Merge tag 'drm-fixes-for-v4.7-rc6' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes frlm Dave Airlie:
"Just some AMD and Intel fixes, the AMD ones are further production
Polaris fixes, and the Intel ones fix some early timeouts, some PCI ID
changes and a couple of other fixes.
Still a bit Internet challenged here, hopefully end of next week will
solve it"
* tag 'drm-fixes-for-v4.7-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Fix missing unlock on error in i915_ppgtt_info()
drm/amd/powerplay: workaround for UVD clock issue
drm/amdgpu: add ACLK_CNTL setting for polaris10
drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11.
drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10.
drm/i915: Removing PCI IDs that are no longer listed as Kabylake.
drm/i915: Add more Kabylake PCI IDs.
drm/i915: Avoid early timeout during AUX transfers
drm/i915/hsw: Avoid early timeout during LCPLL disable/restore
drm/i915/lpt: Avoid early timeout during FDI PHY reset
drm/i915/bxt: Avoid early timeout during PLL enable
drm/i915: Refresh cached DP port register value on resume
drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation
drm/amd/powerplay: disable FFC.
drm/amd/powerplay: add some definition for FFC feature on polaris.
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
index e19520c..d9c88d13 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
@@ -1106,6 +1106,10 @@
if (fences == 0 && handles == 0) {
if (adev->pm.dpm_enabled) {
amdgpu_dpm_enable_uvd(adev, false);
+ /* just work around for uvd clock remain high even
+ * when uvd dpm disabled on Polaris10 */
+ if (adev->asic_type == CHIP_POLARIS10)
+ amdgpu_asic_set_uvd_clocks(adev, 0, 0);
} else {
amdgpu_asic_set_uvd_clocks(adev, 0, 0);
}
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index 1a5cbaf..b2ebd4f 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -47,6 +47,8 @@
#include "dce/dce_10_0_d.h"
#include "dce/dce_10_0_sh_mask.h"
+#include "smu/smu_7_1_3_d.h"
+
#define GFX8_NUM_GFX_RINGS 1
#define GFX8_NUM_COMPUTE_RINGS 8
@@ -693,6 +695,7 @@
amdgpu_program_register_sequence(adev,
polaris10_golden_common_all,
(const u32)ARRAY_SIZE(polaris10_golden_common_all));
+ WREG32_SMC(ixCG_ACLK_CNTL, 0x0000001C);
break;
case CHIP_CARRIZO:
amdgpu_program_register_sequence(adev,
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c
index 64ee78f..ec2a7ad 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c
@@ -98,6 +98,7 @@
#define PCIE_BUS_CLK 10000
#define TCLK (PCIE_BUS_CLK / 10)
+#define CEILING_UCHAR(double) ((double-(uint8_t)(double)) > 0 ? (uint8_t)(double+1) : (uint8_t)(double))
static const uint16_t polaris10_clock_stretcher_lookup_table[2][4] =
{ {600, 1050, 3, 0}, {600, 1050, 6, 1} };
@@ -1422,22 +1423,19 @@
table->ACPILevel.Flags &= ~PPSMC_SWSTATE_FLAG_DC;
- if (!data->sclk_dpm_key_disabled) {
- /* Get MinVoltage and Frequency from DPM0,
- * already converted to SMC_UL */
- sclk_frequency = data->dpm_table.sclk_table.dpm_levels[0].value;
- result = polaris10_get_dependency_volt_by_clk(hwmgr,
- table_info->vdd_dep_on_sclk,
- table->ACPILevel.SclkFrequency,
- &table->ACPILevel.MinVoltage, &mvdd);
- PP_ASSERT_WITH_CODE((0 == result),
- "Cannot find ACPI VDDC voltage value "
- "in Clock Dependency Table", );
- } else {
- sclk_frequency = data->vbios_boot_state.sclk_bootup_value;
- table->ACPILevel.MinVoltage =
- data->vbios_boot_state.vddc_bootup_value * VOLTAGE_SCALE;
- }
+
+ /* Get MinVoltage and Frequency from DPM0,
+ * already converted to SMC_UL */
