ALSA: hda - Add power-welll support for haswell HDA
For Intel Haswell chip, HDA controller and codec have
power well dependency from GPU side. This patch added support
to request/release power well in audio driver. Power save
feature should be enabled to get runtime power saving.
There's deadlock when request_module(i915) in azx_probe.
It looks like:
device_lock(audio pci device) -> azx_probe -> module_request
(or symbol_request) -> modprobe (userspace) -> i915 init ->
drm_pci_init -> pci_register_driver -> bus_add_driver -> driver_attach ->
which in turn tries all locks on pci bus, and when it tries the one on the
audio device, it will deadlock.
This patch introduce a work to store remaining probe stuff, and let
request_module run in safe work context.
Signed-off-by: Wang Xingchao <xingchao.wang@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 3e3126b..35e9f8b 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -62,6 +62,7 @@
#include <linux/vga_switcheroo.h>
#include <linux/firmware.h>
#include "hda_codec.h"
+#include "hda_i915.h"
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
@@ -541,6 +542,10 @@
/* for pending irqs */
struct work_struct irq_pending_work;
+#ifdef CONFIG_SND_HDA_I915
+ struct work_struct probe_work;
+#endif
+
/* reboot notifier (for mysterious hangup problem at power-down) */
struct notifier_block reboot_notifier;
@@ -594,6 +599,7 @@
#define AZX_DCAPS_4K_BDLE_BOUNDARY (1 << 23) /* BDLE in 4k boundary */
#define AZX_DCAPS_COUNT_LPIB_DELAY (1 << 25) /* Take LPIB as delay */
#define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */
+#define AZX_DCAPS_I915_POWERWELL (1 << 27) /* HSW i915 power well support */
/* quirks for Intel PCH */
#define AZX_DCAPS_INTEL_PCH_NOPM \
@@ -2900,6 +2906,8 @@
pci_disable_device(pci);
pci_save_state(pci);
pci_set_power_state(pci, PCI_D3hot);
+ if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
+ hda_display_power(false);
return 0;
}
@@ -2912,6 +2920,8 @@
if (chip->disabled)
return 0;
+ if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
+ hda_display_power(true);
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
if (pci_enable_device(pci) < 0) {
@@ -2944,6 +2954,8 @@
azx_stop_chip(chip);
azx_clear_irq_pending(chip);
+ if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
+ hda_display_power(false);
return 0;
}
@@ -2952,6 +2964,8 @@
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
+ if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
+ hda_display_power(true);
azx_init_pci(chip);
azx_init_chip(chip, 1);
return 0;
@@ -3176,6 +3190,10 @@
if (chip->fw)
release_firmware(chip->fw);
#endif
+ if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
+ hda_display_power(false);
+ hda_i915_exit();
+ }
kfree(chip);
return 0;
@@ -3401,6 +3419,13 @@
}
}
+#ifdef CONFIG_SND_HDA_I915
+static void azx_probe_work(struct work_struct *work)
+{
+ azx_probe_continue(container_of(work, struct azx, probe_work));
+}
+#endif
+
/*
* constructor
*/
@@ -3476,7 +3501,13 @@
return err;
}
+#ifdef CONFIG_SND_HDA_I915
+ /* continue probing in work context as may trigger request module */
+ INIT_WORK(&chip->probe_work, azx_probe_work);
+#endif
+
*rchip = chip;
+
return 0;
}
@@ -3747,6 +3778,16 @@
}
#endif /* CONFIG_SND_HDA_PATCH_LOADER */
+ /* continue probing in work context, avoid request_module deadlock */
+ if (probe_now && (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)) {
+#ifdef CONFIG_SND_HDA_I915
+ probe_now = false;
+ schedule_work(&chip->probe_work);
+#else
+ snd_printk(KERN_ERR SFX "Haswell must build in CONFIG_SND_HDA_I915\n");
+#endif
+ }
+
if (probe_now) {
err = azx_probe_continue(chip);
if (err < 0)
@@ -3769,6 +3810,16 @@
int dev = chip->dev_index;
int err;
+ /* Request power well for Haswell HDA controller and codec */
+ if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
+ err = hda_i915_init();
+ if (err < 0) {
+ snd_printk(KERN_ERR SFX "Error request power-well from i915\n");
+ goto out_free;
+ }
+ hda_display_power(true);
+ }
+
err = azx_first_init(chip);
if (err < 0)
goto out_free;
@@ -3863,11 +3914,14 @@
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Haswell */
{ PCI_DEVICE(0x8086, 0x0a0c),
- .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
+ .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH |
+ AZX_DCAPS_I915_POWERWELL },
{ PCI_DEVICE(0x8086, 0x0c0c),
- .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
+ .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH |
+ AZX_DCAPS_I915_POWERWELL },
{ PCI_DEVICE(0x8086, 0x0d0c),
- .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
+ .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH |
+ AZX_DCAPS_I915_POWERWELL },
/* 5 Series/3400 */
{ PCI_DEVICE(0x8086, 0x3b56),
.driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM },