| /******************************************************************* |
| * This file is part of the Emulex Linux Device Driver for * |
| * Fibre Channel Host Bus Adapters. * |
| * Copyright (C) 2004-2006 Emulex. All rights reserved. * |
| * EMULEX and SLI are trademarks of Emulex. * |
| * www.emulex.com * |
| * Portions Copyright (C) 2004-2005 Christoph Hellwig * |
| * * |
| * This program is free software; you can redistribute it and/or * |
| * modify it under the terms of version 2 of the GNU General * |
| * Public License as published by the Free Software Foundation. * |
| * This program is distributed in the hope that it will be useful. * |
| * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * |
| * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * |
| * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * |
| * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * |
| * TO BE LEGALLY INVALID. See the GNU General Public License for * |
| * more details, a copy of which can be found in the file COPYING * |
| * included with this package. * |
| *******************************************************************/ |
| |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/idr.h> |
| #include <linux/interrupt.h> |
| #include <linux/kthread.h> |
| #include <linux/pci.h> |
| #include <linux/spinlock.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_transport_fc.h> |
| #include "lpfc_hw.h" |
| #include "lpfc_sli.h" |
| #include "lpfc_disc.h" |
| #include "lpfc_scsi.h" |
| #include "lpfc.h" |
| #include "lpfc_logmsg.h" |
| #include "lpfc_crtn.h" |
| #include "lpfc_version.h" |
| #include "lpfc_vport.h" |
| |
| inline void lpfc_vport_set_state(struct lpfc_vport *vport, |
| enum fc_vport_state new_state) |
| { |
| struct fc_vport *fc_vport = vport->fc_vport; |
| |
| if (fc_vport) { |
| /* |
| * When the transport defines fc_vport_set state we will replace |
| * this code with the following line |
| */ |
| /* fc_vport_set_state(fc_vport, new_state); */ |
| if (new_state != FC_VPORT_INITIALIZING) |
| fc_vport->vport_last_state = fc_vport->vport_state; |
| fc_vport->vport_state = new_state; |
| } |
| |
| /* for all the error states we will set the invternal state to FAILED */ |
| switch (new_state) { |
| case FC_VPORT_NO_FABRIC_SUPP: |
| case FC_VPORT_NO_FABRIC_RSCS: |
| case FC_VPORT_FABRIC_LOGOUT: |
| case FC_VPORT_FABRIC_REJ_WWN: |
| case FC_VPORT_FAILED: |
| vport->port_state = LPFC_VPORT_FAILED; |
| break; |
| case FC_VPORT_LINKDOWN: |
| vport->port_state = LPFC_VPORT_UNKNOWN; |
| break; |
| default: |
| /* do nothing */ |
| break; |
| } |
| } |
| |
| static int |
| lpfc_alloc_vpi(struct lpfc_hba *phba) |
| { |
| int vpi; |
| |
| spin_lock_irq(&phba->hbalock); |
| /* Start at bit 1 because vpi zero is reserved for the physical port */ |
| vpi = find_next_zero_bit(phba->vpi_bmask, (phba->max_vpi + 1), 1); |
| if (vpi > phba->max_vpi) |
| vpi = 0; |
| else |
| set_bit(vpi, phba->vpi_bmask); |
| spin_unlock_irq(&phba->hbalock); |
| return vpi; |
| } |
| |
| static void |
| lpfc_free_vpi(struct lpfc_hba *phba, int vpi) |
| { |
| spin_lock_irq(&phba->hbalock); |
| clear_bit(vpi, phba->vpi_bmask); |
| spin_unlock_irq(&phba->hbalock); |
| } |
| |
| static int |
| lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport) |
| { |
| LPFC_MBOXQ_t *pmb; |
| MAILBOX_t *mb; |
| struct lpfc_dmabuf *mp; |
| int rc; |
| |
| pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); |
| if (!pmb) { |
| return -ENOMEM; |
| } |
| mb = &pmb->mb; |
| |
| lpfc_read_sparam(phba, pmb, vport->vpi); |
| /* |
| * Grab buffer pointer and clear context1 so we can use |
