| /* |
| * Host Wire Adapter: |
| * Driver glue, HWA-specific functions, bridges to WAHC and WUSBHC |
| * |
| * Copyright (C) 2005-2006 Intel Corporation |
| * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version |
| * 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA. |
| * |
| * |
| * The HWA driver is a simple layer that forwards requests to the WAHC |
| * (Wire Adater Host Controller) or WUSBHC (Wireless USB Host |
| * Controller) layers. |
| * |
| * Host Wire Adapter is the 'WUSB 1.0 standard' name for Wireless-USB |
| * Host Controller that is connected to your system via USB (a USB |
| * dongle that implements a USB host...). There is also a Device Wired |
| * Adaptor, DWA (Wireless USB hub) that uses the same mechanism for |
| * transferring data (it is after all a USB host connected via |
| * Wireless USB), we have a common layer called Wire Adapter Host |
| * Controller that does all the hard work. The WUSBHC (Wireless USB |
| * Host Controller) is the part common to WUSB Host Controllers, the |
| * HWA and the PCI-based one, that is implemented following the WHCI |
| * spec. All these layers are implemented in ../wusbcore. |
| * |
| * The main functions are hwahc_op_urb_{en,de}queue(), that pass the |
| * job of converting a URB to a Wire Adapter |
| * |
| * Entry points: |
| * |
| * hwahc_driver_*() Driver initialization, registration and |
| * teardown. |
| * |
| * hwahc_probe() New device came up, create an instance for |
| * it [from device enumeration]. |
| * |
| * hwahc_disconnect() Remove device instance [from device |
| * enumeration]. |
| * |
| * [__]hwahc_op_*() Host-Wire-Adaptor specific functions for |
| * starting/stopping/etc (some might be made also |
| * DWA). |
| */ |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/workqueue.h> |
| #include <linux/wait.h> |
| #include <linux/completion.h> |
| #include "../wusbcore/wa-hc.h" |
| #include "../wusbcore/wusbhc.h" |
| |
| struct hwahc { |
| struct wusbhc wusbhc; /* has to be 1st */ |
| struct wahc wa; |
| }; |
| |
| /* |
| * FIXME should be wusbhc |
| * |
| * NOTE: we need to cache the Cluster ID because later...there is no |
| * way to get it :) |
| */ |
| static int __hwahc_set_cluster_id(struct hwahc *hwahc, u8 cluster_id) |
| { |
| int result; |
| struct wusbhc *wusbhc = &hwahc->wusbhc; |
| struct wahc *wa = &hwahc->wa; |
| struct device *dev = &wa->usb_iface->dev; |
| |
| result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| WUSB_REQ_SET_CLUSTER_ID, |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| cluster_id, |
| wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, |
| NULL, 0, 1000 /* FIXME: arbitrary */); |
| if (result < 0) |
| dev_err(dev, "Cannot set WUSB Cluster ID to 0x%02x: %d\n", |
| cluster_id, result); |
| else |
| wusbhc->cluster_id = cluster_id; |
| dev_info(dev, "Wireless USB Cluster ID set to 0x%02x\n", cluster_id); |
| return result; |
| } |
| |
| static int __hwahc_op_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) |
| { |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| struct wahc *wa = &hwahc->wa; |
| |
| return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| WUSB_REQ_SET_NUM_DNTS, |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| interval << 8 | slots, |
| wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, |
| NULL, 0, 1000 /* FIXME: arbitrary */); |
| } |
| |
| /* |