+ sclk_frequency = data->dpm_table.sclk_table.dpm_levels[0].value;
+ result = polaris10_get_dependency_volt_by_clk(hwmgr,
+ table_info->vdd_dep_on_sclk,
+ sclk_frequency,
+ &table->ACPILevel.MinVoltage, &mvdd);
+ PP_ASSERT_WITH_CODE((0 == result),
+ "Cannot find ACPI VDDC voltage value "
+ "in Clock Dependency Table",
+ );
+
result = polaris10_calculate_sclk_params(hwmgr, sclk_frequency, &(table->ACPILevel.SclkSetting));
PP_ASSERT_WITH_CODE(result == 0, "Error retrieving Engine Clock dividers from VBIOS.", return result);
@@ -1462,24 +1460,18 @@
CONVERT_FROM_HOST_TO_SMC_US(table->ACPILevel.SclkSetting.Fcw1_frac);
CONVERT_FROM_HOST_TO_SMC_US(table->ACPILevel.SclkSetting.Sclk_ss_slew_rate);
- if (!data->mclk_dpm_key_disabled) {
- /* Get MinVoltage and Frequency from DPM0, already converted to SMC_UL */
- table->MemoryACPILevel.MclkFrequency =
- data->dpm_table.mclk_table.dpm_levels[0].value;
- result = polaris10_get_dependency_volt_by_clk(hwmgr,
- table_info->vdd_dep_on_mclk,
- table->MemoryACPILevel.MclkFrequency,
- &table->MemoryACPILevel.MinVoltage, &mvdd);
- PP_ASSERT_WITH_CODE((0 == result),
- "Cannot find ACPI VDDCI voltage value "
- "in Clock Dependency Table",
- );
- } else {
- table->MemoryACPILevel.MclkFrequency =
- data->vbios_boot_state.mclk_bootup_value;
- table->MemoryACPILevel.MinVoltage =
- data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE;
- }
+
+ /* Get MinVoltage and Frequency from DPM0, already converted to SMC_UL */
+ table->MemoryACPILevel.MclkFrequency =
+ data->dpm_table.mclk_table.dpm_levels[0].value;
+ result = polaris10_get_dependency_volt_by_clk(hwmgr,
+ table_info->vdd_dep_on_mclk,
+ table->MemoryACPILevel.MclkFrequency,
+ &table->MemoryACPILevel.MinVoltage, &mvdd);
+ PP_ASSERT_WITH_CODE((0 == result),
+ "Cannot find ACPI VDDCI voltage value "
+ "in Clock Dependency Table",
+ );
us_mvdd = 0;
if ((POLARIS10_VOLTAGE_CONTROL_NONE == data->mvdd_control) ||
@@ -1524,6 +1516,7 @@
struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table =
table_info->mm_dep_table;
struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend);
+ uint32_t vddci;
table->VceLevelCount = (uint8_t)(mm_table->count);
table->VceBootLevel = 0;
@@ -1533,9 +1526,18 @@
table->VceLevel[count].MinVoltage = 0;
table->VceLevel[count].MinVoltage |=
(mm_table->entries[count].vddc * VOLTAGE_SCALE) << VDDC_SHIFT;
+
+ if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control)
+ vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table),
+ mm_table->entries[count].vddc - VDDC_VDDCI_DELTA);
+ else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control)
+ vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA;
+ else
+ vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT;
+
+
table->VceLevel[count].MinVoltage |=
- ((mm_table->entries[count].vddc - data->vddc_vddci_delta) *
- VOLTAGE_SCALE) << VDDCI_SHIFT;
+ (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT;
table->VceLevel[count].MinVoltage |= 1 << PHASES_SHIFT;
/*retrieve divider value for VBIOS */
@@ -1564,6 +1566,7 @@
struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table =
table_info->mm_dep_table;
struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend);
+ uint32_t vddci;
table->SamuBootLevel = 0;
table->SamuLevelCount = (uint8_t)(mm_table->count);
@@ -1574,8 +1577,16 @@
table->SamuLevel[count].Frequency = mm_table->entries[count].samclock;
table->SamuLevel[count].MinVoltage |= (mm_table->entries[count].vddc *
VOLTAGE_SCALE) << VDDC_SHIFT;
