| /* |
| * $Id: hw_settings.S,v 1.3 2005/04/24 18:36:57 starvik Exp $ |
| * |
| * This table is used by some tools to extract hardware parameters. |
| * The table should be included in the kernel and the decompressor. |
| * Don't forget to update the tools if you change this table. |
| * |
| * Copyright (C) 2001 Axis Communications AB |
| * |
| * Authors: Mikael Starvik (starvik@axis.com) |
| */ |
| |
| #include <asm/arch/hwregs/asm/reg_map_asm.h> |
| #include <asm/arch/hwregs/asm/bif_core_defs_asm.h> |
| #include <asm/arch/hwregs/asm/gio_defs_asm.h> |
| |
| .ascii "HW_PARAM_MAGIC" ; Magic number |
| .dword 0xc0004000 ; Kernel start address |
| |
| ; Debug port |
| #ifdef CONFIG_ETRAX_DEBUG_PORT0 |
| .dword 0 |
| #elif defined(CONFIG_ETRAX_DEBUG_PORT1) |
| .dword 1 |
| #elif defined(CONFIG_ETRAX_DEBUG_PORT2) |
| .dword 2 |
| #elif defined(CONFIG_ETRAX_DEBUG_PORT3) |
| .dword 3 |
| #else |
| .dword 4 ; No debug |
| #endif |
| |
| ; Register values |
| .dword REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg) |
| .dword CONFIG_ETRAX_MEM_GRP1_CONFIG |
| .dword REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg) |
| .dword CONFIG_ETRAX_MEM_GRP2_CONFIG |
| .dword REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg) |
| .dword CONFIG_ETRAX_MEM_GRP3_CONFIG |
| .dword REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg) |
| .dword CONFIG_ETRAX_MEM_GRP4_CONFIG |
| .dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp0) |
| .dword CONFIG_ETRAX_SDRAM_GRP0_CONFIG |
| .dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp1) |
| .dword CONFIG_ETRAX_SDRAM_GRP1_CONFIG |
| .dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing) |
| .dword CONFIG_ETRAX_SDRAM_TIMING |
| .dword REG_ADDR(bif_core, regi_bif_core, rw_sdram_cmd) |
| .dword CONFIG_ETRAX_SDRAM_COMMAND |
| |
| .dword REG_ADDR(gio, regi_gio, rw_pa_dout) |
| .dword CONFIG_ETRAX_DEF_GIO_PA_OUT |
| .dword REG_ADDR(gio, regi_gio, rw_pa_oe) |
| .dword CONFIG_ETRAX_DEF_GIO_PA_OE |
| .dword REG_ADDR(gio, regi_gio, rw_pb_dout) |
| .dword CONFIG_ETRAX_DEF_GIO_PB_OUT |
| .dword REG_ADDR(gio, regi_gio, rw_pb_oe) |
| .dword CONFIG_ETRAX_DEF_GIO_PB_OE |
| .dword REG_ADDR(gio, regi_gio, rw_pc_dout) |
| .dword CONFIG_ETRAX_DEF_GIO_PC_OUT |
| .dword REG_ADDR(gio, regi_gio, rw_pc_oe) |
| .dword CONFIG_ETRAX_DEF_GIO_PC_OE |
| .dword REG_ADDR(gio, regi_gio, rw_pd_dout) |
| .dword CONFIG_ETRAX_DEF_GIO_PD_OUT |
| .dword REG_ADDR(gio, regi_gio, rw_pd_oe) |
| .dword CONFIG_ETRAX_DEF_GIO_PD_OE |
| .dword REG_ADDR(gio, regi_gio, rw_pe_dout) |
| .dword CONFIG_ETRAX_DEF_GIO_PE_OUT |
| .dword REG_ADDR(gio, regi_gio, rw_pe_oe) |
| .dword CONFIG_ETRAX_DEF_GIO_PE_OE |
| |
| .dword 0 ; No more register values |