| * Reset a WUSB host controller and wait for it to complete doing it. |
| * |
| * @usb_hcd: Pointer to WUSB Host Controller instance. |
| * |
| */ |
| static int hwahc_op_reset(struct usb_hcd *usb_hcd) |
| { |
| int result; |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| struct device *dev = &hwahc->wa.usb_iface->dev; |
| |
| mutex_lock(&wusbhc->mutex); |
| wa_nep_disarm(&hwahc->wa); |
| result = __wa_set_feature(&hwahc->wa, WA_RESET); |
| if (result < 0) { |
| dev_err(dev, "error commanding HC to reset: %d\n", result); |
| goto error_unlock; |
| } |
| result = __wa_wait_status(&hwahc->wa, WA_STATUS_RESETTING, 0); |
| if (result < 0) { |
| dev_err(dev, "error waiting for HC to reset: %d\n", result); |
| goto error_unlock; |
| } |
| error_unlock: |
| mutex_unlock(&wusbhc->mutex); |
| return result; |
| } |
| |
| /* |
| * FIXME: break this function up |
| */ |
| static int hwahc_op_start(struct usb_hcd *usb_hcd) |
| { |
| u8 addr; |
| int result; |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| |
| result = -ENOSPC; |
| mutex_lock(&wusbhc->mutex); |
| addr = wusb_cluster_id_get(); |
| if (addr == 0) |
| goto error_cluster_id_get; |
| result = __hwahc_set_cluster_id(hwahc, addr); |
| if (result < 0) |
| goto error_set_cluster_id; |
| |
| usb_hcd->uses_new_polling = 1; |
| usb_hcd->poll_rh = 1; |
| usb_hcd->state = HC_STATE_RUNNING; |
| result = 0; |
| out: |
| mutex_unlock(&wusbhc->mutex); |
| return result; |
| |
| error_set_cluster_id: |
| wusb_cluster_id_put(wusbhc->cluster_id); |
| error_cluster_id_get: |
| goto out; |
| |
| } |
| |
| static int hwahc_op_suspend(struct usb_hcd *usb_hcd, pm_message_t msg) |
| { |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| dev_err(wusbhc->dev, "%s (%p [%p], 0x%lx) UNIMPLEMENTED\n", __func__, |
| usb_hcd, hwahc, *(unsigned long *) &msg); |
| return -ENOSYS; |
| } |
| |
| static int hwahc_op_resume(struct usb_hcd *usb_hcd) |
| { |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| |
| dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, |
| usb_hcd, hwahc); |
| return -ENOSYS; |
| } |
| |
| /* |
| * No need to abort pipes, as when this is called, all the children |
| * has been disconnected and that has done it [through |
| * usb_disable_interface() -> usb_disable_endpoint() -> |
| * hwahc_op_ep_disable() - >rpipe_ep_disable()]. |
| */ |
| static void hwahc_op_stop(struct usb_hcd *usb_hcd) |
| { |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| |
| mutex_lock(&wusbhc->mutex); |
| wusb_cluster_id_put(wusbhc->cluster_id); |
| mutex_unlock(&wusbhc->mutex); |
| } |
| |
| static int hwahc_op_get_frame_number(struct usb_hcd *usb_hcd) |
| { |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| |
| dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, |
| usb_hcd, hwahc); |
| return -ENOSYS; |
| } |
| |
| static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, |
| gfp_t gfp) |
| { |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| |
| return wa_urb_enqueue(&hwahc->wa, urb->ep, urb, gfp); |
| } |
| |
| static int hwahc_op_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, |
| int status) |
| { |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| |
| return wa_urb_dequeue(&hwahc->wa, urb); |
| } |
| |
| /* |
| * Release resources allocated for an endpoint |
| * |
| * If there is an associated rpipe to this endpoint, go ahead and put it. |