- table->SamuLevel[count].MinVoltage |= ((mm_table->entries[count].vddc -
- data->vddc_vddci_delta) * VOLTAGE_SCALE) << VDDCI_SHIFT;
+
+ if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control)
+ vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table),
+ mm_table->entries[count].vddc - VDDC_VDDCI_DELTA);
+ else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control)
+ vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA;
+ else
+ vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT;
+
+ table->SamuLevel[count].MinVoltage |= (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT;
table->SamuLevel[count].MinVoltage |= 1 << PHASES_SHIFT;
/* retrieve divider value for VBIOS */
@@ -1658,6 +1669,7 @@
struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table =
table_info->mm_dep_table;
struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend);
+ uint32_t vddci;
table->UvdLevelCount = (uint8_t)(mm_table->count);
table->UvdBootLevel = 0;
@@ -1668,8 +1680,16 @@
table->UvdLevel[count].DclkFrequency = mm_table->entries[count].dclk;
table->UvdLevel[count].MinVoltage |= (mm_table->entries[count].vddc *
VOLTAGE_SCALE) << VDDC_SHIFT;
- table->UvdLevel[count].MinVoltage |= ((mm_table->entries[count].vddc -
- data->vddc_vddci_delta) * VOLTAGE_SCALE) << VDDCI_SHIFT;
+
+ if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control)
+ vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table),
+ mm_table->entries[count].vddc - VDDC_VDDCI_DELTA);
+ else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control)
+ vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA;
+ else
+ vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT;
+
+ table->UvdLevel[count].MinVoltage |= (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT;
table->UvdLevel[count].MinVoltage |= 1 << PHASES_SHIFT;
/* retrieve divider value for VBIOS */
@@ -1690,8 +1710,8 @@
CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].VclkFrequency);
CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].DclkFrequency);
CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].MinVoltage);
-
}
+
return result;
}
@@ -1787,24 +1807,32 @@
ro = efuse * (max -min)/255 + min;
- /* Populate Sclk_CKS_masterEn0_7 and Sclk_voltageOffset */
+ /* Populate Sclk_CKS_masterEn0_7 and Sclk_voltageOffset
+ * there is a little difference in calculating
+ * volt_with_cks with windows */
for (i = 0; i < sclk_table->count; i++) {
data->smc_state_table.Sclk_CKS_masterEn0_7 |=
sclk_table->entries[i].cks_enable << i;
-
- volt_without_cks = (uint32_t)(((ro - 40) * 1000 - 2753594 - sclk_table->entries[i].clk/100 * 136418 /1000) / \
- (sclk_table->entries[i].clk/100 * 1132925 /10000 - 242418)/100);
-
- volt_with_cks = (uint32_t)((ro * 1000 -2396351 - sclk_table->entries[i].clk/100 * 329021/1000) / \
- (sclk_table->entries[i].clk/10000 * 649434 /1000 - 18005)/10);
+ if (hwmgr->chip_id == CHIP_POLARIS10) {
+ volt_without_cks = (uint32_t)((2753594000 + (sclk_table->entries[i].clk/100) * 136418 -(ro - 70) * 1000000) / \
+ (2424180 - (sclk_table->entries[i].clk/100) * 1132925/1000));
+ volt_with_cks = (uint32_t)((279720200 + sclk_table->entries[i].clk * 3232 - (ro - 65) * 100000000) / \
+ (252248000 - sclk_table->entries[i].clk/100 * 115764));
+ } else {
+ volt_without_cks = (uint32_t)((2416794800 + (sclk_table->entries[i].clk/100) * 1476925/10 -(ro - 50) * 1000000) / \
+ (2625416 - (sclk_table->entries[i].clk/100) * 12586807/10000));
+ volt_with_cks = (uint32_t)((2999656000 + sclk_table->entries[i].clk * 392803/100 - (ro - 44) * 1000000) / \
