[ALSA] Add missing KERN_* suffix to printk
Add missing KERN_* suffix to printk.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index f0f8505..970e2aa 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -173,7 +173,7 @@
outb(val, chip->port + 0x0C);
return 0;
}
- snd_printk("dsp_command: timeout (0x%x)\n", val);
+ snd_printk(KERN_ERR "dsp_command: timeout (0x%x)\n", val);
return -EINVAL;
}
@@ -184,7 +184,8 @@
for(i = MILLISECOND/10; i; i--)
if (inb(chip->port + 0x0C) & 0x40)
return inb(chip->port + 0x0A);
- snd_printk("dsp_get_byte failed: 0x%lx = 0x%x!!!\n", chip->port + 0x0A, inb(chip->port + 0x0A));
+ snd_printk(KERN_ERR "dsp_get_byte failed: 0x%lx = 0x%x!!!\n",
+ chip->port + 0x0A, inb(chip->port + 0x0A));
return -ENODEV;
}
@@ -204,7 +205,7 @@
end:
spin_unlock_irqrestore(&chip->reg_lock, flags);
#ifdef REG_DEBUG
- snd_printk("Reg %02x set to %02x\n", reg, data);
+ snd_printk(KERN_DEBUG "Reg %02x set to %02x\n", reg, data);
#endif
return ret;
}
@@ -223,7 +224,7 @@
data = snd_es18xx_dsp_get_byte(chip);
ret = data;
#ifdef REG_DEBUG
- snd_printk("Reg %02x now is %02x (%d)\n", reg, data, ret);
+ snd_printk(KERN_DEBUG "Reg %02x now is %02x (%d)\n", reg, data, ret);
#endif
end:
spin_unlock_irqrestore(&chip->reg_lock, flags);
@@ -259,7 +260,8 @@
if (ret < 0)
goto end;
#ifdef REG_DEBUG
- snd_printk("Reg %02x was %02x, set to %02x (%d)\n", reg, old, new, ret);
+ snd_printk(KERN_DEBUG "Reg %02x was %02x, set to %02x (%d)\n",
+ reg, old, new, ret);
#endif
}
ret = oval;
@@ -277,7 +279,7 @@
outb(data, chip->port + 0x05);
spin_unlock_irqrestore(&chip->mixer_lock, flags);
#ifdef REG_DEBUG
- snd_printk("Mixer reg %02x set to %02x\n", reg, data);
+ snd_printk(KERN_DEBUG "Mixer reg %02x set to %02x\n", reg, data);
#endif
}
@@ -290,7 +292,7 @@
data = inb(chip->port + 0x05);
spin_unlock_irqrestore(&chip->mixer_lock, flags);
#ifdef REG_DEBUG
- snd_printk("Mixer reg %02x now is %02x\n", reg, data);
+ snd_printk(KERN_DEBUG "Mixer reg %02x now is %02x\n", reg, data);
#endif
return data;
}
@@ -309,7 +311,8 @@
new = (old & ~mask) | (val & mask);
outb(new, chip->port + 0x05);
#ifdef REG_DEBUG
- snd_printk("Mixer reg %02x was %02x, set to %02x\n", reg, old, new);
+ snd_printk(KERN_DEBUG "Mixer reg %02x was %02x, set to %02x\n",
+ reg, old, new);
#endif
}
spin_unlock_irqrestore(&chip->mixer_lock, flags);
@@ -329,7 +332,8 @@
new = inb(chip->port + 0x05);
spin_unlock_irqrestore(&chip->mixer_lock, flags);
#ifdef REG_DEBUG
- snd_printk("Mixer reg %02x was %02x, set to %02x, now is %02x\n", reg, old, expected, new);
+ snd_printk(KERN_DEBUG "Mixer reg %02x was %02x, set to %02x, now is %02x\n",
+ reg, old, expected, new);
#endif
return expected == new;
}
@@ -1281,7 +1285,7 @@
outb(reg, chip->ctrl_port);
outb(data, chip->ctrl_port + 1);
#ifdef REG_DEBUG
- snd_printk("Config reg %02x set to %02x\n", reg, data);
+ snd_printk(KERN_DEBUG "Config reg %02x set to %02x\n", reg, data);
#endif
}
@@ -1346,7 +1350,7 @@
irqmask = 3;
break;
default:
- snd_printk("invalid irq %d\n", chip->irq);
+ snd_printk(KERN_ERR "invalid irq %d\n", chip->irq);
return -ENODEV;
}
switch (chip->dma1) {
@@ -1360,7 +1364,7 @@
dma1mask = 3;
break;
default:
- snd_printk("invalid dma1 %d\n", chip->dma1);
+ snd_printk(KERN_ERR "invalid dma1 %d\n", chip->dma1);
return -ENODEV;
}
switch (chip->dma2) {
@@ -1377,7 +1381,7 @@
dma2mask = 3;
break;
default:
- snd_printk("invalid dma2 %d\n", chip->dma2);
+ snd_printk(KERN_ERR "invalid dma2 %d\n", chip->dma2);
return -ENODEV;
}
@@ -1440,7 +1444,7 @@
/* reset */
if (snd_es18xx_reset(chip) < 0) {
- snd_printk("reset at 0x%lx failed!!!\n", chip->port);
+ snd_printk(KERN_ERR "reset at 0x%lx failed!!!\n", chip->port);
return -ENODEV;
}
@@ -1527,7 +1531,7 @@
chip->caps = ES18XX_PCM2 | ES18XX_RECMIX | ES18XX_AUXB | ES18XX_DUPLEX_SAME | ES18XX_HWV;
break;
default:
- snd_printk("[0x%lx] unsupported chip ES%x\n",
+ snd_printk(KERN_ERR "[0x%lx] unsupported chip ES%x\n",
chip->port, chip->version);
return -ENODEV;
}