| */ |
| static void hwahc_op_endpoint_disable(struct usb_hcd *usb_hcd, |
| struct usb_host_endpoint *ep) |
| { |
| struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| |
| rpipe_ep_disable(&hwahc->wa, ep); |
| } |
| |
| static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc) |
| { |
| int result; |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| struct device *dev = &hwahc->wa.usb_iface->dev; |
| |
| result = __wa_set_feature(&hwahc->wa, WA_ENABLE); |
| if (result < 0) { |
| dev_err(dev, "error commanding HC to start: %d\n", result); |
| goto error_stop; |
| } |
| result = __wa_wait_status(&hwahc->wa, WA_ENABLE, WA_ENABLE); |
| if (result < 0) { |
| dev_err(dev, "error waiting for HC to start: %d\n", result); |
| goto error_stop; |
| } |
| result = wa_nep_arm(&hwahc->wa, GFP_KERNEL); |
| if (result < 0) { |
| dev_err(dev, "cannot listen to notifications: %d\n", result); |
| goto error_stop; |
| } |
| return result; |
| |
| error_stop: |
| __wa_clear_feature(&hwahc->wa, WA_ENABLE); |
| return result; |
| } |
| |
| static void __hwahc_op_wusbhc_stop(struct wusbhc *wusbhc, int delay) |
| { |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| struct wahc *wa = &hwahc->wa; |
| u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; |
| int ret; |
| |
| ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| WUSB_REQ_CHAN_STOP, |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| delay * 1000, |
| iface_no, |
| NULL, 0, 1000 /* FIXME: arbitrary */); |
| if (ret == 0) |
| msleep(delay); |
| |
| wa_nep_disarm(&hwahc->wa); |
| __wa_stop(&hwahc->wa); |
| } |
| |
| /* |
| * Set the UWB MAS allocation for the WUSB cluster |
| * |
| * @stream_index: stream to use (-1 for cancelling the allocation) |
| * @mas: mas bitmap to use |
| */ |
| static int __hwahc_op_bwa_set(struct wusbhc *wusbhc, s8 stream_index, |
| const struct uwb_mas_bm *mas) |
| { |
| int result; |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| struct wahc *wa = &hwahc->wa; |
| struct device *dev = &wa->usb_iface->dev; |
| u8 mas_le[UWB_NUM_MAS/8]; |
| |
| /* Set the stream index */ |
| result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| WUSB_REQ_SET_STREAM_IDX, |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| stream_index, |
| wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, |
| NULL, 0, 1000 /* FIXME: arbitrary */); |
| if (result < 0) { |
| dev_err(dev, "Cannot set WUSB stream index: %d\n", result); |
| goto out; |
| } |
| uwb_mas_bm_copy_le(mas_le, mas); |
| /* Set the MAS allocation */ |
| result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| WUSB_REQ_SET_WUSB_MAS, |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, |
| mas_le, 32, 1000 /* FIXME: arbitrary */); |
| if (result < 0) |
| dev_err(dev, "Cannot set WUSB MAS allocation: %d\n", result); |
| out: |
| return result; |
| } |
| |
| /* |
| * Add an IE to the host's MMC |
| * |
| * @interval: See WUSB1.0[8.5.3.1] |
| * @repeat_cnt: See WUSB1.0[8.5.3.1] |
| * @handle: See WUSB1.0[8.5.3.1] |
| * @wuie: Pointer to the header of the WUSB IE data to add. |
| * MUST BE allocated in a kmalloc buffer (no stack or |
| * vmalloc). |
| * |
| * NOTE: the format of the WUSB IEs for MMCs are different to the |
| * normal MBOA MAC IEs (IE Id + Length in MBOA MAC vs. Length + |
| * Id in WUSB IEs). Standards...you gotta love'em. |
| */ |
