V4L/DVB: cx23885: Add preliminary IR Rx support for the HVR-1250 and TeVii S470
Add initial IR Rx support using the intergrated IR controller in the
A/V core of the CX23885 bridge chip.
This initial support is flawed in that I2C transactions should not
be performed in a hard irq context. That will be fixed in a
follow on patch.
The TeVii S470 support is reported to generate perptual interrupts
that renders a user' system nearly unusable. The TeVii S470 IR
will be disabled by default in a follow on patch.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index b083e5d..294a753 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -962,7 +962,7 @@
int cx23885_ir_init(struct cx23885_dev *dev)
{
- static struct v4l2_subdev_io_pin_config ir_pin_cfg[] = {
+ static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = {
{
.flags = V4L2_SUBDEV_IO_PIN_INPUT,
.pin = CX23885_PIN_IR_RX_GPIO19,
@@ -977,12 +977,22 @@
.strength = CX25840_PIN_DRIVE_MEDIUM,
}
};
- const size_t ir_pin_cfg_count = ARRAY_SIZE(ir_pin_cfg);
+ const size_t ir_rxtx_pin_cfg_count = ARRAY_SIZE(ir_rxtx_pin_cfg);
+
+ static struct v4l2_subdev_io_pin_config ir_rx_pin_cfg[] = {
+ {
+ .flags = V4L2_SUBDEV_IO_PIN_INPUT,
+ .pin = CX23885_PIN_IR_RX_GPIO19,
+ .function = CX23885_PAD_IR_RX,
+ .value = 0,
+ .strength = CX25840_PIN_DRIVE_MEDIUM,
+ }
+ };
+ const size_t ir_rx_pin_cfg_count = ARRAY_SIZE(ir_rx_pin_cfg);
struct v4l2_subdev_ir_parameters params;
int ret = 0;
switch (dev->board) {
- case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
@@ -1001,7 +1011,7 @@
break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
- ir_pin_cfg_count, ir_pin_cfg);
+ ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
dev->pci_irqmask |= PCI_MSK_IR;
/*
* For these boards we need to invert the Tx output via the
@@ -1015,6 +1025,26 @@
params.shutdown = true;
v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms);
break;
+ case CX23885_BOARD_TEVII_S470:
+ dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
+ if (dev->sd_ir == NULL) {
+ ret = -ENODEV;
+ break;
+ }
+ v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+ ir_rx_pin_cfg_count, ir_rx_pin_cfg);
+ dev->pci_irqmask |= PCI_MSK_AV_CORE;
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
+ if (dev->sd_ir == NULL) {
+ ret = -ENODEV;
+ break;
+ }
+ v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config,
+ ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg);
+ dev->pci_irqmask |= PCI_MSK_AV_CORE;
+ break;
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
request_module("ir-kbd-i2c");
break;
@@ -1033,6 +1063,13 @@
cx23888_ir_remove(dev);
dev->sd_ir = NULL;
break;
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ dev->pci_irqmask &= ~PCI_MSK_AV_CORE;
+ cx_clear(PCI_INT_MSK, PCI_MSK_AV_CORE);
+ /* sd_ir is a duplicate pointer to the AV Core, just clear it */
+ dev->sd_ir = NULL;
+ break;
}
}
@@ -1044,6 +1081,11 @@
if (dev->sd_ir && (dev->pci_irqmask & PCI_MSK_IR))
cx_set(PCI_INT_MSK, PCI_MSK_IR);
break;
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ if (dev->sd_ir && (dev->pci_irqmask & PCI_MSK_AV_CORE))
+ cx_set(PCI_INT_MSK, PCI_MSK_AV_CORE);
+ break;
}
}
@@ -1189,6 +1231,8 @@
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", "cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index a74c0ab..93e7afb 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -1650,7 +1650,7 @@
u32 ts1_status, ts1_mask;
u32 ts2_status, ts2_mask;
int vida_count = 0, ts1_count = 0, ts2_count = 0, handled = 0;
- bool ir_handled = false;
+ bool subdev_handled;
pci_status = cx_read(PCI_INT_STAT);
pci_mask = cx_read(PCI_INT_MSK);
@@ -1681,7 +1681,7 @@
PCI_MSK_VID_C | PCI_MSK_VID_B | PCI_MSK_VID_A |
PCI_MSK_AUD_INT | PCI_MSK_AUD_EXT |
PCI_MSK_GPIO0 | PCI_MSK_GPIO1 |
