hwmon: (it87) Prevent power-off on Shuttle SN68PT
On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan,
but to something else. One user has reported instant system power-off
when changing the PWM2 duty cycle, so we disable it.
I use the board name string as the trigger in case the same board is
ever used in other systems.
This closes lm-sensors ticket #2349:
pwmconfig causes a hard poweroff
http://www.lm-sensors.org/ticket/2349
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index f113308..d793cc0 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -46,6 +46,8 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
+#include <linux/string.h>
+#include <linux/dmi.h>
#include <asm/io.h>
#define DRVNAME "it87"
@@ -236,6 +238,8 @@
/* Values read from Super-I/O config space */
u8 revision;
u8 vid_value;
+ /* Values set based on DMI strings */
+ u8 skip_pwm;
};
/* For each registered chip, we need to keep some data in memory.
@@ -964,6 +968,7 @@
{
int err = -ENODEV;
u16 chip_type;
+ const char *board_vendor, *board_name;
superio_enter();
chip_type = force_id ? force_id : superio_inw(DEVID);
@@ -1022,6 +1027,24 @@
pr_info("it87: in7 is VCCH (+5V Stand-By)\n");
}
+ /* Disable specific features based on DMI strings */
+ board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+ board_name = dmi_get_system_info(DMI_BOARD_NAME);
+ if (board_vendor && board_name) {
+ if (strcmp(board_vendor, "nVIDIA") == 0
+ && strcmp(board_name, "FN68PT") == 0) {
+ /* On the Shuttle SN68PT, FAN_CTL2 is apparently not
+ connected to a fan, but to something else. One user
+ has reported instant system power-off when changing
+ the PWM2 duty cycle, so we disable it.
+ I use the board name string as the trigger in case
+ the same board is ever used in other systems. */
+ pr_info("it87: Disabling pwm2 due to "
+ "hardware constraints\n");
+ sio_data->skip_pwm = (1 << 1);
+ }
+ }
+
exit:
superio_exit();
return err;
@@ -1168,25 +1191,33 @@
}
if (enable_pwm_interface) {
- if ((err = device_create_file(dev,
- &sensor_dev_attr_pwm1_enable.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_pwm2_enable.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_pwm3_enable.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_pwm1.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_pwm2.dev_attr))
- || (err = device_create_file(dev,
- &sensor_dev_attr_pwm3.dev_attr))
- || (err = device_create_file(dev,
- &dev_attr_pwm1_freq))
- || (err = device_create_file(dev,
- &dev_attr_pwm2_freq))
- || (err = device_create_file(dev,
- &dev_attr_pwm3_freq)))
- goto ERROR4;
+ if (!(sio_data->skip_pwm & (1 << 0))) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm1_enable.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm1.dev_attr))
+ || (err = device_create_file(dev,
+ &dev_attr_pwm1_freq)))
+ goto ERROR4;
+ }
+ if (!(sio_data->skip_pwm & (1 << 1))) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm2_enable.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm2.dev_attr))
+ || (err = device_create_file(dev,
+ &dev_attr_pwm2_freq)))
+ goto ERROR4;
+ }
+ if (!(sio_data->skip_pwm & (1 << 2))) {
+ if ((err = device_create_file(dev,
+ &sensor_dev_attr_pwm3_enable.dev_attr))
+ || (err = device_create_file(dev,
+ &sensor_dev_attr_pwm3.dev_attr))
+ || (err = device_create_file(dev,
+ &dev_attr_pwm3_freq)))
+ goto ERROR4;
+ }
}
if (data->type == it8712 || data->type == it8716
@@ -1546,6 +1577,7 @@
unsigned short isa_address=0;
struct it87_sio_data sio_data;
+ memset(&sio_data, 0, sizeof(struct it87_sio_data));
err = it87_find(&isa_address, &sio_data);
if (err)
return err;