mmc: omap_hsmmc: handle vcc and vcc_aux independently
handle vcc and vcc_aux independently to reduce indent.
Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Florian Vaussard <florian.vaussard@epfl.ch>
Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Chris Ball <chris@printf.net>
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 36fb91e..6f4b6b4 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -291,11 +291,12 @@
* chips/cards need an interface voltage rail too.
*/
if (power_on) {
- ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
+ if (host->vcc)
+ ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
/* Enable interface voltage rail, if needed */
if (ret == 0 && host->vcc_aux) {
ret = regulator_enable(host->vcc_aux);
- if (ret < 0)
+ if (ret < 0 && host->vcc)
ret = mmc_regulator_set_ocr(host->mmc,
host->vcc, 0);
}
@@ -303,7 +304,7 @@
/* Shut down the rail */
if (host->vcc_aux)
ret = regulator_disable(host->vcc_aux);
- if (!ret) {
+ if (host->vcc) {
/* Then proceed to shut down the local regulator */
ret = mmc_regulator_set_ocr(host->mmc,
host->vcc, 0);
@@ -323,10 +324,10 @@
reg = devm_regulator_get(host->dev, "vmmc");
if (IS_ERR(reg)) {
- dev_err(host->dev, "vmmc regulator missing\n");
+ dev_err(host->dev, "unable to get vmmc regulator %ld\n",
+ PTR_ERR(reg));
return PTR_ERR(reg);
} else {
- mmc_slot(host).set_power = omap_hsmmc_set_power;
host->vcc = reg;
ocr_value = mmc_regulator_get_ocrmask(reg);
if (!mmc_slot(host).ocr_mask) {
@@ -339,31 +340,26 @@
return -EINVAL;
}
}
+ }
+ mmc_slot(host).set_power = omap_hsmmc_set_power;
- /* Allow an aux regulator */
- reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
- host->vcc_aux = IS_ERR(reg) ? NULL : reg;
+ /* Allow an aux regulator */
+ reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
+ host->vcc_aux = IS_ERR(reg) ? NULL : reg;
- /* For eMMC do not power off when not in sleep state */
- if (mmc_slot(host).no_regulator_off_init)
- return 0;
- /*
- * UGLY HACK: workaround regulator framework bugs.
- * When the bootloader leaves a supply active, it's
- * initialized with zero usecount ... and we can't
- * disable it without first enabling it. Until the
- * framework is fixed, we need a workaround like this
- * (which is safe for MMC, but not in general).
- */
- if (regulator_is_enabled(host->vcc) > 0 ||
- (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
- int vdd = ffs(mmc_slot(host).ocr_mask) - 1;
+ /* For eMMC do not power off when not in sleep state */
+ if (mmc_slot(host).no_regulator_off_init)
+ return 0;
+ /*
+ * To disable boot_on regulator, enable regulator
+ * to increase usecount and then disable it.
+ */
+ if ((host->vcc && regulator_is_enabled(host->vcc) > 0) ||
+ (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
+ int vdd = ffs(mmc_slot(host).ocr_mask) - 1;
- mmc_slot(host).set_power(host->dev, host->slot_id,
- 1, vdd);
- mmc_slot(host).set_power(host->dev, host->slot_id,
- 0, 0);
- }
+ mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
+ mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
}
return 0;