| static int __hwahc_op_mmcie_add(struct wusbhc *wusbhc, u8 interval, |
| u8 repeat_cnt, u8 handle, |
| struct wuie_hdr *wuie) |
| { |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| struct wahc *wa = &hwahc->wa; |
| u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; |
| |
| return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| WUSB_REQ_ADD_MMC_IE, |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| interval << 8 | repeat_cnt, |
| handle << 8 | iface_no, |
| wuie, wuie->bLength, 1000 /* FIXME: arbitrary */); |
| } |
| |
| /* |
| * Remove an IE to the host's MMC |
| * |
| * @handle: See WUSB1.0[8.5.3.1] |
| */ |
| static int __hwahc_op_mmcie_rm(struct wusbhc *wusbhc, u8 handle) |
| { |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| struct wahc *wa = &hwahc->wa; |
| u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; |
| return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| WUSB_REQ_REMOVE_MMC_IE, |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 0, handle << 8 | iface_no, |
| NULL, 0, 1000 /* FIXME: arbitrary */); |
| } |
| |
| /* |
| * Update device information for a given fake port |
| * |
| * @port_idx: Fake port to which device is connected (wusbhc index, not |
| * USB port number). |
| */ |
| static int __hwahc_op_dev_info_set(struct wusbhc *wusbhc, |
| struct wusb_dev *wusb_dev) |
| { |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| struct wahc *wa = &hwahc->wa; |
| u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; |
| struct hwa_dev_info *dev_info; |
| int ret; |
| |
| /* fill out the Device Info buffer and send it */ |
| dev_info = kzalloc(sizeof(struct hwa_dev_info), GFP_KERNEL); |
| if (!dev_info) |
| return -ENOMEM; |
| uwb_mas_bm_copy_le(dev_info->bmDeviceAvailability, |
| &wusb_dev->availability); |
| dev_info->bDeviceAddress = wusb_dev->addr; |
| |
| /* |
| * If the descriptors haven't been read yet, use a default PHY |
| * rate of 53.3 Mbit/s only. The correct value will be used |
| * when this will be called again as part of the |
| * authentication process (which occurs after the descriptors |
| * have been read). |
| */ |
| if (wusb_dev->wusb_cap_descr) |
| dev_info->wPHYRates = wusb_dev->wusb_cap_descr->wPHYRates; |
| else |
| dev_info->wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53); |
| |
| ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| WUSB_REQ_SET_DEV_INFO, |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| 0, wusb_dev->port_idx << 8 | iface_no, |
| dev_info, sizeof(struct hwa_dev_info), |
| 1000 /* FIXME: arbitrary */); |
| kfree(dev_info); |
| return ret; |
| } |
| |
| /* |
| * Set host's idea of which encryption (and key) method to use when |
| * talking to ad evice on a given port. |
| * |
| * If key is NULL, it means disable encryption for that "virtual port" |
| * (used when we disconnect). |
| */ |
| static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, |
| const void *key, size_t key_size, |
| u8 key_idx) |
| { |
| int result = -ENOMEM; |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| struct wahc *wa = &hwahc->wa; |
| u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; |
| struct usb_key_descriptor *keyd; |
| size_t keyd_len; |
| |
| keyd_len = sizeof(*keyd) + key_size; |
| keyd = kzalloc(keyd_len, GFP_KERNEL); |
| if (keyd == NULL) |
| return -ENOMEM; |
| |
| keyd->bLength = keyd_len; |
| keyd->bDescriptorType = USB_DT_KEY; |
