net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control
[ Upstream commit 48f5bccc60675f8426a6159935e8636a1fd89f56 ]
When users set flow control using ethtool the bits are set properly in the
CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n
Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size
reset value. When receive flow control is enabled on a port, the port's
associated FIFO block allocation must be adjusted. The port RX allocation
must increase to accommodate the flow control runout. The TRM recommends
numbers of 5 or 6.
Hence, apply required Port FIFO configuration to
Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during
interface initialization.
Cc: Schuyler Patton <spatton@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 2bd1282..552de9c 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -282,6 +282,10 @@
/* Bit definitions for the CPSW1_TS_SEQ_LTYPE register */
#define CPSW_V1_SEQ_ID_OFS_SHIFT 16
+#define CPSW_MAX_BLKS_TX 15
+#define CPSW_MAX_BLKS_TX_SHIFT 4
+#define CPSW_MAX_BLKS_RX 5
+
struct cpsw_host_regs {
u32 max_blks;
u32 blk_cnt;
@@ -1160,11 +1164,23 @@
switch (cpsw->version) {
case CPSW_VERSION_1:
slave_write(slave, TX_PRIORITY_MAPPING, CPSW1_TX_PRI_MAP);
+ /* Increase RX FIFO size to 5 for supporting fullduplex
+ * flow control mode
+ */
+ slave_write(slave,
+ (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) |
+ CPSW_MAX_BLKS_RX, CPSW1_MAX_BLKS);
break;
case CPSW_VERSION_2:
case CPSW_VERSION_3:
case CPSW_VERSION_4:
slave_write(slave, TX_PRIORITY_MAPPING, CPSW2_TX_PRI_MAP);
+ /* Increase RX FIFO size to 5 for supporting fullduplex
+ * flow control mode
+ */
+ slave_write(slave,
+ (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) |
+ CPSW_MAX_BLKS_RX, CPSW2_MAX_BLKS);
break;
}