSPECIFIED:
 	case NUM_NL80211_IFTYPES:
 		BUG();
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 7dff94e..9a4e4e3 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1390,6 +1390,8 @@
 		case NL80211_IFTYPE_MONITOR:
 			/* ignore virtual */
 			break;
+		case NL80211_IFTYPE_P2P_DEVICE:
+			/* not yet supported */
 		case NL80211_IFTYPE_UNSPECIFIED:
 		case NUM_NL80211_IFTYPES:
 		case NL80211_IFTYPE_P2P_CLIENT:
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index d355f67..2f876b9 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -105,7 +105,7 @@
 
 	ASSERT_WDEV_LOCK(wdev);
 
-	if (!netif_running(wdev->netdev))
+	if (wdev->netdev && !netif_running(wdev->netdev))
 		return;
 
 	switch (wdev->iftype) {
@@ -143,6 +143,11 @@
 	case NL80211_IFTYPE_WDS:
 		/* these interface types don't really have a channel */
 		return;
+	case NL80211_IFTYPE_P2P_DEVICE:
+		if (wdev->wiphy->features &
+				NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL)
+			*chanmode = CHAN_MODE_EXCLUSIVE;
+		return;
 	case NL80211_IFTYPE_UNSPECIFIED:
 	case NUM_NL80211_IFTYPES:
 		WARN_ON(1);
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 31b40cc..91b3004 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -230,9 +230,24 @@
 	rtnl_lock();
 	mutex_lock(&rdev->devlist_mtx);
 
-	list_for_each_entry(wdev, &rdev->wdev_list, list)
-		if (wdev->netdev)
+	list_for_each_entry(wdev, &rdev->wdev_list, list) {
+		if (wdev->netdev) {
 			dev_close(wdev->netdev);
+			continue;
+		}
+		/* otherwise, check iftype */
+		switch (wdev->iftype) {
+		case NL80211_IFTYPE_P2P_DEVICE:
+			if (!wdev->p2p_started)
+				break;
+			rdev->ops->stop_p2p_device(&rdev->wiphy, wdev);
+			wdev->p2p_started = false;
+			rdev->opencount--;
+			break;
+		default:
+			break;
+		}
+	}
 
 	mutex_unlock(&rdev->devlist_mtx);
 	rtnl_unlock();
@@ -407,6 +422,11 @@
 			if (WARN_ON(wiphy->software_iftypes & types))
 				return -EINVAL;
 
+			/* Only a single P2P_DEVICE can be allowed */
+			if (WARN_ON(types & BIT(NL80211_IFTYPE_P2P_DEVICE) &&
+				    c->limits[j].max > 1))
+				return -EINVAL;
+
 			cnt += c->limits[j].max;
 			/*
 			 * Don't advertise an unsupported type
@@ -734,6 +754,35 @@
 	dev_put(wdev->netdev);
 }
 
+void cfg80211_unregister_wdev(struct wireless_dev *wdev)
+{
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+
+	ASSERT_RTNL();
+
+	if (WARN_ON(wdev->netdev))
+		return;
+
+	mutex_lock(&rdev->devlist_mtx);
+	list_del_rcu(&wdev->list);
+	rdev->devlist_generation++;
+
+	switch (wdev->iftype) {
+	case NL80211_IFTYPE_P2P_DEVICE:
+		if (!wdev->p2p_started)
+			break;
+		rdev->ops->stop_p2p_device(&rdev->wiphy, wdev);
+		wdev->p2p_started = false;
+		rdev->opencount--;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		break;
+	}
+	mutex_unlock(&rdev->devlist_mtx);
+}
+EXPORT_SYMBOL(cfg80211_unregister_wdev);
+
 static struct device_type wiphy_type = {
 	.name	= "wlan",
 };
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 1cdb1d5..8fd0242 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -736,7 +736,6 @@
 			  const u8 *buf, size_t len, bool no_cck,
 			  bool dont_wait_for_ack, u64 *cookie)
 {
-	struct net_device *dev = wdev->netdev;
 	const struct ieee80211_mgmt *mgmt;
 	u16 stype;
 
@@ -796,7 +795,7 @@
 		case NL80211_IFTYPE_AP:
 		case NL80211_IFTYPE_P2P_GO:
 		case NL80211_IFTYPE_AP_VLAN:
-			if (!ether_addr_equal(mgmt->bssid, dev->dev_addr))
+			if (!ether_addr_equal(mgmt->bssid, wdev_address(wdev)))
 				err = -EINVAL;
 			break;
 		case NL80211_IFTYPE_MESH_POINT:
@@ -809,6 +808,11 @@
 			 * cfg80211 doesn't track the stations
 			 */
 			break;
+		case NL80211_IFTYPE_P2P_DEVICE:
+			/*
+			 * fall through, P2P device only supports
+			 * public action frames
+			 */
 		default:
 			err = -EOPNOTSUPP;
 			break;
@@ -819,7 +823,7 @@
 			return err;
 	}
 