| keyd->tTKID[0] = (tkid >> 0) & 0xff; |
| keyd->tTKID[1] = (tkid >> 8) & 0xff; |
| keyd->tTKID[2] = (tkid >> 16) & 0xff; |
| memcpy(keyd->bKeyData, key, key_size); |
| |
| result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| USB_REQ_SET_DESCRIPTOR, |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| USB_DT_KEY << 8 | key_idx, |
| port_idx << 8 | iface_no, |
| keyd, keyd_len, 1000 /* FIXME: arbitrary */); |
| |
| memset(keyd, 0, sizeof(*keyd)); /* clear keys etc. */ |
| kfree(keyd); |
| return result; |
| } |
| |
| /* |
| * Set host's idea of which encryption (and key) method to use when |
| * talking to ad evice on a given port. |
| * |
| * If key is NULL, it means disable encryption for that "virtual port" |
| * (used when we disconnect). |
| */ |
| static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, |
| const void *key, size_t key_size) |
| { |
| int result = -ENOMEM; |
| struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| struct wahc *wa = &hwahc->wa; |
| u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; |
| u8 encryption_value; |
| |
| /* Tell the host which key to use to talk to the device */ |
| if (key) { |
| u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_PTK, |
| WUSB_KEY_INDEX_ORIGINATOR_HOST); |
| |
| result = __hwahc_dev_set_key(wusbhc, port_idx, tkid, |
| key, key_size, key_idx); |
| if (result < 0) |
| goto error_set_key; |
| encryption_value = wusbhc->ccm1_etd->bEncryptionValue; |
| } else { |
| /* FIXME: this should come from wusbhc->etd[UNSECURE].value */ |
| encryption_value = 0; |
| } |
| |
| /* Set the encryption type for commmunicating with the device */ |
| result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), |
| USB_REQ_SET_ENCRYPTION, |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, |
| encryption_value, port_idx << 8 | iface_no, |
| NULL, 0, 1000 /* FIXME: arbitrary */); |
| if (result < 0) |
| dev_err(wusbhc->dev, "Can't set host's WUSB encryption for " |
| "port index %u to %s (value %d): %d\n", port_idx, |
| wusb_et_name(wusbhc->ccm1_etd->bEncryptionType), |
| wusbhc->ccm1_etd->bEncryptionValue, result); |
| error_set_key: |
| return result; |
| } |
| |
| /* |
| * Set host's GTK key |
| */ |
| static int __hwahc_op_set_gtk(struct wusbhc *wusbhc, u32 tkid, |
| const void *key, size_t key_size) |
| { |
| u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK, |
| WUSB_KEY_INDEX_ORIGINATOR_HOST); |
| |
| return __hwahc_dev_set_key(wusbhc, 0, tkid, key, key_size, key_idx); |
| } |
| |
| /* |
| * Get the Wire Adapter class-specific descriptor |
| * |
| * NOTE: this descriptor comes with the big bundled configuration |
| * descriptor that includes the interfaces' and endpoints', so |
| * we just look for it in the cached copy kept by the USB stack. |
| * |
| * NOTE2: We convert LE fields to CPU order. |
| */ |
| static int wa_fill_descr(struct wahc *wa) |
| { |
| int result; |
| struct device *dev = &wa->usb_iface->dev; |
| char *itr; |
| struct usb_device *usb_dev = wa->usb_dev; |
| struct usb_descriptor_header *hdr; |
| struct usb_wa_descriptor *wa_descr; |
| size_t itr_size, actconfig_idx; |
| |
| actconfig_idx = (usb_dev->actconfig - usb_dev->config) / |
| sizeof(usb_dev->config[0]); |
| itr = usb_dev->rawdescriptors[actconfig_idx]; |
| itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); |
| while (itr_size >= sizeof(*hdr)) { |