+ (3422454 - sclk_table->entries[i].clk/100 * 18886376/10000));
+ }
if (volt_without_cks >= volt_with_cks)
- volt_offset = (uint8_t)(((volt_without_cks - volt_with_cks +
- sclk_table->entries[i].cks_voffset) * 100 / 625) + 1);
+ volt_offset = (uint8_t)CEILING_UCHAR((volt_without_cks - volt_with_cks +
+ sclk_table->entries[i].cks_voffset) * 100 / 625);
data->smc_state_table.Sclk_voltageOffset[i] = volt_offset;
}
+ data->smc_state_table.LdoRefSel = (table_info->cac_dtp_table->ucCKS_LDO_REFSEL != 0) ? table_info->cac_dtp_table->ucCKS_LDO_REFSEL : 6;
/* Populate CKS Lookup Table */
if (stretch_amount == 1 || stretch_amount == 2 || stretch_amount == 5)
stretch_amount2 = 0;
@@ -2487,6 +2515,8 @@
PP_ASSERT_WITH_CODE((0 == tmp_result),
"Failed to enable VR hot GPIO interrupt!", result = tmp_result);
+ smum_send_msg_to_smc(hwmgr->smumgr, (PPSMC_Msg)PPSMC_HasDisplay);
+
tmp_result = polaris10_enable_sclk_control(hwmgr);
PP_ASSERT_WITH_CODE((0 == tmp_result),
"Failed to enable SCLK control!", result = tmp_result);
@@ -2913,6 +2943,31 @@
return 0;
}
+int polaris10_patch_voltage_workaround(struct pp_hwmgr *hwmgr)
+{
+ struct phm_ppt_v1_information *table_info =
+ (struct phm_ppt_v1_information *)(hwmgr->pptable);
+ struct phm_ppt_v1_clock_voltage_dependency_table *dep_mclk_table =
+ table_info->vdd_dep_on_mclk;
+ struct phm_ppt_v1_voltage_lookup_table *lookup_table =
+ table_info->vddc_lookup_table;
+ uint32_t i;
+
+ if (hwmgr->chip_id == CHIP_POLARIS10 && hwmgr->hw_revision == 0xC7) {
+ if (lookup_table->entries[dep_mclk_table->entries[dep_mclk_table->count-1].vddInd].us_vdd >= 1000)
+ return 0;
+
+ for (i = 0; i < lookup_table->count; i++) {
+ if (lookup_table->entries[i].us_vdd < 0xff01 && lookup_table->entries[i].us_vdd >= 1000) {
+ dep_mclk_table->entries[dep_mclk_table->count-1].vddInd = (uint8_t) i;
+ return 0;
+ }
+ }
+ }
+ return 0;
+}
+
+
int polaris10_hwmgr_backend_init(struct pp_hwmgr *hwmgr)
{
struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend);
@@ -2990,6 +3045,7 @@
polaris10_set_features_platform_caps(hwmgr);
+ polaris10_patch_voltage_workaround(hwmgr);
polaris10_init_dpm_defaults(hwmgr);
/* Get leakage voltage based on leakage ID. */
@@ -4359,6 +4415,15 @@
return 0;
}
+static int polaris10_notify_smc_display(struct pp_hwmgr *hwmgr)
+{
+ struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend);
+
+ smum_send_msg_to_smc_with_parameter(hwmgr->smumgr,
+ (PPSMC_Msg)PPSMC_MSG_SetVBITimeout, data->frame_time_x2);
+ return (smum_send_msg_to_smc(hwmgr->smumgr, (PPSMC_Msg)PPSMC_HasDisplay) == 0) ? 0 : -EINVAL;
+}
+
static int polaris10_set_power_state_tasks(struct pp_hwmgr *hwmgr, const void *input)
{
int tmp_result, result = 0;
@@ -4407,6 +4472,11 @@
"Failed to program memory timing parameters!",
result = tmp_result);
+ tmp_result = polaris10_notify_smc_display(hwmgr);
+ PP_ASSERT_WITH_CODE((0 == tmp_result),
+ "Failed to notify smc display settings!",
+ result = tmp_result);
+
tmp_result = polaris10_unfreeze_sclk_mclk_dpm(hwmgr);
PP_ASSERT_WITH_CODE((0 == tmp_result),
"Failed to unfreeze SCLK MCLK DPM!",
@@ -4441,6 +4511,7 @@
PPSMC_MSG_SetFanPwmMax, us_max_fan_pwm);
}
+
int polaris10_notify_smc_display_change(struct pp_hwmgr *hwmgr, bool has_display)
{
PPSMC_Msg msg = has_display ? (PPSMC_Msg)PPSMC_HasDisplay : (PPSMC_Msg)PPSMC_NoDisplay;
@@ -4460,8 +4531,6 @@
if (num_active_displays > 1) /* to do && (pHwMgr->pPECI->displayConfiguration.bMultiMonitorInSync != TRUE)) */