-	if (!ether_addr_equal(mgmt->sa, dev->dev_addr))
+	if (!ether_addr_equal(mgmt->sa, wdev_address(wdev)))
 		return -EINVAL;
 
 	/* Transmit the Action frame as requested by user space */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 97026f3..787aeaa 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1100,6 +1100,7 @@
 		if (nla_put_u32(msg, i, NL80211_CMD_REGISTER_BEACONS))
 			goto nla_put_failure;
 	}
+	CMD(start_p2p_device, START_P2P_DEVICE);
 
 #ifdef CONFIG_NL80211_TESTMODE
 	CMD(testmode_cmd, TESTMODE);
@@ -1748,13 +1749,13 @@
 
 	if (dev &&
 	    (nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) ||
-	     nla_put_string(msg, NL80211_ATTR_IFNAME, dev->name) ||
-	     nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, dev->dev_addr)))
+	     nla_put_string(msg, NL80211_ATTR_IFNAME, dev->name)))
 		goto nla_put_failure;
 
 	if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
 	    nla_put_u32(msg, NL80211_ATTR_IFTYPE, wdev->iftype) ||
 	    nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev)) ||
+	    nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, wdev_address(wdev)) ||
 	    nla_put_u32(msg, NL80211_ATTR_GENERATION,
 			rdev->devlist_generation ^
 			(cfg80211_rdev_list_generation << 2)))
@@ -2021,8 +2022,10 @@
 		return PTR_ERR(wdev);
 	}
 
-	if (type == NL80211_IFTYPE_MESH_POINT &&
-	    info->attrs[NL80211_ATTR_MESH_ID]) {
+	switch (type) {
+	case NL80211_IFTYPE_MESH_POINT:
+		if (!info->attrs[NL80211_ATTR_MESH_ID])
+			break;
 		wdev_lock(wdev);
 		BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN !=
 			     IEEE80211_MAX_MESH_ID_LEN);
@@ -2031,6 +2034,26 @@
 		memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]),
 		       wdev->mesh_id_up_len);
 		wdev_unlock(wdev);
+		break;
+	case NL80211_IFTYPE_P2P_DEVICE:
+		/*
+		 * P2P Device doesn't have a netdev, so doesn't go
+		 * through the netdev notifier and must be added here
+		 */
+		mutex_init(&wdev->mtx);
+		INIT_LIST_HEAD(&wdev->event_list);
+		spin_lock_init(&wdev->event_lock);
+		INIT_LIST_HEAD(&wdev->mgmt_registrations);
+		spin_lock_init(&wdev->mgmt_registrations_lock);
+
+		mutex_lock(&rdev->devlist_mtx);
+		wdev->identifier = ++rdev->wdev_id;
+		list_add_rcu(&wdev->list, &rdev->wdev_list);
+		rdev->devlist_generation++;
+		mutex_unlock(&rdev->devlist_mtx);
+		break;
+	default:
+		break;
 	}
 
 	if (nl80211_send_iface(msg, info->snd_pid, info->snd_seq, 0,
@@ -6053,6 +6076,7 @@
 	case NL80211_IFTYPE_AP_VLAN:
 	case NL80211_IFTYPE_MESH_POINT:
 	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_P2P_DEVICE:
 		break;
 	default:
 		return -EOPNOTSUPP;
@@ -6099,6 +6123,7 @@
 	case NL80211_IFTYPE_AP_VLAN:
 	case NL80211_IFTYPE_MESH_POINT:
 	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_P2P_DEVICE:
 		break;
 	default:
 		return -EOPNOTSUPP;
@@ -6195,6 +6220,7 @@
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_AP_VLAN:
 	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_P2P_DEVICE:
 		break;
 	default:
 		return -EOPNOTSUPP;
@@ -6810,6 +6836,68 @@
 	return 0;
 }
 