| hdr = (struct usb_descriptor_header *) itr; |
| dev_dbg(dev, "Extra device descriptor: " |
| "type %02x/%u bytes @ %zu (%zu left)\n", |
| hdr->bDescriptorType, hdr->bLength, |
| (itr - usb_dev->rawdescriptors[actconfig_idx]), |
| itr_size); |
| if (hdr->bDescriptorType == USB_DT_WIRE_ADAPTER) |
| goto found; |
| itr += hdr->bLength; |
| itr_size -= hdr->bLength; |
| } |
| dev_err(dev, "cannot find Wire Adapter Class descriptor\n"); |
| return -ENODEV; |
| |
| found: |
| result = -EINVAL; |
| if (hdr->bLength > itr_size) { /* is it available? */ |
| dev_err(dev, "incomplete Wire Adapter Class descriptor " |
| "(%zu bytes left, %u needed)\n", |
| itr_size, hdr->bLength); |
| goto error; |
| } |
| if (hdr->bLength < sizeof(*wa->wa_descr)) { |
| dev_err(dev, "short Wire Adapter Class descriptor\n"); |
| goto error; |
| } |
| wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr; |
| /* Make LE fields CPU order */ |
| wa_descr->bcdWAVersion = le16_to_cpu(wa_descr->bcdWAVersion); |
| wa_descr->wNumRPipes = le16_to_cpu(wa_descr->wNumRPipes); |
| wa_descr->wRPipeMaxBlock = le16_to_cpu(wa_descr->wRPipeMaxBlock); |
| if (wa_descr->bcdWAVersion > 0x0100) |
| dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n", |
| wa_descr->bcdWAVersion & 0xff00 >> 8, |
| wa_descr->bcdWAVersion & 0x00ff); |
| result = 0; |
| error: |
| return result; |
| } |
| |
| static struct hc_driver hwahc_hc_driver = { |
| .description = "hwa-hcd", |
| .product_desc = "Wireless USB HWA host controller", |
| .hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd), |
| .irq = NULL, /* FIXME */ |
| .flags = HCD_USB2, /* FIXME */ |
| .reset = hwahc_op_reset, |
| .start = hwahc_op_start, |
| .pci_suspend = hwahc_op_suspend, |
| .pci_resume = hwahc_op_resume, |
| .stop = hwahc_op_stop, |
| .get_frame_number = hwahc_op_get_frame_number, |
| .urb_enqueue = hwahc_op_urb_enqueue, |
| .urb_dequeue = hwahc_op_urb_dequeue, |
| .endpoint_disable = hwahc_op_endpoint_disable, |
| |
| .hub_status_data = wusbhc_rh_status_data, |
| .hub_control = wusbhc_rh_control, |
| .bus_suspend = wusbhc_rh_suspend, |
| .bus_resume = wusbhc_rh_resume, |
| .start_port_reset = wusbhc_rh_start_port_reset, |
| }; |
| |
| static int hwahc_security_create(struct hwahc *hwahc) |
| { |
| int result; |
| struct wusbhc *wusbhc = &hwahc->wusbhc; |
| struct usb_device *usb_dev = hwahc->wa.usb_dev; |
| struct device *dev = &usb_dev->dev; |
| struct usb_security_descriptor *secd; |
| struct usb_encryption_descriptor *etd; |
| void *itr, *top; |
| size_t itr_size, needed, bytes; |
| u8 index; |
| char buf[64]; |
| |
| /* Find the host's security descriptors in the config descr bundle */ |
| index = (usb_dev->actconfig - usb_dev->config) / |
| sizeof(usb_dev->config[0]); |
| itr = usb_dev->rawdescriptors[index]; |
| itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); |
| top = itr + itr_size; |
| result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index], |
| le16_to_cpu(usb_dev->actconfig->desc.wTotalLength), |
| USB_DT_SECURITY, (void **) &secd); |
| if (result == -1) { |
| dev_warn(dev, "BUG? WUSB host has no security descriptors\n"); |
| return 0; |
| } |
| needed = sizeof(*secd); |
| if (top - (void *)secd < needed) { |
| dev_err(dev, "BUG? Not enough data to process security " |
| "descriptor header (%zu bytes left vs %zu needed)\n", |
| top - (void *) secd, needed); |
| return 0; |
