[POWERPC] fsl: Convert dts to v1 syntax
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index d84a012..9895043 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -2,7 +2,7 @@
* MPC885 ADS Device Tree Source
*
* Copyright 2006 MontaVista Software, Inc.
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007,2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -10,6 +10,7 @@
* option) any later version.
*/
+/dts-v1/;
/ {
model = "MPC885ADS";
@@ -23,45 +24,45 @@
PowerPC,885@0 {
device_type = "cpu";
- reg = <0>;
- d-cache-line-size = <d#16>;
- i-cache-line-size = <d#16>;
- d-cache-size = <d#8192>;
- i-cache-size = <d#8192>;
+ reg = <0x0>;
+ d-cache-line-size = <16>;
+ i-cache-line-size = <16>;
+ d-cache-size = <8192>;
+ i-cache-size = <8192>;
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
- interrupts = <f 2>; // decrementer interrupt
+ interrupts = <15 2>; // decrementer interrupt
interrupt-parent = <&PIC>;
};
};
memory {
device_type = "memory";
- reg = <0 0>;
+ reg = <0x0 0x0>;
};
localbus@ff000100 {
compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
#address-cells = <2>;
#size-cells = <1>;
- reg = <ff000100 40>;
+ reg = <0xff000100 0x40>;
ranges = <
- 0 0 fe000000 00800000
- 1 0 ff080000 00008000
- 5 0 ff0a0000 00008000
+ 0x0 0x0 0xfe000000 0x800000
+ 0x1 0x0 0xff080000 0x8000
+ 0x5 0x0 0xff0a0000 0x8000
>;
flash@0,0 {
compatible = "jedec-flash";
- reg = <0 0 800000>;
+ reg = <0x0 0x0 0x800000>;
bank-width = <4>;
device-width = <1>;
};
board-control@1,0 {
- reg = <1 0 20 5 300 4>;
+ reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
compatible = "fsl,mpc885ads-bcsr";
};
};
@@ -71,30 +72,30 @@
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 ff000000 00004000>;
+ ranges = <0x0 0xff000000 0x4000>;
bus-frequency = <0>;
// Temporary -- will go away once kernel uses ranges for get_immrbase().
- reg = <ff000000 4000>;
+ reg = <0xff000000 0x4000>;
mdio@e00 {
compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
- reg = <e00 188>;
+ reg = <0xe00 0x188>;
#address-cells = <1>;
#size-cells = <0>;
PHY0: ethernet-phy@0 {
- reg = <0>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy@1 {
- reg = <1>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
PHY2: ethernet-phy@2 {
- reg = <2>;
+ reg = <0x2>;
device_type = "ethernet-phy";
};
};
@@ -103,7 +104,7 @@
device_type = "network";
compatible = "fsl,mpc885-fec-enet",
"fsl,pq1-fec-enet";
- reg = <e00 188>;
+ reg = <0xe00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <3 1>;
interrupt-parent = <&PIC>;
@@ -115,7 +116,7 @@
device_type = "network";
compatible = "fsl,mpc885-fec-enet",
"fsl,pq1-fec-enet";
- reg = <1e00 188>;
+ reg = <0x1e00 0x188>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <7 1>;
interrupt-parent = <&PIC>;
@@ -126,7 +127,7 @@
PIC: interrupt-controller@0 {
interrupt-controller;
#interrupt-cells = <2>;
- reg = <0 24>;
+ reg = <0x0 0x24>;
compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
};
@@ -136,29 +137,29 @@
#size-cells = <2>;
compatible = "fsl,pq-pcmcia";
device_type = "pcmcia";
- reg = <80 80>;
+ reg = <0x80 0x80>;
interrupt-parent = <&PIC>;
- interrupts = <d 1>;
+ interrupts = <13 1>;
};
cpm@9c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc885-cpm", "fsl,cpm1";
- command-proc = <9c0>;
+ command-proc = <0x9c0>;
interrupts = <0>; // cpm error interrupt
interrupt-parent = <&CPM_PIC>;
- reg = <9c0 40>;
+ reg = <0x9c0 0x40>;
ranges;
muram@2000 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 2000 2000>;
+ ranges = <0x0 0x2000 0x2000>;
data@0 {
compatible = "fsl,cpm-muram-data";
- reg = <0 1c00>;
+ reg = <0x0 0x1c00>;
};
};
@@ -167,7 +168,7 @@
"fsl,cpm1-brg",
"fsl,cpm-brg";
clock-frequency = <0>;
- reg = <9f0 10>;
+ reg = <0x9f0 0x10>;
};
CPM_PIC: interrupt-controller@930 {
@@ -175,7 +176,7 @@
#interrupt-cells = <1>;
interrupts = <5 2 0 2>;
interrupt-parent = <&PIC>;
- reg = <930 20>;
+ reg = <0x930 0x20>;
compatible = "fsl,mpc885-cpm-pic",
"fsl,cpm1-pic";
};
@@ -184,34 +185,34 @@
device_type = "serial";
compatible = "fsl,mpc885-smc-uart",
"fsl,cpm1-smc-uart";
- reg = <a80 10 3e80 40>;
+ reg = <0xa80 0x10 0x3e80 0x40>;
interrupts = <4>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <1>;
- fsl,cpm-command = <0090>;
+ fsl,cpm-command = <0x90>;
};
serial@a90 {
device_type = "serial";
compatible = "fsl,mpc885-smc-uart",
"fsl,cpm1-smc-uart";
- reg = <a90 10 3f80 40>;
+ reg = <0xa90 0x10 0x3f80 0x40>;
interrupts = <3>;
interrupt-parent = <&CPM_PIC>;
fsl,cpm-brg = <2>;
- fsl,cpm-command = <00d0>;
+ fsl,cpm-command = <0xd0>;
};
ethernet@a40 {
device_type = "network";
compatible = "fsl,mpc885-scc-enet",
"fsl,cpm1-scc-enet";
- reg = <a40 18 3e00 100>;
+ reg = <0xa40 0x18 0x3e00 0x100>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <1c>;
+ interrupts = <28>;
interrupt-parent = <&CPM_PIC>;
phy-handle = <&PHY2>;
- fsl,cpm-command = <0080>;
+ fsl,cpm-command = <0x80>;
linux,network-index = <2>;
};
};