+static int nl80211_start_p2p_device(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct wireless_dev *wdev = info->user_ptr[1];
+	int err;
+
+	if (!rdev->ops->start_p2p_device)
+		return -EOPNOTSUPP;
+
+	if (wdev->iftype != NL80211_IFTYPE_P2P_DEVICE)
+		return -EOPNOTSUPP;
+
+	if (wdev->p2p_started)
+		return 0;
+
+	mutex_lock(&rdev->devlist_mtx);
+	err = cfg80211_can_add_interface(rdev, wdev->iftype);
+	mutex_unlock(&rdev->devlist_mtx);
+	if (err)
+		return err;
+
+	err = rdev->ops->start_p2p_device(&rdev->wiphy, wdev);
+	if (err)
+		return err;
+
+	wdev->p2p_started = true;
+	mutex_lock(&rdev->devlist_mtx);
+	rdev->opencount++;
+	mutex_unlock(&rdev->devlist_mtx);
+
+	return 0;
+}
+
+static int nl80211_stop_p2p_device(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct wireless_dev *wdev = info->user_ptr[1];
+
+	if (wdev->iftype != NL80211_IFTYPE_P2P_DEVICE)
+		return -EOPNOTSUPP;
+
+	if (!rdev->ops->stop_p2p_device)
+		return -EOPNOTSUPP;
+
+	if (!wdev->p2p_started)
+		return 0;
+
+	rdev->ops->stop_p2p_device(&rdev->wiphy, wdev);
+	wdev->p2p_started = false;
+
+	mutex_lock(&rdev->devlist_mtx);
+	rdev->opencount--;
+	mutex_unlock(&rdev->devlist_mtx);
+
+	if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) {
+		rdev->scan_req->aborted = true;
+		___cfg80211_scan_done(rdev, true);
+	}
+
+	return 0;
+}
+
 #define NL80211_FLAG_NEED_WIPHY		0x01
 #define NL80211_FLAG_NEED_NETDEV	0x02
 #define NL80211_FLAG_NEED_RTNL		0x04
@@ -6817,7 +6905,7 @@
 #define NL80211_FLAG_NEED_NETDEV_UP	(NL80211_FLAG_NEED_NETDEV |\
 					 NL80211_FLAG_CHECK_NETDEV_UP)
 #define NL80211_FLAG_NEED_WDEV		0x10
-/* If a netdev is associated, it must be UP */
+/* If a netdev is associated, it must be UP, P2P must be started */
 #define NL80211_FLAG_NEED_WDEV_UP	(NL80211_FLAG_NEED_WDEV |\
 					 NL80211_FLAG_CHECK_NETDEV_UP)
 
@@ -6878,6 +6966,13 @@
 			}
 
 			dev_hold(dev);
+		} else if (ops->internal_flags & NL80211_FLAG_CHECK_NETDEV_UP) {
+			if (!wdev->p2p_started) {
+				mutex_unlock(&cfg80211_mutex);
+				if (rtnl)
+					rtnl_unlock();
+				return -ENETDOWN;
+			}
 		}
 
 		cfg80211_lock_rdev(rdev);
@@ -7439,7 +7534,22 @@
 		.internal_flags = NL80211_FLAG_NEED_NETDEV |
 				  NL80211_FLAG_NEED_RTNL,
 	},
-
+	{
+		.cmd = NL80211_CMD_START_P2P_DEVICE,
+		.doit = nl80211_start_p2p_device,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_WDEV |
+				  NL80211_FLAG_NEED_RTNL,
+	},
+	{
+		.cmd = NL80211_CMD_STOP_P2P_DEVICE,
+		.doit = nl80211_stop_p2p_device,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_WDEV_UP |
+				  NL80211_FLAG_NEED_RTNL,
+	},
 };
 
 static struct genl_multicast_group nl80211_mlme_mcgrp = {
diff --git a/net/wireless/util.c b/net/wireless/util.c
index ce393dd..d7b6722 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -800,6 +800,10 @@
 	if (otype == NL80211_IFTYPE_AP_VLAN)
 		return -EOPNOTSUPP;
 
+	/* cannot change into P2P device type */
+	if (ntype == NL80211_IFTYPE_P2P_DEVICE)
+		return -EOPNOTSUPP;
+
 	if (!rdev->ops->change_virtual_intf ||
 	    !(rdev->wiphy.interface_modes & (1 << ntype)))
 		return -EOPNOTSUPP;
@@ -877,6 +881,9 @@
 		case NUM_NL80211_IFTYPES:
 			/* not happening */
 			break;
+		case NL80211_IFTYPE_P2P_DEVICE:
+			WARN_ON(1);
+			break;
 		}
 	}
 
@@ -1041,8 +1048,15 @@
 	list_for_each_entry(wdev_iter, &rdev->wdev_list, list) {
 		if (wdev_iter == wdev)
 			continue;
-		if (!netif_running(wdev_iter->netdev))
-			continue;
+		if (wdev_iter->netdev) {
+			if (!netif_running(wdev_iter->netdev))
+				continue;
+		} else if (wdev_iter->iftype == NL80211_IFTYPE_P2P_DEVICE) {
+			if (!wdev_iter->p2p_started)
+				continue;
+		} else {
+			WARN_ON(1);
+		}
 
 		if (rdev->wiphy.software_iftypes & BIT(wdev_iter->iftype))
 			continue;