| } |
| needed = le16_to_cpu(secd->wTotalLength); |
| if (top - (void *)secd < needed) { |
| dev_err(dev, "BUG? Not enough data to process security " |
| "descriptors (%zu bytes left vs %zu needed)\n", |
| top - (void *) secd, needed); |
| return 0; |
| } |
| /* Walk over the sec descriptors and store CCM1's on wusbhc */ |
| itr = (void *) secd + sizeof(*secd); |
| top = (void *) secd + le16_to_cpu(secd->wTotalLength); |
| index = 0; |
| bytes = 0; |
| while (itr < top) { |
| etd = itr; |
| if (top - itr < sizeof(*etd)) { |
| dev_err(dev, "BUG: bad host security descriptor; " |
| "not enough data (%zu vs %zu left)\n", |
| top - itr, sizeof(*etd)); |
| break; |
| } |
| if (etd->bLength < sizeof(*etd)) { |
| dev_err(dev, "BUG: bad host encryption descriptor; " |
| "descriptor is too short " |
| "(%zu vs %zu needed)\n", |
| (size_t)etd->bLength, sizeof(*etd)); |
| break; |
| } |
| itr += etd->bLength; |
| bytes += snprintf(buf + bytes, sizeof(buf) - bytes, |
| "%s (0x%02x) ", |
| wusb_et_name(etd->bEncryptionType), |
| etd->bEncryptionValue); |
| wusbhc->ccm1_etd = etd; |
| } |
| dev_info(dev, "supported encryption types: %s\n", buf); |
| if (wusbhc->ccm1_etd == NULL) { |
| dev_err(dev, "E: host doesn't support CCM-1 crypto\n"); |
| return 0; |
| } |
| /* Pretty print what we support */ |
| return 0; |
| } |
| |
| static void hwahc_security_release(struct hwahc *hwahc) |
| { |
| /* nothing to do here so far... */ |
| } |
| |
| static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface) |
| { |
| int result; |
| struct device *dev = &iface->dev; |
| struct wusbhc *wusbhc = &hwahc->wusbhc; |
| struct wahc *wa = &hwahc->wa; |
| struct usb_device *usb_dev = interface_to_usbdev(iface); |
| |
| wa->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */ |
| wa->usb_iface = usb_get_intf(iface); |
| wusbhc->dev = dev; |
| wusbhc->uwb_rc = uwb_rc_get_by_grandpa(iface->dev.parent); |
| if (wusbhc->uwb_rc == NULL) { |
| result = -ENODEV; |
| dev_err(dev, "Cannot get associated UWB Host Controller\n"); |
| goto error_rc_get; |
| } |
| result = wa_fill_descr(wa); /* Get the device descriptor */ |
| if (result < 0) |
| goto error_fill_descriptor; |
| if (wa->wa_descr->bNumPorts > USB_MAXCHILDREN) { |
| dev_err(dev, "FIXME: USB_MAXCHILDREN too low for WUSB " |
| "adapter (%u ports)\n", wa->wa_descr->bNumPorts); |
| wusbhc->ports_max = USB_MAXCHILDREN; |
| } else { |
| wusbhc->ports_max = wa->wa_descr->bNumPorts; |
| } |
| wusbhc->mmcies_max = wa->wa_descr->bNumMMCIEs; |
| wusbhc->start = __hwahc_op_wusbhc_start; |
| wusbhc->stop = __hwahc_op_wusbhc_stop; |
| wusbhc->mmcie_add = __hwahc_op_mmcie_add; |
| wusbhc->mmcie_rm = __hwahc_op_mmcie_rm; |
| wusbhc->dev_info_set = __hwahc_op_dev_info_set; |
| wusbhc->bwa_set = __hwahc_op_bwa_set; |
| wusbhc->set_num_dnts = __hwahc_op_set_num_dnts; |
| wusbhc->set_ptk = __hwahc_op_set_ptk; |
| wusbhc->set_gtk = __hwahc_op_set_gtk; |
| result = hwahc_security_create(hwahc); |
| if (result < 0) { |
| dev_err(dev, "Can't initialize security: %d\n", result); |
| goto error_security_create; |
| } |
| wa->wusb = wusbhc; /* FIXME: ugly, need to fix */ |
| result = wusbhc_create(&hwahc->wusbhc); |
| if (result < 0) { |
| dev_err(dev, "Can't create WUSB HC structures: %d\n", result); |
| goto error_wusbhc_create; |
| } |
| result = wa_create(&hwahc->wa, iface); |
| if (result < 0) |
| goto error_wa_create; |