- PCI_MSK_IR)) {
+ PCI_MSK_AV_CORE | PCI_MSK_IR)) {
if (pci_status & PCI_MSK_RISC_RD)
dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n",
@@ -1731,6 +1731,10 @@
dprintk(7, " (PCI_MSK_GPIO1 0x%08x)\n",
PCI_MSK_GPIO1);
+ if (pci_status & PCI_MSK_AV_CORE)
+ dprintk(7, " (PCI_MSK_AV_CORE 0x%08x)\n",
+ PCI_MSK_AV_CORE);
+
if (pci_status & PCI_MSK_IR)
dprintk(7, " (PCI_MSK_IR 0x%08x)\n",
PCI_MSK_IR);
@@ -1765,9 +1769,19 @@
handled += cx23885_video_irq(dev, vida_status);
if (pci_status & PCI_MSK_IR) {
+ subdev_handled = false;
v4l2_subdev_call(dev->sd_ir, core, interrupt_service_routine,
- pci_status, &ir_handled);
- if (ir_handled)
+ pci_status, &subdev_handled);
+ if (subdev_handled)
+ handled++;
+ }
+
+ if (pci_status & PCI_MSK_AV_CORE) {
+ subdev_handled = false;
+ v4l2_subdev_call(dev->sd_cx25840,
+ core, interrupt_service_routine,
+ pci_status, &subdev_handled);
+ if (subdev_handled)
handled++;
}
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index 496d751..3f924e2 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -99,8 +99,10 @@
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ case CX23885_BOARD_TEVII_S470:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
/*
- * The only board we handle right now. However other boards
+ * The only boards we handle right now. However other boards
* using the CX2388x integrated IR controller should be similar
*/
break;
@@ -148,6 +150,7 @@
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
/*
* The IR controller on this board only returns pulse widths.
* Any other mode setting will fail to set up the device.
@@ -172,6 +175,37 @@
*/
params.invert_level = true;
break;
+ case CX23885_BOARD_TEVII_S470:
+ /*
+ * The IR controller on this board only returns pulse widths.
+ * Any other mode setting will fail to set up the device.
+ */
+ params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+ params.enable = true;
+ params.interrupt_enable = true;
+ params.shutdown = false;
+
+ /* Setup for a standard NEC protocol */
+ params.carrier_freq = 37917; /* Hz, 455 kHz/12 for NEC */
+ params.carrier_range_lower = 33000; /* Hz */
+ params.carrier_range_upper = 43000; /* Hz */
+ params.duty_cycle = 33; /* percent, 33 percent for NEC */
+
+ /*
+ * NEC max pulse width: (64/3)/(455 kHz/12) * 16 nec_units
+ * (64/3)/(455 kHz/12) * 16 nec_units * 1.375 = 12378022 ns
+ */
+ params.max_pulse_width = 12378022; /* ns */
+
+ /*
+ * NEC noise filter min width: (64/3)/(455 kHz/12) * 1 nec_unit
+ * (64/3)/(455 kHz/12) * 1 nec_units * 0.625 = 351648 ns
+ */
+ params.noise_filter_min_width = 351648; /* ns */
+
+ params.modulation = false;
+ params.invert_level = true;
+ break;
}
v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms);
return 0;
@@ -244,12 +278,20 @@
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
- /* Integrated CX23888 IR controller */
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
+ /* Integrated CX2388[58] IR controller */
driver_type = RC_DRIVER_IR_RAW;
allowed_protos = IR_TYPE_ALL;
/* The grey Hauppauge RC-5 remote */
rc_map = RC_MAP_RC5_HAUPPAUGE_NEW;
break;
+ case CX23885_BOARD_TEVII_S470:
+ /* Integrated CX23885 IR controller */
+ driver_type = RC_DRIVER_IR_RAW;
+ allowed_protos = IR_TYPE_ALL;
+ /* A guess at the remote */
+ rc_map = RC_MAP_TEVII_NEC;
+ break;
default:
return -ENODEV;
}
diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/video/cx23885/cx23885-reg.h
index c0bc9a0..a28772d 100644
--- a/drivers/media/video/cx23885/cx23885-reg.h
+++ b/drivers/media/video/cx23885/cx23885-reg.h
@@ -213,6 +213,7 @@
#define DEV_CNTRL2 0x00040000
#define PCI_MSK_IR (1 << 28)
+#define PCI_MSK_AV_CORE (1 << 27)
#define PCI_MSK_GPIO1 (1 << 24)
#define PCI_MSK_GPIO0 (1 << 23)
#define PCI_MSK_APB_DMA (1 << 12)