polaris10_notify_smc_display_change(hwmgr, false);
- else
- polaris10_notify_smc_display_change(hwmgr, true);
return 0;
}
@@ -4502,6 +4571,8 @@
frame_time_in_us = 1000000 / refresh_rate;
pre_vbi_time_in_us = frame_time_in_us - 200 - mode_info.vblank_time_us;
+ data->frame_time_x2 = frame_time_in_us * 2 / 100;
+
display_gap2 = pre_vbi_time_in_us * (ref_clock / 100);
cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_DISPLAY_GAP_CNTL2, display_gap2);
@@ -4510,8 +4581,6 @@
cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, data->soft_regs_start + offsetof(SMU74_SoftRegisters, VBlankTimeout), (frame_time_in_us - pre_vbi_time_in_us));
- polaris10_notify_smc_display_change(hwmgr, num_active_displays != 0);
-
return 0;
}
@@ -4623,7 +4692,7 @@
return 0;
}
- data->need_long_memory_training = true;
+ data->need_long_memory_training = false;
/*
* PPMCME_FirmwareDescriptorEntry *pfd = NULL;
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h
index d717789..afc3434 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.h
@@ -315,6 +315,7 @@
uint32_t avfs_vdroop_override_setting;
bool apply_avfs_cks_off_voltage;
+ uint32_t frame_time_x2;
};
/* To convert to Q8.8 format for firmware */
diff --git a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h
index 28f5714..77e8e33 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/hwmgr.h
@@ -411,6 +411,8 @@
uint8_t ucVr_I2C_Line;
uint8_t ucPlx_I2C_address;
uint8_t ucPlx_I2C_Line;
+ uint32_t usBoostPowerLimit;
+ uint8_t ucCKS_LDO_REFSEL;
};
struct phm_ppm_table {
diff --git a/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h b/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h
index d41d37a..b8f4b73 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/polaris10_ppsmc.h
@@ -392,6 +392,8 @@
#define PPSMC_MSG_SetGpuPllDfsForSclk ((uint16_t) 0x300)
#define PPSMC_MSG_Didt_Block_Function ((uint16_t) 0x301)
+#define PPSMC_MSG_SetVBITimeout ((uint16_t) 0x306)
+
#define PPSMC_MSG_SecureSRBMWrite ((uint16_t) 0x600)
#define PPSMC_MSG_SecureSRBMRead ((uint16_t) 0x601)
#define PPSMC_MSG_SetAddress ((uint16_t) 0x800)
diff --git a/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h b/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h
index b85ff54..899d6d8 100644
--- a/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h
+++ b/drivers/gpu/drm/amd/powerplay/inc/smu74_discrete.h
@@ -270,7 +270,8 @@
uint8_t BootPhases;
uint8_t VRHotLevel;
- uint8_t Reserved1[3];
+ uint8_t LdoRefSel;
+ uint8_t Reserved1[2];
uint16_t FanStartTemperature;
uint16_t FanStopTemperature;
uint16_t MaxVoltage;
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 3269033..1035468 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2365,16 +2365,16 @@
task = get_pid_task(file->pid, PIDTYPE_PID);
if (!task) {
ret = -ESRCH;
- goto out_put;
+ goto out_unlock;
}
seq_printf(m, "\nproc: %s\n", task->comm);
put_task_struct(task);
idr_for_each(&file_priv->context_idr, per_file_ctx,
(void *)(unsigned long)m);
}
+out_unlock:
mutex_unlock(&dev->filelist_mutex);
-out_put:
intel_runtime_pm_put(dev_priv);
mutex_unlock(&dev->struct_mutex);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 56a1637..04452cf 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8447,16 +8447,16 @@
tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
I915_WRITE(SOUTH_CHICKEN2, tmp);
- if (wait_for_atomic_us(I915_READ(SOUTH_CHICKEN2) &
- FDI_MPHY_IOSFSB_RESET_STATUS, 100))
+ if (wait_for_us(I915_READ(SOUTH_CHICKEN2) &
+ FDI_MPHY_IOSFSB_RESET_STATUS, 100))