| * lpfc_sli_issue_box_wait |
| */ |
| mp = (struct lpfc_dmabuf *) pmb->context1; |
| pmb->context1 = NULL; |
| |
| pmb->vport = vport; |
| rc = lpfc_sli_issue_mbox_wait(phba, pmb, phba->fc_ratov * 2); |
| if (rc != MBX_SUCCESS) { |
| if (signal_pending(current)) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT, |
| "1830 Signal aborted mbxCmd x%x\n", |
| mb->mbxCommand); |
| lpfc_mbuf_free(phba, mp->virt, mp->phys); |
| kfree(mp); |
| if (rc != MBX_TIMEOUT) |
| mempool_free(pmb, phba->mbox_mem_pool); |
| return -EINTR; |
| } else { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT, |
| "1818 VPort failed init, mbxCmd x%x " |
| "READ_SPARM mbxStatus x%x, rc = x%x\n", |
| mb->mbxCommand, mb->mbxStatus, rc); |
| lpfc_mbuf_free(phba, mp->virt, mp->phys); |
| kfree(mp); |
| if (rc != MBX_TIMEOUT) |
| mempool_free(pmb, phba->mbox_mem_pool); |
| return -EIO; |
| } |
| } |
| |
| memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm)); |
| memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, |
| sizeof (struct lpfc_name)); |
| memcpy(&vport->fc_portname, &vport->fc_sparam.portName, |
| sizeof (struct lpfc_name)); |
| |
| lpfc_mbuf_free(phba, mp->virt, mp->phys); |
| kfree(mp); |
| mempool_free(pmb, phba->mbox_mem_pool); |
| |
| return 0; |
| } |
| |
| static int |
| lpfc_valid_wwn_format(struct lpfc_hba *phba, struct lpfc_name *wwn, |
| const char *name_type) |
| { |
| /* ensure that IEEE format 1 addresses |
| * contain zeros in bits 59-48 |
| */ |
| if (!((wwn->u.wwn[0] >> 4) == 1 && |
| ((wwn->u.wwn[0] & 0xf) != 0 || (wwn->u.wwn[1] & 0xf) != 0))) |
| return 1; |
| |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, |
| "1822 Invalid %s: %02x:%02x:%02x:%02x:" |
| "%02x:%02x:%02x:%02x\n", |
| name_type, |
| wwn->u.wwn[0], wwn->u.wwn[1], |
| wwn->u.wwn[2], wwn->u.wwn[3], |
| wwn->u.wwn[4], wwn->u.wwn[5], |
| wwn->u.wwn[6], wwn->u.wwn[7]); |
| return 0; |
| } |
| |
| static int |
| lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport) |
| { |
| struct lpfc_vport *vport; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&phba->hbalock, flags); |
| list_for_each_entry(vport, &phba->port_list, listentry) { |
| if (vport == new_vport) |
| continue; |
| /* If they match, return not unique */ |
| if (memcmp(&vport->fc_sparam.portName, |
| &new_vport->fc_sparam.portName, |
| sizeof(struct lpfc_name)) == 0) { |
| spin_unlock_irqrestore(&phba->hbalock, flags); |
| return 0; |
| } |
| } |
| spin_unlock_irqrestore(&phba->hbalock, flags); |
| return 1; |
| } |
| |
| int |
| lpfc_vport_create(struct fc_vport *fc_vport, bool disable) |
| { |
| struct lpfc_nodelist *ndlp; |
| struct Scsi_Host *shost = fc_vport->shost; |
| struct lpfc_vport *pport = (struct lpfc_vport *) shost->hostdata; |
| struct lpfc_hba *phba = pport->phba; |
| struct lpfc_vport *vport = NULL; |
| int instance; |
| int vpi; |
| int rc = VPORT_ERROR; |
| int status; |
| |
| if ((phba->sli_rev < 3) || |
| !(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, |
| "1808 Create VPORT failed: " |
| "NPIV is not enabled: SLImode:%d\n", |
| phba->sli_rev); |
| rc = VPORT_INVAL; |
| goto error_out; |
| } |
| |
| vpi = lpfc_alloc_vpi(phba); |
| if (vpi == 0) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, |
| "1809 Create VPORT failed: " |
| "Max VPORTs (%d) exceeded\n", |
| phba->max_vpi); |
| rc = VPORT_NORESOURCES; |
| goto error_out; |
| } |
| |
| |
| /* Assign an unused board number */ |
| if ((instance = lpfc_get_instance()) < 0) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, |
| "1810 Create VPORT failed: Cannot get " |
| "instance number\n"); |
| lpfc_free_vpi(phba, vpi); |