| return 0; |
| |
| error_wa_create: |
| wusbhc_destroy(&hwahc->wusbhc); |
| error_wusbhc_create: |
| /* WA Descr fill allocs no resources */ |
| error_security_create: |
| error_fill_descriptor: |
| uwb_rc_put(wusbhc->uwb_rc); |
| error_rc_get: |
| usb_put_intf(iface); |
| usb_put_dev(usb_dev); |
| return result; |
| } |
| |
| static void hwahc_destroy(struct hwahc *hwahc) |
| { |
| struct wusbhc *wusbhc = &hwahc->wusbhc; |
| |
| mutex_lock(&wusbhc->mutex); |
| __wa_destroy(&hwahc->wa); |
| wusbhc_destroy(&hwahc->wusbhc); |
| hwahc_security_release(hwahc); |
| hwahc->wusbhc.dev = NULL; |
| uwb_rc_put(wusbhc->uwb_rc); |
| usb_put_intf(hwahc->wa.usb_iface); |
| usb_put_dev(hwahc->wa.usb_dev); |
| mutex_unlock(&wusbhc->mutex); |
| } |
| |
| static void hwahc_init(struct hwahc *hwahc) |
| { |
| wa_init(&hwahc->wa); |
| } |
| |
| static int hwahc_probe(struct usb_interface *usb_iface, |
| const struct usb_device_id *id) |
| { |
| int result; |
| struct usb_hcd *usb_hcd; |
| struct wusbhc *wusbhc; |
| struct hwahc *hwahc; |
| struct device *dev = &usb_iface->dev; |
| |
| result = -ENOMEM; |
| usb_hcd = usb_create_hcd(&hwahc_hc_driver, &usb_iface->dev, "wusb-hwa"); |
| if (usb_hcd == NULL) { |
| dev_err(dev, "unable to allocate instance\n"); |
| goto error_alloc; |
| } |
| usb_hcd->wireless = 1; |
| usb_hcd->flags |= HCD_FLAG_SAW_IRQ; |
| wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| hwahc_init(hwahc); |
| result = hwahc_create(hwahc, usb_iface); |
| if (result < 0) { |
| dev_err(dev, "Cannot initialize internals: %d\n", result); |
| goto error_hwahc_create; |
| } |
| result = usb_add_hcd(usb_hcd, 0, 0); |
| if (result < 0) { |
| dev_err(dev, "Cannot add HCD: %d\n", result); |
| goto error_add_hcd; |
| } |
| result = wusbhc_b_create(&hwahc->wusbhc); |
| if (result < 0) { |
| dev_err(dev, "Cannot setup phase B of WUSBHC: %d\n", result); |
| goto error_wusbhc_b_create; |
| } |
| return 0; |
| |
| error_wusbhc_b_create: |
| usb_remove_hcd(usb_hcd); |
| error_add_hcd: |
| hwahc_destroy(hwahc); |
| error_hwahc_create: |
| usb_put_hcd(usb_hcd); |
| error_alloc: |
| return result; |
| } |
| |
| static void hwahc_disconnect(struct usb_interface *usb_iface) |
| { |
| struct usb_hcd *usb_hcd; |
| struct wusbhc *wusbhc; |
| struct hwahc *hwahc; |
| |
| usb_hcd = usb_get_intfdata(usb_iface); |
| wusbhc = usb_hcd_to_wusbhc(usb_hcd); |
| hwahc = container_of(wusbhc, struct hwahc, wusbhc); |
| |
| wusbhc_b_destroy(&hwahc->wusbhc); |
| usb_remove_hcd(usb_hcd); |
| hwahc_destroy(hwahc); |
| usb_put_hcd(usb_hcd); |
| } |
| |
| static struct usb_device_id hwahc_id_table[] = { |
| /* FIXME: use class labels for this */ |
| { USB_INTERFACE_INFO(0xe0, 0x02, 0x01), }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(usb, hwahc_id_table); |
| |
| static struct usb_driver hwahc_driver = { |
| .name = "hwa-hc", |
| .probe = hwahc_probe, |
| .disconnect = hwahc_disconnect, |
| .id_table = hwahc_id_table, |
| }; |
| |
| static int __init hwahc_driver_init(void) |
| { |
| return usb_register(&hwahc_driver); |
| } |
| module_init(hwahc_driver_init); |
| |
| static void __exit hwahc_driver_exit(void) |
| { |
| usb_deregister(&hwahc_driver); |
| } |
| module_exit(hwahc_driver_exit); |
| |
| |
| MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); |
| MODULE_DESCRIPTION("Host Wired Adapter USB Host Control Driver"); |
| MODULE_LICENSE("GPL"); |