DRM_ERROR("FDI mPHY reset assert timeout\n");
tmp = I915_READ(SOUTH_CHICKEN2);
tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
I915_WRITE(SOUTH_CHICKEN2, tmp);
- if (wait_for_atomic_us((I915_READ(SOUTH_CHICKEN2) &
- FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
+ if (wait_for_us((I915_READ(SOUTH_CHICKEN2) &
+ FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
DRM_ERROR("FDI mPHY reset de-assert timeout\n");
}
@@ -9440,8 +9440,8 @@
val |= LCPLL_CD_SOURCE_FCLK;
I915_WRITE(LCPLL_CTL, val);
- if (wait_for_atomic_us(I915_READ(LCPLL_CTL) &
- LCPLL_CD_SOURCE_FCLK_DONE, 1))
+ if (wait_for_us(I915_READ(LCPLL_CTL) &
+ LCPLL_CD_SOURCE_FCLK_DONE, 1))
DRM_ERROR("Switching to FCLK failed\n");
val = I915_READ(LCPLL_CTL);
@@ -9514,8 +9514,8 @@
val &= ~LCPLL_CD_SOURCE_FCLK;
I915_WRITE(LCPLL_CTL, val);
- if (wait_for_atomic_us((I915_READ(LCPLL_CTL) &
- LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
+ if (wait_for_us((I915_READ(LCPLL_CTL) &
+ LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
DRM_ERROR("Switching back to LCPLL failed\n");
}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 79cf2d5..40745e38d 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -663,7 +663,7 @@
done = wait_event_timeout(dev_priv->gmbus_wait_queue, C,
msecs_to_jiffies_timeout(10));
else
- done = wait_for_atomic(C, 10) == 0;
+ done = wait_for(C, 10) == 0;
if (!done)
DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n",
has_aux_irq);
@@ -4899,13 +4899,15 @@
void intel_dp_encoder_reset(struct drm_encoder *encoder)
{
- struct intel_dp *intel_dp;
+ struct drm_i915_private *dev_priv = to_i915(encoder->dev);
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+ if (!HAS_DDI(dev_priv))
+ intel_dp->DP = I915_READ(intel_dp->output_reg);
if (to_intel_encoder(encoder)->type != INTEL_OUTPUT_EDP)
return;
- intel_dp = enc_to_intel_dp(encoder);
-
pps_lock(intel_dp);
/*
diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c
index baf6f55..58f60b2 100644
--- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
@@ -1377,8 +1377,8 @@
I915_WRITE(BXT_PORT_PLL_ENABLE(port), temp);
POSTING_READ(BXT_PORT_PLL_ENABLE(port));
- if (wait_for_atomic_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) &
- PORT_PLL_LOCK), 200))
+ if (wait_for_us((I915_READ(BXT_PORT_PLL_ENABLE(port)) & PORT_PLL_LOCK),
+ 200))
DRM_ERROR("PLL %d not locked\n", port);
/*
diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h
index 9094599..33466bf 100644
--- a/include/drm/i915_pciids.h
+++ b/include/drm/i915_pciids.h
@@ -309,6 +309,7 @@
INTEL_VGA_DEVICE(0x5906, info), /* ULT GT1 */ \
INTEL_VGA_DEVICE(0x590E, info), /* ULX GT1 */ \
INTEL_VGA_DEVICE(0x5902, info), /* DT GT1 */ \
+ INTEL_VGA_DEVICE(0x5908, info), /* Halo GT1 */ \
INTEL_VGA_DEVICE(0x590B, info), /* Halo GT1 */ \
INTEL_VGA_DEVICE(0x590A, info) /* SRV GT1 */
@@ -322,15 +323,12 @@
INTEL_VGA_DEVICE(0x591D, info) /* WKS GT2 */
#define INTEL_KBL_GT3_IDS(info) \
+ INTEL_VGA_DEVICE(0x5923, info), /* ULT GT3 */ \
INTEL_VGA_DEVICE(0x5926, info), /* ULT GT3 */ \
- INTEL_VGA_DEVICE(0x592B, info), /* Halo GT3 */ \
- INTEL_VGA_DEVICE(0x592A, info) /* SRV GT3 */
+ INTEL_VGA_DEVICE(0x5927, info) /* ULT GT3 */
#define INTEL_KBL_GT4_IDS(info) \
- INTEL_VGA_DEVICE(0x5932, info), /* DT GT4 */ \
- INTEL_VGA_DEVICE(0x593B, info), /* Halo GT4 */ \
- INTEL_VGA_DEVICE(0x593A, info), /* SRV GT4 */ \
- INTEL_VGA_DEVICE(0x593D, info) /* WKS GT4 */
+ INTEL_VGA_DEVICE(0x593B, info) /* Halo GT4 */
#define INTEL_KBL_IDS(info) \
INTEL_KBL_GT1_IDS(info), \