| rc = VPORT_NORESOURCES; |
| goto error_out; |
| } |
| |
| vport = lpfc_create_port(phba, instance, &fc_vport->dev); |
| if (!vport) { |
| lpfc_printf_log(phba, KERN_ERR, LOG_VPORT, |
| "1811 Create VPORT failed: vpi x%x\n", vpi); |
| lpfc_free_vpi(phba, vpi); |
| rc = VPORT_NORESOURCES; |
| goto error_out; |
| } |
| |
| vport->vpi = vpi; |
| lpfc_debugfs_initialize(vport); |
| |
| if ((status = lpfc_vport_sparm(phba, vport))) { |
| if (status == -EINTR) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1831 Create VPORT Interrupted.\n"); |
| rc = VPORT_ERROR; |
| } else { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1813 Create VPORT failed. " |
| "Cannot get sparam\n"); |
| rc = VPORT_NORESOURCES; |
| } |
| lpfc_free_vpi(phba, vpi); |
| destroy_port(vport); |
| goto error_out; |
| } |
| |
| memcpy(vport->fc_portname.u.wwn, vport->fc_sparam.portName.u.wwn, 8); |
| memcpy(vport->fc_nodename.u.wwn, vport->fc_sparam.nodeName.u.wwn, 8); |
| |
| if (fc_vport->node_name != 0) |
| u64_to_wwn(fc_vport->node_name, vport->fc_nodename.u.wwn); |
| if (fc_vport->port_name != 0) |
| u64_to_wwn(fc_vport->port_name, vport->fc_portname.u.wwn); |
| |
| memcpy(&vport->fc_sparam.portName, vport->fc_portname.u.wwn, 8); |
| memcpy(&vport->fc_sparam.nodeName, vport->fc_nodename.u.wwn, 8); |
| |
| if (!lpfc_valid_wwn_format(phba, &vport->fc_sparam.nodeName, "WWNN") || |
| !lpfc_valid_wwn_format(phba, &vport->fc_sparam.portName, "WWPN")) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1821 Create VPORT failed. " |
| "Invalid WWN format\n"); |
| lpfc_free_vpi(phba, vpi); |
| destroy_port(vport); |
| rc = VPORT_INVAL; |
| goto error_out; |
| } |
| |
| if (!lpfc_unique_wwpn(phba, vport)) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1823 Create VPORT failed. " |
| "Duplicate WWN on HBA\n"); |
| lpfc_free_vpi(phba, vpi); |
| destroy_port(vport); |
| rc = VPORT_INVAL; |
| goto error_out; |
| } |
| |
| *(struct lpfc_vport **)fc_vport->dd_data = vport; |
| vport->fc_vport = fc_vport; |
| |
| if ((phba->link_state < LPFC_LINK_UP) || |
| (phba->fc_topology == TOPOLOGY_LOOP)) { |
| lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); |
| rc = VPORT_OK; |
| goto out; |
| } |
| |
| if (disable) { |
| rc = VPORT_OK; |
| goto out; |
| } |
| |
| /* Use the Physical nodes Fabric NDLP to determine if the link is |
| * up and ready to FDISC. |
| */ |
| ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); |
| if (ndlp && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) { |
| if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) { |
| lpfc_set_disctmo(vport); |
| lpfc_initial_fdisc(vport); |
| } else { |
| lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, |
| "0262 No NPIV Fabric support\n"); |
| } |
| } else { |
| lpfc_vport_set_state(vport, FC_VPORT_FAILED); |
| } |
| rc = VPORT_OK; |
| |
| out: |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1825 Vport Created.\n"); |
| lpfc_host_attrib_init(lpfc_shost_from_vport(vport)); |
| error_out: |
| return rc; |
| } |
| |
| static int |
| disable_vport(struct fc_vport *fc_vport) |
| { |
| struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; |
| struct lpfc_hba *phba = vport->phba; |
| struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL; |
| long timeout; |
| |
| ndlp = lpfc_findnode_did(vport, Fabric_DID); |
| if (ndlp && phba->link_state >= LPFC_LINK_UP) { |
| vport->unreg_vpi_cmpl = VPORT_INVAL; |
| timeout = msecs_to_jiffies(phba->fc_ratov * 2000); |
| if (!lpfc_issue_els_npiv_logo(vport, ndlp)) |
| while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout) |
