staging: comedi: dmm32at: remove dmm_inb macro
The macro is just a wrapper for inb(). Just use the inb() directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c
index c139eff..ee4e8ab 100644
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -78,7 +78,6 @@
#define DMM32AT_DIOC 0x0e
#define DMM32AT_DIOCONF 0x0f
-#define dmm_inb(cdev, reg) inb((cdev->iobase)+reg)
#define dmm_outb(cdev, reg, valu) outb(valu, (cdev->iobase)+reg)
/* Board register values. */
@@ -232,7 +231,7 @@
/* wait for circuit to settle */
for (i = 0; i < 40000; i++) {
- status = dmm_inb(dev, DMM32AT_AIRBACK);
+ status = inb(dev->iobase + DMM32AT_AIRBACK);
if ((status & DMM32AT_STATUS) == 0)
break;
}
@@ -247,7 +246,7 @@
dmm_outb(dev, DMM32AT_CONV, 0xff);
/* wait for conversion to end */
for (i = 0; i < 40000; i++) {
- status = dmm_inb(dev, DMM32AT_AISTAT);
+ status = inb(dev->iobase + DMM32AT_AISTAT);
if ((status & DMM32AT_STATUS) == 0)
break;
}
@@ -257,8 +256,8 @@
}
/* read data */
- lsb = dmm_inb(dev, DMM32AT_AILSB);
- msb = dmm_inb(dev, DMM32AT_AIMSB);
+ lsb = inb(dev->iobase + DMM32AT_AILSB);
+ msb = inb(dev->iobase + DMM32AT_AIMSB);
/* invert sign bit to make range unsigned, this is an
idiosyncrasy of the diamond board, it return
@@ -550,7 +549,7 @@
/* wait for circuit to settle */
for (i = 0; i < 40000; i++) {
- status = dmm_inb(dev, DMM32AT_AIRBACK);
+ status = inb(dev->iobase + DMM32AT_AIRBACK);
if ((status & DMM32AT_STATUS) == 0)
break;
}
@@ -600,7 +599,7 @@
return IRQ_HANDLED;
}
- intstat = dmm_inb(dev, DMM32AT_INTCLOCK);
+ intstat = inb(dev->iobase + DMM32AT_INTCLOCK);
if (intstat & DMM32AT_ADINT) {
struct comedi_subdevice *s = dev->read_subdev;
@@ -608,8 +607,8 @@
for (i = 0; i < cmd->chanlist_len; i++) {
/* read data */
- lsb = dmm_inb(dev, DMM32AT_AILSB);
- msb = dmm_inb(dev, DMM32AT_AIMSB);
+ lsb = inb(dev->iobase + DMM32AT_AILSB);
+ msb = inb(dev->iobase + DMM32AT_AIMSB);
/* invert sign bit to make range unsigned */
samp = ((msb ^ 0x0080) << 8) + lsb;
@@ -660,7 +659,7 @@
/* wait for circuit to settle */
for (i = 0; i < 40000; i++) {
- status = dmm_inb(dev, DMM32AT_DACSTAT);
+ status = inb(dev->iobase + DMM32AT_DACSTAT);
if ((status & DMM32AT_DACBUSY) == 0)
break;
}
@@ -669,7 +668,7 @@
return -ETIMEDOUT;
}
/* dummy read to update trigger the output */
- status = dmm_inb(dev, DMM32AT_DACMSB);
+ status = inb(dev->iobase + DMM32AT_DACMSB);
}
@@ -731,11 +730,11 @@
}
/* now read the state back in */
- s->state = dmm_inb(dev, DMM32AT_DIOC);
+ s->state = inb(dev->iobase + DMM32AT_DIOC);
s->state <<= 8;
- s->state |= dmm_inb(dev, DMM32AT_DIOB);
+ s->state |= inb(dev->iobase + DMM32AT_DIOB);
s->state <<= 8;
- s->state |= dmm_inb(dev, DMM32AT_DIOA);
+ s->state |= inb(dev->iobase + DMM32AT_DIOA);
data[1] = s->state;
/* on return, data[1] contains the value of the digital
@@ -836,12 +835,12 @@
udelay(100);
/* read back the values */
- ailo = dmm_inb(dev, DMM32AT_AILOW);
- aihi = dmm_inb(dev, DMM32AT_AIHIGH);
- fifostat = dmm_inb(dev, DMM32AT_FIFOSTAT);
- aistat = dmm_inb(dev, DMM32AT_AISTAT);
- intstat = dmm_inb(dev, DMM32AT_INTCLOCK);
- airback = dmm_inb(dev, DMM32AT_AIRBACK);
+ ailo = inb(dev->iobase + DMM32AT_AILOW);
+ aihi = inb(dev->iobase + DMM32AT_AIHIGH);
+ fifostat = inb(dev->iobase + DMM32AT_FIFOSTAT);
+ aistat = inb(dev->iobase + DMM32AT_AISTAT);
+ intstat = inb(dev->iobase + DMM32AT_INTCLOCK);
+ airback = inb(dev->iobase + DMM32AT_AIRBACK);
printk(KERN_DEBUG "dmm32at: lo=0x%02x hi=0x%02x fifostat=0x%02x\n",
ailo, aihi, fifostat);