| timeout = schedule_timeout(timeout); |
| } |
| |
| lpfc_sli_host_down(vport); |
| |
| /* Mark all nodes for discovery so we can remove them by |
| * calling lpfc_cleanup_rpis(vport, 1) |
| */ |
| list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { |
| if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) |
| continue; |
| lpfc_disc_state_machine(vport, ndlp, NULL, |
| NLP_EVT_DEVICE_RECOVERY); |
| } |
| lpfc_cleanup_rpis(vport, 1); |
| |
| lpfc_stop_vport_timers(vport); |
| lpfc_unreg_all_rpis(vport); |
| lpfc_unreg_default_rpis(vport); |
| /* |
| * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) does the |
| * scsi_host_put() to release the vport. |
| */ |
| lpfc_mbx_unreg_vpi(vport); |
| |
| lpfc_vport_set_state(vport, FC_VPORT_DISABLED); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1826 Vport Disabled.\n"); |
| return VPORT_OK; |
| } |
| |
| static int |
| enable_vport(struct fc_vport *fc_vport) |
| { |
| struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; |
| struct lpfc_hba *phba = vport->phba; |
| struct lpfc_nodelist *ndlp = NULL; |
| |
| if ((phba->link_state < LPFC_LINK_UP) || |
| (phba->fc_topology == TOPOLOGY_LOOP)) { |
| lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN); |
| return VPORT_OK; |
| } |
| |
| vport->load_flag |= FC_LOADING; |
| vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; |
| |
| /* Use the Physical nodes Fabric NDLP to determine if the link is |
| * up and ready to FDISC. |
| */ |
| ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); |
| if (ndlp && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) { |
| if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) { |
| lpfc_set_disctmo(vport); |
| lpfc_initial_fdisc(vport); |
| } else { |
| lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, |
| "0264 No NPIV Fabric support\n"); |
| } |
| } else { |
| lpfc_vport_set_state(vport, FC_VPORT_FAILED); |
| } |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1827 Vport Enabled.\n"); |
| return VPORT_OK; |
| } |
| |
| int |
| lpfc_vport_disable(struct fc_vport *fc_vport, bool disable) |
| { |
| if (disable) |
| return disable_vport(fc_vport); |
| else |
| return enable_vport(fc_vport); |
| } |
| |
| |
| int |
| lpfc_vport_delete(struct fc_vport *fc_vport) |
| { |
| struct lpfc_nodelist *ndlp = NULL; |
| struct Scsi_Host *shost = (struct Scsi_Host *) fc_vport->shost; |
| struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data; |
| struct lpfc_hba *phba = vport->phba; |
| long timeout; |
| |
| if (vport->port_type == LPFC_PHYSICAL_PORT) { |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1812 vport_delete failed: Cannot delete " |
| "physical host\n"); |
| return VPORT_ERROR; |
| } |
| /* |
| * If we are not unloading the driver then prevent the vport_delete |
| * from happening until after this vport's discovery is finished. |
| */ |
| if (!(phba->pport->load_flag & FC_UNLOADING)) { |
| int check_count = 0; |
| while (check_count < ((phba->fc_ratov * 3) + 3) && |
| vport->port_state > LPFC_VPORT_FAILED && |
| vport->port_state < LPFC_VPORT_READY) { |
| check_count++; |
| msleep(1000); |
| } |
| if (vport->port_state > LPFC_VPORT_FAILED && |
| vport->port_state < LPFC_VPORT_READY) |
| return -EAGAIN; |
| } |
| /* |
| * This is a bit of a mess. We want to ensure the shost doesn't get |
| * torn down until we're done with the embedded lpfc_vport structure. |
| * |
| * Beyond holding a reference for this function, we also need a |
| * reference for outstanding I/O requests we schedule during delete |
| * processing. But once we scsi_remove_host() we can no longer obtain |
| * a reference through scsi_host_get(). |
| * |
| * So we take two references here. We release one reference at the |
| * bottom of the function -- after delinking the vport. And we |
| * release the other at the completion of the unreg_vpi that get's |
| * initiated after we've disposed of all other resources associated |
| * with the port. |
| */ |
| if (!scsi_host_get(shost) || !scsi_host_get(shost)) |
| return VPORT_INVAL; |
| spin_lock_irq(&phba->hbalock); |
| vport->load_flag |= FC_UNLOADING; |
| spin_unlock_irq(&phba->hbalock); |
| kfree(vport->vname); |
| lpfc_debugfs_terminate(vport); |
| fc_remove_host(lpfc_shost_from_vport(vport)); |
| scsi_remove_host(lpfc_shost_from_vport(vport)); |
| |
| ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); |
| if (ndlp && ndlp->nlp_state == NLP_STE_UNMAPPED_NODE && |
| phba->link_state >= LPFC_LINK_UP) { |
| if (vport->cfg_enable_da_id) { |
| timeout = msecs_to_jiffies(phba->fc_ratov * 2000); |
| if (!lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0)) |
| while (vport->ct_flags && timeout) |
| timeout = schedule_timeout(timeout); |
| else |
| lpfc_printf_log(vport->phba, KERN_WARNING, |
| LOG_VPORT, |
| "1829 CT command failed to " |
| "delete objects on fabric. \n"); |
| } |
| /* First look for the Fabric ndlp */ |
| ndlp = lpfc_findnode_did(vport, Fabric_DID); |
| if (!ndlp) { |
| /* Cannot find existing Fabric ndlp, allocate one */ |
| ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_KERNEL); |
| if (!ndlp) |
| goto skip_logo; |
| lpfc_nlp_init(vport, ndlp, Fabric_DID); |
| } else { |
| lpfc_dequeue_node(vport, ndlp); |
| } |
| vport->unreg_vpi_cmpl = VPORT_INVAL; |
| timeout = msecs_to_jiffies(phba->fc_ratov * 2000); |
| if (!lpfc_issue_els_npiv_logo(vport, ndlp)) |
| while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout) |
| timeout = schedule_timeout(timeout); |
| } |
| |
| skip_logo: |
| lpfc_cleanup(vport); |
| lpfc_sli_host_down(vport); |
| |
| lpfc_stop_vport_timers(vport); |
| lpfc_unreg_all_rpis(vport); |
| |
| if (!(phba->pport->load_flag & FC_UNLOADING)) { |
| lpfc_unreg_default_rpis(vport); |
| /* |
| * Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) |
| * does the scsi_host_put() to release the vport. |
| */ |
| lpfc_mbx_unreg_vpi(vport); |
| } |
| |
| lpfc_free_vpi(phba, vport->vpi); |
| vport->work_port_events = 0; |
| spin_lock_irq(&phba->hbalock); |
| list_del_init(&vport->listentry); |
| spin_unlock_irq(&phba->hbalock); |
| lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT, |
| "1828 Vport Deleted.\n"); |
| scsi_host_put(shost); |
| return VPORT_OK; |
| } |
| |
| struct lpfc_vport ** |
| lpfc_create_vport_work_array(struct lpfc_hba *phba) |
| { |
| struct lpfc_vport *port_iterator; |
| struct lpfc_vport **vports; |
| int index = 0; |
| vports = kzalloc((phba->max_vpi + 1) * sizeof(struct lpfc_vport *), |
| GFP_KERNEL); |
| if (vports == NULL) |
| return NULL; |
| spin_lock_irq(&phba->hbalock); |
| list_for_each_entry(port_iterator, &phba->port_list, listentry) { |
| if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) { |
| lpfc_printf_vlog(port_iterator, KERN_WARNING, LOG_VPORT, |
| "1801 Create vport work array FAILED: " |
| "cannot do scsi_host_get\n"); |
| continue; |
| } |
| vports[index++] = port_iterator; |
| } |
| spin_unlock_irq(&phba->hbalock); |
| return vports; |
| } |
| |
| void |
| lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports) |
| { |
| int i; |
| if (vports == NULL) |
| return; |
| for (i=0; vports[i] != NULL && i <= phba->max_vpi; i++) |
| scsi_host_put(lpfc_shost_from_vport(vports[i])); |
| kfree(vports); |
| } |